boards: Fix file paths in documentation

Fixes file paths which have not been updated since converting boards to hwmv2 Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
1 year ago · 48637066d3
73 changed files with 162 additions and 195 deletions
--- a/boards/96boards/96b_argonkey/doc/index.rst
+++ b/boards/96boards/96b_argonkey/doc/index.rst
@ -77,9 +77,8 @@ features:
				@@ -77,9 +77,8 @@ features:
 More information about the board can be found at the
 `ARGONKEY website`_.

-The default board configuration can be found in the defconfig file:
-
-        ``boards/arm/96b_argonkey/96b_argonkey_defconfig``
+The default board configuration can be found in
+:zephyr_file:`boards/96boards/96b_argonkey/96b_argonkey_defconfig`

 Connections and IOs
 ===================
--- a/boards/96boards/96b_avenger96/doc/index.rst
+++ b/boards/96boards/96b_avenger96/doc/index.rst
@ -163,8 +163,8 @@ features:
				@@ -163,8 +163,8 @@ features:
 | PINMUX    | on-chip    | pinmux                              |
 +-----------+------------+-------------------------------------+

-The default configuration can be found in the defconfig file:
-``boards/arm/96b_avenger96/96b_avenger96_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/96boards/96b_avenger96/96b_avenger96_defconfig`


 Connections and IOs
--- a/boards/96boards/96b_neonkey/doc/index.rst
+++ b/boards/96boards/96b_neonkey/doc/index.rst
@ -74,9 +74,8 @@ features:
				@@ -74,9 +74,8 @@ features:

 More details about the board can be found at `96Boards website`_.

-The default board configuration can be found in the defconfig file:
-
-        ``boards/arm/96b_neonkey/96b_neonkey_defconfig``
+The default board configuration can be found in
+:zephyr_file:`boards/96boards/96b_neonkey/96b_neonkey_defconfig`

 Connections and IOs
 ===================
--- a/boards/96boards/96b_stm32_sensor_mez/doc/index.rst
+++ b/boards/96boards/96b_stm32_sensor_mez/doc/index.rst
@ -73,9 +73,8 @@ hardware features:
				@@ -73,9 +73,8 @@ hardware features:
 | I2S       | on-chip    | i2s                                 |
 +-----------+------------+-------------------------------------+

-The default board configuration can be found in the defconfig file:
-
-        ``boards/arm/96b_stm32_sensor_mez/96b_stm32_sensor_mez_defconfig``
+The default board configuration can be found in
+:zephyr_file:`boards/96boards/96b_stm32_sensor_mez/96b_stm32_sensor_mez_defconfig`

 Connections and IOs
 ===================
--- a/boards/96boards/96b_wistrio/doc/96b_wistrio.rst
+++ b/boards/96boards/96b_wistrio/doc/96b_wistrio.rst
@ -70,9 +70,8 @@ features:
				@@ -70,9 +70,8 @@ features:
 | EEPROM    | on-chip    | eeprom                              |
 +-----------+------------+-------------------------------------+

-The default board configuration can be found in the defconfig file:
-
-        ``boards/arm/96b_wistrio/96b_wistrio_defconfig``
+The default board configuration can be found in
+:zephyr_file:`boards/96boards/96b_wistrio/96b_wistrio_defconfig`

 Connections and IOs
 ===================
--- a/boards/adi/adi_sdp_k1/doc/index.rst
+++ b/boards/adi/adi_sdp_k1/doc/index.rst
@ -89,9 +89,8 @@ The Zephyr stm32f469i_disco board configuration supports the following hardware
				@@ -89,9 +89,8 @@ The Zephyr stm32f469i_disco board configuration supports the following hardware

 Other hardware features are not yet supported on Zephyr porting.

-The default configuration can be found in the defconfig file:
-
-    ``boards/arm/adi_sdp_k1/adi_sdp_k1_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/adi/adi_sdp_k1/adi_sdp_k1_defconfig`

 Pin Mapping
 ===========
--- a/boards/arm/mps3/doc/index.rst
+++ b/boards/arm/mps3/doc/index.rst
@ -44,9 +44,9 @@ The BOARD options are summarized below:
				@@ -44,9 +44,9 @@ The BOARD options are summarized below:
 +----------------------+-----------------------------------------------+
 |   BOARD              | Description                                   |
 +======================+===============================================+
-| mps3_an547           | For building Secure (or Secure-only) firmware |
+| ``mps3/an547``       | For building Secure (or Secure-only) firmware |
 +----------------------+-----------------------------------------------+
-| mps3_an547_ns        | For building Non-Secure firmware              |
+| ``mps3/an547/ns``    | For building Non-Secure firmware              |
 +----------------------+-----------------------------------------------+

 Hardware
@ -89,7 +89,7 @@ ARM MPS3 AN547 provides the following hardware components:
				@@ -89,7 +89,7 @@ ARM MPS3 AN547 provides the following hardware components:
 Supported Features
 ===================

-The mps3_an547 board configuration supports the following hardware features:
+The ``mps3/an547`` board configuration supports the following hardware features:

 +-----------+------------+-------------------------------------+
 | Interface | Controller | Driver/Component                    |
@ -108,8 +108,8 @@ Other hardware features are not currently supported by the port.
				@@ -108,8 +108,8 @@ Other hardware features are not currently supported by the port.
 See the `MPS3 FPGA Website`_ for a complete list of MPS3 AN547 board hardware
 features.

-The default configuration can be found in the defconfig file:
-``boards/arm/mps3_an547/mps3_an547_defconfig``.
+The default configuration can be found in
+:zephyr_file:`boards/arm/mps3/mps3_an547_defconfig`.

 For more details refer to `MPS3 AN547 Technical Reference Manual (TRM)`_.

@ -146,7 +146,7 @@ the :ref:`hello_world` application.
				@@ -146,7 +146,7 @@ the :ref:`hello_world` application.

 .. zephyr-app-commands::
   :zephyr-app: samples/hello_world
-   :board: mps3_an547
+   :board: mps3/an547
   :goals: build

 Open a serial terminal (minicom, putty, etc.) with the following settings:
@ -161,7 +161,7 @@ serial port:
				@@ -161,7 +161,7 @@ serial port:

 .. code-block:: console

-   Hello World! mps3_an547
+   Hello World! mps3

 Uploading an application to MPS3 AN547
 ---------------------------------------
@ -197,7 +197,7 @@ serial port:
				@@ -197,7 +197,7 @@ serial port:

 .. code-block:: console

-   Hello World! mps3_an547
+   Hello World! mps3


 FVP Usage
--- a/boards/aspeed/ast1030_evb/doc/index.rst
+++ b/boards/aspeed/ast1030_evb/doc/index.rst
@ -46,8 +46,8 @@ The following features are supported:
				@@ -46,8 +46,8 @@ The following features are supported:

 Other hardware features are not currently supported by Zephyr (at the moment)

-The default configuration can be found in the defconfig file:
-``boards/arm/ast1030_evb/ast1030_evb_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/aspeed/ast1030_evb/ast1030_evb_defconfig`


 Connections and IOs
--- a/boards/broadcom/bcm958401m2/doc/index.rst
+++ b/boards/broadcom/bcm958401m2/doc/index.rst
@ -31,9 +31,8 @@ features:
				@@ -31,9 +31,8 @@ features:

 Other hardware features have not been enabled yet for this board.

-The default configuration can be found in the defconfig file:
-
-        ``boards/arm/bcm958401m2/bcm958401m2_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/broadcom/bcm958401m2/bcm958401m2_defconfig`

 Connections and IOs
 ===================
--- a/boards/broadcom/bcm958402m2/doc/a72.rst
+++ b/boards/broadcom/bcm958402m2/doc/a72.rst
@ -5,12 +5,12 @@ Broadcom BCM958402M2 (Cortex-A72)
				@@ -5,12 +5,12 @@ Broadcom BCM958402M2 (Cortex-A72)

 Overview
 ********
-The Broadcom bcm958402m2_a72 board utilizes the Viper BCM58402_A72 SoC
+The Broadcom ``bcm958402m2/bcm58402/a72`` board utilizes the Viper BCM58402_A72 SoC
 to provide support for PCIe offload engine functionality.

 Hardware
 ********
-The bcm958402m2_a72 is a PCIe card with the following physical features:
+The ``bcm958402m2/bcm58402/a72`` is a PCIe card with the following physical features:

 * PCIe Gen4 interface
 * RS232 UART (optionally populated)
@ -18,7 +18,7 @@ The bcm958402m2_a72 is a PCIe card with the following physical features:
				@@ -18,7 +18,7 @@ The bcm958402m2_a72 is a PCIe card with the following physical features:

 Supported Features
 ==================
-The Broadcom bcm958402m2_a72 board configuration supports the following
+The Broadcom ``bcm958402m2/bcm58402/a72`` board configuration supports the following
 hardware features:

 +-----------+------------+--------------------------------------+
@ -31,9 +31,8 @@ hardware features:
				@@ -31,9 +31,8 @@ hardware features:

 Other hardware features have not been enabled yet for this board.

-The default configuration can be found in the defconfig file:
-
-        ``boards/arm/bcm958402m2_a72/bcm958402m2_a72_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/broadcom/bcm958402m2/bcm958402m2_bcm58402_a72_defconfig`

 Programming and Debugging
 *************************
@ -46,6 +45,6 @@ Board is booted over PCIe interface.
				@@ -46,6 +45,6 @@ Board is booted over PCIe interface.

 Debugging
 =========
-The bcm958402m2_a72 board includes pads for soldering a JTAG connector.
+The ``bcm958402m2/bcm58402/a72`` board includes pads for soldering a JTAG connector.
 Zephyr applications running on the Cortex-A72 core can also be tested
 by observing UART console output.
--- a/boards/broadcom/bcm958402m2/doc/m7.rst
+++ b/boards/broadcom/bcm958402m2/doc/m7.rst
@ -5,12 +5,12 @@ Broadcom BCM958402M2 (Cortex-M7)
				@@ -5,12 +5,12 @@ Broadcom BCM958402M2 (Cortex-M7)

 Overview
 ********
-The Broadcom bcm958402m2_m7 board utilizes the Viper BCM58402_M7 SoC to
+The Broadcom ``bcm958402m2/bcm58402/m7`` board utilizes the Viper BCM58402_M7 SoC to
 provide support for PCIe offload engine functionality.

 Hardware
 ********
-The bcm958402m2_m7 is a PCIe card with the following physical features:
+The ``bcm958402m2/bcm58402/m7`` is a PCIe card with the following physical features:

 * PCIe Gen4 interface
 * RS232 UART (optionally populated)
@ -18,7 +18,7 @@ The bcm958402m2_m7 is a PCIe card with the following physical features:
				@@ -18,7 +18,7 @@ The bcm958402m2_m7 is a PCIe card with the following physical features:

 Supported Features
 ==================
-The Broadcom bcm958402m2_m7 board configuration supports the following
+The Broadcom ``bcm958402m2/bcm58402/m7`` board configuration supports the following
 hardware features:

 +-----------+------------+--------------------------------------+
@ -31,9 +31,8 @@ hardware features:
				@@ -31,9 +31,8 @@ hardware features:

 Other hardware features have not been enabled yet for this board.

-The default configuration can be found in the defconfig file:
-
-        ``boards/arm/bcm958402m2_m7/bcm958402m2_m7_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/broadcom/bcm958402m2/bcm958402m2_bcm58402_m7_defconfig`

 Programming and Debugging
 *************************
@ -46,6 +45,6 @@ Board is booted over PCIe interface.
				@@ -46,6 +45,6 @@ Board is booted over PCIe interface.

 Debugging
 =========
-The bcm958402m2_m7 board includes pads for soldering a JTAG connector.
+The ``bcm958402m2/bcm58402/m7`` board includes pads for soldering a JTAG connector.
 Zephyr applications running on the M7 core can also be tested
 by observing UART console output.
--- a/boards/digilent/zybo/doc/index.rst
+++ b/boards/digilent/zybo/doc/index.rst
@ -40,8 +40,8 @@ The zybo board configuration supports the following hardware features:
				@@ -40,8 +40,8 @@ The zybo board configuration supports the following hardware features:
 |            |            | serial port-interrupt               |
 +------------+------------+-------------------------------------+

-The default configuration can be found in the defconfig file:
-``boards/arm/zybo/zybo_defconfig``.
+The default configuration can be found in
+:zephyr_file:`boards/digilent/zybo/zybo_defconfig`

 Other hardware features are not currently supported by the port.

--- a/boards/google/google_kukui/doc/index.rst
+++ b/boards/google/google_kukui/doc/index.rst
@ -47,8 +47,8 @@ The following features are supported:
				@@ -47,8 +47,8 @@ The following features are supported:

 Other features (such as I2C) are not available in Zephyr.

-The default configuration can be found in the defconfig file:
-``boards/arm/google_kukui/google_kukui_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/google/google_kukui/google_kukui_defconfig`

 Connections and IOs
 ===================
--- a/boards/gumstix/96b_aerocore2/doc/index.rst
+++ b/boards/gumstix/96b_aerocore2/doc/index.rst
@ -79,9 +79,8 @@ features:
				@@ -79,9 +79,8 @@ features:

 More details about the board can be found at `96Boards website`_.

-The default configuration can be found in the defconfig file:
-
-        ``boards/arm/96b_aerocore2/96b_aerocore2_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/gumstix/96b_aerocore2/96b_aerocore2_defconfig`

 Connections and IOs
 ===================
--- a/boards/khadas/khadas_edgev/doc/index.rst
+++ b/boards/khadas/khadas_edgev/doc/index.rst
@ -31,9 +31,8 @@ hardware features:
				@@ -31,9 +31,8 @@ hardware features:

 Other hardware features have not been enabled yet for this board.

-The default configuration can be found in the defconfig file for NON-SMP:
-
-        ``boards/arm64/khadas_edgev/khadas_edgev_defconfig``
+The default configuration can be found in (NON-SMP)
+:zephyr_file:`boards/khadas/khadas_edgev/khadas_edgev_defconfig`

 There are multiple serial ports on the board: Zephyr is using
 uart2 as serial console.
--- a/boards/mikroe/mikroe_clicker_2/doc/mikroe_clicker_2.rst
+++ b/boards/mikroe/mikroe_clicker_2/doc/mikroe_clicker_2.rst
@ -54,9 +54,8 @@ The Zephyr MikroE Clicker 2 configuration supports the following hardware featur
				@@ -54,9 +54,8 @@ The Zephyr MikroE Clicker 2 configuration supports the following hardware featur

 Other hardware features have not been enabled yet for this board.

-The default configuration can be found in the defconfig file:
-
-	``boards/arm/mikroe_clicker_2/mikroe_clicker_2_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/mikroe/mikroe_clicker_2/mikroe_clicker_2_defconfig`

 Connections and IOs
 ===================
--- a/boards/mikroe/mikroe_mini_m4_for_stm32/doc/mikroe_mini_m4_for_stm32.rst
+++ b/boards/mikroe/mikroe_mini_m4_for_stm32/doc/mikroe_mini_m4_for_stm32.rst
@ -85,9 +85,8 @@ features:
				@@ -85,9 +85,8 @@ features:

 Other hardware features have not been enabled yet for this board.

-The default configuration can be found in the defconfig file:
-
-	``boards/arm/mikroe_mini_m4_for_stm32/mikroe_mini_m4_for_stm32_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/mikroe/mikroe_mini_m4_for_stm32/mikroe_mini_m4_for_stm32_defconfig`

 Serial Port
 ===========
--- a/boards/others/black_f407ve/doc/index.rst
+++ b/boards/others/black_f407ve/doc/index.rst
@ -118,9 +118,8 @@ features:
				@@ -118,9 +118,8 @@ features:

 Other hardware features are not yet supported on Zephyr porting.

-The default configuration can be found in the defconfig file:
-
-	``boards/arm/black_f407_generic/black_f407ve_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/others/black_f407_generic/black_f407ve_defconfig`


 Pin Mapping
--- a/boards/others/black_f407zg_pro/doc/index.rst
+++ b/boards/others/black_f407zg_pro/doc/index.rst
@ -115,9 +115,8 @@ features:
				@@ -115,9 +115,8 @@ features:

 Other hardware features are not yet supported on Zephyr porting.

-The default configuration can be found in the defconfig file:
-
-	``boards/arm/black_f407_generic/black_f407zg_pro_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/others/black_f407zg_pro/black_f407zg_pro_defconfig`


 Pin Mapping
--- a/boards/others/stm32f030_demo/doc/index.rst
+++ b/boards/others/stm32f030_demo/doc/index.rst
@ -59,8 +59,8 @@ hardware features:
				@@ -59,8 +59,8 @@ hardware features:

 Other hardware features are not yet supported on this Zephyr porting.

-The default configuration can be found in the defconfig file:
-``boards/arm/stm32f030_demo/stm32f030_demo_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/others/stm32f030_demo/stm32f030_demo_defconfig`

 Pin Mapping
 ===========
--- a/boards/others/stm32f401_mini/doc/index.rst
+++ b/boards/others/stm32f401_mini/doc/index.rst
@ -69,9 +69,8 @@ hardware features:
				@@ -69,9 +69,8 @@ hardware features:
 | USB OTG FS | on-chip    | USB device                          |
 +------------+------------+-------------------------------------+

-The default configuration can be found in the defconfig file:
-
-        ``boards/arm/stm32f401_mini/stm32f401_mini_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/others/stm32f401_mini/stm32f401_mini_defconfig`

 Default Zephyr Peripheral Mapping:
 ----------------------------------
--- a/boards/phytec/phyboard_lyra_am62x/doc/index.rst
+++ b/boards/phytec/phyboard_lyra_am62x/doc/index.rst
@ -86,11 +86,8 @@ an etching software onto an SD-card. This will boot Linux on the A53 application
				@@ -86,11 +86,8 @@ an etching software onto an SD-card. This will boot Linux on the A53 application
 cores of the SoM. These cores will then load the zephyr binary on the M4 core
 using remoteproc.

-The default configuration can be found in the defconfig file:
-
-.. code-block:: console
-
-   boards/arm/am62x_m4/am62x_m4_phyboard_lyra_defconfig
+The default configuration can be found in
+:zephyr_file:`boards/phytec/phyboard_lyra_am63x/phyboard_lyra_am62x_am6234_m4_defconfig`

 Flashing
 ********
--- a/boards/quicklogic/quick_feather/doc/index.rst
+++ b/boards/quicklogic/quick_feather/doc/index.rst
@ -44,8 +44,8 @@ features:
				@@ -44,8 +44,8 @@ features:
 | GPIO      | on-chip    | gpio                                |
 +-----------+------------+-------------------------------------+

-The default configuration can be found in the Kconfig file
-:zephyr_file:`boards/arm/quick_feather/quick_feather_defconfig`.
+The default configuration can be found in
+:zephyr_file:`boards/quicklogic/quick_feather/quick_feather_defconfig`.

 Connections and IOs
 ===================
--- a/boards/raspberrypi/rpi_4b/doc/index.rst
+++ b/boards/raspberrypi/rpi_4b/doc/index.rst
@ -34,9 +34,8 @@ hardware features:
				@@ -34,9 +34,8 @@ hardware features:

 Other hardware features have not been enabled yet for this board.

-The default configuration can be found in the defconfig file:
-
-        ``boards/arm64/rpi_4b/rpi_4b_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/raspberrypi/rpi_4b/rpi_4b_defconfig`

 Programming and Debugging
 *************************
--- a/boards/seeed/96b_carbon/doc/index.rst
+++ b/boards/seeed/96b_carbon/doc/index.rst
@ -100,9 +100,8 @@ features:
				@@ -100,9 +100,8 @@ features:

 More details about the board can be found at `96Boards website`_.

-The default configuration can be found in the defconfig file:
-
-        ``boards/arm/96b_carbon/96b_carbon_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/seeed/96b_carbon/96b_carbon_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/nucleo_c031c6/doc/index.rst
+++ b/boards/st/nucleo_c031c6/doc/index.rst
@ -93,8 +93,8 @@ The Zephyr nucleo_c031c6 board configuration supports the following hardware fea
				@@ -93,8 +93,8 @@ The Zephyr nucleo_c031c6 board configuration supports the following hardware fea

 Other hardware features are not yet supported in this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_c031c6/nucleo_c031c6_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_c031c6/nucleo_c031c6_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/nucleo_f030r8/doc/index.rst
+++ b/boards/st/nucleo_f030r8/doc/index.rst
@ -98,8 +98,8 @@ The Zephyr nucleo_f030r8 board configuration supports the following hardware fea
				@@ -98,8 +98,8 @@ The Zephyr nucleo_f030r8 board configuration supports the following hardware fea

 Other hardware features are not yet supported in this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f030r8/nucleo_f030r8_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f030r8/nucleo_f030r8_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/nucleo_f031k6/doc/index.rst
+++ b/boards/st/nucleo_f031k6/doc/index.rst
@ -73,8 +73,8 @@ The Zephyr nucleo_f031k6 board configuration supports the following hardware fea
				@@ -73,8 +73,8 @@ The Zephyr nucleo_f031k6 board configuration supports the following hardware fea

 Other hardware features are not yet supported in this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f031k6/nucleo_f031k6_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f031k6/nucleo_f031k6_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/nucleo_f042k6/doc/index.rst
+++ b/boards/st/nucleo_f042k6/doc/index.rst
@ -73,8 +73,8 @@ The Zephyr nucleo_f042k6 board configuration supports the following hardware fea
				@@ -73,8 +73,8 @@ The Zephyr nucleo_f042k6 board configuration supports the following hardware fea

 Other hardware features are not yet supported in this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f042k6/nucleo_f042k6_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f042k6/nucleo_f042k6_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/nucleo_f070rb/doc/index.rst
+++ b/boards/st/nucleo_f070rb/doc/index.rst
@ -97,8 +97,8 @@ The Zephyr nucleo_f070rb board configuration supports the following hardware fea
				@@ -97,8 +97,8 @@ The Zephyr nucleo_f070rb board configuration supports the following hardware fea

 Other hardware features are not yet supported in this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f070rb/nucleo_f070rb_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f070rb/nucleo_f070rb_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/nucleo_f091rc/doc/index.rst
+++ b/boards/st/nucleo_f091rc/doc/index.rst
@ -111,8 +111,8 @@ The Zephyr nucleo_f091rc board configuration supports the following hardware fea
				@@ -111,8 +111,8 @@ The Zephyr nucleo_f091rc board configuration supports the following hardware fea

 Other hardware features are not yet supported in this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f091rc/nucleo_f091rc_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f091rc/nucleo_f091rc_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/nucleo_f103rb/doc/index.rst
+++ b/boards/st/nucleo_f103rb/doc/index.rst
@ -104,8 +104,8 @@ The Zephyr nucleo_f103rb board configuration supports the following hardware fea
				@@ -104,8 +104,8 @@ The Zephyr nucleo_f103rb board configuration supports the following hardware fea

 Other hardware features are not yet supported in this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f103rb/nucleo_f103rb_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f103rb/nucleo_f103rb_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/nucleo_f302r8/doc/index.rst
+++ b/boards/st/nucleo_f302r8/doc/index.rst
@ -100,8 +100,8 @@ features:
				@@ -100,8 +100,8 @@ features:

 Other hardware features are not yet supported on this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f302r8/nucleo_f302r8_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f302r8/nucleo_f302r8_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/nucleo_f303k8/doc/index.rst
+++ b/boards/st/nucleo_f303k8/doc/index.rst
@ -96,8 +96,8 @@ features:
				@@ -96,8 +96,8 @@ features:

 Other hardware features are not yet supported on this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f303k8/nucleo_f303k8_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f303k8/nucleo_f303k8_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/nucleo_f303re/doc/index.rst
+++ b/boards/st/nucleo_f303re/doc/index.rst
@ -99,8 +99,8 @@ features:
				@@ -99,8 +99,8 @@ features:

 Other hardware features are not yet supported on this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f303re/nucleo_f303re_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f303re/nucleo_f303re_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/nucleo_f334r8/doc/index.rst
+++ b/boards/st/nucleo_f334r8/doc/index.rst
@ -94,8 +94,8 @@ The Zephyr nucleo_f334r8 board configuration supports the following hardware fea
				@@ -94,8 +94,8 @@ The Zephyr nucleo_f334r8 board configuration supports the following hardware fea

 Other hardware features are not yet supported in this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f334r8/nucleo_f334r8_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f334r8/nucleo_f334r8_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/nucleo_f401re/doc/index.rst
+++ b/boards/st/nucleo_f401re/doc/index.rst
@ -90,8 +90,8 @@ The Zephyr nucleo_401re board configuration supports the following hardware feat
				@@ -90,8 +90,8 @@ The Zephyr nucleo_401re board configuration supports the following hardware feat

 Other hardware features are not yet supported on Zephyr porting.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f401re/nucleo_f401re_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f401re/nucleo_f401re_defconfig`


 Pin Mapping
--- a/boards/st/nucleo_f410rb/doc/index.rst
+++ b/boards/st/nucleo_f410rb/doc/index.rst
@ -95,8 +95,8 @@ The Zephyr nucleo_f410rb board configuration supports the following hardware fea
				@@ -95,8 +95,8 @@ The Zephyr nucleo_f410rb board configuration supports the following hardware fea

 Other hardware features are not yet supported on this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f410rb/nucleo_f410rb_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f410rb/nucleo_f410rb_defconfig`


 Connections and IOs
--- a/boards/st/nucleo_f411re/doc/index.rst
+++ b/boards/st/nucleo_f411re/doc/index.rst
@ -88,8 +88,8 @@ The Zephyr nucleo_f411re board configuration supports the following hardware fea
				@@ -88,8 +88,8 @@ The Zephyr nucleo_f411re board configuration supports the following hardware fea

 Other hardware features are not yet supported on this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f411re/nucleo_f411re_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f411re/nucleo_f411re_defconfig`


 Connections and IOs
--- a/boards/st/nucleo_f412zg/doc/index.rst
+++ b/boards/st/nucleo_f412zg/doc/index.rst
@ -92,8 +92,8 @@ The Zephyr nucleo_412zg board configuration supports the following hardware feat
				@@ -92,8 +92,8 @@ The Zephyr nucleo_412zg board configuration supports the following hardware feat

 Other hardware features are not yet supported on this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f412zg/nucleo_f412zg_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f412zg/nucleo_f412zg_defconfig`


 Connections and IOs
--- a/boards/st/nucleo_f413zh/doc/index.rst
+++ b/boards/st/nucleo_f413zh/doc/index.rst
@ -92,8 +92,8 @@ The Zephyr nucleo_413zh board configuration supports the following hardware feat
				@@ -92,8 +92,8 @@ The Zephyr nucleo_413zh board configuration supports the following hardware feat

 Other hardware features are not yet supported on this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f413zh/nucleo_f413zh_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f413zh/nucleo_f413zh_defconfig`


 Connections and IOs
--- a/boards/st/nucleo_f429zi/doc/index.rst
+++ b/boards/st/nucleo_f429zi/doc/index.rst
@ -114,8 +114,8 @@ The Zephyr nucleo_f429zi board configuration supports the following hardware fea
				@@ -114,8 +114,8 @@ The Zephyr nucleo_f429zi board configuration supports the following hardware fea

 Other hardware features are not yet supported on this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f429zi/nucleo_f429zi_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f429zi/nucleo_f429zi_defconfig`


 Connections and IOs
--- a/boards/st/nucleo_f446re/doc/index.rst
+++ b/boards/st/nucleo_f446re/doc/index.rst
@ -93,8 +93,8 @@ The Zephyr nucleo_f446re board configuration supports the following hardware fea
				@@ -93,8 +93,8 @@ The Zephyr nucleo_f446re board configuration supports the following hardware fea

 Other hardware features are not yet supported on this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f446re/nucleo_f446re_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f446re/nucleo_f446re_defconfig`


 Connections and IOs
--- a/boards/st/nucleo_f446ze/doc/index.rst
+++ b/boards/st/nucleo_f446ze/doc/index.rst
@ -104,8 +104,8 @@ The Zephyr nucleo_f446ze board configuration supports the following hardware fea
				@@ -104,8 +104,8 @@ The Zephyr nucleo_f446ze board configuration supports the following hardware fea

 Other hardware features are not yet supported on this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f446ze/nucleo_f446ze_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f446ze/nucleo_f446ze_defconfig`


 Connections and IOs
--- a/boards/st/nucleo_f746zg/doc/index.rst
+++ b/boards/st/nucleo_f746zg/doc/index.rst
@ -125,8 +125,8 @@ features:
				@@ -125,8 +125,8 @@ features:

 Other hardware features are not yet supported on this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f746zg/nucleo_f746zg_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f746zg/nucleo_f746zg_defconfig`

 For more details please refer to `STM32 Nucleo-144 board User Manual`_.

--- a/boards/st/nucleo_f756zg/doc/index.rst
+++ b/boards/st/nucleo_f756zg/doc/index.rst
@ -115,8 +115,8 @@ features:
				@@ -115,8 +115,8 @@ features:

 Other hardware features are not yet supported on this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f756zg/nucleo_f756zg_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f756zg/nucleo_f756zg_defconfig`

 For more details please refer to `STM32 Nucleo-144 board User Manual`_.

--- a/boards/st/nucleo_f767zi/doc/index.rst
+++ b/boards/st/nucleo_f767zi/doc/index.rst
@ -132,8 +132,8 @@ features:
				@@ -132,8 +132,8 @@ features:

 Other hardware features are not yet supported on this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_f767zi/nucleo_f767zi_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_f767zi/nucleo_f767zi_defconfig`

 For more details please refer to `STM32 Nucleo-144 board User Manual`_.

--- a/boards/st/nucleo_l152re/doc/index.rst
+++ b/boards/st/nucleo_l152re/doc/index.rst
@ -103,8 +103,8 @@ The Zephyr nucleo_l152re board configuration supports the following hardware fea
				@@ -103,8 +103,8 @@ The Zephyr nucleo_l152re board configuration supports the following hardware fea

 Other hardware features are not yet supported in this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_l152re/nucleo_l152re_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/nucleo_l152re/nucleo_l152re_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/steval_fcu001v1/doc/index.rst
+++ b/boards/st/steval_fcu001v1/doc/index.rst
@ -66,8 +66,8 @@ The Zephyr steval_fcu001v1 board configuration supports the following hardware f
				@@ -66,8 +66,8 @@ The Zephyr steval_fcu001v1 board configuration supports the following hardware f
 +-----------+------------+------------------------------------+


-The default configuration can be found in the defconfig file:
-``boards/arm/steval_fcu001v1/steval_fcu001v1_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/steval_fcu001v1/steval_fcu001v1_defconfig`

 Default Zephyr Peripheral Mapping:
 ----------------------------------
--- a/boards/st/stm3210c_eval/doc/index.rst
+++ b/boards/st/stm3210c_eval/doc/index.rst
@ -80,8 +80,8 @@ The Zephyr stm3210c_eval board configuration supports the following hardware fea
				@@ -80,8 +80,8 @@ The Zephyr stm3210c_eval board configuration supports the following hardware fea

 Other hardware features are not yet supported in this Zephyr port.

-The default configuration can be found in the defconfig file
-:zephyr_file:`boards/arm/stm3210c_eval/stm3210c_eval_defconfig`.
+The default configuration can be found in
+:zephyr_file:`boards/st/stm3210c_eval/stm3210c_eval_defconfig`.

 Connections and IOs
 ===================
--- a/boards/st/stm32373c_eval/doc/index.rst
+++ b/boards/st/stm32373c_eval/doc/index.rst
@ -84,8 +84,8 @@ The Zephyr stm32373c_eval board configuration supports the following hardware fe
				@@ -84,8 +84,8 @@ The Zephyr stm32373c_eval board configuration supports the following hardware fe

 Other hardware features are not yet supported in this Zephyr port.

-The default configuration can be found in the defconfig file
-:zephyr_file:`boards/arm/stm32373c_eval/stm32373c_eval_defconfig`
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32373c_eval/stm32373c_eval_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/stm32f072_eval/doc/index.rst
+++ b/boards/st/stm32f072_eval/doc/index.rst
@ -99,9 +99,8 @@ The Zephyr stm32f072_eval board configuration supports the following hardware fe
				@@ -99,9 +99,8 @@ The Zephyr stm32f072_eval board configuration supports the following hardware fe

 Other hardware features are not yet supported on this Zephyr porting.

-The default configuration can be found in the defconfig file:
-
-	``boards/arm/stm32f072_eval/stm32f072_eval_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32f072_eval/stm32f072_eval_defconfig`


 Pin Mapping
--- a/boards/st/stm32f072b_disco/doc/index.rst
+++ b/boards/st/stm32f072b_disco/doc/index.rst
@ -97,9 +97,8 @@ features:
				@@ -97,9 +97,8 @@ features:

 Other hardware features are not yet supported in this Zephyr port.

-The default configuration can be found in the defconfig file:
-
-	``boards/arm/stm32f072b_disco/stm32f072b_disco_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32f072b_disco/stm32f072b_disco_defconfig`


 Pin Mapping
--- a/boards/st/stm32f0_disco/doc/index.rst
+++ b/boards/st/stm32f0_disco/doc/index.rst
@ -70,8 +70,8 @@ The Zephyr stm32f0_disco board configuration supports the following hardware fea
				@@ -70,8 +70,8 @@ The Zephyr stm32f0_disco board configuration supports the following hardware fea

 Other hardware features are not yet supported in this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/stm32f0_disco/stm32f0_disco_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32f0_disco/stm32f0_disco_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/stm32f103_mini/doc/index.rst
+++ b/boards/st/stm32f103_mini/doc/index.rst
@ -80,8 +80,8 @@ The Zephyr stm32f103_mini board configuration supports the following hardware fe
				@@ -80,8 +80,8 @@ The Zephyr stm32f103_mini board configuration supports the following hardware fe

 Other hardware features are not yet supported in this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/stm32f103_mini/stm32f103_mini_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32f103_mini/stm32f103_mini_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/stm32f3_disco/doc/index.rst
+++ b/boards/st/stm32f3_disco/doc/index.rst
@ -112,9 +112,8 @@ features:
				@@ -112,9 +112,8 @@ features:

 Other hardware features are not yet supported on Zephyr porting.

-The default configuration can be found in the defconfig file:
-
-	``boards/arm/stm32f3_disco/stm32f3_disco_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32f3_disco/stm32f3_disco_defconfig`


 Pin Mapping
--- a/boards/st/stm32f411e_disco/doc/index.rst
+++ b/boards/st/stm32f411e_disco/doc/index.rst
@ -86,8 +86,8 @@ hardware features:
				@@ -86,8 +86,8 @@ hardware features:

 Other hardware features are not yet supported on Zephyr porting.

-The default configuration can be found in the defconfig file
-:zephyr_file:`boards/arm/stm32f411e_disco/stm32f411e_disco_defconfig`
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32f411e_disco/stm32f411e_disco_defconfig`


 Pin Mapping
--- a/boards/st/stm32f412g_disco/doc/index.rst
+++ b/boards/st/stm32f412g_disco/doc/index.rst
@ -102,9 +102,8 @@ The Zephyr stm32f412g_disco board configuration supports the following hardware
				@@ -102,9 +102,8 @@ The Zephyr stm32f412g_disco board configuration supports the following hardware

 Other hardware features are not yet supported on Zephyr porting.

-The default configuration can be found in the defconfig file:
-
-	``boards/arm/stm32f412g_disco/stm32f412g_disco_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32f412g_disco/stm32f412g_disco_defconfig`


 Pin Mapping
--- a/boards/st/stm32f429i_disc1/doc/index.rst
+++ b/boards/st/stm32f429i_disc1/doc/index.rst
@ -102,9 +102,8 @@ The Zephyr stm32f429i_disc1 board configuration supports the following hardware
				@@ -102,9 +102,8 @@ The Zephyr stm32f429i_disc1 board configuration supports the following hardware

 Other hardware features are not yet supported on Zephyr porting.

-The default configuration can be found in the defconfig file:
-
-	``boards/arm/stm32f429i_disc1/stm32f429i_disc1_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32f429i_disc1/stm32f429i_disc1_defconfig`


 Pin Mapping
--- a/boards/st/stm32f469i_disco/doc/index.rst
+++ b/boards/st/stm32f469i_disco/doc/index.rst
@ -102,9 +102,8 @@ The Zephyr stm32f469i_disco board configuration supports the following hardware
				@@ -102,9 +102,8 @@ The Zephyr stm32f469i_disco board configuration supports the following hardware

 Other hardware features are not yet supported on Zephyr porting.

-The default configuration can be found in the defconfig file:
-
-	``boards/arm/stm32f469i_disco/stm32f469i_disco_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32f469i_disco/stm32f469i_disco_defconfig`


 Pin Mapping
--- a/boards/st/stm32f4_disco/doc/index.rst
+++ b/boards/st/stm32f4_disco/doc/index.rst
@ -103,9 +103,8 @@ The Zephyr stm32f4_disco board configuration supports the following hardware fea
				@@ -103,9 +103,8 @@ The Zephyr stm32f4_disco board configuration supports the following hardware fea

 Other hardware features are not yet supported on Zephyr porting.

-The default configuration can be found in the defconfig file:
-
-	``boards/arm/stm32f4_disco/stm32f4_disco_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32f4_disco/stm32f4_disco_defconfig`


 Pin Mapping
--- a/boards/st/stm32f723e_disco/doc/index.rst
+++ b/boards/st/stm32f723e_disco/doc/index.rst
@ -90,8 +90,8 @@ The Zephyr stm32f723e_disco board configuration supports the following hardware
				@@ -90,8 +90,8 @@ The Zephyr stm32f723e_disco board configuration supports the following hardware

 Other hardware features are not yet supported on Zephyr porting.

-The default configuration can be found in the defconfig file:
-``boards/arm/stm32f723e_disco/stm32f723e_disco_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32f723e_disco/stm32f723e_disco_defconfig`

 Pin Mapping
 ===========
--- a/boards/st/stm32f746g_disco/doc/index.rst
+++ b/boards/st/stm32f746g_disco/doc/index.rst
@ -121,8 +121,8 @@ The Zephyr stm32f746g_disco board configuration supports the following hardware
				@@ -121,8 +121,8 @@ The Zephyr stm32f746g_disco board configuration supports the following hardware

 Other hardware features are not yet supported on Zephyr porting.

-The default configuration can be found in the defconfig file:
-``boards/arm/stm32f746g_disco/stm32f746g_disco_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32f746g_disco/stm32f746g_disco_defconfig`

 Pin Mapping
 ===========
--- a/boards/st/stm32f7508_dk/doc/index.rst
+++ b/boards/st/stm32f7508_dk/doc/index.rst
@ -116,8 +116,8 @@ The Zephyr stm32f7508_dk board configuration supports the following hardware fea
				@@ -116,8 +116,8 @@ The Zephyr stm32f7508_dk board configuration supports the following hardware fea

 Other hardware features are not yet supported on Zephyr porting.

-The default configuration can be found in the defconfig file:
-``boards/arm/stm32f7508_dk/stm32f7508_dk_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32f7508_dk/stm32f7508_dk_defconfig`

 Pin Mapping
 ===========
--- a/boards/st/stm32f769i_disco/doc/index.rst
+++ b/boards/st/stm32f769i_disco/doc/index.rst
@ -123,8 +123,8 @@ The Zephyr stm32f769i_disco board configuration supports the following hardware
				@@ -123,8 +123,8 @@ The Zephyr stm32f769i_disco board configuration supports the following hardware

 Other hardware features are not yet supported on Zephyr porting.

-The default configuration can be found in the defconfig file:
-``boards/arm/stm32f769i_disco/stm32f769i_disco_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32f769i_disco/stm32f769i_disco_defconfig`

 Pin Mapping
 ===========
--- a/boards/st/stm32l1_disco/doc/index.rst
+++ b/boards/st/stm32l1_disco/doc/index.rst
@ -92,8 +92,8 @@ The Zephyr stm32l1_disco board configuration supports the following hardware fea
				@@ -92,8 +92,8 @@ The Zephyr stm32l1_disco board configuration supports the following hardware fea

 Other hardware features are not yet supported in this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/stm32l1_disco/stm32l1_disco_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32l1_disco/stm32l1_disco_defconfig`

 Connections and IOs
 ===================
--- a/boards/st/stm32mp157c_dk2/doc/stm32mp157_dk2.rst
+++ b/boards/st/stm32mp157c_dk2/doc/stm32mp157_dk2.rst
@ -178,8 +178,8 @@ features:
				@@ -178,8 +178,8 @@ features:
 | SPI       | on-chip    | spi                                 |
 +-----------+------------+-------------------------------------+

-The default configuration can be found in the defconfig file:
-``boards/arm/stm32mp157c_dk2/stm32mp157c_dk2_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32mp157c_dk2/stm32mp157c_dk2_defconfig`


 Connections and IOs
--- a/boards/st/stm32vl_disco/doc/index.rst
+++ b/boards/st/stm32vl_disco/doc/index.rst
@ -84,8 +84,8 @@ The Zephyr stm32vl_disco board configuration supports the following hardware fea
				@@ -84,8 +84,8 @@ The Zephyr stm32vl_disco board configuration supports the following hardware fea

 Other hardware features are not yet supported in this Zephyr port.

-The default configuration can be found in the defconfig file:
-``boards/arm/stm32vl_disco/stm32vl_disco_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/st/stm32vl_disco/stm32vl_disco_defconfig`

 Connections and IOs
 ===================
--- a/boards/ti/sk_am62/doc/index.rst
+++ b/boards/ti/sk_am62/doc/index.rst
@ -84,11 +84,8 @@ Download TI's official `WIC`_ and flash the WIC file with an etching software
				@@ -84,11 +84,8 @@ Download TI's official `WIC`_ and flash the WIC file with an etching software
 onto an SD-card. This will boot Linux on the A53 application cores of the EVM.
 These cores will then load the zephyr binary on the M4 core using remoteproc.

-The default configuration can be found in the defconfig file:
-
-.. code-block:: console
-
-   boards/arm/am62x_m4/am62x_m4_sk_defconfig
+The default configuration can be found in
+:zephyr_file:`boards/ti/sk_am62/sk_am62_am6234_m4_defconfig`

 Flashing
 ********
--- a/boards/weact/blackpill_f401cc/doc/index.rst
+++ b/boards/weact/blackpill_f401cc/doc/index.rst
@ -71,9 +71,8 @@ hardware features:
				@@ -71,9 +71,8 @@ hardware features:
 | USB OTG FS | on-chip    | USB device                          |
 +------------+------------+-------------------------------------+

-The default configuration can be found in the defconfig file:
-
-        ``boards/arm/blackpill_f401ce/blackpill_f401ce_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/weact/blackpill_f401cc/blackpill_f401ce_defconfig`

 Pin Mapping
 ===========
--- a/boards/weact/blackpill_f401ce/doc/index.rst
+++ b/boards/weact/blackpill_f401ce/doc/index.rst
@ -71,9 +71,8 @@ hardware features:
				@@ -71,9 +71,8 @@ hardware features:
 | USB OTG FS | on-chip    | USB device                          |
 +------------+------------+-------------------------------------+

-The default configuration can be found in the defconfig file:
-
-        ``boards/arm/blackpill_f401ce/blackpill_f401ce_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/weact/blackpill_f401ce/blackpill_f401ce_defconfig`

 Pin Mapping
 ===========
--- a/boards/weact/blackpill_f411ce/doc/index.rst
+++ b/boards/weact/blackpill_f411ce/doc/index.rst
@ -71,9 +71,8 @@ hardware features:
				@@ -71,9 +71,8 @@ hardware features:
 | USB OTG FS | on-chip    | USB device                          |
 +------------+------------+-------------------------------------+

-The default configuration can be found in the defconfig file:
-
-        ``boards/arm/stm32_blackpill_v2/stm32_blackpill_v2_defconfig``
+The default configuration can be found in
+:zephyr_file:`boards/weact/stm32_blackpill_v2/stm32_blackpill_v2_defconfig`

 Pin Mapping
 ===========
--- a/boards/xenvm/doc/index.rst
+++ b/boards/xenvm/doc/index.rst
@ -32,11 +32,11 @@ The following hardware features are supported:
				@@ -32,11 +32,11 @@ The following hardware features are supported:

 The kernel currently does not support other hardware features on this platform.

-The default configuration using GICv2 can be found in the defconfig file:
-    ``boards/arm64/xenvm/xenvm_defconfig``
+The default configuration using GICv2 can be found in
+:zephyr_file:`boards/xenvm/xenvm_defconfig`

-The default configuration using GICv3 can be found in the defconfig file:
-    ``boards/arm64/xenvm/xenvm_gicv3_defconfig``
+The default configuration using GICv3 can be found in
+:zephyr_file:`boards/xenvm/xenvm_xenvm_gicv3_defconfig`

 Devices
 ========