boards: Convert nucleo_l4a6zg to HWM v2

Port the board to HWMv2. Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
1 year ago · 24e357d623
11 changed files with 11 additions and 15 deletions
--- a/boards/boards_legacy/arm/nucleo_l4a6zg/Kconfig.board
+++ b/boards/boards_legacy/arm/nucleo_l4a6zg/Kconfig.board
@ -1,8 +0,0 @@
				@@ -1,8 +0,0 @@
-# STM32L4A6ZG Nucleo board configuration
-
-# Copyright (c) 2022 Tomislav Milkovic
-# SPDX-License-Identifier: Apache-2.0
-
-config BOARD_NUCLEO_L4A6ZG
-	bool "Nucleo L4A6ZG Development Board"
-	depends on SOC_STM32L4A6XX
--- a/boards/boards_legacy/arm/nucleo_l4a6zg/Kconfig.defconfig
+++ b/boards/boards_legacy/arm/nucleo_l4a6zg/Kconfig.defconfig
@ -5,9 +5,6 @@
				@@ -5,9 +5,6 @@

 if BOARD_NUCLEO_L4A6ZG

-config BOARD
-	default "nucleo_l4a6zg"
-
 config SPI_STM32_INTERRUPT
 	default y
 	depends on SPI
--- a/boards/st/nucleo_l4a6zg/Kconfig.nucleo_l4a6zg
+++ b/boards/st/nucleo_l4a6zg/Kconfig.nucleo_l4a6zg
@ -0,0 +1,5 @@
				@@ -0,0 +1,5 @@
+# Copyright (c) 2022 Tomislav Milkovic
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_NUCLEO_L4A6ZG
+	select SOC_STM32L4A6XX
--- a/boards/boards_legacy/arm/nucleo_l4a6zg/arduino_r3_connector.dtsi
+++ b/boards/boards_legacy/arm/nucleo_l4a6zg/arduino_r3_connector.dtsi
--- a/boards/boards_legacy/arm/nucleo_l4a6zg/board.cmake
+++ b/boards/boards_legacy/arm/nucleo_l4a6zg/board.cmake
--- a/boards/st/nucleo_l4a6zg/board.yml
+++ b/boards/st/nucleo_l4a6zg/board.yml
@ -0,0 +1,5 @@
				@@ -0,0 +1,5 @@
+board:
+  name: nucleo_l4a6zg
+  vendor: st
+  socs:
+    - name: stm32l4a6xx
--- a/boards/boards_legacy/arm/nucleo_l4a6zg/doc/index.rst
+++ b/boards/boards_legacy/arm/nucleo_l4a6zg/doc/index.rst
@ -138,7 +138,7 @@ The Zephyr nucleo_l4a6zg board configuration supports the following hardware fea
				@@ -138,7 +138,7 @@ The Zephyr nucleo_l4a6zg board configuration supports the following hardware fea
 Other hardware features are not yet supported on this Zephyr port.

 The default configuration can be found in the defconfig file:
-``boards/arm/nucleo_l4a6zg/nucleo_l4a6zg_defconfig``
+``boards/st/nucleo_l4a6zg/nucleo_l4a6zg_defconfig``


 Connections and IOs
--- a/boards/boards_legacy/arm/nucleo_l4a6zg/nucleo_l4a6zg.dts
+++ b/boards/boards_legacy/arm/nucleo_l4a6zg/nucleo_l4a6zg.dts
--- a/boards/boards_legacy/arm/nucleo_l4a6zg/nucleo_l4a6zg.yaml
+++ b/boards/boards_legacy/arm/nucleo_l4a6zg/nucleo_l4a6zg.yaml
--- a/boards/boards_legacy/arm/nucleo_l4a6zg/nucleo_l4a6zg_defconfig
+++ b/boards/boards_legacy/arm/nucleo_l4a6zg/nucleo_l4a6zg_defconfig
@ -1,8 +1,5 @@
				@@ -1,8 +1,5 @@
 # SPDX-License-Identifier: Apache-2.0

-CONFIG_SOC_SERIES_STM32L4X=y
-CONFIG_SOC_STM32L4A6XX=y
-
 # enable uart driver
 CONFIG_SERIAL=y

--- a/boards/boards_legacy/arm/nucleo_l4a6zg/support/openocd.cfg
+++ b/boards/boards_legacy/arm/nucleo_l4a6zg/support/openocd.cfg