boards: doc: adopt zephyr:board-supported-runners directive

Add .. zephyr:board-supported-runners:: to the Programming and Debugging section of the documentation for each board that has one such section, as this is the most natural place to put it. Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
3 months ago · de13103f0b
572 changed files with 1160 additions and 10 deletions
--- a/boards/01space/esp32c3_042_oled/doc/index.rst
+++ b/boards/01space/esp32c3_042_oled/doc/index.rst
@ -67,6 +67,8 @@ retrieve those files.
				@@ -67,6 +67,8 @@ retrieve those files.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Standalone application
 ======================

--- a/boards/adafruit/feather_esp32s2/doc/adafruit_feather_esp32s2.rst
+++ b/boards/adafruit/feather_esp32s2/doc/adafruit_feather_esp32s2.rst
@ -61,6 +61,8 @@ pinouts and the schematic.
				@@ -61,6 +61,8 @@ pinouts and the schematic.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Prerequisites
 =============

--- a/boards/adafruit/feather_esp32s2/doc/adafruit_feather_esp32s2_tft.rst
+++ b/boards/adafruit/feather_esp32s2/doc/adafruit_feather_esp32s2_tft.rst
@ -54,6 +54,8 @@ pinouts and the schematic.
				@@ -54,6 +54,8 @@ pinouts and the schematic.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Prerequisites
 =============

--- a/boards/adafruit/feather_esp32s2/doc/adafruit_feather_esp32s2_tft_reverse.rst
+++ b/boards/adafruit/feather_esp32s2/doc/adafruit_feather_esp32s2_tft_reverse.rst
@ -48,6 +48,8 @@ including pinouts and the schematic.
				@@ -48,6 +48,8 @@ including pinouts and the schematic.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Prerequisites
 =============

--- a/boards/adafruit/feather_esp32s3/doc/index.rst
+++ b/boards/adafruit/feather_esp32s3/doc/index.rst
@ -86,6 +86,8 @@ board including `pinouts`_ and the `schematic`_.
				@@ -86,6 +86,8 @@ board including `pinouts`_ and the `schematic`_.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Prerequisites
 =============

--- a/boards/adafruit/feather_esp32s3_tft/doc/index.rst
+++ b/boards/adafruit/feather_esp32s3_tft/doc/index.rst
@ -89,6 +89,8 @@ the board including `pinouts`_ and the `schematic`_.
				@@ -89,6 +89,8 @@ the board including `pinouts`_ and the `schematic`_.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Prerequisites
 =============

--- a/boards/adafruit/feather_m0_basic_proto/doc/index.rst
+++ b/boards/adafruit/feather_m0_basic_proto/doc/index.rst
@ -68,6 +68,8 @@ serial port that echos characters back to the host PC.
				@@ -68,6 +68,8 @@ serial port that echos characters back to the host PC.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The Adafruit Feather M0 Basic Proto ships with a BOSSA compatible
 SAM-BA bootloader.  The bootloader can be entered by quickly tapping
 the reset button twice.
--- a/boards/adafruit/feather_m0_lora/doc/index.rst
+++ b/boards/adafruit/feather_m0_lora/doc/index.rst
@ -75,6 +75,8 @@ version, 433MHz or 900MHz is supported.
				@@ -75,6 +75,8 @@ version, 433MHz or 900MHz is supported.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The Adafruit Feather M0 with LoRa ships with a BOSSA compatible
 SAM-BA bootloader.  The bootloader can be entered by quickly tapping
 the reset button twice.
--- a/boards/adafruit/feather_m4_express/doc/index.rst
+++ b/boards/adafruit/feather_m4_express/doc/index.rst
@ -73,6 +73,8 @@ serial port that echos characters back to the host PC.
				@@ -73,6 +73,8 @@ serial port that echos characters back to the host PC.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The Feather ships with a the BOSSA compatible UF2 bootloader.  The
 bootloader can be entered by quickly tapping the reset button twice.

--- a/boards/adafruit/feather_nrf52840/doc/index.rst
+++ b/boards/adafruit/feather_nrf52840/doc/index.rst
@ -93,6 +93,8 @@ Push buttons
				@@ -93,6 +93,8 @@ Push buttons
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adafruit/feather_stm32f405/doc/index.rst
+++ b/boards/adafruit/feather_stm32f405/doc/index.rst
@ -64,6 +64,8 @@ dedicated to the 2 MB SPI Flash chip.
				@@ -64,6 +64,8 @@ dedicated to the 2 MB SPI Flash chip.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 DFU-Util programming is supported through Zephyr by default. Set up
 of the built in DFU-Util bootloader is possible by following the
 `instructions on the Learn website`_.
--- a/boards/adafruit/grand_central_m4_express/doc/index.rst
+++ b/boards/adafruit/grand_central_m4_express/doc/index.rst
@ -65,6 +65,8 @@ serial port that echos characters back to the host PC.
				@@ -65,6 +65,8 @@ serial port that echos characters back to the host PC.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The Grand Central ships with a BOSSA compatible UF2 bootloader.
 The bootloader can be entered by quickly tapping the reset button twice.

--- a/boards/adafruit/itsybitsy/doc/index.rst
+++ b/boards/adafruit/itsybitsy/doc/index.rst
@ -86,6 +86,9 @@ your board. The button and LED definitions can be found in
				@@ -86,6 +86,9 @@ your board. The button and LED definitions can be found in

 Programming and Debugging
 *************************
+
+.. zephyr:board-supported-runners::
+
 The ItsyBitsy ships with the BOSSA compatible UF2 bootloader.  The
 bootloader can be entered by quickly tapping the reset button twice.

--- a/boards/adafruit/itsybitsy_m4_express/doc/index.rst
+++ b/boards/adafruit/itsybitsy_m4_express/doc/index.rst
@ -72,6 +72,8 @@ serial port that echos characters back to the host PC.
				@@ -72,6 +72,8 @@ serial port that echos characters back to the host PC.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The ItsyBitsy ships with a the BOSSA compatible UF2 bootloader.  The
 bootloader can be entered by quickly tapping the reset button twice.

--- a/boards/adafruit/kb2040/doc/index.rst
+++ b/boards/adafruit/kb2040/doc/index.rst
@ -52,6 +52,8 @@ Default Zephyr Peripheral Mapping:
				@@ -52,6 +52,8 @@ Default Zephyr Peripheral Mapping:
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adafruit/macropad_rp2040/doc/index.rst
+++ b/boards/adafruit/macropad_rp2040/doc/index.rst
@ -35,6 +35,8 @@ Supported Features
				@@ -35,6 +35,8 @@ Supported Features
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Applications for the ``adafruit_macropad_rp2040`` board target can be built and
 flashed in the usual way (see :ref:`build_an_application` and
 :ref:`application_run` for more details).
--- a/boards/adafruit/nrf52_adafruit_feather/doc/index.rst
+++ b/boards/adafruit/nrf52_adafruit_feather/doc/index.rst
@ -58,6 +58,8 @@ Push buttons
				@@ -58,6 +58,8 @@ Push buttons
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The ``nrf52_adafruit_feather`` board is available in two different versions:

 - `Adafruit Feather nRF52 Pro with myNewt Bootloader`_
--- a/boards/adafruit/qt_py_esp32s3/doc/index.rst
+++ b/boards/adafruit/qt_py_esp32s3/doc/index.rst
@ -51,6 +51,8 @@ command below to retrieve those files.
				@@ -51,6 +51,8 @@ command below to retrieve those files.
 Building & Flashing
 *******************

+.. zephyr:board-supported-runners::
+
 Simple boot
 ===========

--- a/boards/adafruit/qt_py_rp2040/doc/index.rst
+++ b/boards/adafruit/qt_py_rp2040/doc/index.rst
@ -54,6 +54,8 @@ Default Zephyr Peripheral Mapping:
				@@ -54,6 +54,8 @@ Default Zephyr Peripheral Mapping:
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adafruit/trinket_m0/doc/index.rst
+++ b/boards/adafruit/trinket_m0/doc/index.rst
@ -70,6 +70,8 @@ serial port that echos characters back to the host PC.
				@@ -70,6 +70,8 @@ serial port that echos characters back to the host PC.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The Trinket M0 ships the BOSSA compatible UF2 bootloader.  The
 bootloader can be entered by quickly tapping the reset button twice.

--- a/boards/adi/ad_swiot1l_sl/doc/index.rst
+++ b/boards/adi/ad_swiot1l_sl/doc/index.rst
@ -74,6 +74,8 @@ Supported Features
				@@ -74,6 +74,8 @@ Supported Features
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========
 The MAX32650 MCU can be flashed by connecting an external debug probe to the
--- a/boards/adi/apard32690/doc/index.rst
+++ b/boards/adi/apard32690/doc/index.rst
@ -157,6 +157,8 @@ Connections and IOs
				@@ -157,6 +157,8 @@ Connections and IOs
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/eval_adin1110ebz/doc/index.rst
+++ b/boards/adi/eval_adin1110ebz/doc/index.rst
@ -83,6 +83,8 @@ to a FT232, so available through Micro USB connector. Default settings are 11520
				@@ -83,6 +83,8 @@ to a FT232, so available through Micro USB connector. Default settings are 11520
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/eval_adin2111ebz/doc/index.rst
+++ b/boards/adi/eval_adin2111ebz/doc/index.rst
@ -88,6 +88,8 @@ Same UART1 TX and RX cmos signals are available before the FT232, at P9 connecto
				@@ -88,6 +88,8 @@ Same UART1 TX and RX cmos signals are available before the FT232, at P9 connecto
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/max32650evkit/doc/index.rst
+++ b/boards/adi/max32650evkit/doc/index.rst
@ -70,6 +70,8 @@ Supported Features
				@@ -70,6 +70,8 @@ Supported Features
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========
 The MAX32650 MCU can be flashed by connecting an external debug probe to the
--- a/boards/adi/max32650fthr/doc/index.rst
+++ b/boards/adi/max32650fthr/doc/index.rst
@ -69,6 +69,8 @@ Supported Features
				@@ -69,6 +69,8 @@ Supported Features
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========
 The MAX32650 MCU can be flashed by connecting an external debug probe to the
--- a/boards/adi/max32655evkit/doc/index.rst
+++ b/boards/adi/max32655evkit/doc/index.rst
@ -127,6 +127,8 @@ Connections and IOs
				@@ -127,6 +127,8 @@ Connections and IOs
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/max32655fthr/doc/index.rst
+++ b/boards/adi/max32655fthr/doc/index.rst
@ -152,6 +152,8 @@ used as a user LED.
				@@ -152,6 +152,8 @@ used as a user LED.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/max32660evsys/doc/index.rst
+++ b/boards/adi/max32660evsys/doc/index.rst
@ -76,6 +76,8 @@ Supported Features
				@@ -76,6 +76,8 @@ Supported Features
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/max32662evkit/doc/index.rst
+++ b/boards/adi/max32662evkit/doc/index.rst
@ -169,6 +169,8 @@ Connections and IOs
				@@ -169,6 +169,8 @@ Connections and IOs
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/max32666evkit/doc/index.rst
+++ b/boards/adi/max32666evkit/doc/index.rst
@ -255,6 +255,8 @@ Connections and IOs
				@@ -255,6 +255,8 @@ Connections and IOs
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/max32666fthr/doc/index.rst
+++ b/boards/adi/max32666fthr/doc/index.rst
@ -174,6 +174,8 @@ JH4 Pinout
				@@ -174,6 +174,8 @@ JH4 Pinout
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/max32670evkit/doc/index.rst
+++ b/boards/adi/max32670evkit/doc/index.rst
@ -148,6 +148,8 @@ Connections and IOs
				@@ -148,6 +148,8 @@ Connections and IOs
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/max32672evkit/doc/index.rst
+++ b/boards/adi/max32672evkit/doc/index.rst
@ -279,11 +279,9 @@ The I2C ports can independently pulled up to V_AUX (3.3V default) through JP4 (I
				@@ -279,11 +279,9 @@ The I2C ports can independently pulled up to V_AUX (3.3V default) through JP4 (I
 Programming and Debugging
 *************************

-The IC can be reset by pushbutton SW1.
-
+.. zephyr:board-supported-runners::

-Programming and Debugging
-*************************
+The IC can be reset by pushbutton SW1.

 Flashing
 ========
--- a/boards/adi/max32672fthr/doc/index.rst
+++ b/boards/adi/max32672fthr/doc/index.rst
@ -164,6 +164,8 @@ J7 Pinout
				@@ -164,6 +164,8 @@ J7 Pinout
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/max32675evkit/doc/index.rst
+++ b/boards/adi/max32675evkit/doc/index.rst
@ -344,6 +344,8 @@ respectively. If the pushbutton is pressed, the attached port pin is pulled low.
				@@ -344,6 +344,8 @@ respectively. If the pushbutton is pressed, the attached port pin is pulled low.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/max32680evkit/doc/index.rst
+++ b/boards/adi/max32680evkit/doc/index.rst
@ -287,6 +287,8 @@ Connections and IOs
				@@ -287,6 +287,8 @@ Connections and IOs
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/max32690evkit/doc/index.rst
+++ b/boards/adi/max32690evkit/doc/index.rst
@ -241,6 +241,8 @@ Connections and IOs
				@@ -241,6 +241,8 @@ Connections and IOs
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/max32690fthr/doc/index.rst
+++ b/boards/adi/max32690fthr/doc/index.rst
@ -68,6 +68,8 @@ Supported Features
				@@ -68,6 +68,8 @@ Supported Features
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/max78000evkit/doc/index.rst
+++ b/boards/adi/max78000evkit/doc/index.rst
@ -235,6 +235,8 @@ Connections and IOs
				@@ -235,6 +235,8 @@ Connections and IOs
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/max78000fthr/doc/index.rst
+++ b/boards/adi/max78000fthr/doc/index.rst
@ -138,6 +138,8 @@ J4 Pinout
				@@ -138,6 +138,8 @@ J4 Pinout
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/max78002evkit/doc/index.rst
+++ b/boards/adi/max78002evkit/doc/index.rst
@ -408,6 +408,8 @@ Connections and IOs
				@@ -408,6 +408,8 @@ Connections and IOs
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/adi/sdp_k1/doc/index.rst
+++ b/boards/adi/sdp_k1/doc/index.rst
@ -103,6 +103,8 @@ Default Zephyr Peripheral Mapping:
				@@ -103,6 +103,8 @@ Default Zephyr Peripheral Mapping:
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The ADI SDP-K1 be programmed over USB using the DAPLink firmware running on an
 embedded NXP Freescale microcontroller or a 10-pin ``DEBUG`` header connected
 to a STLINK debugger.
--- a/boards/alientek/pandora_stm32l475/doc/index.rst
+++ b/boards/alientek/pandora_stm32l475/doc/index.rst
@ -121,6 +121,8 @@ Default settings are 115200 8N1.
				@@ -121,6 +121,8 @@ Default settings are 115200 8N1.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/altr/max10/doc/index.rst
+++ b/boards/altr/max10/doc/index.rst
@ -130,6 +130,8 @@ in the SDK:
				@@ -130,6 +130,8 @@ in the SDK:
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/amd/acp_6_0_adsp/doc/index.rst
+++ b/boards/amd/acp_6_0_adsp/doc/index.rst
@ -69,6 +69,8 @@ The bottom three variables are specific to acp_6_0.
				@@ -69,6 +69,8 @@ The bottom three variables are specific to acp_6_0.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Building
 ========

--- a/boards/amd/kv260_r5/doc/index.rst
+++ b/boards/amd/kv260_r5/doc/index.rst
@ -55,6 +55,8 @@ The following platform features are unsupported:
				@@ -55,6 +55,8 @@ The following platform features are unsupported:
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Currently the best way to run this sample is by loading it through remoteproc
 from the APU, running Linux, to the RPU, assuming the target board has a compatible
 Linux kernel.
--- a/boards/amd/versalnet_rpu/doc/index.rst
+++ b/boards/amd/versalnet_rpu/doc/index.rst
@ -52,6 +52,8 @@ The following platform features are unsupported:
				@@ -52,6 +52,8 @@ The following platform features are unsupported:
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Build and flash in the usual way. Here is an example for the :zephyr:code-sample:`hello_world` application.

 .. zephyr-app-commands::
--- a/boards/andestech/adp_xc7k_ae350/doc/index.rst
+++ b/boards/andestech/adp_xc7k_ae350/doc/index.rst
@ -170,6 +170,8 @@ settings are 115200 8N1.
				@@ -170,6 +170,8 @@ settings are 115200 8N1.
 Programming and debugging
 *************************

+.. zephyr:board-supported-runners::
+
 For debugging zephyr applications or burning them into a flash, you will need to
 connect Andes ICE from host computer to ADP-XC7K board and execute the
 Andes ICE management software, ICEman, on this host computer.
--- a/boards/antmicro/myra_sip_baseboard/doc/index.rst
+++ b/boards/antmicro/myra_sip_baseboard/doc/index.rst
@ -172,6 +172,8 @@ settings are 115200 8N1.
				@@ -172,6 +172,8 @@ settings are 115200 8N1.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Applications for the ``myra_sip_baseboard`` board target can be built and flashed in the usual way (see :ref:`build_an_application` and :ref:`application_run` for more details).

 Flashing
--- a/boards/arduino/due/doc/index.rst
+++ b/boards/arduino/due/doc/index.rst
@ -104,6 +104,8 @@ default, is utilizing this controller.
				@@ -104,6 +104,8 @@ default, is utilizing this controller.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/arduino/giga_r1/doc/index.rst
+++ b/boards/arduino/giga_r1/doc/index.rst
@ -63,6 +63,8 @@ two cores. This is done in 3 ways:
				@@ -63,6 +63,8 @@ two cores. This is done in 3 ways:
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Applications for the ``arduino_giga_r1`` board should be built per core target,
 using either ``arduino_giga_r1/stm32h747xx/m7`` or ``arduino_giga_r1/stm32h747xx/m4`` as the target.

--- a/boards/arduino/mkrzero/doc/index.rst
+++ b/boards/arduino/mkrzero/doc/index.rst
@ -78,6 +78,8 @@ Arduino MKR Zero, the DAC is available on pin A0.
				@@ -78,6 +78,8 @@ Arduino MKR Zero, the DAC is available on pin A0.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The Arduino MKR Zero ships the BOSSA compatible bootloader.  The
 bootloader can be entered by quickly tapping the reset button twice.

--- a/boards/arduino/nano_33_ble/doc/index.rst
+++ b/boards/arduino/nano_33_ble/doc/index.rst
@ -29,6 +29,8 @@ as ``pull-up-gpios``.
				@@ -29,6 +29,8 @@ as ``pull-up-gpios``.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 This board requires the Arduino variant of bossac. You will not
 be able to flash with the bossac included with the zephyr-sdk, or
 using shumatech's mainline build.
--- a/boards/arduino/nano_33_iot/doc/index.rst
+++ b/boards/arduino/nano_33_iot/doc/index.rst
@ -66,6 +66,8 @@ serial port that echos characters back to the host PC.
				@@ -66,6 +66,8 @@ serial port that echos characters back to the host PC.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The Nano 33 IOT ships the BOSSA compatible UF2 bootloader.  The
 bootloader can be entered by quickly tapping the reset button twice.

--- a/boards/arduino/nicla_sense_me/doc/index.rst
+++ b/boards/arduino/nicla_sense_me/doc/index.rst
@ -48,6 +48,8 @@ For more details please refer to the `datasheet`_, `full pinout`_ and the `schem
				@@ -48,6 +48,8 @@ For more details please refer to the `datasheet`_, `full pinout`_ and the `schem
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Applications for the ``arduino_nicla_sense_me`` board configuration can be built and
 flashed in the usual way (see :ref:`build_an_application` and
 :ref:`application_run` for more details).
--- a/boards/arduino/nicla_vision/doc/index.rst
+++ b/boards/arduino/nicla_vision/doc/index.rst
@ -67,6 +67,8 @@ two cores. This is done in 3 ways:
				@@ -67,6 +67,8 @@ two cores. This is done in 3 ways:
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Applications for the ``arduino_nicla_vision`` board should be built per core target,
 using either ``arduino_nicla_vision/stm32h747xx/m7`` or ``arduino_nicla_vision/stm32h747xx/m4`` as the target.

--- a/boards/arduino/opta/doc/index.rst
+++ b/boards/arduino/opta/doc/index.rst
@ -98,6 +98,8 @@ two cores. This is done in 3 ways:
				@@ -98,6 +98,8 @@ two cores. This is done in 3 ways:
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Applications for the ``arduino_opta`` use the regular Zephyr build commands.
 See :ref:`build_an_application` for more information about application builds.

--- a/boards/arduino/portenta_h7/doc/index.rst
+++ b/boards/arduino/portenta_h7/doc/index.rst
@ -66,7 +66,9 @@ two cores. This is done in 3 ways:
				@@ -66,7 +66,9 @@ two cores. This is done in 3 ways:
  to avoid potential concurrent access issues.

 Building and Flashing
-*************************
+*********************
+
+.. zephyr:board-supported-runners::

 Applications for the ``arduino_portenta_h7`` board should be built per core target,
 using either ``arduino_portenta_h7_m7`` or ``arduino_portenta_h7_m4`` as the target.
--- a/boards/arduino/uno_r4/doc/index.rst
+++ b/boards/arduino/uno_r4/doc/index.rst
@ -25,6 +25,8 @@ Supported Features
				@@ -25,6 +25,8 @@ Supported Features
 Programming and debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Debug adapter
 =============

--- a/boards/arduino/zero/doc/index.rst
+++ b/boards/arduino/zero/doc/index.rst
@ -74,6 +74,8 @@ Arduino Zero, the DAC is available on pin A0.
				@@ -74,6 +74,8 @@ Arduino Zero, the DAC is available on pin A0.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The Arduino Zero comes with a Atmel Embedded Debugger (EDBG).  This
 provides a debug interface to the SAMD21 chip and is supported by
 OpenOCD.
--- a/boards/aspeed/ast1030_evb/doc/index.rst
+++ b/boards/aspeed/ast1030_evb/doc/index.rst
@ -48,6 +48,8 @@ UART5 is configured for serial logs.  The default serial setup is 115200 8N1.
				@@ -48,6 +48,8 @@ UART5 is configured for serial logs.  The default serial setup is 115200 8N1.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 This board comes with a JTAG port which facilitates debugging using a single physical connection.

 Flashing
--- a/boards/atmel/sam/sam4e_xpro/doc/index.rst
+++ b/boards/atmel/sam/sam4e_xpro/doc/index.rst
@ -51,6 +51,8 @@ chip.
				@@ -51,6 +51,8 @@ chip.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing the Zephyr project onto SAM4E MCU requires the `OpenOCD tool`_.
 By default a factory new SAM4E chip will boot SAM-BA boot loader located in
 the ROM, not the flashed image. This is determined by the value of GPNVM1
--- a/boards/atmel/sam/sam4l_ek/doc/index.rst
+++ b/boards/atmel/sam/sam4l_ek/doc/index.rst
@ -73,6 +73,8 @@ between all others headers and RS-485 port.
				@@ -73,6 +73,8 @@ between all others headers and RS-485 port.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The SAM4L-EK board have a Segger Embedded Debugger Unit
 `J-Link OB <https://www.segger.com/jlink-ob.html>`_.  This provides a debug
 interface to the SAM4LC4C chip. You can use Ozone or JLink to communicate with
--- a/boards/atmel/sam/sam4s_xplained/doc/index.rst
+++ b/boards/atmel/sam/sam4s_xplained/doc/index.rst
@ -48,6 +48,8 @@ The section flashing uses the UART from the Segger USB debug connection.
				@@ -48,6 +48,8 @@ The section flashing uses the UART from the Segger USB debug connection.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The SAM4S Xplained board comes with Segger
 `J-Link OB <https://www.segger.com/jlink-ob.html>`_. This provides a debug
 interface to the SAM4S16C chip. You can use Ozone or JLink to communicate with
--- a/boards/atmel/sam/sam_e70_xplained/doc/index.rst
+++ b/boards/atmel/sam/sam_e70_xplained/doc/index.rst
@ -50,6 +50,8 @@ chip.
				@@ -50,6 +50,8 @@ chip.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing the Zephyr project onto SAM E70 MCU requires the `OpenOCD tool`_.
 Support for Atmel SAM E microcontroller series was added in OpenOCD release
 0.10.0, which was added in Zephyr SDK 0.9.2.
--- a/boards/atmel/sam/sam_v71_xult/doc/index.rst
+++ b/boards/atmel/sam/sam_v71_xult/doc/index.rst
@ -56,6 +56,8 @@ for the console and is available as a Virtual COM Port via EDBG USB chip.
				@@ -56,6 +56,8 @@ for the console and is available as a Virtual COM Port via EDBG USB chip.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing the Zephyr project onto SAM V71 MCU requires the `OpenOCD tool`_.
 By default a factory new SAM V71 chip will boot the `SAM-BA`_ boot loader
 located in the ROM, not the flashed image. This is determined by the value
--- a/boards/atmel/sam0/samc21n_xpro/doc/index.rst
+++ b/boards/atmel/sam0/samc21n_xpro/doc/index.rst
@ -83,6 +83,8 @@ driven by TCC2 instead of by GPIO.
				@@ -83,6 +83,8 @@ driven by TCC2 instead of by GPIO.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The SAM C21N Xplained Pro comes with a Atmel Embedded Debugger (EDBG). This
 provides a debug interface to the SAMC21 chip and is supported by
 OpenOCD.
--- a/boards/atmel/sam0/samd20_xpro/doc/index.rst
+++ b/boards/atmel/sam0/samd20_xpro/doc/index.rst
@ -53,6 +53,8 @@ SERCOM0 is available on the EXT1 connector.
				@@ -53,6 +53,8 @@ SERCOM0 is available on the EXT1 connector.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The SAM D20 Xplained Pro comes with a Atmel Embedded Debugger (EDBG).  This
 provides a debug interface to the SAMD20 chip and is supported by
 OpenOCD.
--- a/boards/atmel/sam0/samd21_xpro/doc/index.rst
+++ b/boards/atmel/sam0/samd21_xpro/doc/index.rst
@ -88,6 +88,8 @@ SERCOM5 is connected to an 8 megabit SPI flash.
				@@ -88,6 +88,8 @@ SERCOM5 is connected to an 8 megabit SPI flash.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The SAM D21 Xplained Pro comes with a Atmel Embedded Debugger (EDBG).  This
 provides a debug interface to the SAMD21 chip and is supported by
 OpenOCD.
--- a/boards/atmel/sam0/same54_xpro/doc/index.rst
+++ b/boards/atmel/sam0/same54_xpro/doc/index.rst
@ -111,6 +111,8 @@ Authentication device.
				@@ -111,6 +111,8 @@ Authentication device.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The SAM E54 Xplained Pro comes with a Atmel Embedded Debugger (EDBG).  This
 provides a debug interface to the SAME54 chip and is supported by
 OpenOCD.
--- a/boards/atmel/sam0/saml21_xpro/doc/index.rst
+++ b/boards/atmel/sam0/saml21_xpro/doc/index.rst
@ -93,6 +93,8 @@ The SAML21 MCU has 6 SERCOM based SPIs, with two configured as SPI in this BSP.
				@@ -93,6 +93,8 @@ The SAML21 MCU has 6 SERCOM based SPIs, with two configured as SPI in this BSP.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The SAM L21 Xplained Pro comes with a Atmel Embedded Debugger (EDBG).  This
 provides a debug interface to the SAML21 chip and is supported by
 OpenOCD.
--- a/boards/atmel/sam0/samr21_xpro/doc/index.rst
+++ b/boards/atmel/sam0/samr21_xpro/doc/index.rst
@ -134,6 +134,8 @@ echo demo. More information at :zephyr:code-sample:`sockets-echo-server` and
				@@ -134,6 +134,8 @@ echo demo. More information at :zephyr:code-sample:`sockets-echo-server` and
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The SAM R21 Xplained Pro comes with a Atmel Embedded Debugger (EDBG).  This
 provides a debug interface to the SAMR21 chip and is supported by
 OpenOCD.
--- a/boards/atmel/sam0/samr34_xpro/doc/index.rst
+++ b/boards/atmel/sam0/samr34_xpro/doc/index.rst
@ -94,6 +94,8 @@ The SAMR34 MCU has 6 SERCOM based SPIs, with two configured as SPI in this BSP.
				@@ -94,6 +94,8 @@ The SAMR34 MCU has 6 SERCOM based SPIs, with two configured as SPI in this BSP.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The SAM R34 Xplained Pro comes with a Atmel Embedded Debugger (EDBG).  This
 provides a debug interface to the SAMR34 chip and is supported by
 OpenOCD.
--- a/boards/bbc/microbit/doc/index.rst
+++ b/boards/bbc/microbit/doc/index.rst
@ -37,6 +37,8 @@ Supported Features
				@@ -37,6 +37,8 @@ Supported Features
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/bbc/microbit_v2/doc/index.rst
+++ b/boards/bbc/microbit_v2/doc/index.rst
@ -38,6 +38,8 @@ Supported Features
				@@ -38,6 +38,8 @@ Supported Features
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/bcdevices/plt_demo_v2/doc/index.rst
+++ b/boards/bcdevices/plt_demo_v2/doc/index.rst
@ -72,6 +72,8 @@ NFC
				@@ -72,6 +72,8 @@ NFC
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Applications for the ``blueclover_plt_demo_v2/nrf52832`` board configuration
 can be built and flashed in the usual way (see :ref:`build_an_application`
 and :ref:`application_run` for more details).
--- a/boards/beagle/beagleplay/doc/beagleplay_cc1352p7.rst
+++ b/boards/beagle/beagleplay/doc/beagleplay_cc1352p7.rst
@ -121,6 +121,8 @@ CC1352 reset is connected to AM62 GPIO0_14.
				@@ -121,6 +121,8 @@ CC1352 reset is connected to AM62 GPIO0_14.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/blues/swan_r5/doc/index.rst
+++ b/boards/blues/swan_r5/doc/index.rst
@ -159,6 +159,8 @@ assigned to LPUART.  Default settings are 115200 8N1.
				@@ -159,6 +159,8 @@ assigned to LPUART.  Default settings are 115200 8N1.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Connect Swan to your host computer using the USB port.
 Then build and flash an application. Here is an example for the
 :zephyr:code-sample:`hello_world` application.
--- a/boards/bytesatwork/bytesensi_l/doc/index.rst
+++ b/boards/bytesatwork/bytesensi_l/doc/index.rst
@ -95,6 +95,8 @@ External GPS Antenna @ J3
				@@ -95,6 +95,8 @@ External GPS Antenna @ J3
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========
 The byteSENSI-L board can be flashed with the SEGGER JLink programmer.
--- a/boards/contextualelectronics/abc/doc/index.rst
+++ b/boards/contextualelectronics/abc/doc/index.rst
@ -44,6 +44,8 @@ features.
				@@ -44,6 +44,8 @@ features.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Applications for the ``contextualelectronics_abc`` board configuration can be
 built and flashed in the usual way (see :ref:`build_an_application`
 and :ref:`application_run` for more details).
--- a/boards/croxel/croxel_cx1825/doc/index.rst
+++ b/boards/croxel/croxel_cx1825/doc/index.rst
@ -76,6 +76,8 @@ Digital Inputs
				@@ -76,6 +76,8 @@ Digital Inputs
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Applications for the ``croxel_cx1825/nrf52840`` board configuration
 can be built and flashed in the usual way (see :ref:`build_an_application`
 and :ref:`application_run` for more details).
--- a/boards/ct/ctcc/doc/index.rst
+++ b/boards/ct/ctcc/doc/index.rst
@ -81,6 +81,8 @@ nRF9161:
				@@ -81,6 +81,8 @@ nRF9161:
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Applications for ``ctcc`` boards can be
 built in the usual way (see :ref:`build_an_application` for more details).

--- a/boards/cypress/cy8ckit_062_ble/doc/index.rst
+++ b/boards/cypress/cy8ckit_062_ble/doc/index.rst
@ -140,6 +140,8 @@ To get the OpenOCD package, it is required that you
				@@ -140,6 +140,8 @@ To get the OpenOCD package, it is required that you
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The CY8CKIT-062-BLE includes an onboard programmer/debugger (KitProg2) with
 mass storage programming to provide debugging, flash programming, and serial
 communication over USB. There are also PSOC 6 program and debug headers J11
--- a/boards/cypress/cy8ckit_062_wifi_bt/doc/index.rst
+++ b/boards/cypress/cy8ckit_062_wifi_bt/doc/index.rst
@ -127,6 +127,8 @@ To get the OpenOCD package, it is required that you
				@@ -127,6 +127,8 @@ To get the OpenOCD package, it is required that you
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The CY8CKIT-062-WiFi-BT includes an onboard programmer/debugger (KitProg2) with
 mass storage programming to provide debugging, flash programming, and serial
 communication over USB. There are also PSOC 6 program and debug headers J11
--- a/boards/dptechnics/walter/doc/index.rst
+++ b/boards/dptechnics/walter/doc/index.rst
@ -77,6 +77,8 @@ below to retrieve those files.
				@@ -77,6 +77,8 @@ below to retrieve those files.
 Building & Flashing
 *******************

+.. zephyr:board-supported-runners::
+
 Simple boot
 ===========

--- a/boards/dragino/lsn50/doc/index.rst
+++ b/boards/dragino/lsn50/doc/index.rst
@ -113,6 +113,8 @@ Default settings are 115200 8N1.
				@@ -113,6 +113,8 @@ Default settings are 115200 8N1.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Applications for the ``dragino_lsn50`` board configuration can be built and
 flashed in the usual way (see :ref:`build_an_application` and
 :ref:`application_run` for more details).
--- a/boards/dragino/nbsn95/doc/index.rst
+++ b/boards/dragino/nbsn95/doc/index.rst
@ -112,6 +112,8 @@ Default settings are 115200 8N1.
				@@ -112,6 +112,8 @@ Default settings are 115200 8N1.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Applications for the ``dragino_nbsn95`` board configuration can be built and
 flashed in the usual way (see :ref:`build_an_application` and
 :ref:`application_run` for more details).
--- a/boards/ebyte/e73_tbb/doc/index.rst
+++ b/boards/ebyte/e73_tbb/doc/index.rst
@ -135,6 +135,8 @@ NFC_ANT
				@@ -135,6 +135,8 @@ NFC_ANT
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/electronut/nrf52840_blip/doc/index.rst
+++ b/boards/electronut/nrf52840_blip/doc/index.rst
@ -80,6 +80,8 @@ MicroSD is connected to these pins, and CS pin is connected to P0.17.
				@@ -80,6 +80,8 @@ MicroSD is connected to these pins, and CS pin is connected to P0.17.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Applications for the ``nrf52840_blip`` board configuration can be
 built and flashed in the usual way (see :ref:`build_an_application`
 and :ref:`application_run` for more details); The onboard Black Magic
--- a/boards/electronut/nrf52840_papyr/doc/nrf52840_papyr.rst
+++ b/boards/electronut/nrf52840_papyr/doc/nrf52840_papyr.rst
@ -89,6 +89,8 @@ Other pins used by the e-paper display are:
				@@ -89,6 +89,8 @@ Other pins used by the e-paper display are:
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Applications for the ``nrf52840_papyr`` board configuration can be
 built and flashed in the usual way (see :ref:`build_an_application`
 and :ref:`application_run` for more details); Black Magic
--- a/boards/element14/warp7/doc/index.rst
+++ b/boards/element14/warp7/doc/index.rst
@ -110,6 +110,8 @@ the number 6 is used in the mikroBUS connector.
				@@ -110,6 +110,8 @@ the number 6 is used in the mikroBUS connector.
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 The WaRP7 doesn't have QSPI flash for the M4 and it needs to be started by
 the A7 core. The A7 core is responsible to load the M4 binary application into
 the RAM, put the M4 in reset, set the M4 Program Counter and Stack Pointer, and
--- a/boards/ene/kb1200_evb/doc/index.rst
+++ b/boards/ene/kb1200_evb/doc/index.rst
@ -33,6 +33,8 @@ See Processor clock control register (refer 5.1 General Configuration)
				@@ -33,6 +33,8 @@ See Processor clock control register (refer 5.1 General Configuration)
 Programming and Debugging
 *************************

+.. zephyr:board-supported-runners::
+
 Flashing
 ========

--- a/boards/espressif/esp32_devkitc_wroom/doc/index.rst
+++ b/boards/espressif/esp32_devkitc_wroom/doc/index.rst
@ -72,6 +72,8 @@ below to retrieve those files.
				@@ -72,6 +72,8 @@ below to retrieve those files.
 Building & Flashing
 *******************

+.. zephyr:board-supported-runners::
+
 Simple boot
 ===========

--- a/boards/espressif/esp32_devkitc_wrover/doc/index.rst
+++ b/boards/espressif/esp32_devkitc_wrover/doc/index.rst
@ -72,6 +72,8 @@ below to retrieve those files.
				@@ -72,6 +72,8 @@ below to retrieve those files.
 Building & Flashing
 *******************

+.. zephyr:board-supported-runners::
+
 Simple boot
 ===========

--- a/boards/espressif/esp32_ethernet_kit/doc/index.rst
+++ b/boards/espressif/esp32_ethernet_kit/doc/index.rst
@ -432,6 +432,8 @@ below to retrieve those files.
				@@ -432,6 +432,8 @@ below to retrieve those files.
 Building & Flashing
 *******************

+.. zephyr:board-supported-runners::
+
 Simple boot
 ===========

--- a/boards/espressif/esp32c3_devkitc/doc/index.rst
+++ b/boards/espressif/esp32c3_devkitc/doc/index.rst
@ -64,6 +64,8 @@ below to retrieve those files.
				@@ -64,6 +64,8 @@ below to retrieve those files.
 Building & Flashing
 *******************

+.. zephyr:board-supported-runners::
+
 Simple boot
 ===========

--- a/boards/espressif/esp32c3_devkitm/doc/index.rst
+++ b/boards/espressif/esp32c3_devkitm/doc/index.rst
@ -64,6 +64,8 @@ below to retrieve those files.
				@@ -64,6 +64,8 @@ below to retrieve those files.
 Building & Flashing
 *******************

+.. zephyr:board-supported-runners::
+
 Simple boot
 ===========

--- a/boards/espressif/esp32c3_rust/doc/index.rst
+++ b/boards/espressif/esp32c3_rust/doc/index.rst
@ -109,6 +109,8 @@ below to retrieve those files.
				@@ -109,6 +109,8 @@ below to retrieve those files.
 Building & Flashing
 *******************

+.. zephyr:board-supported-runners::
+
 Simple boot
 ===========

--- a/boards/espressif/esp32c6_devkitc/doc/index.rst
+++ b/boards/espressif/esp32c6_devkitc/doc/index.rst
@ -106,6 +106,8 @@ below to retrieve those files.
				@@ -106,6 +106,8 @@ below to retrieve those files.
 Building & Flashing
 *******************

+.. zephyr:board-supported-runners::
+
 Simple boot
 ===========

--- a/Show More
+++ b/Show More