bd00396233
boards: nxp: fix the is25wp064 flash size in DTS.
...
- fixes is25wp064 flash size in DTS. It must be 8 MBytes (64MBits).
- uses DT_SIZE_M() macro instead of an absolute value.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
2 weeks ago
a93a80be82
drivers: nxp: flexspi: fix hyper flash hang issue
...
CS hold time parameter is not correct which may cause bus fault
randomly.
System hang during status register reading after flash progromming which
is caused by parameter accessing in XIP mode.
Add dummy delay for READ command according the flash datasheet which is
required for SDR mode.
Use FlexSPI internal divider for clock updating instead of register in
CCM to avoid potential risk caused by flash access during clock updating
procedure.
Signed-off-by: Raymond Lei <raymond.lei@nxp.com>
2 weeks ago
93e9016775
boards: nxp: Change default mac to unique for some
...
Change the default of the mac address for a few example boards
to use the "unique" option based on the chip unique ID,
instead of random. The RW was chosen because it has HWINFO implemented
currently. RT1050 was chosen as one of the RT boards.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
3 weeks ago
4a468e93cd
dts: treewide: fix missing use of underscores
...
in #83352 a few bindings were not migrated,
fix that, as it will lead to ci fails.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
3 weeks ago
e98cfa48e3
boards: nxp: add uhc support for mimxrt1050_evk
...
add uhc related items to dts.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
1 month ago
9fb4a78439
boards: nxp: make equal partition slots
...
- creates equal partition slots for NXP boards.
- allows support for all firmware update modes,
primarily for the new preferred "Swap using offset".
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
2 months ago
de13103f0b
boards: doc: adopt zephyr:board-supported-runners directive
...
Add .. zephyr:board-supported-runners:: to the Programming and Debugging
section of the documentation for each board that has one such section,
as this is the most natural place to put it.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
3 months ago
9abfc8301a
doc: nxp: adopt zephyr:board-supported-hw directive
...
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
3 months ago
7ed7cd191a
modules: hal_nxp: Move hal_nxp glue layer to zephyr repo
...
Move hal_nxp glue layer to zephyr repo.
Fix build warnings and failures caused by hal_nxp upgrade.
Update manifest to contain hal_nxp changes.
Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
4 months ago
3598c413ed
doc: boards: nxp: Add footer to board doc pages
...
Adds common footer to NXP boards.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
4 months ago
d46c382950
drivers: ethernet: Remove deprecated eth_mcux
...
This driver was deprecated and must be removed by Zephyr version
4.1 according to lifecycle/release guidelines.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
4 months ago
c9502360f8
boards: nxp: fix "configurationn" typo
...
s/configuration/configuration/
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
5 months ago
31a2b4f374
drivers: spi_nxp_lpspi: Add tristate output config
...
Add DT property to configure the LPSPI instance to use tristated output
instead of retained output when PCS is negated.
Turn on the config on a couple boards for test coverage.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
5 months ago
fe87abe0b9
boards: Remove 'xtools' toolchain variant references
...
This commit removes all references to the `xtools` toolchain variant in the
board YAML files.
Note that the `xtools` toolchain variant has been deprecated since Zephyr
v3.3.0 and now removed.
The removal process was automated using the following command line:
git grep -l xtools -- boards/*.{yml,yaml} | \
xargs -n 1 -P $(nproc) \
yq -i 'del(.toolchain[] | select(. == "xtools"))'
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
6 months ago
0cdb35d978
boards: mimxrt1050_evk: Switch to variants
...
Switch from using revisions for hyperflash/qspi to using variants, by
popular demand.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
7 months ago
b345d79fa8
boards: nxp: Add 'supported: flash'
...
- Adds 'supported: flash' to all NXP board .yaml
with enabled flash controller support.
- Sorts supported features alphabetically.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
7 months ago
a730d9abad
boards: nxp: fix s26ks512s0 flash write-block-size
...
- Sets s26ks512s0 flash write-block-size to correct 256KB.
- Optimizes MCUboot partitions to fit the correct write-block-size.
Fixes #80284
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
8 months ago
a1dc0b8b3e
drivers: disk: sdmmc_subsys: remove CONFIG_SDMMC_VOLUME_NAME
...
Remove CONFIG_SDMMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the sdmmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
sdmmc-subsys disk driver, and change all in tree usage of the disk name
Fixes #75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
8 months ago
d885957fe8
boards: nxp: adopt new zephyr:board directive and role
...
This updates the documentation of all the NXP boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
9 months ago
43b07894c3
boards: fix max frequency for IS25WP flash chips
...
IS25WP flash chips support 133MHz only when P[6:3] is programmed, which
will not occur during the SFDP probe sequence used in the FlexSPI nor
driver. With the default P[6:3] value, the best frequency supported for
read instruction 0xEB is 104MHz, so set this for all boards using this
flash chip with the FlexSPI nor driver.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
9 months ago
82a192c8a9
boards: nxp: Removing CONFIG_PINCTRL from the boards defconfig
...
The Drivers using Pinctrl should be turning Pinctrl on
this should not be the responsibility of the board. This
commit removes CONFIG_PINCTRL from the boards side for nxp boards.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
9 months ago
05d59f7207
boards: Set full_name for all boards
...
Full name was set based on the information available either in board
documentation or in Twister files.
Whenever applicable, vendor name was dropped from the full name so that
all boards have a consistent naming scheme.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
9 months ago
4511662fe5
boards: nxp: Add Serial Recovery button alias
...
Fixes MCUBoot Serial Recovery compilation error
"Serial recovery/USB DFU button must be declared
in device tree as 'mcuboot_button0'"
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
9 months ago
34f3786851
boards: nxp: fix mcuboot slots per automatic max sectors
...
Fixed mcuboot slots, needed after MCUBoot added the default
auto calculation max sectors (CONFIG_BOOT_MAX_IMG_SECTORS_AUTO).
Fixed a possible firmware update error.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
10 months ago
4278d0a8d6
boards: nxp: mimxrt1050: add LinkServer runner support for qspi board
...
override the default flash driver with MIMXRT1050_SFDP_QSPI.cfx to support
LinkServer runner for qspi board.
Signed-off-by: Paul He <pawpawhe@gmail.com>
10 months ago
9a16b93868
samples: hello_world: use zephyr:code-sample directive
...
Adds missing code-sample directive to the Hello World sample in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
10 months ago
7ff43f227c
boards: nxp: Add uart-mcumgr for nxp boards
...
Adds "chosen,uart-mcumgr" for nxp boards that support
the secondary bootloader partitioning.
Fixes the subsys\mgmt\mcumgr\smp_svr sample.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
10 months ago
e3151de7fa
boards: nxp: add test feature 'usbd'
...
Commit b6b43c3ed7
1 year ago
470dc3d53c
boards: nxp: mimxrt1050_evk: fix reference to A0 silicon on EVK
...
RT1050 EVK rev A boards (with rev A silicon) are not well supported by
Zephyr. Update the documentation page to remove the reference to A0
silicon, as the page describes details specific to the RT1050 EVKB with
rev B silicon.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
1 year ago
e3794fd0f2
boards: nxp: imxrt10xx: update debugging section to use common snippets
...
Update iMXRT10xx board debug sections to use common snippets, which
describe debug configuration settings shared between all these boards.
This should help avoid documentation falling out of date in the future.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
1 year ago
2061e60a78
boards: nxp: mimxrt1050: remove display, document usable shields
...
Remove display definition from MIMXRT1050 EVK, and document the shields
that can be used with the board's FPC 40+6 pin parallel display
interface.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
1 year ago
2e4e9a9494
dts: bindings: Fix KSZ8081 property names
...
Fix KSZ8081 binding properties:
- reset-gpios and interrupt-gpios are generally standard
properties and therefore should not be using a special name
- mc, is not the correct vendor prefix for microchip
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
1 year ago
03d1eabc32
boards: nxp: mimxrt10xx: fix non-optimal sector distribution
...
- Optimize slot sizes for MCUBoot swap move algorithm
for mimxrt1010/15/20/24/40/50/60/64 boards.
- Save up to 64 wasted sectors.
- Use DT_SIZE_K/M macros for slot sizes.
- Fix partition size errors.
- Limit mcuboot max size to 128KB (was 256KB).
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
1 year ago
9b2ae5d02b
boards: nxp: mimxrt1050: enable PXP and apply optimized LVGL settings
...
Enable PXP on RT1050 EVK, and apply LVGL settings optimized for PXP
support. These settings will enable PXP rotation to function as expected
when using LVGL with the RT1050.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
1 year ago
21e111c469
boards: mimxrt1050_evk: doc: add SWD related jumpers for rev B1
...
Add jumpers used for SWD on rev B1 boards.
Signed-off-by: Benjamin Lemouzy <blemouzy@centralp.fr>
1 year ago
537d5c310c
dts: nxp: Convert ENET DT default to new binding.
...
Convert all of the NXP SOCs with ENET to use the new
binding scheme, which is used by the new driver.
Convert any boards using this SOC to the new scheme as well,
and remove from the documentation the bit about the experimental
nature of the new driver and the overlay that shall no longer exist.
Some of the boards I do not have the hardware of, so apologies
if something breaks, as I have no way to know. All the boards
were made sure to at least build.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
1 year ago
ac58f3abe6
drivers: nxp_enet: Generate MAC using eth.h
...
The MAC address macros are ridiculous in this driver.
Rewrite to be simpler and use eth.h common function.
Also, clarify the mac address generation on the DT overlays.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
1 year ago
df50197499
boards: Fix invalid paths
...
Fixes paths that are not valid
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
1 year ago
e6990302cb
doc: hwmv2: boards: fix broken NXP links
...
fix bad links to some NXP board files (and make references actual "links")
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
1 year ago
8dc3f85622
hwmv2: Introduce Hardware model version 2 and convert devices
...
This is a squash of the ``collab-hwm`` branch which converts all
in-tree boards to hardware model version 2 including build system
changes, board updates and soc conversions.
This squash is a combination of the following commits:
ca214745a1 soc: Remove soc_legacy folder and move ARM Kconfig
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
1 year ago
Andrej Butok
Raymond Lei
Declan Snyder
Fin Maaß
Mark Wang
Benjamin Cabé
Zhaoxiang Jin
Derek Snell
Stephanos Ioannidis
Daniel DeGrasse
Emilio Benavente
Paul He
Johann Fischer
Benjamin Lemouzy
Jamie McCrae
Torsten Rasmussen