boards: nxp: Removing CONFIG_PINCTRL from the boards defconfig

The Drivers using Pinctrl should be turning Pinctrl on this should not be the responsibility of the board. This commit removes CONFIG_PINCTRL from the boards side for nxp boards. Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
10 months ago · 82a192c8a9
106 changed files with 45 additions and 74 deletions
--- a/boards/nxp/frdm_k22f/frdm_k22f_defconfig
+++ b/boards/nxp/frdm_k22f/frdm_k22f_defconfig
@ -10,6 +10,5 @@ CONFIG_CONSOLE=y
				@@ -10,6 +10,5 @@ CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=72000000
 CONFIG_OSC_LOW_POWER=y
--- a/boards/nxp/frdm_k64f/frdm_k64f_defconfig
+++ b/boards/nxp/frdm_k64f/frdm_k64f_defconfig
@ -4,7 +4,6 @@ CONFIG_CONSOLE=y
				@@ -4,7 +4,6 @@ CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=120000000
 CONFIG_OSC_EXTERNAL=y

--- a/boards/nxp/frdm_k82f/frdm_k82f_defconfig
+++ b/boards/nxp/frdm_k82f/frdm_k82f_defconfig
@ -4,7 +4,6 @@ CONFIG_SERIAL=y
				@@ -4,7 +4,6 @@ CONFIG_SERIAL=y
 CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
-CONFIG_PINCTRL=y
 CONFIG_GPIO=y
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=120000000
 CONFIG_OSC_LOW_POWER=y
--- a/boards/nxp/frdm_ke15z/frdm_ke15z_defconfig
+++ b/boards/nxp/frdm_ke15z/frdm_ke15z_defconfig
@ -12,6 +12,3 @@ CONFIG_GPIO=y
				@@ -12,6 +12,3 @@ CONFIG_GPIO=y

 # Clock Control
 CONFIG_CLOCK_CONTROL=y
-
-# Enable pin controller
-CONFIG_PINCTRL=y
--- a/boards/nxp/frdm_ke17z/frdm_ke17z_defconfig
+++ b/boards/nxp/frdm_ke17z/frdm_ke17z_defconfig
@ -14,6 +14,3 @@ CONFIG_GPIO=y
				@@ -14,6 +14,3 @@ CONFIG_GPIO=y

 # Clock Control
 CONFIG_CLOCK_CONTROL=y
-
-# Enable pin controller
-CONFIG_PINCTRL=y
--- a/boards/nxp/frdm_ke17z512/frdm_ke17z512_defconfig
+++ b/boards/nxp/frdm_ke17z512/frdm_ke17z512_defconfig
@ -8,4 +8,3 @@ CONFIG_CONSOLE=y
				@@ -8,4 +8,3 @@ CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/frdm_kl25z/frdm_kl25z_defconfig
+++ b/boards/nxp/frdm_kl25z/frdm_kl25z_defconfig
@ -4,6 +4,5 @@ CONFIG_CONSOLE=y
				@@ -4,6 +4,5 @@ CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=48000000
 CONFIG_OSC_LOW_POWER=y
--- a/boards/nxp/frdm_kw41z/frdm_kw41z_defconfig
+++ b/boards/nxp/frdm_kw41z/frdm_kw41z_defconfig
@ -4,6 +4,5 @@ CONFIG_CONSOLE=y
				@@ -4,6 +4,5 @@ CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=40000000
 CONFIG_OSC_EXTERNAL=y
--- a/boards/nxp/frdm_mcxa156/frdm_mcxa156_defconfig
+++ b/boards/nxp/frdm_mcxa156/frdm_mcxa156_defconfig
@ -9,4 +9,3 @@ CONFIG_UART_CONSOLE=y
				@@ -9,4 +9,3 @@ CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/frdm_mcxn236/frdm_mcxn236_defconfig
+++ b/boards/nxp/frdm_mcxn236/frdm_mcxn236_defconfig
@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
				@@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y

 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
--- a/boards/nxp/frdm_mcxn947/frdm_mcxn947_mcxn947_cpu0_defconfig
+++ b/boards/nxp/frdm_mcxn947/frdm_mcxn947_mcxn947_cpu0_defconfig
@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
				@@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y

 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
--- a/boards/nxp/frdm_mcxn947/frdm_mcxn947_mcxn947_cpu0_qspi_defconfig
+++ b/boards/nxp/frdm_mcxn947/frdm_mcxn947_mcxn947_cpu0_qspi_defconfig
@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
				@@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y

 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
--- a/boards/nxp/frdm_mcxw71/frdm_mcxw71_defconfig
+++ b/boards/nxp/frdm_mcxw71/frdm_mcxw71_defconfig
@ -6,7 +6,6 @@
				@@ -6,7 +6,6 @@

 CONFIG_ARM_MPU=y
 CONFIG_TRUSTED_EXECUTION_SECURE=y
-CONFIG_PINCTRL=y
 CONFIG_SERIAL=y
 CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
--- a/boards/nxp/frdm_rw612/frdm_rw612_defconfig
+++ b/boards/nxp/frdm_rw612/frdm_rw612_defconfig
@ -7,7 +7,6 @@
				@@ -7,7 +7,6 @@
 CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
-CONFIG_PINCTRL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
--- a/boards/nxp/hexiwear/hexiwear_mk64f12_defconfig
+++ b/boards/nxp/hexiwear/hexiwear_mk64f12_defconfig
@ -4,7 +4,6 @@ CONFIG_CONSOLE=y
				@@ -4,7 +4,6 @@ CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=120000000
 CONFIG_OSC_LOW_POWER=y
 CONFIG_ARM_MPU=y
--- a/boards/nxp/hexiwear/hexiwear_mkw40z4_defconfig
+++ b/boards/nxp/hexiwear/hexiwear_mkw40z4_defconfig
@ -3,7 +3,6 @@
				@@ -3,7 +3,6 @@
 CONFIG_CONSOLE=y
 CONFIG_RTT_CONSOLE=y
 CONFIG_USE_SEGGER_RTT=y
-CONFIG_PINCTRL=y
 CONFIG_GPIO=y
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=40000000
 CONFIG_OSC_EXTERNAL=y
--- a/boards/nxp/imx8mm_evk/imx8mm_evk_mimx8mm6_a53_defconfig
+++ b/boards/nxp/imx8mm_evk/imx8mm_evk_mimx8mm6_a53_defconfig
@ -24,4 +24,3 @@ CONFIG_CONSOLE=y
				@@ -24,4 +24,3 @@ CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y

 CONFIG_CLOCK_CONTROL=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/imx8mm_evk/imx8mm_evk_mimx8mm6_a53_smp_defconfig
+++ b/boards/nxp/imx8mm_evk/imx8mm_evk_mimx8mm6_a53_smp_defconfig
@ -29,4 +29,3 @@ CONFIG_CONSOLE=y
				@@ -29,4 +29,3 @@ CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y

 CONFIG_CLOCK_CONTROL=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/imx8mm_evk/imx8mm_evk_mimx8mm6_m4_defconfig
+++ b/boards/nxp/imx8mm_evk/imx8mm_evk_mimx8mm6_m4_defconfig
@ -11,4 +11,3 @@ CONFIG_SERIAL=y
				@@ -11,4 +11,3 @@ CONFIG_SERIAL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_CONSOLE=y
 CONFIG_XIP=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/imx8mn_evk/imx8mn_evk_mimx8mn6_a53_defconfig
+++ b/boards/nxp/imx8mn_evk/imx8mn_evk_mimx8mn6_a53_defconfig
@ -24,4 +24,3 @@ CONFIG_CONSOLE=y
				@@ -24,4 +24,3 @@ CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y

 CONFIG_CLOCK_CONTROL=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/imx8mn_evk/imx8mn_evk_mimx8mn6_a53_smp_defconfig
+++ b/boards/nxp/imx8mn_evk/imx8mn_evk_mimx8mn6_a53_smp_defconfig
@ -29,4 +29,3 @@ CONFIG_CONSOLE=y
				@@ -29,4 +29,3 @@ CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y

 CONFIG_CLOCK_CONTROL=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/imx8mp_evk/imx8mp_evk_mimx8ml8_a53_defconfig
+++ b/boards/nxp/imx8mp_evk/imx8mp_evk_mimx8ml8_a53_defconfig
@ -24,4 +24,3 @@ CONFIG_CONSOLE=y
				@@ -24,4 +24,3 @@ CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y

 CONFIG_CLOCK_CONTROL=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/imx8mp_evk/imx8mp_evk_mimx8ml8_a53_smp_defconfig
+++ b/boards/nxp/imx8mp_evk/imx8mp_evk_mimx8ml8_a53_smp_defconfig
@ -29,4 +29,3 @@ CONFIG_CONSOLE=y
				@@ -29,4 +29,3 @@ CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y

 CONFIG_CLOCK_CONTROL=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/imx8mp_evk/imx8mp_evk_mimx8ml8_adsp_defconfig
+++ b/boards/nxp/imx8mp_evk/imx8mp_evk_mimx8ml8_adsp_defconfig
@ -20,6 +20,3 @@ CONFIG_CONSOLE=y
				@@ -20,6 +20,3 @@ CONFIG_CONSOLE=y

 # uart console (overrides remote proc console)
 CONFIG_UART_CONSOLE=y
-
-# enable pin controller
-CONFIG_PINCTRL=y
--- a/boards/nxp/imx8mp_evk/imx8mp_evk_mimx8ml8_m7_ddr_defconfig
+++ b/boards/nxp/imx8mp_evk/imx8mp_evk_mimx8ml8_m7_ddr_defconfig
@ -11,4 +11,3 @@ CONFIG_UART_INTERRUPT_DRIVEN=y
				@@ -11,4 +11,3 @@ CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_CONSOLE=y
 CONFIG_XIP=y
 CONFIG_CODE_DDR=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/imx8mp_evk/imx8mp_evk_mimx8ml8_m7_defconfig
+++ b/boards/nxp/imx8mp_evk/imx8mp_evk_mimx8ml8_m7_defconfig
@ -11,4 +11,3 @@ CONFIG_UART_INTERRUPT_DRIVEN=y
				@@ -11,4 +11,3 @@ CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_CONSOLE=y
 CONFIG_XIP=y
 CONFIG_CODE_ITCM=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/imx8mq_evk/imx8mq_evk_mimx8mq6_m4_defconfig
+++ b/boards/nxp/imx8mq_evk/imx8mq_evk_mimx8mq6_m4_defconfig
@ -11,4 +11,3 @@ CONFIG_SERIAL=y
				@@ -11,4 +11,3 @@ CONFIG_SERIAL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_CONSOLE=y
 CONFIG_XIP=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/imx93_evk/imx93_evk_mimx9352_a55_defconfig
+++ b/boards/nxp/imx93_evk/imx93_evk_mimx9352_a55_defconfig
@ -28,4 +28,3 @@ CONFIG_CONSOLE=y
				@@ -28,4 +28,3 @@ CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y

 CONFIG_CLOCK_CONTROL=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/imx93_evk/imx93_evk_mimx9352_m33_defconfig
+++ b/boards/nxp/imx93_evk/imx93_evk_mimx9352_m33_defconfig
@ -2,7 +2,6 @@
				@@ -2,7 +2,6 @@
 # SPDX-License-Identifier: Apache-2.0

 CONFIG_CLOCK_CONTROL=y
-CONFIG_PINCTRL=y
 CONFIG_SERIAL=y
 CONFIG_UART_CONSOLE=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
--- a/boards/nxp/lpcxpresso54114/lpcxpresso54114_lpc54114_m0_defconfig
+++ b/boards/nxp/lpcxpresso54114/lpcxpresso54114_lpc54114_m0_defconfig
@ -8,4 +8,3 @@ CONFIG_USE_SEGGER_RTT=y
				@@ -8,4 +8,3 @@ CONFIG_USE_SEGGER_RTT=y
 CONFIG_SERIAL=n
 CONFIG_GPIO=n
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=48000000
-CONFIG_PINCTRL=y
--- a/boards/nxp/lpcxpresso54114/lpcxpresso54114_lpc54114_m4_defconfig
+++ b/boards/nxp/lpcxpresso54114/lpcxpresso54114_lpc54114_m4_defconfig
@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
				@@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=48000000
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
--- a/boards/nxp/lpcxpresso55s06/lpcxpresso55s06_defconfig
+++ b/boards/nxp/lpcxpresso55s06/lpcxpresso55s06_defconfig
@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
				@@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y
 CONFIG_ARM_MPU=y

 CONFIG_RUNTIME_NMI=y
--- a/boards/nxp/lpcxpresso55s16/lpcxpresso55s16_defconfig
+++ b/boards/nxp/lpcxpresso55s16/lpcxpresso55s16_defconfig
@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
				@@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y
 CONFIG_ARM_MPU=y

 CONFIG_RUNTIME_NMI=y
--- a/boards/nxp/lpcxpresso55s28/lpcxpresso55s28_defconfig
+++ b/boards/nxp/lpcxpresso55s28/lpcxpresso55s28_defconfig
@ -10,7 +10,6 @@ CONFIG_UART_CONSOLE=y
				@@ -10,7 +10,6 @@ CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y

--- a/boards/nxp/lpcxpresso55s36/lpcxpresso55s36_defconfig
+++ b/boards/nxp/lpcxpresso55s36/lpcxpresso55s36_defconfig
@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
				@@ -9,7 +9,6 @@ CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y
 CONFIG_ARM_MPU=y

 CONFIG_RUNTIME_NMI=y
--- a/boards/nxp/lpcxpresso55s69/lpcxpresso55s69_lpc55s69_cpu0_defconfig
+++ b/boards/nxp/lpcxpresso55s69/lpcxpresso55s69_lpc55s69_cpu0_defconfig
@ -5,7 +5,6 @@
				@@ -5,7 +5,6 @@
 #

 CONFIG_GPIO=y
-CONFIG_PINCTRL=y

 CONFIG_RUNTIME_NMI=y

--- a/boards/nxp/lpcxpresso55s69/lpcxpresso55s69_lpc55s69_cpu0_ns_defconfig
+++ b/boards/nxp/lpcxpresso55s69/lpcxpresso55s69_lpc55s69_cpu0_ns_defconfig
@ -5,7 +5,6 @@
				@@ -5,7 +5,6 @@
 #

 CONFIG_GPIO=y
-CONFIG_PINCTRL=y

 CONFIG_RUNTIME_NMI=y

--- a/boards/nxp/mimxrt1010_evk/mimxrt1010_evk_defconfig
+++ b/boards/nxp/mimxrt1010_evk/mimxrt1010_evk_defconfig
@ -10,4 +10,3 @@ CONFIG_SERIAL=y
				@@ -10,4 +10,3 @@ CONFIG_SERIAL=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/mimxrt1015_evk/mimxrt1015_evk_defconfig
+++ b/boards/nxp/mimxrt1015_evk/mimxrt1015_evk_defconfig
@ -10,4 +10,3 @@ CONFIG_SERIAL=y
				@@ -10,4 +10,3 @@ CONFIG_SERIAL=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/mimxrt1020_evk/mimxrt1020_evk_defconfig
+++ b/boards/nxp/mimxrt1020_evk/mimxrt1020_evk_defconfig
@ -10,4 +10,3 @@ CONFIG_SERIAL=y
				@@ -10,4 +10,3 @@ CONFIG_SERIAL=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/mimxrt1024_evk/mimxrt1024_evk_defconfig
+++ b/boards/nxp/mimxrt1024_evk/mimxrt1024_evk_defconfig
@ -10,4 +10,3 @@ CONFIG_SERIAL=y
				@@ -10,4 +10,3 @@ CONFIG_SERIAL=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/mimxrt1040_evk/mimxrt1040_evk_defconfig
+++ b/boards/nxp/mimxrt1040_evk/mimxrt1040_evk_defconfig
@ -10,4 +10,3 @@ CONFIG_SERIAL=y
				@@ -10,4 +10,3 @@ CONFIG_SERIAL=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/mimxrt1050_evk/mimxrt1050_evk_defconfig
+++ b/boards/nxp/mimxrt1050_evk/mimxrt1050_evk_defconfig
@ -10,4 +10,3 @@ CONFIG_SERIAL=y
				@@ -10,4 +10,3 @@ CONFIG_SERIAL=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/mimxrt1060_evk/mimxrt1060_evk_defconfig
+++ b/boards/nxp/mimxrt1060_evk/mimxrt1060_evk_defconfig
@ -10,4 +10,3 @@ CONFIG_SERIAL=y
				@@ -10,4 +10,3 @@ CONFIG_SERIAL=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/mimxrt1060_evk/mimxrt1060_evkb_defconfig
+++ b/boards/nxp/mimxrt1060_evk/mimxrt1060_evkb_defconfig
@ -10,4 +10,3 @@ CONFIG_SERIAL=y
				@@ -10,4 +10,3 @@ CONFIG_SERIAL=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/mimxrt1062_fmurt6/mimxrt1062_fmurt6_defconfig
+++ b/boards/nxp/mimxrt1062_fmurt6/mimxrt1062_fmurt6_defconfig
@ -10,7 +10,6 @@ CONFIG_SERIAL=y
				@@ -10,7 +10,6 @@ CONFIG_SERIAL=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
-CONFIG_PINCTRL=y

 # Enable Regulators
 CONFIG_REGULATOR=y
--- a/boards/nxp/mimxrt1064_evk/mimxrt1064_evk_defconfig
+++ b/boards/nxp/mimxrt1064_evk/mimxrt1064_evk_defconfig
@ -10,4 +10,3 @@ CONFIG_SERIAL=y
				@@ -10,4 +10,3 @@ CONFIG_SERIAL=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/mimxrt1160_evk/mimxrt1160_evk_mimxrt1166_cm4_defconfig
+++ b/boards/nxp/mimxrt1160_evk/mimxrt1160_evk_mimxrt1166_cm4_defconfig
@ -10,4 +10,3 @@ CONFIG_SERIAL=y
				@@ -10,4 +10,3 @@ CONFIG_SERIAL=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/mimxrt1160_evk/mimxrt1160_evk_mimxrt1166_cm7_defconfig
+++ b/boards/nxp/mimxrt1160_evk/mimxrt1160_evk_mimxrt1166_cm7_defconfig
@ -11,4 +11,3 @@ CONFIG_GPIO=y
				@@ -11,4 +11,3 @@ CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
 CONFIG_FLEXSPI_CONFIG_BLOCK_OFFSET=0x400
-CONFIG_PINCTRL=y
--- a/boards/nxp/mimxrt1170_evk/mimxrt1170_evk_mimxrt1176_cm4_defconfig
+++ b/boards/nxp/mimxrt1170_evk/mimxrt1170_evk_mimxrt1176_cm4_defconfig
@ -10,4 +10,3 @@ CONFIG_SERIAL=y
				@@ -10,4 +10,3 @@ CONFIG_SERIAL=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/mimxrt1170_evk/mimxrt1170_evk_mimxrt1176_cm7_defconfig
+++ b/boards/nxp/mimxrt1170_evk/mimxrt1170_evk_mimxrt1176_cm7_defconfig
@ -10,4 +10,3 @@ CONFIG_SERIAL=y
				@@ -10,4 +10,3 @@ CONFIG_SERIAL=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
-CONFIG_PINCTRL=y
--- a/boards/nxp/mimxrt1180_evk/mimxrt1180_evk_mimxrt1189_cm33_defconfig
+++ b/boards/nxp/mimxrt1180_evk/mimxrt1180_evk_mimxrt1189_cm33_defconfig
@ -10,6 +10,5 @@ CONFIG_SERIAL=y
				@@ -10,6 +10,5 @@ CONFIG_SERIAL=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
-CONFIG_PINCTRL=y
 # Enable TrustZone-M
 CONFIG_TRUSTED_EXECUTION_SECURE=y
--- a/boards/nxp/mimxrt1180_evk/mimxrt1180_evk_mimxrt1189_cm7_defconfig
+++ b/boards/nxp/mimxrt1180_evk/mimxrt1180_evk_mimxrt1189_cm7_defconfig
@ -10,5 +10,4 @@ CONFIG_SERIAL=y
				@@ -10,5 +10,4 @@ CONFIG_SERIAL=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
-CONFIG_PINCTRL=y
 CONFIG_NXP_IMXRT_BOOT_HEADER=n
--- a/boards/nxp/mimxrt595_evk/mimxrt595_evk_mimxrt595s_cm33_defconfig
+++ b/boards/nxp/mimxrt595_evk/mimxrt595_evk_mimxrt595s_cm33_defconfig
@ -7,7 +7,6 @@
				@@ -7,7 +7,6 @@
 CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
-CONFIG_PINCTRL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_GPIO=y
 # Enable TrustZone-M
--- a/boards/nxp/mimxrt685_evk/mimxrt685_evk_mimxrt685s_cm33_defconfig
+++ b/boards/nxp/mimxrt685_evk/mimxrt685_evk_mimxrt685s_cm33_defconfig
@ -7,7 +7,6 @@
				@@ -7,7 +7,6 @@
 CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
-CONFIG_PINCTRL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_GPIO=y
 # Enable TrustZone-M
--- a/boards/nxp/mr_canhubk3/mr_canhubk3_defconfig
+++ b/boards/nxp/mr_canhubk3/mr_canhubk3_defconfig
@ -16,7 +16,6 @@ CONFIG_ARM_MPU=y
				@@ -16,7 +16,6 @@ CONFIG_ARM_MPU=y
 CONFIG_NOCACHE_MEMORY=y

 # Drivers
-CONFIG_PINCTRL=y
 CONFIG_SERIAL=y
 CONFIG_WATCHDOG=y

--- a/boards/nxp/rd_rw612_bga/rd_rw612_bga_defconfig
+++ b/boards/nxp/rd_rw612_bga/rd_rw612_bga_defconfig
@ -7,7 +7,6 @@
				@@ -7,7 +7,6 @@
 CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
-CONFIG_PINCTRL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
--- a/boards/nxp/rd_rw612_bga/rd_rw612_bga_rw612_ethernet_defconfig
+++ b/boards/nxp/rd_rw612_bga/rd_rw612_bga_rw612_ethernet_defconfig
@ -7,7 +7,6 @@
				@@ -7,7 +7,6 @@
 CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
-CONFIG_PINCTRL=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
 CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
--- a/boards/nxp/rddrone_fmuk66/rddrone_fmuk66_defconfig
+++ b/boards/nxp/rddrone_fmuk66/rddrone_fmuk66_defconfig
@ -4,7 +4,6 @@ CONFIG_CONSOLE=y
				@@ -4,7 +4,6 @@ CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=160000000
 CONFIG_OSC_EXTERNAL=y

--- a/boards/nxp/s32z2xxdc2/s32z2xxdc2_s32z270_rtu0_defconfig
+++ b/boards/nxp/s32z2xxdc2/s32z2xxdc2_s32z270_rtu0_defconfig
@ -6,6 +6,5 @@ CONFIG_ISR_STACK_SIZE=512
				@@ -6,6 +6,5 @@ CONFIG_ISR_STACK_SIZE=512
 CONFIG_SYS_CLOCK_TICKS_PER_SEC=1000
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=8000000
 CONFIG_ARM_MPU=y
-CONFIG_PINCTRL=y
 CONFIG_SERIAL=y
 CONFIG_CONSOLE=y
--- a/boards/nxp/s32z2xxdc2/s32z2xxdc2_s32z270_rtu1_defconfig
+++ b/boards/nxp/s32z2xxdc2/s32z2xxdc2_s32z270_rtu1_defconfig
@ -6,6 +6,5 @@ CONFIG_ISR_STACK_SIZE=512
				@@ -6,6 +6,5 @@ CONFIG_ISR_STACK_SIZE=512
 CONFIG_SYS_CLOCK_TICKS_PER_SEC=1000
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=8000000
 CONFIG_ARM_MPU=y
-CONFIG_PINCTRL=y
 CONFIG_SERIAL=y
 CONFIG_CONSOLE=y
--- a/boards/nxp/twr_ke18f/Kconfig
+++ b/boards/nxp/twr_ke18f/Kconfig
@ -7,6 +7,7 @@ if BOARD_TWR_KE18F
				@@ -7,6 +7,7 @@ if BOARD_TWR_KE18F

 config BOARD_TWR_KE18F_FLEXIO_CLKOUT
 	bool "CLKOUT signal on FlexIO header"
+	select PINCTRL
 	help
 	  Enable the CLKOUT signal on FlexIO header pin 7 (PTE10).

--- a/boards/nxp/twr_ke18f/twr_ke18f_defconfig
+++ b/boards/nxp/twr_ke18f/twr_ke18f_defconfig
@ -4,7 +4,6 @@ CONFIG_SERIAL=y
				@@ -4,7 +4,6 @@ CONFIG_SERIAL=y
 CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
-CONFIG_PINCTRL=y
 CONFIG_GPIO=y

 # Enable MPU
--- a/boards/nxp/twr_kv58f220m/twr_kv58f220m_defconfig
+++ b/boards/nxp/twr_kv58f220m/twr_kv58f220m_defconfig
@ -4,7 +4,6 @@ CONFIG_SERIAL=y
				@@ -4,7 +4,6 @@ CONFIG_SERIAL=y
 CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=y
 CONFIG_UART_INTERRUPT_DRIVEN=y
-CONFIG_PINCTRL=y
 CONFIG_GPIO=y
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=237500000

--- a/boards/nxp/ucans32k1sic/ucans32k1sic_defconfig
+++ b/boards/nxp/ucans32k1sic/ucans32k1sic_defconfig
@ -9,6 +9,5 @@ CONFIG_XIP=y
				@@ -9,6 +9,5 @@ CONFIG_XIP=y
 # Enable MPU
 CONFIG_ARM_MPU=y

-CONFIG_PINCTRL=y
 CONFIG_SERIAL=y
 CONFIG_CONSOLE=y
--- a/boards/nxp/usb_kw24d512/usb_kw24d512_defconfig
+++ b/boards/nxp/usb_kw24d512/usb_kw24d512_defconfig
@ -5,6 +5,5 @@ CONFIG_RTT_CONSOLE=y
				@@ -5,6 +5,5 @@ CONFIG_RTT_CONSOLE=y
 CONFIG_USE_SEGGER_RTT=y
 CONFIG_SERIAL=y
 CONFIG_GPIO=y
-CONFIG_PINCTRL=y
 CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=48000000
 CONFIG_OSC_EXTERNAL=y
--- a/boards/nxp/vmu_rt1170/vmu_rt1170_mimxrt1176_cm7_defconfig
+++ b/boards/nxp/vmu_rt1170/vmu_rt1170_mimxrt1176_cm7_defconfig
@ -12,7 +12,6 @@ CONFIG_GPIO=y
				@@ -12,7 +12,6 @@ CONFIG_GPIO=y
 CONFIG_ARM_MPU=y
 CONFIG_HW_STACK_PROTECTION=y
 CONFIG_FLEXSPI_CONFIG_BLOCK_OFFSET=0x400
-CONFIG_PINCTRL=y

 # Enable Regulators
 CONFIG_REGULATOR=y
--- a/drivers/adc/Kconfig.mcux
+++ b/drivers/adc/Kconfig.mcux
@ -22,6 +22,7 @@ config ADC_MCUX_ADC16
				@@ -22,6 +22,7 @@ config ADC_MCUX_ADC16
 config ADC_MCUX_12B1MSPS_SAR
 	bool "MCUX 12B1MSPS SAR ADC driver"
 	default y
+	select PINCTRL
 	depends on DT_HAS_NXP_MCUX_12B1MSPS_SAR_ENABLED
 	help
 	  Enable the MCUX 12B1MSPS SAR ADC driver.
@ -31,6 +32,7 @@ config ADC_MCUX_LPADC
				@@ -31,6 +32,7 @@ config ADC_MCUX_LPADC
 	default y
 	select ADC_CONFIGURABLE_INPUTS
 	select REGULATOR
+	select PINCTRL
 	depends on DT_HAS_NXP_LPC_LPADC_ENABLED
 	help
 	  Enable the MCUX LPADC driver.
--- a/drivers/adc/Kconfig.nxp_s32
+++ b/drivers/adc/Kconfig.nxp_s32
@ -4,6 +4,7 @@
				@@ -4,6 +4,7 @@
 config ADC_NXP_S32_ADC_SAR
 	bool "NXP S32 ADC SAR driver"
 	default y
+	select PINCTRL
 	depends on DT_HAS_NXP_S32_ADC_SAR_ENABLED
 	help
 	  This option enables the NXP S32 ADC SAR driver.
--- a/drivers/audio/Kconfig.dmic_mcux
+++ b/drivers/audio/Kconfig.dmic_mcux
@ -6,6 +6,7 @@ config AUDIO_DMIC_MCUX
				@@ -6,6 +6,7 @@ config AUDIO_DMIC_MCUX
 	default y
 	depends on DT_HAS_NXP_DMIC_ENABLED
 	select DMA
+	select PINCTRL
 	help
 	  Enable support for DMIC on NXP MCUX SoC's

--- a/drivers/can/Kconfig.nxp_s32
+++ b/drivers/can/Kconfig.nxp_s32
@ -6,6 +6,7 @@ config CAN_NXP_S32_CANXL
				@@ -6,6 +6,7 @@ config CAN_NXP_S32_CANXL
 	default y
 	depends on DT_HAS_NXP_S32_CANXL_ENABLED
 	select CLOCK_CONTROL
+	select PINCTRL
 	help
 	  Enable support for NXP S32 CANXL driver.

--- a/drivers/clock_control/Kconfig.lpc11u6x
+++ b/drivers/clock_control/Kconfig.lpc11u6x
@ -7,6 +7,7 @@ menuconfig CLOCK_CONTROL_LPC11U6X
				@@ -7,6 +7,7 @@ menuconfig CLOCK_CONTROL_LPC11U6X
 	bool "LPC11U6X Reset and clock control"
 	default y
 	depends on DT_HAS_NXP_LPC11U6X_SYSCON_ENABLED
+	select PINCTRL
 	help
 	  Enable driver for reset and clock control used in
 	  LPC11U6X MCUs
--- a/drivers/clock_control/Kconfig.mcux_syscon
+++ b/drivers/clock_control/Kconfig.mcux_syscon
@ -7,5 +7,6 @@ config CLOCK_CONTROL_MCUX_SYSCON
				@@ -7,5 +7,6 @@ config CLOCK_CONTROL_MCUX_SYSCON
 	bool "MCUX LPC clock driver"
 	default y
 	depends on DT_HAS_NXP_LPC_SYSCON_ENABLED
+	select PINCTRL
 	help
 	  Enable support for mcux clock driver.
--- a/drivers/display/Kconfig.mcux_elcdif
+++ b/drivers/display/Kconfig.mcux_elcdif
@ -7,6 +7,7 @@ menuconfig DISPLAY_MCUX_ELCDIF
				@@ -7,6 +7,7 @@ menuconfig DISPLAY_MCUX_ELCDIF
 	bool "MCUX eLCDIF driver"
 	default y
 	depends on DT_HAS_NXP_IMX_ELCDIF_ENABLED
+	select PINCTRL
 	help
 	  Enable support for mcux eLCDIF driver.

--- a/drivers/ethernet/Kconfig.nxp_s32_netc
+++ b/drivers/ethernet/Kconfig.nxp_s32_netc
@ -6,6 +6,7 @@ menuconfig ETH_NXP_S32_NETC
				@@ -6,6 +6,7 @@ menuconfig ETH_NXP_S32_NETC
 	default y
 	depends on (DT_HAS_NXP_S32_NETC_PSI_ENABLED || DT_HAS_NXP_S32_NETC_VSI_ENABLED)
 	select MBOX
+	select PINCTRL
 	select MDIO if DT_HAS_NXP_S32_NETC_PSI_ENABLED
 	select NOCACHE_MEMORY if ARCH_HAS_NOCACHE_MEMORY_SUPPORT
 	help
--- a/drivers/ethernet/eth_nxp_enet_qos/Kconfig
+++ b/drivers/ethernet/eth_nxp_enet_qos/Kconfig
@ -5,6 +5,7 @@ menuconfig ETH_NXP_ENET_QOS
				@@ -5,6 +5,7 @@ menuconfig ETH_NXP_ENET_QOS
 	bool "NXP ENET QOS Ethernet Module Driver"
 	default y
 	depends on DT_HAS_NXP_ENET_QOS_ENABLED
+	select PINCTRL
 	select MDIO if DT_HAS_NXP_ENET_QOS_MDIO_ENABLED
 	help
 	  Enable NXP ENET Ethernet Module Driver. This driver
--- a/drivers/ethernet/nxp_enet/Kconfig
+++ b/drivers/ethernet/nxp_enet/Kconfig
@ -19,6 +19,7 @@ config ETH_NXP_ENET
				@@ -19,6 +19,7 @@ config ETH_NXP_ENET
 	select MDIO if DT_HAS_NXP_ENET_MDIO_ENABLED
 	select NET_POWER_MANAGEMENT if (PM_DEVICE && SOC_FAMILY_KINETIS)
 	select ETH_DSA_SUPPORT
+	select PINCTRL
 	help
 	  Enable NXP ENET Ethernet driver.

@ -29,6 +30,7 @@ config ETH_MCUX
				@@ -29,6 +30,7 @@ config ETH_MCUX
 	select NET_POWER_MANAGEMENT if PM_DEVICE
 	select ETH_DSA_SUPPORT
 	select DEPRECATED
+	select PINCTRL
 	help
 	  Enable deprecated legacy MCUX Ethernet driver.
 	  Note, this driver performs one shot PHY setup.
--- a/drivers/firmware/scmi/Kconfig
+++ b/drivers/firmware/scmi/Kconfig
@ -24,6 +24,7 @@ config ARM_SCMI_PINCTRL_HELPERS
				@@ -24,6 +24,7 @@ config ARM_SCMI_PINCTRL_HELPERS
 	bool "Helper functions for SCMI pinctrl protocol"
 	default y
 	depends on DT_HAS_ARM_SCMI_PINCTRL_ENABLED
+	select PINCTRL
 	help
 	  Enable support for SCMI pinctrl protocol helper functions.

--- a/drivers/gpio/Kconfig.mcux_lpc
+++ b/drivers/gpio/Kconfig.mcux_lpc
@ -7,5 +7,6 @@ config GPIO_MCUX_LPC
				@@ -7,5 +7,6 @@ config GPIO_MCUX_LPC
 	bool "MCUX LPC GPIO driver"
 	default y
 	depends on DT_HAS_NXP_LPC_GPIO_PORT_ENABLED
+	select PINCTRL
 	help
 	  Enable the MCUX LPC pinmux driver.
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@ -201,6 +201,7 @@ config I2C_IMX
				@@ -201,6 +201,7 @@ config I2C_IMX
 	bool "i.MX I2C driver"
 	default y
 	depends on DT_HAS_FSL_IMX21_I2C_ENABLED
+	select PINCTRL
 	help
 	  Enable the i.MX I2C driver.

--- a/drivers/i2c/Kconfig.lpc11u6x
+++ b/drivers/i2c/Kconfig.lpc11u6x
@ -5,5 +5,6 @@ config I2C_LPC11U6X
				@@ -5,5 +5,6 @@ config I2C_LPC11U6X
 	bool "LPC11U6X I2C driver"
 	default y
 	depends on DT_HAS_NXP_LPC11U6X_I2C_ENABLED
+	select PINCTRL
 	help
 	  Enable I2C support on the LPC11U6X SoCs
--- a/drivers/i2s/Kconfig.mcux_flexcomm
+++ b/drivers/i2s/Kconfig.mcux_flexcomm
@ -6,6 +6,7 @@ config I2S_MCUX_FLEXCOMM
				@@ -6,6 +6,7 @@ config I2S_MCUX_FLEXCOMM
 	default y
 	depends on DT_HAS_NXP_LPC_I2S_ENABLED
 	select DMA
+	select PINCTRL
 	help
 	  Enable support for mcux flexcomm i2s driver.

--- a/drivers/interrupt_controller/Kconfig.nxp_s32
+++ b/drivers/interrupt_controller/Kconfig.nxp_s32
@ -8,6 +8,7 @@ config NXP_S32_EIRQ
				@@ -8,6 +8,7 @@ config NXP_S32_EIRQ
 	default y
 	depends on DT_HAS_NXP_S32_SIUL2_EIRQ_ENABLED
 	select NOCACHE_MEMORY if ARCH_HAS_NOCACHE_MEMORY_SUPPORT
+	select PINCTRL
 	help
 	  External interrupt controller driver for NXP S32 MCUs

--- a/drivers/mdio/Kconfig.nxp_enet
+++ b/drivers/mdio/Kconfig.nxp_enet
@ -5,6 +5,7 @@ config MDIO_NXP_ENET
				@@ -5,6 +5,7 @@ config MDIO_NXP_ENET
 	bool "NXP ENET MDIO Driver"
 	default y
 	depends on DT_HAS_NXP_ENET_MDIO_ENABLED
+	select PINCTRL
 	help
 	  Enable NXP ENET MDIO Driver. This Kconfig can be disabled manually
 	  if all ethernet PHYs being used with ENET are not managed by MDIO bus.
--- a/drivers/mdio/Kconfig.nxp_s32_gmac
+++ b/drivers/mdio/Kconfig.nxp_s32_gmac
@ -7,6 +7,7 @@ menuconfig MDIO_NXP_S32_GMAC
				@@ -7,6 +7,7 @@ menuconfig MDIO_NXP_S32_GMAC
 	depends on DT_HAS_NXP_S32_GMAC_MDIO_ENABLED
 	select CLOCK_CONTROL
 	select NOCACHE_MEMORY if ARCH_HAS_NOCACHE_MEMORY_SUPPORT
+	select PINCTRL
 	help
 	  Enable GMAC MDIO driver for NXP S32 SoCs.

--- a/drivers/mdio/Kconfig.nxp_s32_netc
+++ b/drivers/mdio/Kconfig.nxp_s32_netc
@ -7,5 +7,6 @@ config MDIO_NXP_S32_NETC
				@@ -7,5 +7,6 @@ config MDIO_NXP_S32_NETC
 	depends on DT_HAS_NXP_S32_NETC_EMDIO_ENABLED
 	depends on ETH_NXP_S32_NETC && DT_HAS_NXP_S32_NETC_PSI_ENABLED
 	select NOCACHE_MEMORY if ARCH_HAS_NOCACHE_MEMORY_SUPPORT
+	select PINCTRL
 	help
 	  Enable NETC External MDIO Controller driver for NXP S32 SoCs.
--- a/drivers/mipi_dbi/Kconfig.nxp_flexio_lcdif
+++ b/drivers/mipi_dbi/Kconfig.nxp_flexio_lcdif
@ -8,5 +8,6 @@ config MIPI_DBI_NXP_FLEXIO_LCDIF
				@@ -8,5 +8,6 @@ config MIPI_DBI_NXP_FLEXIO_LCDIF
 	depends on CLOCK_CONTROL
 	select MCUX_FLEXIO
 	select DMA
+	select PINCTRL
 	help
 	  Enable support for MIPI DBI driver for NXP FlexIO based LCDIF controller.
--- a/drivers/ptp_clock/Kconfig.nxp_enet
+++ b/drivers/ptp_clock/Kconfig.nxp_enet
@ -6,5 +6,6 @@ config PTP_CLOCK_NXP_ENET
				@@ -6,5 +6,6 @@ config PTP_CLOCK_NXP_ENET
 	default y
 	depends on DT_HAS_NXP_ENET_PTP_CLOCK_ENABLED && NET_L2_PTP
 	depends on ETH_NXP_ENET
+	select PINCTRL
 	help
 	  Enable NXP ENET PTP clock support.
--- a/drivers/pwm/Kconfig.imx
+++ b/drivers/pwm/Kconfig.imx
@ -7,6 +7,7 @@ menuconfig PWM_IMX
				@@ -7,6 +7,7 @@ menuconfig PWM_IMX
 	bool "i.MX PWM Driver"
 	default y
 	depends on DT_HAS_FSL_IMX27_PWM_ENABLED
+	select PINCTRL
 	help
 	  Enable support for i.MX pwm driver.

--- a/drivers/pwm/Kconfig.mcux
+++ b/drivers/pwm/Kconfig.mcux
@ -7,5 +7,6 @@ config PWM_MCUX
				@@ -7,5 +7,6 @@ config PWM_MCUX
 	bool "MCUX PWM driver"
 	default y
 	depends on DT_HAS_NXP_IMX_PWM_ENABLED
+	select PINCTRL
 	help
 	  Enable mcux pwm driver.
--- a/drivers/pwm/Kconfig.mcux_ctimer
+++ b/drivers/pwm/Kconfig.mcux_ctimer
@ -5,5 +5,6 @@ config PWM_MCUX_CTIMER
				@@ -5,5 +5,6 @@ config PWM_MCUX_CTIMER
 	bool "MCUX CTimer PWM driver"
 	default y
 	depends on DT_HAS_NXP_CTIMER_PWM_ENABLED
+	select PINCTRL
 	help
 	  Enable ctimer based pwm driver.
--- a/drivers/pwm/Kconfig.mcux_qtmr
+++ b/drivers/pwm/Kconfig.mcux_qtmr
@ -5,6 +5,7 @@ config PWM_MCUX_QTMR
				@@ -5,6 +5,7 @@ config PWM_MCUX_QTMR
 	bool "MCUX QMTR PWM driver"
 	default y
 	depends on DT_HAS_NXP_QTMR_PWM_ENABLED
-	depends on CLOCK_CONTROL && PINCTRL
+	depends on CLOCK_CONTROL
+	select PINCTRL
 	help
 	  Enable QTMR based pwm driver.
--- a/drivers/pwm/Kconfig.mcux_sctimer
+++ b/drivers/pwm/Kconfig.mcux_sctimer
@ -5,6 +5,7 @@ config PWM_MCUX_SCTIMER
				@@ -5,6 +5,7 @@ config PWM_MCUX_SCTIMER
 	bool "MCUX SCTimer PWM driver"
 	default y
 	depends on DT_HAS_NXP_SCTIMER_PWM_ENABLED
-	depends on CLOCK_CONTROL && PINCTRL
+	depends on CLOCK_CONTROL
+	select PINCTRL
 	help
 	  Enable sctimer based pwm driver.
--- a/drivers/pwm/Kconfig.nxp_flexio
+++ b/drivers/pwm/Kconfig.nxp_flexio
@ -8,5 +8,6 @@ config PWM_NXP_FLEXIO
				@@ -8,5 +8,6 @@ config PWM_NXP_FLEXIO
 	depends on CLOCK_CONTROL
 	depends on DT_HAS_NXP_FLEXIO_PWM_ENABLED
 	select MCUX_FLEXIO
+	select PINCTRL
 	help
 	  Enable flexio based pwm driver.
--- a/drivers/pwm/Kconfig.nxp_s32_emios
+++ b/drivers/pwm/Kconfig.nxp_s32_emios
@ -7,5 +7,6 @@ config PWM_NXP_S32_EMIOS
				@@ -7,5 +7,6 @@ config PWM_NXP_S32_EMIOS
 	depends on DT_HAS_NXP_S32_EMIOS_PWM_ENABLED
 	select NXP_S32_EMIOS
 	select NOCACHE_MEMORY if ARCH_HAS_NOCACHE_MEMORY_SUPPORT
+	select PINCTRL
 	help
 	  Enable support for the NXP S32 PWM-eMIOS.
--- a/drivers/sensor/nxp/qdec_nxp_s32/Kconfig
+++ b/drivers/sensor/nxp/qdec_nxp_s32/Kconfig
@ -6,5 +6,6 @@ config QDEC_NXP_S32
				@@ -6,5 +6,6 @@ config QDEC_NXP_S32
 	default y
 	depends on DT_HAS_NXP_QDEC_S32_ENABLED
 	select NXP_S32_EMIOS
+	select PINCTRL
 	help
 	  Enable drivers for NXP S32 QUADRATURE DECODER
--- a/drivers/serial/Kconfig.imx
+++ b/drivers/serial/Kconfig.imx
@ -7,6 +7,7 @@ config UART_IMX
				@@ -7,6 +7,7 @@ config UART_IMX
 	bool "NXP i.MX7 family processor UART driver"
 	default y
 	depends on DT_HAS_NXP_IMX_UART_ENABLED
+	select PINCTRL
 	select SERIAL_HAS_DRIVER
 	select SERIAL_SUPPORT_INTERRUPT
 	help
--- a/drivers/serial/Kconfig.lpc11u6x
+++ b/drivers/serial/Kconfig.lpc11u6x
@ -9,5 +9,6 @@ config UART_LPC11U6X
				@@ -9,5 +9,6 @@ config UART_LPC11U6X
 	depends on DT_HAS_NXP_LPC11U6X_UART_ENABLED
 	select SERIAL_HAS_DRIVER
 	select SERIAL_SUPPORT_INTERRUPT
+	select PINCTRL
 	help
 	  Enable UART driver for LPC11U6X series
--- a/drivers/serial/Kconfig.mcux_iuart
+++ b/drivers/serial/Kconfig.mcux_iuart
@ -8,6 +8,7 @@ config UART_MCUX_IUART
				@@ -8,6 +8,7 @@ config UART_MCUX_IUART
 	default y
 	depends on DT_HAS_NXP_IMX_IUART_ENABLED
 	depends on CLOCK_CONTROL
+	select PINCTRL
 	select SERIAL_HAS_DRIVER
 	select SERIAL_SUPPORT_INTERRUPT
 	help
--- a/drivers/serial/Kconfig.mcux_lpsci
+++ b/drivers/serial/Kconfig.mcux_lpsci
@ -10,5 +10,6 @@ config UART_MCUX_LPSCI
				@@ -10,5 +10,6 @@ config UART_MCUX_LPSCI
 	depends on CLOCK_CONTROL
 	select SERIAL_HAS_DRIVER
 	select SERIAL_SUPPORT_INTERRUPT
+	select PINCTRL
 	help
 	  Enable the MCUX LPSCI driver.
--- a/Show More
+++ b/Show More