boards: arm: efr32_radio: Convert to v2

Converts the board to hwmv2

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>

boards/boards_legacy/arm/efr32_radio/Kconfig

@@ -1,7 +0,0 @@
-# EFR32 radio board configuration
-
-# Copyright (c) 2020 Piotr Mienkowski
-# SPDX-License-Identifier: Apache-2.0
-
-config BOARD_EFR32_RADIO
-	bool

boards/boards_legacy/arm/efr32_radio/Kconfig.board

@@ -1,48 +0,0 @@
-# EFR32BG13 BRD4104A / EFR32MG21 BRD4180A /
-# EFR32FG1P BRD4250B / EFR32FG13P BRD4255A board
-
-# Copyright (c) 2020 Piotr Mienkowski
-# Copyright (c) 2020 TriaGnoSys GmbH
-# SPDX-License-Identifier: Apache-2.0
-
-config BOARD_EFR32_RADIO_BRD4104A
-	bool "Silicon Labs BRD4104A (Blue Gecko Radio Board)"
-	depends on SOC_SERIES_EFR32BG13P
-	select BOARD_EFR32_RADIO
-	select SOC_PART_NUMBER_EFR32BG13P632F512GM48
-
-config BOARD_EFR32_RADIO_BRD4170A
-	bool "Silicon Labs BRD4170A (Mighty Gecko Radio Board)"
-	depends on SOC_SERIES_EFR32MG12P
-	select BOARD_EFR32_RADIO
-	select SOC_PART_NUMBER_EFR32MG12P433F1024GM68
-
-config BOARD_EFR32_RADIO_BRD4161A
-	bool "Silicon Labs BRD4161A (Mighty Gecko Radio Board)"
-	depends on SOC_SERIES_EFR32MG12P
-	select BOARD_EFR32_RADIO
-	select SOC_PART_NUMBER_EFR32MG12P432F1024GL125
-
-config BOARD_EFR32_RADIO_BRD4250B
-	bool "Silicon Labs BRD4250B (Flex Gecko Radio Board)"
-	depends on SOC_SERIES_EFR32FG1P
-	select BOARD_EFR32_RADIO
-	select SOC_PART_NUMBER_EFR32FG1P133F256GM48
-
-config BOARD_EFR32_RADIO_BRD4180A
-	bool "Silicon Labs BRD4180A (Mighty Gecko Radio Board)"
-	depends on SOC_SERIES_EFR32MG21
-	select BOARD_EFR32_RADIO
-	select SOC_PART_NUMBER_EFR32MG21A020F1024IM32
-
-config BOARD_EFR32_RADIO_BRD4187C
-	bool "Silicon Labs BRD4187C (Mighty Gecko Radio Board)"
-	depends on SOC_SERIES_EFR32MG24
-	select BOARD_EFR32_RADIO
-	select SOC_PART_NUMBER_EFR32MG24B220F1536IM48
-
-config BOARD_EFR32_RADIO_BRD4255A
-	bool "Silicon Labs BRD4255A (Flex Gecko Radio Board)"
-	depends on SOC_SERIES_EFR32FG13P
-	select BOARD_EFR32_RADIO
-	select SOC_PART_NUMBER_EFR32FG13P233F512GM48

boards/boards_legacy/arm/efr32_radio/board.cmake

@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-
-board_runner_args(openocd)
-
-if(CONFIG_BOARD_EFR32_RADIO_BRD4104A)
-board_runner_args(jlink "--device=EFR32BG13PxxxF512")
-elseif(CONFIG_BOARD_EFR32_RADIO_BRD4250B)
-board_runner_args(jlink "--device=EFR32FG1PxxxF256")
-elseif(CONFIG_BOARD_EFR32_RADIO_BRD4170A)
-board_runner_args(jlink "--device=EFR32MG12PxxxF1024")
-elseif(CONFIG_BOARD_EFR32_RADIO_BRD4161A)
-board_runner_args(jlink "--device=EFR32MG12PxxxF1024")
-elseif(CONFIG_BOARD_EFR32_RADIO_BRD4180A)
-board_runner_args(jlink "--device=EFR32MG21AxxxF1024")
-elseif(CONFIG_BOARD_EFR32_RADIO_BRD4187C)
-board_runner_args(jlink "--device=EFR32MG24BxxxF1536")
-elseif(CONFIG_BOARD_EFR32_RADIO_BRD4255A)
-board_runner_args(jlink "--device=EFR32FG13PxxxF512")
-endif()
-
-include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
-include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)

boards/boards_legacy/arm/efr32_radio/efr32_radio_brd4255a_defconfig

@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-
-CONFIG_SOC_SERIES_EFR32FG13P=y
-CONFIG_BOARD_EFR32_RADIO_BRD4255A=y
-CONFIG_ARM_MPU=y
-CONFIG_CONSOLE=y
-CONFIG_UART_CONSOLE=y
-CONFIG_SERIAL=y
-CONFIG_GPIO=y
-CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=38400000
-CONFIG_CMU_HFCLK_HFXO=y
-CONFIG_SOC_GECKO_EMU_DCDC=y
-CONFIG_SOC_GECKO_EMU_DCDC_MODE_ON=y

boards/silabs/efr32_radio/Kconfig.defconfig

@@ -6,17 +6,8 @@
 
 if BOARD_EFR32_RADIO
 
-config BOARD
-	default "efr32_radio_brd4104a" if BOARD_EFR32_RADIO_BRD4104A
-	default "efr32_radio_brd4170a" if BOARD_EFR32_RADIO_BRD4170A
-	default "efr32_radio_brd4161a" if BOARD_EFR32_RADIO_BRD4161A
-	default "efr32_radio_brd4250b" if BOARD_EFR32_RADIO_BRD4250B
-	default "efr32_radio_brd4180a" if BOARD_EFR32_RADIO_BRD4180A
-	default "efr32_radio_brd4187c" if BOARD_EFR32_RADIO_BRD4187C
-	default "efr32_radio_brd4255a" if BOARD_EFR32_RADIO_BRD4255A
-
 config CMU_HFXO_FREQ
-	default 39000000 if BOARD_EFR32_RADIO_BRD4187C
+	default 39000000 if BOARD_EFR32_RADIO_EFR32MG24B220F1536IM48
 	default 38400000
 
 config CMU_LFXO_FREQ
@@ -24,7 +15,7 @@ config CMU_LFXO_FREQ
 
 config FLASH_BASE_ADDRESS
 	hex
-	default 0x08000000 if BOARD_EFR32_RADIO_BRD4187C
+	default 0x08000000 if BOARD_EFR32_RADIO_EFR32MG24B220F1536IM48
 	default 0x0
 
 config LOG_BACKEND_SWO_FREQ_HZ

boards/silabs/efr32_radio/Kconfig.efr32_radio

@@ -0,0 +1,15 @@
+# EFR32BG13 BRD4104A / EFR32MG21 BRD4180A /
+# EFR32FG1P BRD4250B / EFR32FG13P BRD4255A board
+
+# Copyright (c) 2020 Piotr Mienkowski
+# Copyright (c) 2020 TriaGnoSys GmbH
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_EFR32_RADIO
+	select SOC_PART_NUMBER_EFR32BG13P632F512GM48 if BOARD_EFR32_RADIO_EFR32BG13P632F512GM48
+	select SOC_PART_NUMBER_EFR32MG12P433F1024GM68 if BOARD_EFR32_RADIO_EFR32MG12P433F1024GM68
+	select SOC_PART_NUMBER_EFR32MG12P432F1024GL125 if BOARD_EFR32_RADIO_EFR32MG12P432F1024GL125
+	select SOC_PART_NUMBER_EFR32FG1P133F256GM48 if BOARD_EFR32_RADIO_EFR32FG1P133F256GM48
+	select SOC_PART_NUMBER_EFR32MG21A020F1024IM32 if BOARD_EFR32_RADIO_EFR32MG21A020F1024IM32
+	select SOC_PART_NUMBER_EFR32MG24B220F1536IM48 if BOARD_EFR32_RADIO_EFR32MG24B220F1536IM48
+	select SOC_PART_NUMBER_EFR32FG13P233F512GM48 if BOARD_EFR32_RADIO_EFR32FG13P233F512GM48

boards/silabs/efr32_radio/board.cmake

@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: Apache-2.0
+
+board_runner_args(openocd)
+
+if(CONFIG_BOARD_EFR32_RADIO_EFR32BG13P632F512GM48)
+  board_runner_args(jlink "--device=EFR32BG13PxxxF512")
+elseif(CONFIG_BOARD_EFR32_RADIO_EFR32FG1P133F256GM48)
+  board_runner_args(jlink "--device=EFR32FG1PxxxF256")
+elseif(CONFIG_BOARD_EFR32_RADIO_EFR32MG12P433F1024GM68)
+  board_runner_args(jlink "--device=EFR32MG12PxxxF1024")
+elseif(CONFIG_BOARD_EFR32_RADIO_EFR32MG12P432F1024GL125)
+  board_runner_args(jlink "--device=EFR32MG12PxxxF1024")
+elseif(CONFIG_BOARD_EFR32_RADIO_EFR32MG21A020F1024IM32)
+  board_runner_args(jlink "--device=EFR32MG21AxxxF1024")
+elseif(CONFIG_BOARD_EFR32_RADIO_EFR32MG24B220F1536IM48)
+  board_runner_args(jlink "--device=EFR32MG24BxxxF1536")
+elseif(CONFIG_BOARD_EFR32_RADIO_EFR32FG13P233F512GM48)
+  board_runner_args(jlink "--device=EFR32FG13PxxxF512")
+endif()
+
+include(${ZEPHYR_BASE}/boards/common/openocd.board.cmake)
+include(${ZEPHYR_BASE}/boards/common/jlink.board.cmake)

boards/silabs/efr32_radio/board.yml

@@ -0,0 +1,10 @@
+boards:
+  - name: efr32_radio
+    socs:
+      - name: efr32bg13p632f512gm48
+      - name: efr32mg12p433f1024gm68
+      - name: efr32mg12p432f1024gl125
+      - name: efr32fg1p133f256gm48
+      - name: efr32mg21a020f1024im32
+      - name: efr32mg24b220f1536im48
+      - name: efr32fg13p233f512gm48

boards/silabs/efr32_radio/doc/brd4104a.rst

@@ -49,11 +49,10 @@ Supported Features
 Please refer to
 :ref:`EFR32 Radio Board Supported Features <efr32_radio_supported_features>`
 for details of the configuration and common features supported by the
-efr32_radio_brd4104a board.
+``efr32_radio/efr32bg13p632f512gm48`` board.
 
-The default configuration can be found in the defconfig file:
-
-	``boards/arm/efr32_radio/efr32_radio_brd4104a_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/silabs/efr32_radio/efr32_radio_efr32bg13p632f512gm48_defconfig`
 
 System Clock
 ============
@@ -84,7 +83,7 @@ Here is an example for the :ref:`hello_world` application.
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
-   :board: efr32_radio_brd4104a
+   :board: efr32_radio/efr32bg13p632f512gm48
    :goals: flash
 
 Open a serial terminal (minicom, putty, etc.) with the following settings:
@@ -98,7 +97,7 @@ Reset the board and you should see the following message in the terminal:
 
 .. code-block:: console
 
-   Hello World! efr32_radio_brd4104a
+   Hello World! efr32_radio
 
 
 .. _EFR32BG13 Website:

boards/silabs/efr32_radio/doc/brd4161a.rst

@@ -44,11 +44,10 @@ Supported Features
 Please refer to
 :ref:`EFR32 Radio Board Supported Features <efr32_radio_supported_features>`
 for details of the configuration and common features supported by the
-efr32_radio_brd4161a board.
+``efr32_radio/efr32mg12p432f1024gl125`` board.
 
-The default configuration can be found in the defconfig file:
-
-	``boards/arm/efr32_radio/efr32_radio_brd4161a_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/silabs/efr32_radio/efr32_radio_efr32mg12p432f1024gl125_defconfig`
 
 System Clock
 ============
@@ -79,7 +78,7 @@ Here is an example for the :ref:`hello_world` application.
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
-   :board: efr32_radio_brd4161a
+   :board: efr32_radio/efr32mg12p432f1024gl125
    :goals: flash
 
 Open a serial terminal (minicom, putty, etc.) with the following settings:
@@ -93,7 +92,7 @@ Reset the board and you should see the following message in the terminal:
 
 .. code-block:: console
 
-   Hello World! efr32_radio_brd4161a
+   Hello World! efr32_radio
 
 
 .. _EFR32MG12 Website:

boards/silabs/efr32_radio/doc/brd4170a.rst

@@ -44,11 +44,10 @@ Supported Features
 Please refer to
 :ref:`EFR32 Radio Board Supported Features <efr32_radio_supported_features>`
 for details of the configuration and common features supported by the
-efr32_radio_brd4170a board.
+``efr32_radio/efr32mg12p433f1024gm68`` board.
 
-The default configuration can be found in the defconfig file:
-
-	``boards/arm/efr32_radio/efr32_radio_brd4170a_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/silabs/efr32_radio/efr32_radio_efr32mg12p433f1024gm68_defconfig`
 
 System Clock
 ============
@@ -79,7 +78,7 @@ Here is an example for the :ref:`hello_world` application.
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
-   :board: efr32_radio_brd4170a
+   :board: efr32_radio/efr32mg12p433f1024gm68
    :goals: flash
 
 Open a serial terminal (minicom, putty, etc.) with the following settings:
@@ -93,7 +92,7 @@ Reset the board and you should see the following message in the terminal:
 
 .. code-block:: console
 
-   Hello World! efr32_radio_brd4170a
+   Hello World! efr32_radio
 
 
 .. _EFR32MG12 Website:

boards/silabs/efr32_radio/doc/brd4180a.rst

@@ -95,9 +95,8 @@ means Pin number 2 on PORTA, as used in the board's datasheets and manuals.
 | PA6   | USART1_RX   | UART Console EFM_BC_RX US1_RX       |
 +-------+-------------+-------------------------------------+
 
-The default configuration can be found in the defconfig file:
-
-	``boards/arm/efr32_radio/efr32_radio_brd4180a_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/silabs/efr32_radio/efr32_radio_efr32mg21a020f1024im32_defconfig`
 
 System Clock
 ============
@@ -128,7 +127,7 @@ Here is an example for the :ref:`hello_world` application.
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
-   :board: efr32_radio_brd4180a
+   :board: efr32_radio/efr32mg21a020f1024im32
    :goals: flash
 
 Open a serial terminal (minicom, putty, etc.) with the following settings:
@@ -142,7 +141,7 @@ Reset the board and you should see the following message in the terminal:
 
 .. code-block:: console
 
-   Hello World! efr32_radio_brd4180a
+   Hello World! efr32_radio
 
 
 .. _EFR32-SLWSTK6006A Website:

boards/silabs/efr32_radio/doc/brd4187c.rst

@@ -96,9 +96,8 @@ means Pin number 2 on PORTA, as used in the board's datasheets and manuals.
 | PA9   | USART0_RX   | UART Console VCOM_RX US0_RX         |
 +-------+-------------+-------------------------------------+
 
-The default configuration can be found in the defconfig file:
-
-	``boards/arm/efr32_radio/efr32_radio_brd4187c_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/silabs/efr32_radio/efr32_radio_efr32mg24b220f1536im48_defconfig``
 
 System Clock
 ============
@@ -129,7 +128,7 @@ Here is an example for the :ref:`hello_world` application.
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
-   :board: efr32_radio_brd4187c
+   :board: efr32_radio/efr32mg24b220f1536im48
    :goals: flash
 
 Open a serial terminal (minicom, putty, etc.) with the following settings:
@@ -143,7 +142,7 @@ Reset the board and you should see the following message in the terminal:
 
 .. code-block:: console
 
-   Hello World! efr32_radio_brd4187c
+   Hello World! efr32_radio
 
 
 .. _xG24-PK6010A Website:

boards/silabs/efr32_radio/doc/brd4250b.rst

@@ -48,11 +48,10 @@ Supported Features
 Please refer to
 :ref:`EFR32 Radio Board Supported Features <efr32_radio_supported_features>`
 for details of the configuration and common features supported by the
-efr32_radio_brd4250b board.
+``efr32_radio/efr32fg1p133f256gm48`` board.
 
-The default configuration can be found in the defconfig file:
-
-	``boards/arm/efr32_radio/efr32_radio_brd4250b_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/silabs/efr32_radio/efr32_radio_efr32fg1p133f256gm48_defconfig`
 
 System Clock
 ============
@@ -83,7 +82,7 @@ Here is an example for the :ref:`hello_world` application.
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
-   :board: efr32_radio_brd4250b
+   :board: efr32_radio/efr32fg1p133f256gm48
    :goals: flash
 
 Open a serial terminal (minicom, putty, etc.) with the following settings:
@@ -97,7 +96,7 @@ Reset the board and you should see the following message in the terminal:
 
 .. code-block:: console
 
-   Hello World! efr32_radio_brd4250b
+   Hello World! efr32_radio
 
 
 .. _EFR32FG1 Website:

boards/silabs/efr32_radio/doc/brd4255a.rst

@@ -44,11 +44,10 @@ Supported Features
 Please refer to
 :ref:`EFR32 Radio Board Supported Features <efr32_radio_supported_features>`
 for details of the configuration and common features supported by the
-efr32_radio_brd4255a board.
+``efr32_radio/efr32fg13p233f512gm48`` board.
 
-The default configuration can be found in the defconfig file:
-
-	``boards/arm/efr32_radio/efr32_radio_brd4255a_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/silabs/efr32_radio/efr32_radio_efr32fg13p233f512gm48_defconfig`
 
 System Clock
 ============
@@ -79,7 +78,7 @@ Here is an example for the :ref:`hello_world` application.
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
-   :board: efr32_radio_brd4255a
+   :board: efr32_radio/efr32fg13p233f512gm48
    :goals: flash
 
 Open a serial terminal (minicom, putty, etc.) with the following settings:
@@ -93,7 +92,7 @@ Reset the board and you should see the following message in the terminal:
 
 .. code-block:: console
 
-   Hello World! efr32_radio_brd4255a
+   Hello World! efr32_radio
 
 
 .. _EFR32FG13 Website:

boards/silabs/efr32_radio/efr32_radio_efr32bg13p632f512gm48.yaml

@@ -1,4 +1,4 @@
-identifier: efr32_radio_brd4104a
+identifier: efr32_radio/efr32bg13p632f512gm48
 name: BRD4104A
 type: mcu
 arch: arm

boards/silabs/efr32_radio/efr32_radio_efr32bg13p632f512gm48_defconfig

@@ -1,7 +1,5 @@
 # SPDX-License-Identifier: Apache-2.0
 
-CONFIG_SOC_SERIES_EFR32FG1P=y
-CONFIG_BOARD_EFR32_RADIO_BRD4250B=y
 CONFIG_ARM_MPU=y
 CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y

boards/silabs/efr32_radio/efr32_radio_efr32fg13p233f512gm48.yaml

@@ -1,4 +1,4 @@
-identifier: efr32_radio_brd4255a
+identifier: efr32_radio/efr32fg13p233f512gm48
 name: BRD4255A
 type: mcu
 arch: arm

boards/silabs/efr32_radio/efr32_radio_efr32fg13p233f512gm48_defconfig

@@ -1,8 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
 
 CONFIG_ARM_MPU=y
-CONFIG_SOC_SERIES_EFR32MG12P=y
-CONFIG_BOARD_EFR32_RADIO_BRD4170A=y
 CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y

boards/silabs/efr32_radio/efr32_radio_efr32fg1p133f256gm48.yaml

@@ -1,4 +1,4 @@
-identifier: efr32_radio_brd4250b
+identifier: efr32_radio/efr32fg1p133f256gm48
 name: BRD4250B
 type: mcu
 arch: arm

boards/silabs/efr32_radio/efr32_radio_efr32fg1p133f256gm48_defconfig

@@ -1,8 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
 
 CONFIG_ARM_MPU=y
-CONFIG_SOC_SERIES_EFR32BG13P=y
-CONFIG_BOARD_EFR32_RADIO_BRD4104A=y
 CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y

boards/silabs/efr32_radio/efr32_radio_efr32mg12p432f1024gl125.yaml

@@ -1,4 +1,4 @@
-identifier: efr32_radio_brd4161a
+identifier: efr32_radio/efr32mg12p432f1024gl125
 name: BRD4161A
 type: mcu
 arch: arm

boards/silabs/efr32_radio/efr32_radio_efr32mg12p432f1024gl125_defconfig

@@ -1,8 +1,6 @@
 # SPDX-License-Identifier: Apache-2.0
 
 CONFIG_ARM_MPU=y
-CONFIG_SOC_SERIES_EFR32MG12P=y
-CONFIG_BOARD_EFR32_RADIO_BRD4161A=y
 CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y

boards/silabs/efr32_radio/efr32_radio_efr32mg12p433f1024gm68.yaml

@@ -1,4 +1,4 @@
-identifier: efr32_radio_brd4170a
+identifier: efr32_radio/efr32mg12p433f1024gm68
 name: BRD4170A
 type: mcu
 arch: arm

boards/silabs/efr32_radio/efr32_radio_efr32mg12p433f1024gm68_defconfig

@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: Apache-2.0
+
+CONFIG_ARM_MPU=y
+CONFIG_CONSOLE=y
+CONFIG_UART_CONSOLE=y
+CONFIG_SERIAL=y
+CONFIG_GPIO=y
+CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=38400000
+CONFIG_CMU_HFCLK_HFXO=y
+CONFIG_SOC_GECKO_EMU_DCDC=y
+CONFIG_SOC_GECKO_EMU_DCDC_MODE_ON=y

boards/silabs/efr32_radio/efr32_radio_efr32mg21a020f1024im32.dts

@@ -7,7 +7,7 @@
 /dts-v1/;
 #include <silabs/efr32mg21a020f1024im32.dtsi>
 #include <zephyr/dt-bindings/input/input-event-codes.h>
-#include "efr32_radio_brd4180a-pinctrl.dtsi"
+#include "efr32_radio_efr32mg21a020f1024im32-pinctrl.dtsi"
 
 / {
 	model = "Silicon Labs BRD4180A (Mighty Gecko Radio Board)";

boards/silabs/efr32_radio/efr32_radio_efr32mg21a020f1024im32.yaml

@@ -1,4 +1,4 @@
-identifier: efr32_radio_brd4180a
+identifier: efr32_radio/efr32mg21a020f1024im32
 name: BRD4180A
 type: mcu
 arch: arm

boards/silabs/efr32_radio/efr32_radio_efr32mg21a020f1024im32_defconfig

@@ -1,7 +1,5 @@
 # SPDX-License-Identifier: Apache-2.0
 
-CONFIG_SOC_SERIES_EFR32MG21=y
-CONFIG_BOARD_EFR32_RADIO_BRD4180A=y
 CONFIG_ARM_MPU=y
 CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y

boards/silabs/efr32_radio/efr32_radio_efr32mg24b220f1536im48.dts

@@ -7,7 +7,7 @@
 /dts-v1/;
 #include <silabs/efr32mg24b220f1536im48.dtsi>
 #include <zephyr/dt-bindings/input/input-event-codes.h>
-#include "efr32_radio_brd4187c-pinctrl.dtsi"
+#include "efr32_radio_efr32mg24b220f1536im48-pinctrl.dtsi"
 
 / {
 	model = "Silicon Labs BRD4187C (Mighty Gecko Radio Board)";

boards/silabs/efr32_radio/efr32_radio_efr32mg24b220f1536im48.yaml

@@ -1,4 +1,4 @@
-identifier: efr32_radio_brd4187c
+identifier: efr32_radio/efr32mg24b220f1536im48
 name: BRD4187C
 type: mcu
 arch: arm

boards/silabs/efr32_radio/efr32_radio_efr32mg24b220f1536im48_defconfig

@@ -1,7 +1,5 @@
 # SPDX-License-Identifier: Apache-2.0
 
-CONFIG_SOC_SERIES_EFR32MG24=y
-CONFIG_BOARD_EFR32_RADIO_BRD4187C=y
 CONFIG_ARM_MPU=y
 CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y