boards: Convert nucleo_g474re to HWM v2

Port the board to HWMv2. Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
1 year ago · ffdcb60185
12 changed files with 10 additions and 14 deletions
--- a/boards/boards_legacy/arm/nucleo_g474re/Kconfig.board
+++ b/boards/boards_legacy/arm/nucleo_g474re/Kconfig.board
@ -1,8 +0,0 @@
				@@ -1,8 +0,0 @@
-# STM32G474RE Nucleo board configuration
-
-# Copyright (c) 2019 STMicroelectronics.
-# SPDX-License-Identifier: Apache-2.0
-
-config BOARD_NUCLEO_G474RE
-	bool "Nucleo G474RE Development Board"
-	depends on SOC_STM32G474XX
--- a/boards/boards_legacy/arm/nucleo_g474re/Kconfig.defconfig
+++ b/boards/boards_legacy/arm/nucleo_g474re/Kconfig.defconfig
@ -5,9 +5,6 @@
				@@ -5,9 +5,6 @@

 if BOARD_NUCLEO_G474RE

-config BOARD
-	default "nucleo_g474re"
-
 config SPI_STM32_INTERRUPT
 	default y
 	depends on SPI
--- a/boards/st/nucleo_g474re/Kconfig.nucleo_g474re
+++ b/boards/st/nucleo_g474re/Kconfig.nucleo_g474re
@ -0,0 +1,5 @@
				@@ -0,0 +1,5 @@
+# Copyright (c) 2019 STMicroelectronics.
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_NUCLEO_G474RE
+	select SOC_STM32G474XX
--- a/boards/boards_legacy/arm/nucleo_g474re/arduino_r3_connector.dtsi
+++ b/boards/boards_legacy/arm/nucleo_g474re/arduino_r3_connector.dtsi
--- a/boards/boards_legacy/arm/nucleo_g474re/board.cmake
+++ b/boards/boards_legacy/arm/nucleo_g474re/board.cmake
--- a/boards/st/nucleo_g474re/board.yml
+++ b/boards/st/nucleo_g474re/board.yml
@ -0,0 +1,5 @@
				@@ -0,0 +1,5 @@
+board:
+  name: nucleo_g474re
+  vendor: st
+  socs:
+    - name: stm32g474xx
--- a/boards/boards_legacy/arm/nucleo_g474re/doc/img/nucleo_g474re.jpg
+++ b/boards/boards_legacy/arm/nucleo_g474re/doc/img/nucleo_g474re.jpg
--- a/boards/boards_legacy/arm/nucleo_g474re/doc/index.rst
+++ b/boards/boards_legacy/arm/nucleo_g474re/doc/index.rst
--- a/boards/boards_legacy/arm/nucleo_g474re/nucleo_g474re.dts
+++ b/boards/boards_legacy/arm/nucleo_g474re/nucleo_g474re.dts
--- a/boards/boards_legacy/arm/nucleo_g474re/nucleo_g474re.yaml
+++ b/boards/boards_legacy/arm/nucleo_g474re/nucleo_g474re.yaml
--- a/boards/boards_legacy/arm/nucleo_g474re/nucleo_g474re_defconfig
+++ b/boards/boards_legacy/arm/nucleo_g474re/nucleo_g474re_defconfig
@ -1,8 +1,5 @@
				@@ -1,8 +1,5 @@
 # SPDX-License-Identifier: Apache-2.0

-CONFIG_SOC_SERIES_STM32G4X=y
-CONFIG_SOC_STM32G474XX=y
-
 # enable uart driver
 CONFIG_SERIAL=y

--- a/boards/boards_legacy/arm/nucleo_g474re/support/openocd.cfg
+++ b/boards/boards_legacy/arm/nucleo_g474re/support/openocd.cfg