zephyr

Commit Graph

Author	SHA1	Message	Date
Sylvio Alves	1df3403393	soc: esp32c6: add BLE support Add BLE support to ESP32-C6 series. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	2 weeks ago
Marek Matej	188eef484a	soc: espresssif: esp32c6: add iterable section header Fix subsystems build by providing the iterable section header. Signed-off-by: Marek Matej <marek.matej@espressif.com>	2 weeks ago
Raffael Rostagno	588c2e66e9	soc: esp32c6: Fix sleep routine PMU related functions need to be located in IRAM when sleep process is triggered, as cache is disabled past a certain point in the execution of the sleep process. Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>	1 month ago
Sylvio Alves	9857f114f8	linker: esp32: move regi2c_ctrl to iram This prevents boot lock up due to critical sections calls during bootloader stage. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	3 months ago
Lucas Tamborrino	c6f84d0ba2	boards: espressif: esp32c6: Add LP Core board support Add ULP Coprocessor board support for C6. This requires a change in the board qualifier depending on the build target. Update esp32c6 overlay and configuration files to the proper name. Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>	4 months ago
Sylvio Alves	b8c710d6c4	soc: espressif: fix chip revision reading Make sure chip revision reading returns real value for some especific chip revision, which is currently failing. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	4 months ago
Sylvio Alves	1903a8f415	soc: espressif: fix optimization flag boot fault When DEBUG_OPTIMIZATION or NO_OPTIMIZATION is enabled, efuse reading fails during bootloader start. Move those calls into IRAM area so that reading when cache is disabled works without any faults. In HAL side, we need to use low level calls to read CPU id instead of Zephyr's default one. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	4 months ago
Sylvio Alves	10860ecbba	soc: espressif: enable Wi-Fi/Bluetooth SW coexistence mgmt Update and enable Wi-Fi/Bluetooth software coexistence management. This improves package handling and is recommended to be used in high traffic scenarios. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	5 months ago
Marek Matej	6e6ab2f8ab	soc: espressif: Remove ESP heap and use heap adapter Remove ESP heap from the sources. System heap is default heap. Use heap adapter layer to configure used heap. Use MEM_POOL memory request config to Wi-Fi and Bluetooth drivers. Update the Wi-Fi and BLE memory needs. Signed-off-by: Marek Matej <marek.matej@espressif.com>	5 months ago
Marek Matej	d276cf753f	soc: espressif: Extend the program header Add new fields to the `esp_image_load_header_t` * provide IROM and DROM fields to fix debugging features * extend the header to up to 96 Bytes for future use Signed-off-by: Marek Matej <marek.matej@espressif.com>	6 months ago
Sylvio Alves	5d05e28fce	soc: espressif: keep RTC data after deep-sleep This PR includes changes in all Espressif's SoCs to enable keeping data in RTC memory after deep-sleep. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	6 months ago
Lucas Tamborrino	cdbd2b5558	soc: espressif: Add hardware initialization Bring hardware initialization to zephyr code base. Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>	8 months ago
Marek Matej	98d0a2bb34	soc: espressif: esp32c6 split cached area Split the cached area and assign both parts IROM and DROM meaning. This is necessary to overcome the esptool section merging issues. Signed-off-by: Marek Matej <marek.matej@espressif.com>	8 months ago
Sylvio Alves	c7a592b3e0	soc: esp32c6: add Wi-Fi support Enables Wi-Fi support. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	8 months ago
Sylvio Alves	a1a6e8a1a3	soc: esp32c6: update linker files Add new wifi sections into iram area. Add new functions to iram area. Remove unused entries. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	8 months ago
Marcio Ribeiro	7e7672cb4b	bugfix: esp32: allows QIO and QOUT flash modes Allows QIO and QOUT flash mode to work on: - esp32s2 - esp32s3 - esp32c2 - esp32c3 - esp32c6 Fixes #73677 Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>	9 months ago
Sylvio Alves	e48639e460	soc: esp32c6: add LLEXT linker entry Make sure LLEXT sections are properly placed to avoid orphan declaration. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	9 months ago
Marek Matej	a1c4552ea9	soc: esp32c6: Add runtime heap symbols Update the linker scripts to provide necessary symbols. Fix static allocation size check. Signed-off-by: Marek Matej <marek.matej@espressif.com>	10 months ago
Marcio Ribeiro	baf62b7a98	soc: esp32: XIP removed from Espressif targets The way ESP32 XIP works (with MMU and cache) does no fit the way Zephyr XIP is implemented, causing issues related to included Zephyr linker files. Flash code still resides in flash for execution, but MMU/Cache handles it in such way that XIP might not (or should not) be used with current Zephyr approach. To address this problem, XIP configuration option is being removed from Espressif targets. Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>	10 months ago
Sylvio Alves	0c5d5f796f	soc: espressif: disable RNG entropy before app runs SARADC was kept enabled to feed RNG entropy peripheral, adding instability to Wi-Fi connection. So we disable it before app runs as RNG driver already got initial entropy values. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	1 year ago
Sylvio Alves	f65770c1a1	soc: esp32xx: always use section prologue with alignment ESP32 requires proper alignment between sections. There are some scenarios, as reported in #74533, that the section can get shifted, causing runtime failure. Making sure SECTION_PROLOGUE is used with ALIGN_WITH_INPUT will guarantee its consistency. Fixes #74533 Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	1 year ago
Marek Matej	6a7c8d789f	soc: espressif: Update MCUboot segment size - Fix the build issues with the insufficient memory for the MCUboot. - Fix the sysbuild with MCUboot tests on all ESP32xx SoCs. Signed-off-by: Marek Matej <marek.matej@espressif.com>	1 year ago
Alberto Escolar Piedras	6e977ae2d5	lib c/cpp: Move .ctor .init_array handling from C++ to kernel * Move ctors and init_array from the CPP library to the kernel library, as this is common for both C and C++ and it is the kernel who is running it. * Rename the hidden kconfig option CPP_STATIC_INIT_GNU STATIC_INIT_GNU instead. * If STATIC_INIT_GNU is not selected verify there is constructors left behind. * Rename common-rom-cpp.ld to common-rom-init.ld * Rename z_cpp_init_static to z_init_static, and have the kernel always call it. Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no> Signed-off-by: Keith Packard <keithp@keithp.com>	1 year ago
Raffael Rostagno	9265c82313	soc: esp32c6: Kconfig and .ld updates, DTS and comments fix Kconfig, .ld and comments fixing Fixed address of UART1, WDT and RTC timer disabled by default Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>	1 year ago
Marek Matej	b3523c9bfa	soc: espressif: add esp32-c6 support Add basic support for esp32c6 SoC. Signed-off-by: Marek Matej <marek.matej@espressif.com>	1 year ago
Marek Matej	51e5f2d3e5	soc: espressif: esp32c3: reorder ROM sections This covers the cases described in common-rom-common-kernel-devices.ld Changing the order of .rodata and .text we prevents to create an overlapped segments issue. Signed-off-by: Marek Matej <marek.matej@espressif.com>	1 year ago
Mathieu Choplain	8aa6ae43ce	llext: add support for SLID-based linking This commit introduces support for an alternate linking method in the LLEXT subsystem, called "SLID" (short for Symbol Link Identifier), enabled by the CONFIG_LLEXT_EXPORT_BUILTINS_BY_SLID Kconfig option. SLID-based linking uses a unique identifier (integer) to identify exported symbols, instead of using the symbol name as done currently. This approach provides several benefits: * linking is faster because the comparison operation to determine whether we found the correct symbol in the export table is now an integer compare, instead of a string compare * binary size is reduced as symbol names can be dropped from the binary * confidentiality is improved as a side-effect, as symbol names are no longer present in the binary Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>	1 year ago
Marek Matej	213bad1de0	soc: espressif: add missing linker symbols Provide missing symbols to the default linker scripts. Signed-off-by: Marek Matej <marek.matej@espressif.com>	1 year ago
Marek Matej	f9008b5330	soc: espressif: esp32c3: simple boot support Add simplistic booting method which allows to run applications without the 2nd stage bootloader. - introduce memory layout header file - update and optimize default and mcuboot linker scripts - remove building multiple binaries during the application build Signed-off-by: Marek Matej <marek.matej@espressif.com>	1 year ago
Sylvio Alves	ad12a06e2e	soc: espressif: esp32c3: update to hal_espressif v5.1 Modify and reorganize SoC to meet updated hal. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com> Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>	1 year ago
Raffael Rostagno	b17712364c	drivers: systimer: Removed mention to ESP32C3 Removed mention to C3 SoC, so files are not SoC specific. Ready for C6 integration. Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>	1 year ago
Torsten Rasmussen	8dc3f85622	hwmv2: Introduce Hardware model version 2 and convert devices This is a squash of the ``collab-hwm`` branch which converts all in-tree boards to hardware model version 2 including build system changes, board updates and soc conversions. This squash is a combination of the following commits: ca214745a1 soc: Remove soc_legacy folder and move ARM Kconfig `f12cb0979f` scripts: ci: check_compliance: remove HWMv1 checks `1807bcf4d4` boards: mimx8mq_evk: port to HWMv2 `3ec2299c62` soc: nxp: port imx8mq SOC to HWMv2 `8ea02f4e63` boards: verdin_imx8mp: convert to HVMv2 `f2eb7652ce` boards: phyboard_pollux: move to HVMv2 `ab509a5ee0` boards: nxp: mimx8mp_evk: port M7 core to HWMv2 `06ad037f99` soc: nxp: imx8mp: port M7 core to HWMv2 `3f9e706859` boards: mimx8mm_phyboard: convert to HVMv2 `204372d264` boards: imx8mm_evk: port CM4 core to HWMv2 `f82c961a46` soc: nxp: imx8mm: port iMX8MM M4 core to HVMv2 `6987b2e305` boards: pico_pi: convert to HVMv2 `84484e6707` boards: warp7: convert to HWMv2 `ae443d1e3c` boards: meerkat96: port to HWMv2 `e3629c64e6` boards: colibri_imx7d: port to HWMv2 `fc835d893d` soc: nxp: convert iMX7 Dual core to HWMv2 `29ef2f23eb` boards: udoo_neo_full: convert to HWMv2 `fd49b1749e` soc: nxp: convert iMX6 SoloX core to HWMv2 `1e59b7a3fd` soc: nxp: imxrt11xx: only set CONFIG_CPU_HAS_FPU_DOUBLE_PRECISION for M7 `69bb0eb258` hwmv2: MAINTAINERS: Fix NXP maintainer yaml `1c4458890f` boards: firefly: roc_rk3568_pc: Fix SMP configuration `651a4370ad` boards: Fix variants and revisions `196cfda66d` tests/samples: Drop default revision identifiers `6ec6b1d75a` boards: Drop revision from twister identifiers for default revisions `b774cdd59f` scripts: utils: board_v1_to_v2: drop board_legacy prefix `7aa36e6640` boards: riscv: esp32c3_luatos_core: make usb variant `fe25709a9c` twister: add unit_testing soc and board `f88f211b4e` scripts: ci: check_compliance: improve the "not sorted" command `b21a455dfb` bluetooth: controller: Fix openisa checks `fdc76c48a7` workflow: compliance: Add rename limit `14ecafc67d` dts: bindings: vendor-prefixes: Sort entries `dbc366c3c7` soc: nxp: lpc: Move wrong configurations `8e02c08f96` maintainers: Fix invalid paths `b1b85e2495` boards: up: Fix spaces `58cc4013b3` maintainers: Fix xen path `66ce5c0b09` boards/soc: Add missing copyright headers `bb47243254` boards: qemu: x86: Remove pointless file `2e816a8a3a` samples: tests: update esp32-based board naming `9aeab17139` samples: tests: remove platform_exclude of esp32 boards `a4fe97b9de` boards: shields: m5stack_core2_ext: update board name `615fcab94a` samples: ipm_esp32: fix board labels and skip testing `7752f69b7f` boards: legacy: remove index entry for xtensa/riscv boards. `3eba827956` MAINTAINERS: update Espressif entries `914362bbd5` boards: xtensa: yd_esp32: Convert to v2 `a62278fd23` boards: xtensa: xiao_esp32s3: Convert to v2 `b6a11ccec4` boards: xtensa: olimex_esp32_evb: Convert to v2 `c1067c16d2` boards: xtensa: odroid_go: Convert to v2 `b8340b0109` boards: xtensa: m5stickc_plus: Convert to v2 `9d81e417be` boards: xtensa: m5stack_stamps3: Convert to v2 `c296672720` boards: xtensa: m5stack_core2: Convert to v2 `fada12aa9d` boards: xtensa: m5stack_atoms3_lite: Convert to v2 `fe37ebac1e` boards: xtensa: m5stack_atoms3: Convert to v2 `d32828fe6a` boards: xtensa: kincony_kc868_a32: Convert to v2 `5afba7855b` boards: xtensa: heltec_wireless_stick_lite_v3: Convert to v2 `ca48c17723` boards: xtensa: heltec_wifi_lora32_v2: Convert to v2 `db1fd4d229` boards: xtensa: esp32s3_luatos_core: Convert to v2 `a78b2552eb` boards: xtensa: esp32s3_devkitm: Convert to v2 `cc96061d96` boards: xtensa: esp32s2_saola: Convert to v2 `ed854e05d1` boards: xtensa: esp32s2_lolin_mini: Convert to v2 `4fa1ae8110` boards: xtensa: esp32s2_franzininho: Convert to v2 `5543040a18` boards: xtensa: esp_wrover_kit: Convert to v2 `2335ae79b3` boards: xtensa: esp32_ethernet_kit: Convert to v2 `f910b7ad4f` boards: xtensa: esp32_devkitc_wrover: Convert to v2 `32104db555` boards: xtensa: esp32_devkitc_wroom: Convert to v2 `e23a41200d` boards: riscv: icev_wireless: Convert to v2 `3c670e4e53` boards: riscv: xiao_esp32c3: Convert to v2 `fc7c6a060b` boards: riscv: stamp_c3: Convert to v2 `22c2edb89c` boards: riscv: esp32c3_luatos_core: Convert to v2 `0a96dcb778` boards: riscv: esp32c3_devkitm: Convert to v2 `be1ee1c446` vendors: update vendors lists `5e6c62137f` soc: espressif_esp32: Port to HWMv2 `037a3b52a4` boards: Raspberry Pi pico pwm led adjustment `7277cae6fa` samples: blinky_pwm: enable pwm_leds in rpi_pico overlay `da3e49d34e` boards: nxp: update selection of FLASH_MCUX_FLEXSPI_XIP_MEM_TARGET `bc8424dd3b` soc: nxp: imxrt: move FLASH_MCUX_FLEXSPI_XIP_MEM_TARGET to SOC level `041cb52939` soc: brcm: bcm_vk: Rename to bcnvk `576b43a95c` soc: Fix SOC_FAMILY name mismatches `e8f3e6494d` hwmv2: boards: intel: adsp: Fix runner after paths renamed `550399e927` boards: weact: stm32g431_core: Add wrongly deleted file back `08708c909e` tests: drivers: flash: Renamed missed board rename `06dac41e68` hwmv2: Convert Seagate Faze board to hwmv2 `dd8f842b40` hwmv2: nxp: update MAINTAINER paths for hwmv2 `b4d1c04978` hwmv2: lpc: updated overlay and conf files in samples and tests `067c69089e` boards: nxp: convert lpcxpresso55s69 to hwmv2 `097205b40a` hwmv2: Global fix of lpc54114_m4 overlay and conf files `d8cfa6fb29` boards: nxp: convert lpcxpresso54114 to hwmv2 `c29ed228c6` boards: nxp: convert lpcxpresso55s36 to hwmv2 `88cfd3d6ac` boards: nxp: convert lpcxpresso55s28 to hwmv2 `ad30c940ee` boards: nxp: convert lpcxpresso55s16 to hwmv2 `9e5a10ec80` boards: nxp: convert lpcxpresso55s06 to hwmv2 `5650c83268` boards: nxp: convert lpcxpresso51u68 to hwmv2 `82cf44be45` boards: nxp: convert lpcxpresso11u68 to hwmv2 `1a9c405a6f` soc: nxp: convert LPC SOC family to hardware model V2 `f2b536d253` boards: intel: doc: hwmv2: Fix some renamed paths `5ee6058710` samples/tests: Use board revisions `b76687602f` boards: Add yaml files for boards missing revisions `32ae4918d0` boards: nordic: Fix board names `cc1dabca65` MAINTAINERS: Update for renamed folders `a37ddce659` soc: xilinx: Rename to xlnx `a1393a07f6` soc: xenvm: Rename to xen `813ed00f67` soc: raspberry_pi: Rename to raspberrypi `71317d6798` soc: cadence: Rename to cdns `8cb0c51ec6` soc: broadcom: Rename to brcm `2b9db15c69` soc: andes: Rename to andestech `0101216ce1` soc: altera: Rename to altr `4b4c3ca65d` boards: wurth_elektronik: Rename to we `cdc3ef499f` boards: ublox: Rename to u-blox `cabdd4ad05` boards: space_cubics: Rename to sc `4b5bd7ae8a` boards: seeed_studio: Rename to seeed `a992785ceb` boards: raspberry_pi: Rename to raspberrypi `3c1cdc20fe` boards: laird_connect: Rename to lairdconnect `291c7cde2b` boards: cadence: Rename to cdns `95db897526` boards: broadcom: Rename to brcm `0a47b94879` boards: beagleboard: Change to beagle `9f9f221c24` boards: andes: Rename to andestech `e7869ca38a` boards: altera: Rename to altr `bf2fb5eca3` various: Change SOC_FAMILY_NRF to SOC_FAMILY_NORDIC_NRF `e25730ba56` modules: tf-m: Rename from nordic_nrf to nordic `9e3466606a` boards: nordic_nrf: Rename to nordic `09a398dcc8` soc: nordic_nrf: Rename to nordic `cb8ffc74f8` boards: renode: Add documentation index `2291ff4b55` boards: arm: riscv32_virtual: Convert to v2 `484b7f1996` soc: riscv_renode_virtual: Port to HWMv2 `cc5c2fb0c7` soc: raspberry_pi: Fix SOC_SERIES and SOC mismatch `59cb580513` soc: arm: designstart: Fix SOC_SERIES and SOC mismatch `aa9e0de7af` samples: Fix invalid links `a1480cf1cf` maintainers: Fix paths `0d719e004b` boards: Update documentation links `eb5c3e6f79` boards: wurth_elektronik: Drop duplicate prefix `a34a3640b7` boards: waveshare: Drop duplicate prefix `cf50e950e7` boards: weact: Drop duplicate prefix `737cfb548f` boards: sparkfun: Drop duplicate prefix `505494c97a` boards: segger: Drop duplicate prefix `4eaf69f37a` boards: ruuvi: Drop duplicate prefix `a1335caeae` boards: ronoth: Drop duplicate prefix `a9f7f30bf6` boards: raytac: Drop duplicate prefix `80db4c81b3` boards: qemu: Drop duplicate prefix `433d7e9976` boards: particle: Drop duplicate prefix `4ea79d19e7` boards: olimex: Drop duplicate prefix `fd4ae6f6a8` boards: mikroe: Drop duplicate prefix `36080549bd` boards: khados: Drop duplicate prefix `169bf8ae1d` boards: intel: Drop duplicate prefix `25f04d5222` boards: holyiot: Drop duplicate prefix `11c2af0de8` boards: google: Drop duplicate prefix `d5128f4016` boards: ebyte: Drop duplicate prefix `44fbc68cad` boards: dragino: Drop duplicate prefix `f7fe431b44` boards: contextual_electronics: Drop duplicate prefix `9094fea63b` boards: circuit_dojo: Drop duplicate prefix `b632acc1fc` boards: blue_clover: Drop duplicate prefix `1a3316ebdc` boards: bbc: Drop duplicate prefix `71c0344f8c` boards: arduino: Drop duplicate prefix `f0176fc25f` boards: altera: Drop duplicate prefix `36b920ed0f` boards: adi: Drop duplicate prefix `22520368d9` boards: adafruit: Drop duplicate prefix `296acfb2bc` boards: actinius: Drop duplicate prefix `55063380b7` boards: 96boards: Drop duplicate prefix `1f93394b55` boards: nxp: convert mimxrt595_evk to hardware model v2 `e7a4fd2ec1` soc: nxp: rt5xx: convert RT5xx SOC to HWMv2 `01942f1d11` twister: normalize platform name when storing files/data `477c8b84dd` twister: tests: test with slashes in platform names `64e3e816c4` soc: Add include guards `3a7aa2fa49` gitignore: update the compliance file list `84e1c17ad9` scripts: ci: check_compliance: add a check for board yml file `a90f53ad57` boards: sync up the vendor tags and vendor-list `af9aa65299` dts: vendor-prefixes: add keep-sorted markers `50f0bf05a3` dts: vendor-prefixes: sort the vendor list `a10b614aa4` dts: vendor-prefixes: ensure all prefixes are lowercase `5abe735e93` manifest: update SOF sha for NXP HWMv2 `9ab8f64ca9` modules: rename SOC_FAMILY_IMX `483ff8dd4d` modules: mcux: remove SOC_FAMILY_NXP_ADSP `f113dd5342` samples: update board name `39b31287d9` boards: nxp: Convert i.MX ADSP boards to hardware model v2 `1511e356a2` soc: nxp: Port i.MX ADSP family to hardware model v2 `c91e25ab47` soc: mec: rename all mec1501x reference to mec15xx `1c231fd939` hwmv2: boards: Convert IMXRT boards `417cff1e60` hwmv2: soc: Port IMXRT family to HWMV2 `28d4e41b1b` hwmv2: clean up arm64 soc and board empty directory `2b520f83cb` hwmv2: port NXP SoC LS1046A to V2 `bf7899c645` hwmv2: port nxp_ls1046ardb board to V2 `33f7b61866` samples/tests: Rename numaker boards `8f20ea6e93` boards: nuvoton: numaker_pfm: Split into 2 boards `7cf4ff43a1` drivers: pinctrl: imx: align with hwm v2 `c68e1fea4e` drivers: clock_control: ccm_rev2: align with hwm v2 update `3b49014a0f` hwmv2: move imx8mn EVK board to V2 `14f344eeab` hwmv2: move imx8mp EVK board to V2 `40f3f8f22d` hwmv2: move imx8mm EVK board to V2 `10bf79ea51` hwmv2: move imx8m soc for a-core to V2 `8727d5ca80` hwmv2: move imx93 EVK board to V2 `c81ef01563` hwmv2: move imx93 soc to V2 `5836c1b699` modules: mcux: introduce CONFIG_MCUX_CORE_SUFFIX `338f6f2bf1` doc: update board porting guide to match new hardware model `9639a1b5dc` soc: silabs: drop useless defconfigs `981807444e` soc: silabs: introduce SOC_GECKO_SDID `5d07e82485` soc: silabs: SOC_FAMILY_* replace SOC_GECKO_SERIES* `2fd081ac86` soc: silabs: align comments with soc tree `66d425f571` soc: silabs: split in families `5bd38f47a9` arch: arch: kconfig: Fix wrong placement of endmenu `00c6ef25be` tests/samples: Rename overlay files for renamed boards `0c639b8378` boards: Fix bools and selections `c2ef907d1d` drivers: flash: it8xxx2: Add missing Kconfigs `553de2ebc9` soc: ite: ec: it8xxx2: Fix SOC_SERIES being in wrong file `b8ec0080c2` boards: Documentation link fixes `eb7025e50f` tests: Update board names for hwmv2 `10ef3d4bd2` boards: silab: Add documentation index file `ba9fdaa1d6` boards: arm: efr32_radio: Convert to v2 `86c8d4a0ca` boards: arm: efm32pg_stk3402a: Convert to v2 `575ac5cafb` manifest: Update hal_silabs `87b2907304` boards: arm: efr32_thunderboard: Convert to v2 `14b30055ab` boards: arm: efr32mg_sltb004a: Convert to v2 `0012bfc15d` boards: arm: efr32xg24_dk2601b: Convert to v2 `f526225ead` boards: arm: efm32wg_stk3800: Convert to v2 `19e7df29df` boards: arm: efm32pg_stk3401a: Convert to v2 `0bd7d963d6` boards: arm: efm32hg_slstk3400a: Convert to v2 `795a90f9bf` boards: arm: efm32gg_stk3701a: Convert to v2 `43d5540be7` boards: arm: efm32gg_slwstk6121a: Convert to v2 `065148d856` boards: arm: efm32gg_sltb009a: Convert to v2 `1dc9a8aa17` soc: silabs_exx32: Port to HWMv2 `763571e878` tests: Expand names `dae301b8a3` boards: xen: xenvm: Expand name `19e60eef36` boards: qemu: qemu_cortex_a53: Expand names `a0a7c30f28` soc: intel: intel_adsp: Fix issues `df9a4223fe` scripts: ci: introduce soc name check in check_compliance `ed401abaff` soc: emsdsp: align SoC name defined in soc.yml to Kconfig SOC setting `fc78e5eaa4` MAINTAINERS: update RISC-V arch area paths `4e586958ff` boards: convert QEMU RISC-V 64 bit board to Zephyr HWMv2 `f4c31a2b86` boards: convert QEMU RV32E board to Zephyr HWMv2 `5b2ffc652b` boards: convert QEMU RISC-V 32 bit board to Zephyr HWMv2 `5db061a4c6` soc/riscv: convert the QEMU virt RISCV-32 SoC to HWMv2 `6547845e9d` boards: convert SparkFun RED-V Things Plus to Zephyr HWMv2 `95a1f96399` boards: convert SiFive HiFive Unmatched to Zephyr HWMv2 `e563eb0a62` soc/sifive/sifive_freedom: add SiFive Freedom FU740 SoC `8914bc58b6` boards: convert SiFive HiFive Unleashed to Zephyr HWMv2 `7e8de1e781` soc/sifive/sifive_freedom: add SiFive Freedom U540 SoC `bfcc2ed18f` boards: convert SiFive HiFive1 Rev. B to Zephyr HWMv2 `330fc38f9f` boards: convert SiFive HiFive1 to Zephyr HWMv2 `b9e06f4c38` soc/sifive/sifive_freedom: add SiFive Freedom E310 SoC `4b90b30b9d` scripts: west_commands: completion: Add hwmv2 complete to fish `0f6842e2fa` scripts: west_commands: completion: Add hwmv2 complete to zsh `b2af1e1737` scripts: west: list_boards: Fix hwmv2 output `686a4b78b8` scripts: west_commands: completion: Add hwmv2 complete to bash `396b6bb856` soc: nxp: fix typo in SoC name `765299c627` soc: broadcom: align SoC names defined in soc.yml to Kconfig SOC setting `7efd46eb41` soc: arm: align SoC names defined in soc.yml to Kconfig SOC setting `505cbc5c42` soc: mec: align SoC names defined in soc.yml to Kconfig SOC setting `951a140701` soc: ti: define SOC name in Kconfig `a795d28810` snippets: Initial HWMv2 support `f9a957e6f6` boards: nordic: nrf9160dk: Fix missing nrf52840 config `df994e7ee8` soc: xilinx: zync7000: Remove xilinx from soc series name `8dfabd56ca` soc: cypress: Add protection guard to file `447b951593` tests: kernel: tickless: Remove old board name `bad5dfa71f` boards: nordic: nrf5340dk: Fix board names `ad2e863f39` soc: atmel: Use new family prefix `3f08e714b2` soc: intel_adsp: hwmv2: Align SOC_SERIES_INTEL_ACE name and value `6734597a76` soc: intel_adsp_cavs: hwmv2: Align SOC_SERIES name and value `2908af0bcc` boards: nrf51dk/dongle: change SoC to nRF51822 `d1ceb29fca` soc: align CONFIG_SOC values to match soc.yml names `4768ccaf70` tests: drivers: gpio: gpio_api_1pin: exclude hifive1 `ebdb0879ad` boards: nxp: s32z2xxdc2: convert to hwmv2 `ae82580d08` boards: nxp: mr_canhubk3: convert to hwmv2 `c5f0defbae` boards: nxp: ucans32k1sic: convert to hwmv2 `1e46cabce6` soc: nxp: convert NXP S32 family to hwmv2 `f2f85133f2` soc: stm32: Rename series path `86642f4e78` soc: stm32: Rename Kconfig SOC_SERIES symbols `c61e807896` soc: stm32: Cleanup Kconfig.defconfig files `ca46c8abc9` tests: Fix board names `fbfed5f48f` maintainers: Update synopsys entries `8cd8b1cc47` boards: synopsys: Add documentation index `6f6cc57a04` boards: arc: hsdk4xd: Convert to v2 `c4c14a54ca` soc: snps_arc_hsdk4xd: Port to HWMv2 `06c2054e5c` boards: arc: iotdk: Convert to v2 `ff0e0fce1b` soc: snps_arc_iot: Port to HWMv2 `334264c46a` boards: arc: emsdp: Convert to v2 `8b947a0e91` soc: snps_emsdp: Port to HWMv2 `990417bbde` tests: Update board names for hwmv2 `e12719154a` boards: arc: em_starterkit: Convert to v2 `437a430fbe` soc: snps_emsk: Port to HWMv2 `f93387f968` boards: arc: hsdk: Convert to v2 `1cf2498b13` soc: snps_arc_hsdk: Port to HWMv2 `47abe81256` boards: arc: nsim: Convert to v2 `1e33786dc4` soc: snps_nsim: Port to HWMv2 `7f081914db` boards: arc: qemu_arc: Convert to v2 `bc97349dbd` soc: snps_qemu: Port to HWMv2 `a9902ff58e` boards: Use zephyr_file for file links `126e1a4e72` boards: Fix invalid documentation links `899f0257c3` boards: stm32wb: Restore missing .defconfig files `790c10b1ee` soc: x86/atom: imply mmu, do not select it `faee62088d` boards: x86: remove qemu_x86_tiny_768 `c34d186a57` x86: atom: remove soc.h with unused content `1be3a9e9d3` x86: remove legacy ia32, use atom instead `60e6b400f9` boards: qemu: move qemu_x86 -> x86 `c4fbac27e8` boards: infineon: Add documentation index `b4dd29a9c4` maintainers: Update paths for hwmv2 `380f5fdb2b` boards: cypress: Add documentation index `9de981be05` boards: arm: xmc47_relax_kit: Convert to v2 `6394e8a348` boards: arm: xmc45_relax_kit: Convert to v2 `04dbf17e19` soc: xmc_4xxx: Port to HWMv2 `c9731f1bce` boards: arm: cy8cproto_063_ble: Convert to v2 `53d41869d1` boards: arm: cy8cproto_062_4343w: Convert to v2 `46c4f01427` boards: arm: cy8ckit_062s4: Convert to v2 `d285e19cf2` boards: arm: cy8ckit_062_wifi_bt: Convert to v2 `2bebd7298c` boards: arm: cy8ckit_062_ble: Convert to v2 `af243274c2` soc: psoc6 and psoc_6: Port to HWMv2 `105a2bae84` cmake: modules: boards: Fix board deprecation for HWMv2 `dca54e000a` cmake: modules: boards: Enhance board aliases for HWMv2 `fc314e8e3f` cmake: modules: boards: Fix BOARD_ALIAS `9a7c2ce6d5` soc: gaisler: Move Kconfig file `1ac56d0501` soc: soc_legacy: mips: Remove out file `c054381a7a` boards: adjust few boards/ paths `4d93b8d9fd` boards: convert all microchip MEC boards to hwmv2 `ab2fcb1245` soc: convert microchip_mec to hwmv2 `ead4b57a7b` soc: arm64: intel_socfpga: hwmv2: Rename SoCs `d4c143d306` MAINTAINERS: intel_socfpga: Adjust to HWMv2 move `70a66ac03a` boards: arm64: intel_socfpga: Move boards to subdirectories `8a85c07799` boards: arm64: intel_socfpga_agilex5_socdk: move to HWMv2 `8c253a99fc` boards: arm64: intel_socfpga_agilex_socdk: move to HWMv2 `ab883b8019` soc: arm64: intel_socfpga: Move and convert to HWMv2 `7c8b7a153b` soc: arm: intel_socfpga_std: Rename with HWMv2 `8dc2b911f6` soc: board: intel_socfpga_std: Align names to 'Cyclone V' `402366117a` soc: arm: intel_socfpga_std: Align board subdirectory `f0a8d12745` boards: arm: cyclonev_socdk: Move to HWMv2 `2271f17a86` soc: arm: intel_socfpga_std: Move and convert to HWMv2 `841c2a9d99` boards: riscv: beaglev_fire: Convert to v2 `3b314531ab` boards: riscv: mpfs_icicle: Convert to v2 `d4ea2bf70b` boards: riscv: m2gl025_miv: Convert to v2 `5256e9fcc3` soc: microchip_miv: Port to HWMv2 `18e5cf1d51` maintainers: Update path for hwmv2 `eab8628f98` boards: arm: qemu_cortex_m3: Convert to v2 `1532f2fee1` soc: ti_lm3s6965: Port to HWMv2 `430ca6a475` maintainers: Update ambiq paths `a9b9b41b91` boards: ambiq: Add index `db0271ecbb` boards: arm: apollo4p_blue_kxr_evb: Convert to v2 `957e2b2061` boards: arm: apollo4p_evb: Convert to v2 `5a90a44454` soc: ambiq: Port to HWMv2 `a20c113fbd` boards: nxp: convert ip_k66f to hwmv2 `34e3852a54` boards: nxp: convert usb_kw24d512 to hwmv2 `20ad604de6` boards: nxp: convert twr_kv58f220m to hwmv2 `2e2a7b7656` boards: nxp: twr_ke18f: convert to hwmv2 `f7dcc2eb5e` boards: nxp: convert rddrone_fmuk66 to hwmv2 `b58e90a2e9` boards: nxp: convert hexiwear to hwmv2 `aae6e9e454` boards: nxp: frdm_kw41z: convert to hwmv2 `1d3baac2d6` boards: nxp: convert frdm_kl25z to hwmv2 `3b1d21483f` boards: nxp: frdm_k82f: port to hwmv2 `6046e6ded9` boards: nxp: port frdm_k64f to hwmv2 `0a7bf9fd79` boards: nxp: port frdm_k22f to hwmv2 `dce697c823` boards: nxp: add toctree placeholder `666a353409` soc: nxp: kinetis: convert kinetis SOC family to hardware model V2 `89f0a6034b` maintainers: Update paths for renesas boards/socs `004bd43c48` tests/samples/snippets: Update board names for hwmv2 `a6d756923d` boards: arm and arm64: rcar_h3ulcb: Convert to v2 `3801216b8d` boards: arm64: rcar_salvator_xs_m3: Convert to v2 `b7cc30aaea` boards: arm: rcar_h3_salvatorx_cr7: Convert to v2 `866427ea29` boards: arm: arduino_uno_r4: Convert to v2 `2689b3f0ee` soc: ra: Port to HWMv2 `e7ebc727c8` boards: arm: da1469x_dk_pro: Convert to v2 `903265b2bb` boards: arm: da14695_dk_usb: Convert to v2 `529a78ed51` soc: smartbond: Port to HWMv2 `97cf636ae0` boards: arm: rcar_spider_cr52: Convert to v2 `6d0c53f3a1` soc: rcar: Port to HWMv2 `44e0aa0668` soc: renesas: rzt2m: Move folder structure for more SoCs `85238fc205` boards: misc: Fixed STM32 based boards doc links `dffc08af56` boards: riscv: niosv_m: move and convert to HWMv2 `545093abe4` boards: riscv: niosv_g: move and convert to HWMv2 `ecfa192f1b` soc: riscv: intel_niosv: move and convert to HWMv2 `fd1e8cdc30` hwmv2: sof: intel_adsp: submanifest provisional link `8bf067e625` doc: boards: intel_adsp: Re-order pages `4833275ccd` MAINTAINERS: intel_adsp: Adjust to HWMv2 move `b9a70e5ea2` soc: intel_adsp: tools: pylint compliance workaround `18c70cc4bf` hwmv2: tests: boards: intel_adsp: Adjust board names `ca52baf9de` hwmv2: boards: intel_adsp: Overhaul board configurations `d1b3bcce64` soc: boards: xtensa: intel_adsp_ace: Rename with HWMv2 `f362a8ae2c` doc: soc: boards: intel_adsp_cavs25: Rename with HWMv2 `51dee5da92` tests: samples: boards: intel_adsp_cavs25: Rename with HWMv2 `e66c35e0d0` boards: xtensa: intel_adsp_cavs25: Rename board with HWMv2 `d1491a4810` soc: boards: xtensa: intel_adsp_cavs25: Rename with HWMv2 `fa0fca79c4` scripts: west: runners: intel_adsp: Adjust path to HWMv2 `acd18bfaf7` boards: xtensa: intel_adsp_ace20_lnl: move and convert to HWMv2 `546c94b958` boards: xtensa: intel_adsp_ace15_mtpm: move and convert to HWMv2 `8aab718c3e` boards: xtensa: intel_adsp_cavs25_tgph: change to board variant `30f17424a4` boards: xtensa: intel_adsp_cavs25: move and convert to HWMv2 `35a97cb524` soc: xtensa: intel_adsp: HWMv2 workaround for SOF config `fdc20fdff6` soc: xtensa: intel_adsp: move and convert to HWMv2 `22dc2b6391` cmake: improved board handling for revisions `2f1e33a2e6` cmake: improve arch error message for invalid arch selection `c47c37d3db` sample: basic: blinky_pwm: Exclude rpi_pico w variant `7a788b9a18` boards: raspberry_pi: rpi_pico: Use full name for w variant `7046b92d41` tests: atmel_sam: adc: Fix sam4e_xpro adc build `253ee9638c` tests: atmel_sam0: Update platform name `ccb4c63324` samples: atmel_sam0: Update platform name `2d4acf9230` boards: arduino_nano_33_iot: Convert to HWMv2 `a60d28969a` boards: arduino_mkrzero: Convert to HWMv2 `0409e51d3f` boards: arduino_zero: Convert to HWMv2 `1b2528df1b` boards: wio_terminal: Convert to HWMv2 `af1096e7ca` boards: ev11l78a: Convert to HWMv2 `0b1db9c53d` boards: adafruit_trinket_m0: Convert to HWMv2 `e9874671e2` boards: adafruit_itsybitsy_m4_express: Convert to HWMv2 `ba6c014071` boards: adafruit_grand_central_m4_express: Convert to HWMv2 `33ad4a51ca` boards: adafruit_feather_m0_lora: Convert to HWMv2 `9812f3d54e` boards: adafruit_feather_m0_basic_proto: Convert to HWMv2 `c76b1fbeca` boards: serpente: Convert to HWMv2 `649789e433` boards: seeeduino_xiao: Convert to HWMv2 `6b3bdb7364` boards: same54_xpro: Convert to HWMv2 `93dda5ee4b` boards: samr34_xpro: Convert to HWMv2 `e48e1f5d5b` boards: samc21n_xpro: Convert to HWMv2 `f11cf73df1` boards: saml21_xpro: Convert to HWMv2 `ac73ed6dcd` boards: samd20_xpro: Convert to HWMv2 `0fdbe3552e` boards: samd21_xpro: Convert to HWMv2 `854cff3905` boards: samr21_xpro: Convert to HWMv2 `a87ea5bc0a` soc: atmel: sam0: Port to HWMv2 `706e5d27cd` boards: riscv: neorv32: Convert to v2 `d1edcdd088` soc: neorv32: Port to HWMv2 `0f7add89ca` boards: native_sim/posix: Add 64bit versions as variants `b6edad8d68` soc: soc_legacy: remove the arm/st_stm32 folder `c58e0822a6` boards: Convert nucleo_f207zg to HWM v2 `b987093a80` soc: v2: stm32: Migrate STM32F2 series `2096fd4652` samples: bluetooth: hci_uart: Fix wrongly converted board names `830f9c5a82` MAINTAINERS: Update Atmel entries `527cd9d8cd` CODEOWNERS: Update Atmel entries `83af7d0c1c` samples: atmel_sam: Update platform name `fd9b84d457` tests: atmel_sam: Update platform name `3c72fe863c` boards: arduino_due: Convert to HWMv2 `37dfacbf9e` boards: RoboKit1: Convert to HWMv2 `1108d7b0ed` boards: sam_v71_xult: Convert to HWMv2 `bed44a5c28` boards: sam_e70_xplained: Convert to HWMv2 `40448c5a9f` boards: sam4s_xplained: Convert to HWMv2 `31273692c0` boards: sam4l_ek: Convert to HWMv2 `35b5d33ef0` boards: sam4e_xpro: Convert to HWMv2 `3b84b9910a` soc: atmel: Port SAM family to HWMv2 `da00d0e7b9` boards: Convert nucleo_wba55cg to HWM v2 `fb2103f89e` boards: Convert nucleo_wba52cg to HWM v2 `1f9a533fbc` soc: st: stm32: Migrate STM32WBA series `3f92f65b28` boards: fix documentation for alientek and blues boards `7646b74aaf` boards: stm32l4: doc: add zephyr_file to defconfig path `fea54ddcd9` boards: Convert adi_eval_adin2111ebz to HWM v2 `d47f1878b1` boards: Convert adi_eval_adin1110ebz to HWM v2 `ae42be236b` boards: Convert swan_r5 to HWM v2 `83bd1a9ecc` boards: Convert stm32l4r9i_disco to HWM v2 `39c26f09ed` boards: Convert stm32l496g_disco to HWM v2 `29d03c970b` boards: Convert stm32l476g_disco to HWM v2 `74acec315c` boards: Convert sensortile_box to HWM v2 `fee6d8676e` boards: Convert pandora_stm32l475 to HWM v2 `008b5d9392` boards: Convert nucleo_l4r5zi to HWM v2 `24e357d623` boards: Convert nucleo_l4a6zg to HWM v2 `2c5f9dcce0` boards: Convert nucleo_l496zg to HWM v2 `4da061646f` boards: Convert nucleo_l476rg to HWM v2 `15956a69b8` tests: drivers: flash: stm32: update platform name `80324f7707` boards: Convert nucleo_l452re_p to HWM v2 `9893e0d111` boards: Convert nucleo_l452re to HWM v2 `46f92b227b` boards: Convert nucleo_l433rc_p to HWM v2 `ed5d1bb4cd` boards: Convert nucleo_l432kc to HWM v2 `325f95ec20` boards: Convert nucleo_l412rb_p to HWM v2 `d055676307` boards: Convert disco_l475_iot1 to HWM v2 `c7a415d92c` boards: Convert b_l4s5i_iot01a to HWM v2 `d15144f582` soc: st: stm32: Migrate STM32L4 series `a63ff71bcb` boards: nrf_bsim: Add new nrf5340 board definitions `b53c6f412c` boards: nrf_bsim: Remove redundant option setting `83eb4fc069` MAINTAINERS: intel_ish: Adjust to HWMv2 move `715685b19f` boards: x86: intel_ish: move and convert intel_ish boards to HWMv2 `5b9ef94106` soc: x86: intel_ish: move and convert to HWMv2 `12b297707a` boards: Convert stm32wb5mmg to HWM v2 `cdcea932bc` boards: Convert stm32wb5mm_dk to HWM v2 `0a3ae2b223` boards: Convert nucleo_wb55rg to HWM v2 `20b4ce17d5` soc: st: stm32: Migrate STM32WB series `47c65400d6` soc: st: stm32: fix stm32l0 family `59ec56f9e6` boards: Convert stm32h573i_dk to HWM v2 `dc5977dbba` boards: Convert nucleo_h563zi to HWM v2 `a6e4928543` soc: st: stm32: Migrate STM32H5 series `99f248e048` soc: stm32u5: Fix references after conversion to hw modelv2 `15f16834e6` boards: Convert stm32u5a9j_dk to HWM v2 `c1ee449ef1` boards: Convert sensortile_box_pro to HWM v2 `db4deddf9d` boards: Convert nucleo_u5a5zj_q to HWM v2 `2fd3ed43d2` boards: Convert nucleo_u575zi_q to HWM v2 `902fceb173` boards: Convert b_u585i_iot02a to HWM v2 `d716ca1a10` soc: st: Migrate stm32u5 series to new hw model `b7abc89428` hwmv2: boards: x86: doc: Adjust common docs to new locations `69b334f54b` MAINTAINERS: Change paths to native and nrfbsim boards `614611a528` boards: nrf_bsim: Convert to HW model v2 `5821b9ec2e` board: native_sim/posix: Convert to hwmv2 `04cbad174e` soc: native: Convert to HWMv2 `24ca0febfc` boards: nrf_bsim: Fix path to pinctrl_soc.h `9a32559a2d` cmake: FindHostTools: Fix for hwmv2 for host based targets `c4b11e0251` boards: longan_nano: port to HWMv2 `97edd05be3` boards: gd32vf103c_starter: port to HWMv2 `9cf624c410` boards: gd32vf103v_eval: port to HWMv2 `b40bf25e5e` soc: gd_gd32: reorganize folders `71600d7e95` soc: gd_gd32: move pinctrl_soc.h content back to soc folder `2bd84a1bc5` soc: gd_gd32: port gd32vf103 series to HWMv2 `9dc342143b` boards: doc: fix a bunch of broken reference `10392d693d` doc: boards: split out shields `b2def8ed3a` boards: acrn: fix title `bf7d3efe78` boards: riscv: tlsr9518adk80d: Convert to v2 `c579770e1d` soc: telink_tlsr: Port to HWMv2 `9131540109` soc: stm32h7: Couple of tests fixes following migration `2efcefc089` boards: Convert stm32h7b3i_dk to HWM v2 `d9b295a85b` boards: Convert stm32h750b_dk to HWM v2 `a2f56bdcd5` boards: Convert stm32h747i_disco to HWM v2 `00314155df` boards: Convert stm32h735g_disco to HWM v2 `b08819dff7` boards: Convert nucleo_h7a3zi_q to HWM v2 `56456c16e5` boards: Convert nucleo_h753zi to HWM v2 `91f9198dc4` boards: Convert nucleo_h745zi_q to HWM v2 `96f1bafbf9` boards: Convert nucleo_h743zi to HWM v2 `b290f25baa` boards: Convert nucleo_h723zg to HWM v2 `9fbe6bf191` boards: Convert fk7b0m1_vbt6 to HWM v2 `44bcfe57c7` boards: Convert arduino_portenta_h7 to HWM v2 `4c86af7eae` boards: Convert arduino_opta_m4 to HWM v2 `b4f852f738` boards: Convert arduino_giga_r1 to HWM v2 `bac9789264` soc: st: Migrate stm32h7 series to new hw model `a954e1722d` boards: stm32l0: Cleanup board _defconfig files after migration `7e8515b241` boards: Convert ronoth_lodev to HWM v2 `25246c21ef` boards: Convert nucleo_l073rz to HWM v2 `09396eb2e6` boards: Convert nucleo_l053r8 to HWM v2 `70c004fd83` boards: Convert nucleo_l031k6 to HWM v2 `e3daa98e79` boards: Convert nucleo_l011k4 to HWM v2 `a2de60c6da` boards: Convert dragino_nbsn95 to HWM v2 `e877ce9cec` boards: Convert dragino_lsn50 to HWM v2 `2b50218c23` boards: Convert b_l072z_lrwan1 to HWM v2 `4a65f55916` soc: st: Migrate stm32l0 series to new hw model `cc6e6be01f` boards: fix few leftover ITE board references `a837303268` soc: stm32: Protect Kconfig symbols by SOC_FAMILY_STM32 `88e5959f17` hwm2: Fix unit_testing: it is also a legacy board by now `95e06e8663` cmake: Fix uses of old SOC path `d517d3cc24` soc: set linker script for ra4m1 `68f9aeddab` soc: ite: add SOC_SERIES_ITE_IT8XXX2 guards around ITE options `ccf4f48f01` boards: convert ite boards to hwmv2 `4a6e286a3b` soc: convert ite_ec to hwmv2 `12e375f826` doc: handle arch / soc / board docs in new hardware model `b4db917de9` boards: Add documentation index files `d6e0d27efe` samples: bluetooth: hci_uart: Fix wrong named files `bc16a7a727` tests: Update board names for hwmv2 `2834883843` boards: riscv: rv32m1_vega: Convert to v2 `9c68231ba9` soc: openisa_rv32m1: Port to HWMv2 `986e9619fd` soc: starfive_jh71xx: Port to HWMv2 `e82932e787` boards: riscv: litex_vexriscv: Convert to v2 `cb9339f88f` soc: litex_vexriscv: Port to HWMv2 `1cd4c34654` boards: riscv: opentitan_earlgrey: Convert to v2 `92eadf06b8` soc: opentitan: Port to HWMv2 `a8659e170b` boards: riscv: titanium_ti60_f225: Convert to v2 `359133d725` soc: efinix_sapphire: Port to HWMv2 `6d466429ed` soc: soc_legacy: riscv: litex_vexriscv: Add updated paths `a1ff441eb3` boards: riscv: adp_xc7k_ae350: Convert to v2 `ef82a8255c` soc: ae350: Port to HWMv2 `282204758a` samples: boards: stm32: ccm: fix include path `8ca9341195` samples: basic: threads: fix broken reference `8a947f446d` boards: nrf52840dk: fix rst syntax `324cb41153` boards: nordic_nrf: fix broken references `963c74df1c` boards: intel_(ish\|adl\|ehl\|rpl), up_squared: fix include paths `8d518ce504` boards: legacy: drop empty folders `0fef0cef5b` boards: mps2: fix table formatting `e52ccc244f` boards: add HWMv2 board index `c7426eca5e` boards: arm: add legacy tag `1eba9d8a8f` boards: acrn: create vendor folder `8d92edc727` tests: kernel: Adjust qemu_x86_tiny_768 configuration HWMv2 `75117d1b2d` scripts: ensure posix path is used with --cmakeformat `0b0384b56a` maintainers: update paths after HWMv2 changes `c1b77b223d` boards: arm: pan1783: Convert to v2 `91a077b2ab` boards: posix: nrf_bsim: Update paths `413b6c2a40` cmake: modules: configuration_files: Add board identifier overlay file `4f572ba24f` treewide: Update board names for hwmv2 `cb348c7edf` boards: arm: nrf54l15pdk_nrf54l15: Convert to v2 `811ad90566` boards: arm: nrf54h20pdk_nrf54h20: Convert to v2 `d44ef90cf8` soc: nordic_nrf: Migrate nRF54H/nRF54L to v2 and fix nrf `c860f205de` boards: arm: nrf9151dk_nrf9151: Convert to v2 `fba98a1763` soc: nordic_nrf: Migrate nRF9151 to v2 `5c156a2d35` boards: arm: 96b_carbon_nrf51: Convert to v2 `cfc47a3a4b` boards: arm: nrf9161dk_nrf9161: Convert to v2 `37129b4e44` boards: arm: nrf9131ek_nrf9131: Convert to v2 `a923beba5d` boards: arm: bl5340_dvk: Convert to v2 `d242b2703b` boards: arm: raytac_mdbt53v_db_40_nrf5340: Convert to v2 `9c80d4e644` boards: arm: raytac_mdbt53_db_40: Convert to v2 `28268c4938` boards: arm: nrf5340_audio_dk_nrf5340: Convert to v2 `33ad2b5bc6` boards: arm: thingy53_nrf5340: Convert to v2 `40daa94f2d` boards: arm: nrf9160_innblue22: Convert to v2 `2b0dbb9d51` boards: arm: nrf9160_innblue21: Convert to v2 `ee6f7697ac` boards: arm: sparkfun_thing_plus_nrf9160: Convert to v2 `594e4bad6b` boards: arm: circuitdojo_feather_nrf9160: Convert to v2 `a5803ba099` boards: arm: actinius_icarus: Convert to v2 `db8c275456` boards: arm: actinius_icarus_bee: Convert to v2 `30177cf53d` boards: arm: actinius_icarus_som: Convert to v2 `486504cf24` boards: arm: actinius_icarus_som_dk: Convert to v2 `dd0672a64c` boards: arm: nrf9160dk_: Convert to v2 `c1565b3d14` boards: arm: xiao_ble: Convert to v2 `6dd2723314` boards: arm: qemu_cortex_m0: Convert to v2 `ee1ce24a42` boards: arm: bbc_microbit: Convert to v2 `1952d559f2` boards: arm: rm1xx_dvk: Convert to v2 `9e12c3d8bd` boards: arm: nrf51dongle_nrf51422: Convert to v2 `0ffbc1da33` boards: arm: nrf51_blenano: Convert to v2 `be52dfb7b6` boards: arm: nrf51_vbluno51: Convert to v2 `4c29d1827f` boards: arm: nrf51_ble400: Convert to v2 `5b4a9556fd` boards: arm: raytac_mdbt53_db_40_nrf5340: Fix typo `69e5d87a15` boards: arm: contextualelectronics_abc: Convert to v2 `5e4ace1bbe` boards: arm: degu_evk: Convert to v2 `2762460a64` boards: arm: pan1781_evb: Convert to v2 `fdc3913e76` boards: arm: ubx_evkninab1_nrf52832: Convert to v2 `9c9c3a09a1` boards: arm: holyiot_yj16019: Convert to v2 `109edc296f` boards: arm: blueclover_plt_demo_v2_nrf52832: Convert to v2 `7bfcdbbe8f` boards: arm: decawave_dwm1001_dev: Convert to v2 `0fbb543983` boards: arm: acn52832: Convert to v2 `073e0f8080` boards: arm: we_proteus2ev_nrf52832: Convert to v2 `197a19f396` boards: arm: ebyte_e73_tbb_nrf52832: Convert to v2 `1616fc8ae5` boards: arm: nrf52_vbluno52: Convert to v2 `5622077738` boards: arm: nrf52_sparkfun: Convert to v2 `a6289516e4` boards: arm: 96b_nitrogen: Convert to v2 `439d836883` boards: arm: nrf52_blenano2: Convert to v2 `16e65f09c4` boards: arm: arduino_nicla_sense_me: Convert to v2 `862efd5a21` boards: arm: thingy52_nrf52832: Convert to v2 `dede0f6cd3` boards: arm: nrf52_adafruit_feather: Convert to v2 `91e864ea29` boards: arm: nrf52832_mdk: Convert to v2 `47ec3e416b` boards: arm: ruuvi_ruuvitag: Convert to v2 `52f797a227` boards: arm: pinetime_devkit0: Convert to v2 `433db339f9` boards: arm: ubx_evkannab1_nrf52832: Convert to v2 `a646d3f2d5` boards: arm: ubx_bmd300eval_nrf52832: Convert to v2 `d0d434bf86` cmake: print identifier instead of variant `c3f5ed8157` boards: arm: we_proteus3ev_nrf52840: Convert to v2 `eecff8ee7a` boards: arm: nrf52840_mdk_usb_dongle: Convert to v2 `34507614f6` boards: arm: nrf52840_mdk: Convert to v2 `f02b56cb96` boards: arm: nrf52840_blip: Convert to v2 `600c55c92a` boards: arm: nrf52840_papyr: Convert to v2 `f294bfc5e4` boards: arm: reel_board: Convert to v2 `882524d2a0` boards: arm: nrf21540dk_nrf52840: Convert to v2 `4bce0e9b39` boards: arm: nrf52840dongle_nrf52840: Convert to v2 `d0229c771f` boards: arm: particle_argon: Convert to v2 `23a0570e64` boards: arm: particle_boron: Convert to v2 `b6d3e1764f` boards: arm: particle_xenon: Convert to v2 `499f3e7902` boards: arm: rak5010_nrf52840: Convert to v2 `9ae6b1804d` boards: arm: rak4631_nrf52840: Convert to v2 `fe2c90da5c` boards: arm: pinnacle_100_dvk: Convert to v2 `3d4d46698c` boards: arm: ubx_evkninab3_nrf52840: Convert to v2 `b1afbf0158` boards: arm: ubx_bmd380eval_nrf52840: Convert to v2 `9f9897c872` boards: arm: ubx_bmd345eval_nrf52840: Convert to v2 `f7fb2030c7` boards: arm: ubx_bmd340eval_nrf52840: Convert to v2 `7186432662` boards: arm: raytac_mdbt50q_db_40_nrf52840: Convert to v2 `32c4bdc0c4` boards: arm: pan1780_evb: Convert to v2 `7b64c638a8` boards: arm: pan1770_evb: Convert to v2 `156ee8ad8a` boards: arm: mg100: Convert to v2 `3d33dadeb0` boards: arm: arduino_nano_33_ble: Convert to v2 `4fee7371d2` boards: arm: adafruit_itsybitsy_nrf52840: Convert to v2 `ad37a0c222` boards: arm: adafruit_feather_nrf52840: Convert to v2 `cf85b7169f` boards: arm: bt510: Convert to v2 `44b67ac430` boards: arm: bt610: Convert to v2 `7dbb65d371` boards: arm: ubx_evkninab4_nrf52833: Convert to v2 `5e79cb957d` boards: arm: raytac_mdbt50q_db_33_nrf52833: Convert to v2 `12bd83a218` boards: arm: pan1782_evb: Convert to v2 `1a135ec352` boards: arm: bbc_microbit_v2: Convert to v2 `4dbe97e5ea` boards: arm: nrf52833dk: Convert to v2 `d632b90043` boards: arm: ubx_bmd360eval_nrf52811: Convert to v2 `cc1a30f24b` boards: arm: we_ophelia1ev_nrf52805: Convert to v2 `df0df9000b` boards: arm: ubx_bmd330eval_nrf52810: Convert to v2 `d2c7972a9a` boards: arm: nrf52dk: Convert to v2 `202c2bf447` boards: arm: bl654_sensor_board: Convert to v2 `c3e36f2042` boards: arm: bl654_usb: Convert to v2 `b9dd58aea1` boards: arm: bl654_dvk: Convert to v2 `0e1898b093` boards: arm: bl653_dvk: Convert to v2 `286f4a7524` boards: arm: bl652_dvk: Convert to v2 `d1709cdb37` boards: update nRF51dk board to board scheme v2. `8f040cff2c` boards: Update nrf5340dk_nrf5340 to HWMv2 scheme `8c90fae8e0` boards: update nRF52840dk_nrf52840/nrf52811 board to board scheme v2. `c828dcc60e` boards: common: openocd-nrf5: Add HWMv2 support `c79f1b0d94` kconfig: soc: adopt Nordic SoC series to support hw model v2 scheme `3584b30fc1` tests: Update board names for hwmv2 `94024d940e` boards: arm: arty_a7: Convert to v2 `8053c3a8df` boards: arm: scobc_module1: Convert to v2 `d5473b76fe` soc: designstart: Port to HWMv2 `f5792b05e7` boards: arm: fvp_baser_aemv8r_aarch32: Convert to v2 `ff202daa8e` soc: fvp_aemv8r_aarch32: Port to HWMv2 `e66cbc2945` boards: arm: v2m_musca_s1: Convert to v2 `33b47b2edb` boards: arm: v2m_musca_b1: Convert to v2 `baeebd31d2` soc: musca: Port to HWMv2 `73b257a3f9` boards: arm: v2m_beetle: Convert to v2 `85de0888ec` soc: beetle: Port to HWMv2 `867960a891` manifest: Update modules `6ca677ed3a` boards: arm: mps2: Convert to v2 `bcf4ad19d4` twister: build_dir: convert / to _ to support hwmv2 `0ac386683f` soc: Kconfig.v2: Add SOC_PART_NUMBER `9242c3c78f` soc: stm32: soc.yml: reorder series `248d17f160` boards: stm32: cleanup `0a67265e99` boards: stm32: fix for boards with revisions `f8d44317ee` soc: stm32l5: Rename overlays for nucleo_l552ze_q ns target. `400343d17e` soc: stm32: Set default on USE_DT_CODE_PARTITION `d783ef549a` soc: stm32l5: Update stm32l5 non secure targets in various places `643aeac552` boards: Convert stm32l562e_dk to HWM v2 `e601d64344` boards: Convert nucleo_l552ze_q to HWM v2 `2f7a387b32` soc: st: Migrate stm32l5 series to new hw model `519752efcd` boards: xenvm: doc: Remove reference to deleted file `06263dd717` boards: xenvm: Unset HEAP_MEM_POOL_SIZE in gicv3 variant `66b0df5526` boards: qemu_cortex_a53: Fix Kconfig warnings in SMP variant `fa07bd9419` boards: mps3: Fix non-secure variant `8f6f0726dd` boards: Move xenvm under xen `7b155a7031` boards: Raspberry Pi vendor fix `804697afa5` boards: Move 96b_aerocore to 96boards `d2f001e320` boards: x86: acrn: move and convert to HWMv2 `ec7f7b3c30` tests: kernel: qemu_x86: adjust to the HWMv2 `89dfcddc7e` boards: x86: qemu_x86_tiny@768: change to board variant `eb724eb6a7` boards: x86: qemu_x86: optimize default HWMv2 configurations `6f1043cde6` boards: x86: qemu_x86: move and convert to HWMv2 `cab924cbfb` soc: x86: ia32: move and convert to HWMv2 `237fdff918` soc: x86: lakemont: move and convert to HWMv2 `03042b7704` boards: move 96b_carbon to 96boards folder `767b94414e` boards: rename vendor seeed to seeed_studio `07fa3a3d79` boards: Convert olimex_lora_stm32wl_devkit to HWM v2 `ba01d3beca` boards: Convert nucleo_wl55jc to HWM v2 `7ce84f4041` boards: Convert lora_e5_mini to HWM v2 `b988bae576` boards: Convert lora_e5_dev_board to HWM v2 `6fbf39c726` soc: v2: stm32: Migrate STM32WL series `4a41878442` soc: st: stm32g4: add missing include `1e79ba15f6` boards: Convert weact_stm32g431_core to HWM v2 `ffdcb60185` boards: Convert nucleo_g474re to HWM v2 `d6acb08d3e` boards: Convert nucleo_g431rb to HWM v2 `90e592ffd1` boards: Convert b_g474e_dpow1 to HWM v2 `eb8a7e3441` soc: st: stm32: Migrate STM32G4 series `ada469f237` tests: Update board names for hwmv2 `0342433187` boards: arm: npcx9m6f_evb: Convert to v2 `c10248d964` boards: arm: npcx7m6fb_evb: Convert to v2 `21ddc5e6a6` boards: arm: npcx4m8f_evb: Convert to v2 `5500f3ef21` soc: npcx: Port to HWMv2 `e7baf09ede` soc: m48x: Port to HWMv2 `5bae4a6480` boards: arm: numaker_pfm_m467: Convert to v2 `3b0bd70c8c` soc: m46x: Port to HWMv2 `d52eab9e83` boards: Convert stm32g081b_eval to HWM v2 `6f2835cb11` boards: Convert stm32g071b_disco to HWM v2 `ca36d331d2` boards: Convert stm32g0316_disco to HWM v2 `662cc4e09b` boards: Convert nucleo_g0b1re to HWM v2 `dd9bc29769` boards: Convert nucleo_g071rb to HWM v2 `353da23ffb` boards: Convert nucleo_g070rb to HWM v2 `acc932b424` boards: Convert nucleo_g031k8 to HWM v2 `cea9b140fd` boards: Convert google_twinkie_v2 to HWM v2 `52e025943a` soc: st: stm32: Migrate STM32G0 series `1c7347686a` ci: update check_compliance to not create duplicate lines in Kconfig `9debd98799` hwmv2: boards: up_squared_pro_700: Add missed intel_adl changes `adab07c42f` boards: Convert msp_exp432p401r_launchxl to HWM v2 `642aacdcdf` soc: ti_simplelink: Add missing SoC `48637066d3` boards: Fix file paths in documentation `e983bc2a23` samples/tests: Fix mps3 board name `61e0f32716` boards: Convert stm32f3_seco_d23 to HWM v2 `a1688ff641` boards: Convert stm32f3_disco to HWM v2 `35fb228599` boards: Convert stm32373c_eval to HWM v2 `10e5d1122b` boards: Convert nucleo_f334r8 to HWM v2 `c319cb19f0` boards: Convert nucleo_f303re to HWM v2 `11725ccac1` boards: Convert nucleo_f303k8 to HWM v2 `400f7f6a4f` boards: Convert nucleo_f302r8 to HWM v2 `8d84861390` soc: v2: stm32: Migrate STM32F3 series `85b9eee7e8` boards: arm: kv260_r5: Convert to v2 `dafbd638e4` boards: arm: mercury_xu: Convert to v2 `3ecd12f415` boards: arm: qemu_cortex_r5: Convert to v2 `5db2390e9d` soc: xilinx_zyncmp: Port to HWMv2 `9ba8195cdc` boards: arm: qemu_cortex_a9: Convert to v2 `8e94b85361` boards: arm: zybo: Convert to v2 `c970127fc2` soc: xilinx_zynq7000: Port to HWMv2 `394c75373c` boards: arm: ast1030_evb: Convert to v2 `f2a1cc8714` soc: ast10x0: Port to HWMv2 `28f3f25945` boards: arm: cc3235sf_launchxl: Convert to v2 `c3e480f740` boards: arm: cc3220sf_launchxl: Convert to v2 `fd5847123f` boards: arm: beagleconnect_freedom: Convert to v2 `76ba9a0587` boards: arm: cc1352p1_launchxl: Convert to v2 `719baa8850` boards: arm: cc1352r1_launchxl: Convert to v2 `5060a61ae1` boards: arm: cc1352r_sensortag: Convert to v2 `99584be1c5` boards: arm: cc26x2r1_launchxl: Convert to v2 `2dc8933942` soc: ti_simplelink: Port to HWMv2 `a5b004663b` scripts/utils/board_v1_to_v2.py: couple of fixes `77c2c333e5` boards: move 96b_stm32_sensor_mez to 96boards `c14ff98650` boards: stm32f411e_disco: delete obsolete file `bcdc268ccf` boards: Convert stm32mp157c_dk2 to HWM v2 `0c8ba92e1f` boards: Convert 96b_avenger96 to HWM v2 `b54fe33077` soc: v2: stm32: Migrate STM32MP1 series `2ba3639b2a` boards: Convert nucleo_c031c6 to HWM v2 `dbc5ed79f5` soc: st: stm32: Migrate STM32C0 series `ce6d493aa3` boards: Convert stm32l1_disco to HWM v2 `a28086a9ca` boards: Convert nucleo_l152re to HWM v2 `1b2a511d06` boards: Convert 96b_wistrio to HWM v2 `ce281f09ab` soc: v2: stm32: Migrate STM32L1 series `cdb5364fd7` boards: Convert stm32f769i_disco to HWM v2 `768f173dcb` boards: Convert stm32f7508_dk to HWM v2 `21bbbbd9cb` boards: Convert stm32f746g_disco to HWM v2 `bab4265693` boards: Convert stm32f723e_disco to HWM v2 `58f8fe82ba` boards: Convert nucleo_f767zi to HWM v2 `37e9084070` boards: Convert nucleo_f756zg to HWM v2 `d467e7053a` boards: Convert nucleo_f746zg to HWM v2 `5f2808d7cc` boards: Convert nucleo_f722ze to HWM v2 `bbb73e7550` soc: st: Migrate stm32f7 series to new hw model `e9094afc4d` soc: st: stm32: stm32f4: change SOC_STM32F405XG to SOC_STM32F405XX `a1712cdd53` boards: Convert stm32f4_disco to HWM v2 `5be404b365` boards: Convert stm32f469i_disco to HWM v2 `baaa697ab2` boards: Convert stm32f429i_disc1 to HWM v2 `69ecab3c90` boards: Convert stm32f412g_disco to HWM v2 `2a572e3fb0` boards: Convert stm32f411e_disco to HWM v2 `ecfbf42757` boards: Convert stm32f401_mini to HWM v2 `e0191d03bb` boards: Convert steval_fcu001v1 to HWM v2 `4454648976` boards: Convert segger_trb_stm32f407 to HWM v2 `f0ad6ee6b8` boards: Convert olimex_stm32_p405 to HWM v2 `1f5e228ec8` boards: Convert olimex_stm32_h407 to HWM v2 `834bdb615e` boards: Convert olimex_stm32_h405 to HWM v2 `8f27fa8de2` boards: Convert olimex_stm32_e407 to HWM v2 `f8633a9038` boards: Convert nucleo_f446ze to HWM v2 `07e0bd2c07` boards: Convert nucleo_f446re to HWM v2 `24d7f625dc` boards: Convert nucleo_f429zi to HWM v2 `157a8cde53` boards: Convert nucleo_f413zh to HWM v2 `4ec99c31b0` boards: Convert nucleo_f412zg to HWM v2 `a21546140a` boards: Convert nucleo_f411re to HWM v2 `43f01ab6de` boards: Convert nucleo_f410rb to HWM v2 `60c16bcb8b` boards: Convert nucleo_f401re to HWM v2 `2db228d730` boards: Convert mikroe_mini_m4_for_stm32 to HWM v2 `73fc26225c` boards: Convert mikroe_clicker_2 to HWM v2 `6b62d90114` boards: Convert google_dragonclaw to HWM v2 `fa845af309` boards: Convert blackpill_f411ce to HWM v2 `5c8c3c3be0` boards: Convert blackpill_f401ce to HWM v2 `3c02db1290` boards: Convert blackpill_f401cc to HWM v2 `7eeb723cb7` boards: Convert black_f407zg_pro to HWM v2 `4f9461d068` boards: Convert black_f407ve to HWM v2 `a821de8532` boards: Convert az3166_iotdevkit to HWM v2 `ba580c7236` boards: Convert adi_sdp_k1 to HWM v2 `eb272ddf19` boards: Convert adafruit_feather_stm32f405 to HWM v2 `58ed121c3a` boards: Convert 96b_stm32_sensor_mez to HWM v2 `b0d70959d3` boards: Convert 96b_neonkey to HWM v2 `b1088baadc` boards: Convert 96b_carbon to HWM v2 `18d867b0a9` boards: Convert 96b_argonkey to HWM v2 `ee6ede7119` boards: Convert 96b_aerocore2 to HWM v2 `b48e70ead9` soc: v2: stm32: Migrate STM32F4 series `14d2b955da` cmake: convert path to CMake style before writing Kconfig files `9c4ac6a202` boards: posix: bsim: Update paths `14b57f56d7` tests: drivers: gpio: gpio_ite_it8xxx2_v2: Temp fix `f3b173be18` scripts: board_v1_to_v2: Update following move to boards_legacy `05b50f6691` cmake: CMake soc dir variable improvements for HWMv2 `a188e01a12` hwmv2: move all ported boards and socs to their final location `22c53e97b5` hwmv2: move all non-ported legacy boards and socs to legacy folders `53f3b181b0` soc: ti_k3: Port to HWMv2 `9f19a2075a` soc: rk3568: Port to HWMv2 `b8928b1628` soc: rk3399: Port to HWMv2 `cda3a74868` boards: arm64: qemu_kvm_arm64: Convert to v2 `70d704bd20` soc: x86: atom: move and convert to HWMv2 `4789e1068e` boards: x86: intel_rpl: move and convert raptor_lake boards to HWMv2 `384307e3dc` soc: x86: raptor_lake: move and convert to HWMv2 `ed025df674` boards: x86: intel_ehl: move and convert elkhart_lake boards to HWMv2 `994b6e1731` soc: x86: elkhart_lake: move and convert to HWMv2 `73b30a04cf` boards: x86: up_squared_pro_7000: move and convert to HWMv2 `83b133c207` boards: x86: intel_adl: move and convert alder_lake boards to HWMv2 `847a12f1e4` soc: alder_lake: move and convert to HWMv2 `67f4c8d2a1` samples: up_squared: adjust gpio_counter to HWMv2 `5326b5bfc0` boards: x86: up_squared: move and convert to HWMv2 `cfd5e691b4` soc: apollo_lake: move and convert to HWMv2 `ac9c235741` boards: xtensa: qemu_xtensa: Convert to v2 `f198c3a761` ci: update to osource for soc/Kconfig.defconfig files `e438e6cad4` ci: add SOC_SERIES_ as false positive in check_compliance.py `95e34da7c1` soc: v2: Convert st_stm32 to st/stm32 `313717df76` soc: mps3: Fix missing family `392c3969ed` boards: arm: am62x_m4: Convert to v2 `8f245d764d` tests: Update board names for hwmv2 `8f71bb7b4f` boards: arm64: khadas_edgev: Convert to v2 `e27d23aad0` soc: rk3399: Port to HWMv2 `80823b860e` boards: arm64: roc_rk3568_pc: Convert to v2 `72e4483dec` soc: rk3568: Port to HWMv2 `bed94669e3` boards: arm64: phycore_am62x_a53: Convert to v2 `c01af5a7b8` soc: ti_k3: Port to HWMv2 `1e563b4ca3` boards: arm64: xenvm: Convert to v2 `76e484adae` soc: xenvm: Port to HWMv2 `34412f7fe2` boards: arm64: rpi_4b: Convert to v2 `9be50e2ca9` soc: bcm2711: Port to HWMv2 `bbbed12c2f` boards: arm64: qemu_kvm_arm64: Convert to v2 `4f5ec7ff8f` soc: qemu_virt_arm64: Port to HWMv2 `d8d1b9f200` boards: arm64: qemu_cortex_a53: Convert to v2 `30bd34b31e` soc: qemu_cortex_a53: Port to HWMv2 `c20d0dcbb6` boards: arm64: fvp_baser_aemv8r: Convert to v2 `02ed6af463` boards: arm64: fvp_base_revc_2xaemv8a: Convert to v2 `1b175003a4` soc: fvp_aemv8*: Port to HWMv2 `de231b911d` boards: v2: Clean up obsolete comments `aa9597f6d9` boards: Convert waveshare_open103z to HWM v2 `9644828c81` boards: Convert stm32vl_disco to HWM v2 `86ab2bd430` boards: Convert stm32_min_dev to HWM v2 `d88d3ddcc4` boards: Convert stm32f103_mini to HWM v2 `0ccc0204e1` boards: Convert stm3210c_eval to HWM v2 `dd9972d782` boards: Convert olimex_stm32_h103 to HWM v2 `a2c2e1406d` boards: Convert olimexino_stm32 to HWM v2 `2d9c62e118` boards: Convert nucleo_f103rb to HWM v2 `e8ba99dc59` soc: v2: stm32: Migrate STM32F1 series `9a93916604` tests: Update board names for hwmv2 `9c4d94844d` boards: arm: bcm958401m2: Convert to v2 `feaf4ffba1` boards: arm: bcm958402m2: Convert to v2 `87f0827121` soc: bcm_vk: Port to HWMv2 `4526be24a5` boards: arm: quick_feather: Convert to v2 `cd921d2b97` boards: arm: qomu: Convert to v2 `b3c04051fc` soc: quicklogic_eos_s3: Port to HWMv2 `a73a9e7533` boards: v2: Clean up obsolete comments `8d87bcc167` boards: Convert stm32f0_disco to HWM v2 `1933585785` boards: Convert stm32f072_eval to HWM v2 `6f9fe5429d` boards: Convert stm32f072b_disco to HWM v2 `9dc78e4025` boards: Convert stm32f030_demo to HWM v2 `35113e8923` boards: Convert nucleo_f091rc to HWM v2 `b276aee9a4` boards: Convert nucleo_f070rb to HWM v2 `795f8d611b` boards: Convert nucleo_f042k6 to HWM v2 `2d82646443` boards: Convert nucleo_f031k6 to HWM v2 `959786f12d` boards: Convert nucleo_f030r8 to HWM v2 `81670db2e9` boards: Convert legend to HWM v2 `8980430aad` boards: Convert google_kukui to HWM v2 `ac020f66e0` dts: stm32f0: fix few warnings `5140e4551a` boards: v2: doc: Add vendors `77d640e0c9` soc: v2: stm32: Migrate STM32F0 series `0131e1c159` soc: v2: Add st_stm32 structure and common folder `36b63787a7` boards: v2: Add documentation index for converted boards `ae02fc5047` boards: sparc: qemu_leon3: Convert to v2 `f38f7bb223` boards: sparc: gr716a: Convert to v2 `d3cca3580e` soc: gr716a: Port to HWMv2 `6a8a0c1647` boards: sparc: generic_leon3: Convert to v2 `faf22185ce` soc: leon3: Port to HWMv2 `e94762ecdc` tests: Update board names for hwmv2 `9afcc27e05` boards: xtensa: qemu_xtensa: Convert to v2 `3e4a17018f` soc: dc233c: Port to HWMv2 `9188fdcd78` boards: xtensa: xt-sim: Convert to v2 `fcaa41cb5d` soc: xtensa_sample_controller: Port to HWMv2 `dbc413f7f7` scripts: board_v1_to_v2: Fix CONFIG_SOC_SERIES_ exclusion `6be3d4bc80` kconfig: remove Kconfig BOARD_RPI_PICO_W safe guard. `f4442fa698` boards: v2: Add documentation index for converted boards `ec5fbd67f7` boards: nios2: qemu_nios2: Convert to v2 `d3ef220460` soc: nios2-qemu: Port to HWMv2 `a223f284b5` boards: nios2: altera_max10: Convert to v2 `c381edcb73` soc: nios2f-zephyr: Port to HWMv2 `97401c7d2a` boards: mips: qemu_malta: Convert to v2 `e7a3243a24` soc: qemu_malta: Port to HWMv2 `bec82c690d` boards: v2: Add documentation index for converted boards `94f6f9b636` boards: arm: w5500_evb_pico: Convert to v2 `209235ab6e` boards: arm: sparkfun_pro_micro_rp2040: Convert to v2 `e5b1885907` boards: arm: adafruit_qt_py_rp2040: Convert to v2 `4c750818f9` boards: arm: adafruit_kb2040: Convert to v2 `8d3896caa4` boards: arm: rpi_pico: Convert to v2 `42cff42c42` soc: rpi_pico: Port to HWMv2 `c2df4ca9cb` scripts: improve yaml schema and board.yml validation for revisions `3970f90f71` cmake: clear BOARD_CACHE when invalid board identifier is given `3a70ee9ccd` cmake: improve board revision handling `3cda715fae` scripts: board_v1_to_v2: Don't add select CONFIG_SOC_SERIES_FOO `dc56a543f3` scripts: board_v1_to_v2: Add License + copyright `87147f88c4` cmake: prefer cache BOARD_IDENTIFIER over extracting from BOARD `65f5dc5b8c` cmake: fail when board identifier is applied in legacy hw model `7db2b6efd8` cmake: cache BOARD_IDENTIFIER to preserve it between CMake invocations `85dddac5a2` scripts: using extend in list_boards for variant list `6ae5c4e7fd` scripts: utils: add board v1->v2 conversion utility `ef834a12d0` maintainers: update Renesas RZT2M path `3ab7830625` boards: renesas: add documentation entry `a0c2ca0491` boards: arm: add documentation entry `27ff3654b7` boards: gigadevice: add documentation entry `6e02f43c0a` maintainers: update GD32 paths `1bfcf1d974` boards: gd32l233r_eval: convert to HWMv2 `6e621ee43f` boards: gd32f470i_eval: convert to HWMv2 `219b149768` boards: gd32f450z_eval: convert to HWMv2 `91c52b0d39` boards: gd32f450v_start: convert to HWMv2 `f0e0a973f6` boards: gd32f407v_start: convert to HWMv2 `6f592b64c9` boards: gd32f403z_eval: convert to HWMv2 `4bcb4b2ac8` boards: gd32f350r_eval: convert to HWMv2 `fdc7ed6eb0` boards: gd32e507z_eval: convert to HWMv2 `770376250d` boards: gd32e507v_start: convert to HWMv2 `a6d8b92e86` boards: gd32e103v_eval: convert to HWMv2 `a5f8e5daa1` boards: gd32a503v_eval: convert to HWMv2 `5ee799cc5f` boards: gd32f450i_eval: convert to HWMv2 `8aa8ce4ac8` soc: gigadevice: port to HWMv2 `4e203c14c7` cmake: enhanced board entry file handling `312265ee04` scripts: make SoC field mandatory in board.yml `c12ae3bcbc` boards: update Renesas rzt2m board.yml to contain SoC information `c5321c1dbe` cmake: make SoC optional for boards containing a single SoC `bcc06c60ae` scripts: support SoC list output for boards `db9e46010c` twister: update testcase.yaml and sample.yaml to mps3/an547 identifier `a988adee7d` boards: update arm mps3 an547 board to HWMv2 scheme `7dc2c9db0c` soc: use HWMv2 for arm mps3 SoC `c506675b7c` boards: update Renesas Starter Kit+ for RZ/T2M board to HWMv2 scheme `3abb792073` soc: use HWMv2 for renesas_rzt2m SoC `4f52bc646e` cmake: support hw model v2 in arch/Kconfig tree `a712b5005b` scripts: extend kconfig compliance to verify board / SoC scheme v2 `baa55141a1` twister: update twister testplan.py to handle HWMv2 boards `1f026f70eb` boards: extend list_boards.py and update boards CMake module `bd854a3af8` cmake: introduce arch and soc cmake modules for hw model v2 `c9edefa8fd` arch: add existing archs to archs.yml for HWMv2 support `61bbfb5ba2` scripts: introduce list_hardware.py for listing of architectures and SoCs `a4d1980c35` build: board/ soc: introduce hw model v2 scheme Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com> Signed-off-by: Declan Snyder <declan.snyder@nxp.com> Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com> Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com> Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no> Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com> Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com> Signed-off-by: David Leach <david.leach@nxp.com> Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com> Signed-off-by: Anas Nashif <anas.nashif@intel.com> Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com> Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com> Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no> Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com> Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com> Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com> Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com> Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no> Signed-off-by: Francois Ramu <francois.ramu@st.com> Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com> Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com> Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com> Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>	1 year ago
Sylvio Alves	b19c164e7b	soc: espressif: add common linker tls entry Adds common thread-local-storage.ld provided by Zephyr. This also fixes a wrong xtensa_core entry that should be riscv_core. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	2 years ago
Sylvio Alves	3f5ea785f2	linker: esp32: fix linker to enable proper MMU usage ESP32 flash_mmap() function requires `_rodata_reserved_start` address to be at the beginning of RODATA. This allows adding memory-mapped flash areas. Fixes #52764 Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	2 years ago
Sylvio Alves	4b5331ba45	linker: esp32: move snippets-section within rom boundary This will guarantee that application snippets will be placed into ROM section properly. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	2 years ago
Sylvio Alves	f5fa4b3bcd	soc: espressif: provide VMA to rodata and text by default Flash segments require VMA to proper work. Executing from LMA is not possible. Current implementation did not take into account runtime iterable rom sections that any application could implement. In the above cenario and as reported in the issue below, ESP32 won't run when those ROM sections are created in application level. This change make sure all flash segments are properly mapped accordingly. Fixes #61834 Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	2 years ago
Almir Okato	af3b04238e	soc: espressif: adjust memory organization on linker Adjust the memory organization to avoid overlapping critical regions from bootloaders (MCUboot and IDF) Signed-off-by: Almir Okato <almir.okato@espressif.com>	2 years ago
Marek Matej	6b57b3b786	soc: xtensa,riscv: esp32xx: refactor folder structure Refactor the ESP32 target SOCs together with all related boards. Most braking changes includes: - changing the CONFIG_SOC_ESP32* to refer to the actual soc line (esp32,esp32s2,esp32s3,esp32c3) - replacing CONFIG_SOC with the CONFIG_SOC_SERIES - creating CONFIG_SOC_FAMILY_ESP32 to embrace all the ESP32 across all used architectures - introducing CONFIG_SOC_PART_NUMBER_* to provide a SOC model config - introducing the 'common' folder to hide all commonly used configs and files. - updating west.yml to reflect previous changes in hal Signed-off-by: Marek Matej <marek.matej@espressif.com>	2 years ago
Marek Matej	4796746b5e	soc: esp32: MCUboot support This make MCUboot build as Zephyr application. Providing optinal 2nd stage bootloader to the IDF bootloader, which is used by default. This provides more flexibility when building and loading multiple images and aims to brings better DX to users by using the sysbuild. MCUboot and applications has now separate linker scripts. Signed-off-by: Marek Matej <marek.matej@espressif.com>	2 years ago
Anders Rillbert	2c162449eb	xtensa: linker: Fix #52539 by updating the linker scripts include all drom sections in the calculation of drom size. Signed-off-by: Anders Rillbert <anders.rillbert@kutso.se>	3 years ago
Glauber Maroto Ferreira	aba71499a9	soc: esp32c3: set RTC registers to known state Low-power management is part of the RTC peripherals' domain on ESP32C3. This dependency implies the need to bring some RTC registers to a known state, during system initialization, to achieve proper low-power handling. The RTC slow memory region is also delimited and used during power domain options selection. Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>	3 years ago
Sylvio Alves	8e04acab3b	linker: esp32: fix flash linking reference Referenced spi_flash_rom_patch.c object was wrongly linked, which can cause crash due to flash cache disabled operation. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	3 years ago
Carlo Caione	741b9dc65d	riscv: Rename __irq_wrapper to _isr_wrapper For some reasons RISCV is the only arch where the vector table entry is called __irq_wrapper instead of _isr_wrapper. This is not only a cosmetic change but Zephyr expects the common ISR handler to be called _isr_wrapper (for example when generating the IRQ vector table). Change it. find ./ -type f -exec sed -i 's/__irq_wrapper/_isr_wrapper/g' {} \; Signed-off-by: Carlo Caione <ccaione@baylibre.com>	3 years ago
Yuval Peress	86cadf9283	ztest: Fix userspace ztests in new API Update the new API to use K_USER as the flags for both CONFIG_USERSPACE and CONFIG_TEST_USERSPACE. Also, fix the linker script to properly include the suites, tests, and rules. Fixes #44108 Signed-off-by: Yuval Peress <peress@google.com>	3 years ago
Sylvio Alves	8148449db0	soc: esp32: move libc strings in dram area Move libc strings to RAM area so that ESP32 doesn't crash when flash cache is disabled Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	3 years ago
Sylvio Alves	bb077a3d82	soc: esp32c3: linker changes to enable newlibc and cpp Adds linker changes to enable cpp and newlibc code. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	3 years ago
Gerard Marull-Paretas	d342e4c4c1	linker: update files with <zephyr/...> include prefix Linker files were not migrated with the new <zephyr/...> prefix. Note that the conversion has been scripted, refer to #45388 for more details. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>	3 years ago
Sylvio Alves	6c6b688b91	driver: spi: esp32: update flash driver to use hal This modification is required to enable flash encryption. Using hal implementation of spi_flash calls maintains compability amongs different socs while offering latest esp-idf enhancements. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	3 years ago
Sylvio Alves	b9ba894584	soc: esp32c3: linker script clean up This PR removes common-rom.ld section so that logging sections can now be mapped into RAM area. Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>	3 years ago
Gerard Marull-Paretas	c925b5991a	include: remove unnecessary autoconf.h includes The autoconf.h header is not required because the definitions present in the file are exposed using the compiler `-imacros` flag. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>	3 years ago

25 Commits (1df34033934b4f899e9fce6c7913db13a5644915)