9fb4a78439
boards: nxp: make equal partition slots
...
- creates equal partition slots for NXP boards.
- allows support for all firmware update modes,
primarily for the new preferred "Swap using offset".
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
2 months ago
de13103f0b
boards: doc: adopt zephyr:board-supported-runners directive
...
Add .. zephyr:board-supported-runners:: to the Programming and Debugging
section of the documentation for each board that has one such section,
as this is the most natural place to put it.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
3 months ago
9abfc8301a
doc: nxp: adopt zephyr:board-supported-hw directive
...
Replace manually authored hardware features table with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
3 months ago
3598c413ed
doc: boards: nxp: Add footer to board doc pages
...
Adds common footer to NXP boards.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
4 months ago
3767641ff3
frdm_k64f: Add pyocd.yaml with configuration.
...
Add configuration file for pyocd with two parameters:
- connect_mode
- reset_type
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
5 months ago
fe87abe0b9
boards: Remove 'xtools' toolchain variant references
...
This commit removes all references to the `xtools` toolchain variant in the
board YAML files.
Note that the `xtools` toolchain variant has been deprecated since Zephyr
v3.3.0 and now removed.
The removal process was automated using the following command line:
git grep -l xtools -- boards/*.{yml,yaml} | \
xargs -n 1 -P $(nproc) \
yq -i 'del(.toolchain[] | select(. == "xtools"))'
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
6 months ago
c16ccf8e7d
dts: bindings: rename nxp,kinetis-ftm-pwm compatible
...
Rename "nxp,kinetis-ftm-pwm" compatible to "nxp,ftm-pwm" to remove the
device family from its name.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
7 months ago
b345d79fa8
boards: nxp: Add 'supported: flash'
...
- Adds 'supported: flash' to all NXP board .yaml
with enabled flash controller support.
- Sorts supported features alphabetically.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
7 months ago
a1dc0b8b3e
drivers: disk: sdmmc_subsys: remove CONFIG_SDMMC_VOLUME_NAME
...
Remove CONFIG_SDMMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the sdmmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
sdmmc-subsys disk driver, and change all in tree usage of the disk name
Fixes #75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
8 months ago
d885957fe8
boards: nxp: adopt new zephyr:board directive and role
...
This updates the documentation of all the NXP boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
9 months ago
82a192c8a9
boards: nxp: Removing CONFIG_PINCTRL from the boards defconfig
...
The Drivers using Pinctrl should be turning Pinctrl on
this should not be the responsibility of the board. This
commit removes CONFIG_PINCTRL from the boards side for nxp boards.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
9 months ago
a285b8a7b8
boards: nxp: frdm_k64f: use SW2 instead of SW3 for MCUboot
...
Use SW2 instead of SW3 for entering MCUboot serial recovery/USB DFU
mode. Holding SW3 during reset results in a NMI, causing the boot process
to halt.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
9 months ago
05d59f7207
boards: Set full_name for all boards
...
Full name was set based on the information available either in board
documentation or in Twister files.
Whenever applicable, vendor name was dropped from the full name so that
all boards have a consistent naming scheme.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
9 months ago
4511662fe5
boards: nxp: Add Serial Recovery button alias
...
Fixes MCUBoot Serial Recovery compilation error
"Serial recovery/USB DFU button must be declared
in device tree as 'mcuboot_button0'"
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
9 months ago
9a16b93868
samples: hello_world: use zephyr:code-sample directive
...
Adds missing code-sample directive to the Hello World sample in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
10 months ago
37fc9e26f2
boards: add new test supported feature usbd
...
We have recently added a new platform where the USB controller is only
supported in the new USB device support. This forces us to introduce a
new supported feature tag to distinguish the dependency. Use "usbd",
which is also the prefix of the new device support.
There are many boards that already have new driver support, but we will
replace the "usb_device" feature when the old device support is
deprecated.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
1 year ago
2e4e9a9494
dts: bindings: Fix KSZ8081 property names
...
Fix KSZ8081 binding properties:
- reset-gpios and interrupt-gpios are generally standard
properties and therefore should not be using a special name
- mc, is not the correct vendor prefix for microchip
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
1 year ago
0da71234e6
boards: nxp: kinetis: fix non-optimal sector distribution
...
- Optimize slot sizes for MCUBoot swap move algorithm
for frdm_k22f/k64f/k82f, twr_ke18f/kv58f220m,
hexiwear_mk64f12 and rddrone_fmuk66 boards.
- Use DT_SIZE_K/M macros for slot sizes.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
1 year ago
aed0fbf774
drivers: can: remove initial bus-speed/bus-speed-data properties
...
Remove all CAN controller "bus-speed" and "bus-speed-data"
properties. These all use the default bitrates set via Kconfig.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
1 year ago
5d2670ac1f
drivers: pwm: mcux_ftm: allow to select clock source
...
FTM internal counter can be clocked by one of three clock sources
independent of the module bus clock. This patch introduces a DT property
to perform the clock selection from DT.
DT sources are updated to keep the current clock selection for all boards,
with exception of ucans32k1sic board which is migrated to use system
clock by default, as this seems to be a better choice for most cases.
Some PWM LED samples require slower clock so overlays are added for
those cases.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
1 year ago
537d5c310c
dts: nxp: Convert ENET DT default to new binding.
...
Convert all of the NXP SOCs with ENET to use the new
binding scheme, which is used by the new driver.
Convert any boards using this SOC to the new scheme as well,
and remove from the documentation the bit about the experimental
nature of the new driver and the overlay that shall no longer exist.
Some of the boards I do not have the hardware of, so apologies
if something breaks, as I have no way to know. All the boards
were made sure to at least build.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
1 year ago
ac58f3abe6
drivers: nxp_enet: Generate MAC using eth.h
...
The MAC address macros are ridiculous in this driver.
Rewrite to be simpler and use eth.h common function.
Also, clarify the mac address generation on the DT overlays.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
1 year ago
25830e3828
boards: arm: Updated the board docs for pit
...
Updated the board documentation to reflect
the enablement of the PIT peripheral.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
1 year ago
8dc3f85622
hwmv2: Introduce Hardware model version 2 and convert devices
...
This is a squash of the ``collab-hwm`` branch which converts all
in-tree boards to hardware model version 2 including build system
changes, board updates and soc conversions.
This squash is a combination of the following commits:
ca214745a1 soc: Remove soc_legacy folder and move ARM Kconfig
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
1 year ago
Andrej Butok
Benjamin Cabé
Derek Snell
Arkadiusz Cholewinski
Stephanos Ioannidis
Manuel Argüelles
Daniel DeGrasse
Emilio Benavente
Henrik Brix Andersen
Johann Fischer
Declan Snyder
Torsten Rasmussen