d0aced304b
drivers: spi: RPi Pico PIO SPI code size and byte order.
...
Use minimized PIO code for 3-wire operation.
Input and output buffers are conventionally stored in bus byte order.
For 16 and 32 bit transfers, this is effectively big-endian, so
txbuf and rxbuf need to be read as such. Those pointers also need
to be declared uint8_t * instead of void *.
In addition, tx_count and rx_count are based on dts, and refer to
whole transfers (8, 16, or 32 bits), not bytes.
Added rpi_pico.overlay to samples/sensor/magn_polling to demonstrate
32-bit word size, and updated the README.rst to make it independent
of the specific sensor.
Clean up compliance check failures.
Fix typos.
Synchronize 3-wire TX and RX cycles.
Simplify state machine synchronization
Minimize SPI bus delay time in 3-wire mode
Move clock delay to PIO code and remove k_sleep
Signed-off-by: Steve Boylan <stephen.boylan@beechwoods.com>
8 months ago
ee77704715
samples: sensor: use zephyr:code-sample directive
...
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
10 months ago
8dc3f85622
hwmv2: Introduce Hardware model version 2 and convert devices
...
This is a squash of the ``collab-hwm`` branch which converts all
in-tree boards to hardware model version 2 including build system
changes, board updates and soc conversions.
This squash is a combination of the following commits:
ca214745a1 soc: Remove soc_legacy folder and move ARM Kconfig
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
1 year ago
0b90fd5adf
samples, tests, boards: Switch main return type from void to int
...
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
2 years ago
79e6b0e0f6
includes: prefer <zephyr/kernel.h> over <zephyr/zephyr.h>
...
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
3 years ago
a202341958
devices: constify device pointers initialized at compile time
...
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
3 years ago
0e917af9e3
samples: sensor: Extend magn_polling to support additional drivers
...
Extends the magn_polling sample application to support additional
magnetometer drivers. This is a first step towards reducing the number
of driver-specific sensor sample applications.
Integration platforms were selected to exercise different magnetometer
drivers.
Tested on hardware with the following configurations:
- fxos8700 driver with the on-board sensor on the frdm_k64f board
- lis2mdl driver with a x_nucleo_iks01a3 shield attached to a frdm_k64f
board
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
3 years ago
e0208be634
samples: sensor: Remove GPIO references from magn_polling
...
The magn_polling sample application doesn't use GPIO.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
3 years ago
4ba3e136f1
samples: sensor: bmc150magn: Convert sample to use DEVICE_DT_GET_ONE
...
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
3 years ago
c7b5b3c419
samples: migrate includes to contain <zephyr/...> prefix
...
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
3 years ago
1cccc8a8fe
cmake: increase minimal required version to 3.20.0
...
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
4 years ago
56048bb500
samples: add FP formatting to all samples that require it
...
Samples that include floating-point format specifications may need
cbprintf FP support. Make sure it's available.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
5 years ago
e18fcbba5a
device: Const-ify all device driver instance pointers
...
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes #27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
5 years ago
2cd51a33ce
samples: make find_package(Zephyr...) REQUIRED
...
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
5 years ago
97326c0445
device: Fix structure attributes access
...
Since struct devconfig was merged earlier into struct device, let's fix
accessing config_info, name, ... attributes everywhere via:
grep -rlZ 'dev->config->' | xargs -0 sed -i 's/dev->config->/dev->/g'
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
5 years ago
407b49b35c
cmake: use find_package to locate Zephyr
...
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
5 years ago
36c94ddd36
sensor: bmc150_magn: Convert to DTS
...
Convert bmc150_magn sensor driver to utilize device tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
6 years ago
6e5db350b2
coccinelle: standardize k_sleep calls with integer timeouts
...
Re-run with updated script to convert integer literal delay arguments to
k_sleep to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
6 years ago
9ab2a56751
cleanup: include/: move misc/printk.h to sys/printk.h
...
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
6 years ago
8c1f89fa99
cleanup: include/: move sensor.h to drivers/sensor.h
...
move sensor.h to drivers/sensor.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
6 years ago
3ae52624ff
license: cleanup: add SPDX Apache-2.0 license identifier
...
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
6 years ago
da5f185e06
samples: add test identifier
...
Add unique identifier instead of just 'test' for samples.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
6 years ago
5060ca6a30
cmake: increase minimal required version to 3.13.1
...
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
7 years ago
7eabab2f5d
samples, tests: Use semi-accurate project names
...
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
7 years ago
deaab90641
tests/samples: cleanup tags
...
Remove redundant 'sample' tag and add something that matches the
functionality and features being tested, demonstrated.
Avoid short abbriviations and using full names for fs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
7 years ago
55ee53ce91
cmake: Prepend 'cmake_minimum_required()' into 'app' build scripts
...
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355 .
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
7 years ago
159e0a2167
samples: magn_polling: fix dependencies and test cleanup
...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
8 years ago
23f81eeb42
tests/samples: fixed yaml syntax
...
Use a map directory, avoid the list which makes parsing a bit
cumbersome.
Fixes #5109
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
8 years ago
0829ddfe9a
kbuild: Removed KBuild
...
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
8 years ago
12f8f76165
Introduce cmake-based rewrite of KBuild
...
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
8 years ago
0356590df5
tests: samples: fix yaml syntax
...
Fix indentation and syntax and make it pass yamllint tool.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
8 years ago
470c5f3189
tests: remove testcase.ini files
...
We now use yaml files.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
8 years ago
cc24f4b03c
tests: samples: convert testcase files to yaml
...
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
8 years ago
6a7527b5b4
doc: add labels to sensor sample docs for linking
...
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: I37c654fb0bb7ebdf288af01e41ce5497969f8968
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
8 years ago
2cb045420c
doc: fix .rst files canonical heading order
...
The headings on some .rst files were not following the expected
heading order of using # for h1, * for h2, = for h3, and - for h4
This patch fixes that, and the doc/templates/*.tmpl files created
for folks to use as templates for creating board and sample docs.
Change-Id: I0263b005648558d5ea41a681ceaa4798c9594dd9
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
9 years ago
ac74d8b652
license: Replace Apache boilerplate with SPDX tag
...
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
9 years ago
f0da59b062
sensor: Fix samples that assume incorrect sensor_value type.
...
Various sensor samples are hardwired to expect returned sensor values
are represented as doubles. In each case this assumption is incorrect.
Introduce a generic sensor_value to double helper function and adjust
the samples to use it.
Change-Id: I89c788686576562b84e07a36064640231340c33b
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
9 years ago
d622b09bc0
samples: tests: remove obsolete KERNEL_TYPE and kernel variables
...
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
9 years ago
1dc946bda1
sensors: magn_polling: convert to and build with unified kernel
...
Change-Id: Ib0c364c1e9faa95adf8e7a5dde8d6aa1214d9771
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
9 years ago
511339f54c
samples: cleanup sensor samples
...
- remove useless Kconfigs
- remove SPI DW kconfigs, we now use QMSI driver
- Cleanup readme and turn into ReST
Change-Id: Ie1f39e0afabf499fa81627ded59adf267e01993a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
9 years ago
f482200f9c
samples: remove useless filters in testcase.ini
...
Change-Id: Iaf7f77a738a48918752347c97019660355de370a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
9 years ago
e61041dade
samples: magn_polling: build for sanitycheck
...
Change-Id: I10ca471302050a107e720dfd4ca6c9961b588721
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
9 years ago
72786486c6
sensor: remove CONFIG_SENSOR_DEBUG
...
Remove the CONFIG_SENSOR_DEBUG as it is no longer needed since switching
to SYS_LOG_* in the sensor susbsystem.
Also, use __ASSERT where CONFIG_SENSOR_DEBUG was used to validate
function parameters.
Change-Id: I80ed7209abfb92220fa229d246c5b3a43b887e32
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
9 years ago
fe1fb2a9b9
samples: magn_polling: include stdio.h and remove redundant configs
...
Change-Id: I8b2c729761c36c777c675c2b26f9ec7d3a22567c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
9 years ago
fd094f8cfc
samples: revert to default CFLAGS
...
SDK version 0.7.5 has fixed ZEP-62. It is no longer necessary to use
-O0 in order to get correct readings from sensors.
Change-Id: Ia8ac2f55453b7dfdda71fe2f41863cbd0b366739
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
9 years ago
9d4c6507e4
sensor: add magnetometer generic polling sample
...
Add generic sample that continuosly read magnetometer data from
the first device that finds available within a predefined list.
Change-Id: Ia9b5fd434f462fb4704896852415f90eb633e1eb
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
9 years ago
Steve Boylan
Benjamin Cabé
Torsten Rasmussen
Keith Packard
Gerard Marull-Paretas
Maureen Helm
Benjamin Björnsson
Peter Bigot
Tomasz Bursztyka
Marc Herbert
Kumar Gala
Anas Nashif
Reto Schneider
Sebastian Bøe
David B. Kinder
Marcus Shawcroft
Andrew Boie
Bogdan Davidoaia
Vlad Dogaru
Murtaza Alexandru