zephyr

Commit Graph

Author	SHA1	Message	Date
Vinayak Kariappa Chettimada	d382fca6ff	Bluetooth: Controller: Fix HCI command buffer allocation failure Fix HCI command buffer allocation failure, that can cause loss of Host Number of Completed Packets command. Fail by rejecting the HCI Host Buffer Size command if the required number of HCI command buffers are not allocated in the Controller implementation. When Controller to Host data flow control is supported in the Controller only build, ensure that BT_BUF_CMD_TX_COUNT is greater than or equal to (BT_BUF_RX_COUNT + Ncmd), where Ncmd is supported maximum Num_HCI_Command_Packets in the Controller implementation. Relates to commit `81614307e9` ("Bluetooth: Add workaround for no command buffer available")'. Relates to commit `297f4f481f` ("Bluetooth: Split HCI command & event buffers to two pools"). Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>	5 months ago
Vinayak Kariappa Chettimada	8ebc4f3384	Bluetooth: Controller: Fix sync_delay and latency in LE BIG Complete Fix missing sync_delay and transport_latency information in HCI LE BIG Complete event. Relates to commit `1a640e4711` ("Bluetooth: controller: Included transport latency in LE_Big_Established"). Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>	5 months ago
Mariusz Skamra	6723625336	Bluetooth: Controller: Fix LE Create BIG Complete event parameter This fixes uninitialized iso_interval parameter in bt_hci_evt_le_big_complete. Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>	5 months ago
Johan Hedberg	09e86f3b69	Bluetooth: Host: Remove HCI ECC emulation Remove the HCI command & event emulation layer for ECDH commands and events. This means that we always do the necessary operations in the host. The existing BT_ECC Kconfig option stays, but now gets automatically enabled when necessary (e.g. based on the BT_SMP option), which is why this commit removes so many explicit assignments in prj.conf files. Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>	6 months ago
Aleksander Wasaznik	e8c5405609	Bluetooth: Controller: Fix headroom reservation for ISO Calling `net_buf_reserve` removed any previous reservation, which includes the reservation by hci_ipc to hold the H4 type byte. This resulted in a out-of-bounds net_buf_push in hci_ipc. This commit also enables asserts in hci_ipc in the audio bsim test, which reveal the out-of-bounds write. Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>	7 months ago
Pieter De Gendt	e9e64bab35	drivers: bluetooth: hci: Place API into iterable section Add wrapper DEVICE_API macro to all bt_hci_driver_api instances. Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>	7 months ago
Valerio Setti	f4592382bb	bt: use PSA for HCI ECC and rename BT_TINYCRYPT_ECC This commit sets PSA Crypto API as the default library to perform ECC-DH in HCI, replacing TinyCrypt (which is being deprecated). Therefore the symbol BT_TINYCRYPT_ECC is renamed as BT_SEND_ECC_EMULATION. References in samples/tests are also fixed. Signed-off-by: Valerio Setti <vsetti@baylibre.com>	7 months ago
Johan Hedberg	30d1d0e526	Bluetooth: Host: Remove deprecated HCI driver API Remove the deprecated HCI driver API which was provided by the hci_driver.h header file. The deprecation happened in Zephyr 3.7, so the API can now be removed for Zephyr 4.1. Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>	8 months ago
Lucas Mathias Balling	cb0e3a7646	Bluetooth: Controller: Implement PAST support in ULL Implement PAST support in ULL and fixed test after changed dependencies in ull_sync_internal.c Signed-off-by: Lucas Mathias Balling <lutb@demant.com>	9 months ago
Vinayak Kariappa Chettimada	409402f0cc	Bluetooth: Controller: Add ISR profiling using ticker ticks Add ISR profiling using ticker ticks, hence profile ISR CPU use outside radio events. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>	11 months ago
Morten Priess	0e6bb8aa96	Bluetooth: controller: Fix number of handles in le_big_sync_established Use lll->stream_count instead of lll->num_bis for returning the correct number of handles. Signed-off-by: Morten Priess <mtpr@oticon.com>	11 months ago
Rubin Gerritsen	3bcaa6f8d6	Bluetooth: Controller: Handle return value of ll_deinit() This call may fail. Handling the return value makes it easier to catch bugs. Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>	12 months ago
Pisit Sawangvonganan	9b305d5d72	bluetooth: controller: fix typo Utilize a code spell-checking tool to scan for and correct spelling errors in all files within the subsys/bluetooth/controller directory. Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>	1 year ago
Troels Nilsson	eea1573b2b	Bluetooth: Controller: Collection of small fixes for BIS Use PDU_BIS_LLID_FRAMED in empty PDUs for framed BIS Allocate room for header when calculating max_pdu for framed BIS Set group_sync_delay, stream_sync_delay and framed properly for BIS broadcaster Add missing call to isoal_tx_event_prepare() for BIS Signed-off-by: Troels Nilsson <trnn@demant.com> Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>	1 year ago
Nirosharn Amarasinghe	1a640e4711	Bluetooth: controller: Included transport latency in LE_Big_Established Included missing transport_latency_BIG information in HCI LE_Big_established message. Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>	1 year ago
Vinayak Kariappa Chettimada	fe89b0ddfb	Bluetooth: Controller: Fix BT_CTLR_ISOAL_PSN_IGNORE for event overlap Fix BT_CTLR_ISOAL_PSN_IGNORE implementation when adjusting Sequence Number during overlap with current CIG event. Reuse the implementation from non-PSN ignore implementation. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no> Signed-off-by: Troels Nilsson <trnn@demant.com>	1 year ago
Johan Hedberg	44e0f5fee3	Bluetooth: controller: Update to new HCI driver API Update the native controller to the new HCI driver API. The devicetree node is placed under existing `radio` nodes, which seemed like the most intuitive option. Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>	1 year ago
Vinayak Kariappa Chettimada	78466c8f52	Bluetooth: Controller: Use BT_HCI_ERR_UNSPECIFIED as needed A Host shall consider any error code that it does not explicitly understand equivalent to the error code Unspecified Error (0x1F). Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>	1 year ago
Vinayak Kariappa Chettimada	fe205a598e	Bluetooth: Controller: Refactor BT_CTLR_LE_ENC implementation Refactor reused function in BT_CTLR_LE_ENC feature. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>	1 year ago
Vinayak Kariappa Chettimada	a66baa1101	Bluetooth: Controller: Introduce BT_CTLR_CRYPTO_SUPPORT Introduce BT_CTLR_CRYPTO_SUPPORT so that preliminary port to support nRF54L15 SoC can be upstreamed without encryption support. ENTROPY_GENERATOR now selected when BT_CTLR_CRYPTO enabled. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>	1 year ago
Yong Cong Sin	e54b27b967	arch: define `struct arch_esf` and deprecate `z_arch_esf_t` Make `struct arch_esf` compulsory for all architectures by declaring it in the `arch_interface.h` header. After this commit, the named struct `z_arch_esf_t` is only used internally to generate offsets, and is slated to be removed from the `arch_interface.h` header in the future. Signed-off-by: Yong Cong Sin <ycsin@meta.com>	1 year ago
Yong Cong Sin	bbe5e1e6eb	build: namespace the generated headers with `zephyr/` Namespaced the generated headers with `zephyr` to prevent potential conflict with other headers. Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH` that is enabled by default. This allows the developers to continue the use of the old include paths for the time being until it is deprecated and eventually removed. The Kconfig will generate a build-time warning message, similar to the `CONFIG_TIMER_RANDOM_GENERATOR`. Updated the includes path of in-tree sources accordingly. Most of the changes here are scripted, check the PR for more info. Signed-off-by: Yong Cong Sin <ycsin@meta.com>	1 year ago
Troels Nilsson	769409d41c	Bluetooth: Controller: Add parameter to ISOALs sdu_write For vendor datapaths that do not use a netbuffer to write SDUs into, the callee of sdu_write currently has to keep track itself of how much data has been written to the current SDU; This is wasteful since ISOAL already keeps track of that. Add an sdu_written parameter to the callback to inform the callee how much has been written to the current SDU already so the callee can write using the correct offset Signed-off-by: Troels Nilsson <trnn@demant.com>	1 year ago
Johan Hedberg	484fe3f06c	Bluetooth: Remove bt_read_static_addr() "hack" This function was used to shortcut HCI for combined host + controller builds. It doesn't provide much value and adds complexity to the HCI driver interface, so just remove it. This means vendor-specific HCI commands is now the only way for the host to access the same information. Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>	1 year ago
Johan Hedberg	35897ee66c	Bluetooth: Kconfig: Get rid of BT_HCI_VS_EVT Enabling vendor-specific extensions also implies support for vendor events, so a separate Kconfig option for that is unnecessary. One small additional thing this requires is the use of the __maybe_unused annotation, since there's no-longer a single Kconfig option that the controller hci.c can use to know that the vendor event helper symbols are needed. Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>	1 year ago
Johan Hedberg	18c23daee3	Bluetooth: Kconfig: Merge BT_HCI_VS_EXT into BT_HCI_VS The naming of these two options was problematic, since it's both of them are about vendor extensions, even though one has _EXT in the name and the other doesn't. Just merge one option into the other. This has a slight overhead on the controller side of enabling some more vendor features if BT_HCI_VS is enabled, but that should hopefully be acceptable. Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>	1 year ago
Vinayak Kariappa Chettimada	2c6306d099	Bluetooth: Controller: BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU Derive BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU to have optimal Controller memory allocations. BT_CTLR_ISO_TX_BUFFER_SIZE can be set lower than BT_ISO_TX_MTU in which case upper layer can send fragmented SDU to the Controller. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>	1 year ago
Vinayak Kariappa Chettimada	3997479b49	Bluetooth: HCI: Rename to bt_hci_iso_sdu_hdr and bt_hci_iso_sdu_ts_hdr Rename struct bt_hci_iso_data_hdr to bt_hci_iso_sdu_hdr, and struct bt_hci_iso_ts_data_hdr to bt_hci_iso_sdu_ts_hdr. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>	1 year ago
Troels Nilsson	5d44e36779	Bluetooth: Controller: Fix BIS target_event truncated to 8 bits The target_event value is up to 39-bits but was put into a uint8_t Signed-off-by: Troels Nilsson <trnn@demant.com>	1 year ago
Vinayak Kariappa Chettimada	a725931c11	Bluetooth: Controller: Add missing check for Coded PHY support Add missing check for Coded PHY support when creating extended advertising set. Added a fallback in Controller for upper layers requesting Coded PHY while Controller is implemented without Coded PHY. In this case, 1M PHY will be used in extended advertising for testing purposes. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>	1 year ago
Vinayak Kariappa Chettimada	9bcf275d8b	Bluetooth: Controller: Ignore bit 1 set in Initiating_PHYs Ignore LE 2M PHY being set in Initiating_PHYs of the LE Extended Create Connection command. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>	1 year ago
Vinayak Kariappa Chettimada	7ece6aed16	Bluetooth: Controller: Fix regression in BT_RX_STACK_SIZE use Fix regression in BT_RX_STACK_SIZE use due to commit `b91728619c` ("Bluetooth: host: remove `CONFIG_BT_RECV_BLOCKING`"). Profiling of Controller Rx thread has been mentioned in commit `586ba9fd13` ("Bluetooth: Controller: Increase BT_RX_STACK_SIZE for BT_HCI_RAW enabled"). Also, move the TX_STACK_SIZE value as default in Kconfig from the explicit value being set in hci_ipc sample. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>	1 year ago
Erik Brockhoff	dca085e155	bluetooth: controller: refactor node_rx_pdu for memory optimization Generic node_rx_hdr struct contains data not used for done event, so this pdu specific data is moved to node_rx_pdu to minimize memory usage for MFIFO_done alloc. This however calls for a considerable write-through replacing the generic node_rx_hdr with node_rx_pdu when relevant and needed. Signed-off-by: Erik Brockhoff <erbr@oticon.com>	1 year ago
Aleksander Wasaznik	171363501a	Bluetooth: Move `bt_hci_evt_get_flags` out of `hci_driver.h` This commit removes `bt_hci_evt_get_flags`, and the associated flag symbols. These symbols no longer serve a purpose in the driver interface after the removal of `bt_recv_prio` from the interface. The implementation of `bt_hci_evt_get_flags` is distributed to its still-existing use sites, `hci_core` and the `hci_driver` in the controller. The duplication of code is intentional. This is no longer part of any interface, and the host-developers expect the host copy of the function to change or dissapear entierly. This will allow the host implementation to progress without fear of breaking the controller implementation. Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>	1 year ago
Aleksander Wasaznik	b91728619c	Bluetooth: host: remove `CONFIG_BT_RECV_BLOCKING` This config selects a variant of the HCI driver interface that spills out host internals unto the drivers and even the Zephyr controller. It will now be removed in favor of driver interfaces that hide the internals of the host. The new default is `CONFIG_BT_RECV_WORKQ_BT`. Any references to the removed kconfig are refactored out. Any out-of-tree driver using the removed interface can be easily adapted by copying the following implementations into the driver as private functions: - `hci_driver.h:BT_HCI_EVT_FLAG_RECV_PRIO` - `hci_driver.h:BT_HCI_EVT_FLAG_RECV` - `hci_driver.h:bt_hci_evt_get_flags` - `hci_raw.c:bt_recv_prio` In combination these symbols function as a interface adapter. These symbols will be removed in this PR in subsequent commits. Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>	1 year ago
Morten Priess	6f374d850a	Bluetooth: controller: Parameter check for ISO sync recv qualification Add HCI input parameter validation according to spec for passing qualification tests. - Conditional compile of LE Set PA Receive Enable feature - Store BIGinfo encryption state and number of streams - Do not report BIGinfo if phy is invalid or unsupported - Return disallowed ll_read_iso_tx_sync uses sync recever handle - Validate BIS indices in ll_big_sync_create Signed-off-by: Morten Priess <mtpr@oticon.com>	1 year ago
Morten Priess	85b503e23b	Bluetooth: controller: ISO Sync Receiver vendor data path fixes Add checks for vendor specific data path in ULL and HCI driver, to enable use of vendor data path for BIS reception. Signed-off-by: Morten Priess <mtpr@oticon.com>	1 year ago
Vinayak Kariappa Chettimada	92ad509902	Bluetooth: Controller: Fix ext adv param checking intervals Fix Extended Advertising Parameter check to exclude legacy high duty cycle directed advertising from validating the intervals as advertising interval parameter values are not applicable for high duty cycle directed advertising. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>	1 year ago
Morten Priess	a30795e1f6	Bluetooth: controller: Fixes for BIGinfo endianness issues The BIGinfo PDU bitsets were not accessed in a portable maner for endianness independence, and need to be handled as bit-manipulations. Add utility functions to access PDU bitset variables independent of endianness. Use macros to abstract the offsets and widths. Conversion of BIG_Handle to LE in HCI layer incorrectly use sys_cpu_to_le16, which fail because target type is 8-bit. Signed-off-by: Morten Priess <mtpr@oticon.com>	1 year ago
Troels Nilsson	9ce9d57732	Bluetooth: Controller: Fix per adv interval value check Invalid values should result in BT_HCI_ERR_INVALID_PARAM The interval check should only fail with BT_HCI_ERR_UNSUPP_FEATURE_PARAM_VAL if the requested range cannot be fulfilled by the controller (ie. there is no overlap with the supported range) Fixes EBQ tests HCI/DDI/BI-53-C through HCI/DDI/BI-61-C and HCI/CCO/BI-64-C Signed-off-by: Troels Nilsson <trnn@demant.com>	1 year ago
Giancarlo Stasi	95851583b8	Bluetooth: Controller: Vendor Specific: support for Scan Request Reports Add support for vendor specific Set Scan Request Reports command and Scan Request Received Event, available for legacy advertising. Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>	1 year ago
Fabio Baltieri	12d89c65be	Bluetooth: Controller: re-add missing hci_vendor.c reference Move the nordic and openisa vendor file under ll_sw and add them back to the list when building for nRF platforms, this was inadvertently removed in `7bd2804c24` Bluetooth: Controller: Build vendor LLL as library and is currently causing a: <wrn> bt_id: No static addresses stored in controller and random address on nRF devices. Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com> Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>	1 year ago
Torsten Rasmussen	8dc3f85622	hwmv2: Introduce Hardware model version 2 and convert devices This is a squash of the ``collab-hwm`` branch which converts all in-tree boards to hardware model version 2 including build system changes, board updates and soc conversions. This squash is a combination of the following commits: ca214745a1 soc: Remove soc_legacy folder and move ARM Kconfig `f12cb0979f` scripts: ci: check_compliance: remove HWMv1 checks `1807bcf4d4` boards: mimx8mq_evk: port to HWMv2 `3ec2299c62` soc: nxp: port imx8mq SOC to HWMv2 `8ea02f4e63` boards: verdin_imx8mp: convert to HVMv2 `f2eb7652ce` boards: phyboard_pollux: move to HVMv2 `ab509a5ee0` boards: nxp: mimx8mp_evk: port M7 core to HWMv2 `06ad037f99` soc: nxp: imx8mp: port M7 core to HWMv2 `3f9e706859` boards: mimx8mm_phyboard: convert to HVMv2 `204372d264` boards: imx8mm_evk: port CM4 core to HWMv2 `f82c961a46` soc: nxp: imx8mm: port iMX8MM M4 core to HVMv2 `6987b2e305` boards: pico_pi: convert to HVMv2 `84484e6707` boards: warp7: convert to HWMv2 `ae443d1e3c` boards: meerkat96: port to HWMv2 `e3629c64e6` boards: colibri_imx7d: port to HWMv2 `fc835d893d` soc: nxp: convert iMX7 Dual core to HWMv2 `29ef2f23eb` boards: udoo_neo_full: convert to HWMv2 `fd49b1749e` soc: nxp: convert iMX6 SoloX core to HWMv2 `1e59b7a3fd` soc: nxp: imxrt11xx: only set CONFIG_CPU_HAS_FPU_DOUBLE_PRECISION for M7 `69bb0eb258` hwmv2: MAINTAINERS: Fix NXP maintainer yaml `1c4458890f` boards: firefly: roc_rk3568_pc: Fix SMP configuration `651a4370ad` boards: Fix variants and revisions `196cfda66d` tests/samples: Drop default revision identifiers `6ec6b1d75a` boards: Drop revision from twister identifiers for default revisions `b774cdd59f` scripts: utils: board_v1_to_v2: drop board_legacy prefix `7aa36e6640` boards: riscv: esp32c3_luatos_core: make usb variant `fe25709a9c` twister: add unit_testing soc and board `f88f211b4e` scripts: ci: check_compliance: improve the "not sorted" command `b21a455dfb` bluetooth: controller: Fix openisa checks `fdc76c48a7` workflow: compliance: Add rename limit `14ecafc67d` dts: bindings: vendor-prefixes: Sort entries `dbc366c3c7` soc: nxp: lpc: Move wrong configurations `8e02c08f96` maintainers: Fix invalid paths `b1b85e2495` boards: up: Fix spaces `58cc4013b3` maintainers: Fix xen path `66ce5c0b09` boards/soc: Add missing copyright headers `bb47243254` boards: qemu: x86: Remove pointless file `2e816a8a3a` samples: tests: update esp32-based board naming `9aeab17139` samples: tests: remove platform_exclude of esp32 boards `a4fe97b9de` boards: shields: m5stack_core2_ext: update board name `615fcab94a` samples: ipm_esp32: fix board labels and skip testing `7752f69b7f` boards: legacy: remove index entry for xtensa/riscv boards. `3eba827956` MAINTAINERS: update Espressif entries `914362bbd5` boards: xtensa: yd_esp32: Convert to v2 `a62278fd23` boards: xtensa: xiao_esp32s3: Convert to v2 `b6a11ccec4` boards: xtensa: olimex_esp32_evb: Convert to v2 `c1067c16d2` boards: xtensa: odroid_go: Convert to v2 `b8340b0109` boards: xtensa: m5stickc_plus: Convert to v2 `9d81e417be` boards: xtensa: m5stack_stamps3: Convert to v2 `c296672720` boards: xtensa: m5stack_core2: Convert to v2 `fada12aa9d` boards: xtensa: m5stack_atoms3_lite: Convert to v2 `fe37ebac1e` boards: xtensa: m5stack_atoms3: Convert to v2 `d32828fe6a` boards: xtensa: kincony_kc868_a32: Convert to v2 `5afba7855b` boards: xtensa: heltec_wireless_stick_lite_v3: Convert to v2 `ca48c17723` boards: xtensa: heltec_wifi_lora32_v2: Convert to v2 `db1fd4d229` boards: xtensa: esp32s3_luatos_core: Convert to v2 `a78b2552eb` boards: xtensa: esp32s3_devkitm: Convert to v2 `cc96061d96` boards: xtensa: esp32s2_saola: Convert to v2 `ed854e05d1` boards: xtensa: esp32s2_lolin_mini: Convert to v2 `4fa1ae8110` boards: xtensa: esp32s2_franzininho: Convert to v2 `5543040a18` boards: xtensa: esp_wrover_kit: Convert to v2 `2335ae79b3` boards: xtensa: esp32_ethernet_kit: Convert to v2 `f910b7ad4f` boards: xtensa: esp32_devkitc_wrover: Convert to v2 `32104db555` boards: xtensa: esp32_devkitc_wroom: Convert to v2 `e23a41200d` boards: riscv: icev_wireless: Convert to v2 `3c670e4e53` boards: riscv: xiao_esp32c3: Convert to v2 `fc7c6a060b` boards: riscv: stamp_c3: Convert to v2 `22c2edb89c` boards: riscv: esp32c3_luatos_core: Convert to v2 `0a96dcb778` boards: riscv: esp32c3_devkitm: Convert to v2 `be1ee1c446` vendors: update vendors lists `5e6c62137f` soc: espressif_esp32: Port to HWMv2 `037a3b52a4` boards: Raspberry Pi pico pwm led adjustment `7277cae6fa` samples: blinky_pwm: enable pwm_leds in rpi_pico overlay `da3e49d34e` boards: nxp: update selection of FLASH_MCUX_FLEXSPI_XIP_MEM_TARGET `bc8424dd3b` soc: nxp: imxrt: move FLASH_MCUX_FLEXSPI_XIP_MEM_TARGET to SOC level `041cb52939` soc: brcm: bcm_vk: Rename to bcnvk `576b43a95c` soc: Fix SOC_FAMILY name mismatches `e8f3e6494d` hwmv2: boards: intel: adsp: Fix runner after paths renamed `550399e927` boards: weact: stm32g431_core: Add wrongly deleted file back `08708c909e` tests: drivers: flash: Renamed missed board rename `06dac41e68` hwmv2: Convert Seagate Faze board to hwmv2 `dd8f842b40` hwmv2: nxp: update MAINTAINER paths for hwmv2 `b4d1c04978` hwmv2: lpc: updated overlay and conf files in samples and tests `067c69089e` boards: nxp: convert lpcxpresso55s69 to hwmv2 `097205b40a` hwmv2: Global fix of lpc54114_m4 overlay and conf files `d8cfa6fb29` boards: nxp: convert lpcxpresso54114 to hwmv2 `c29ed228c6` boards: nxp: convert lpcxpresso55s36 to hwmv2 `88cfd3d6ac` boards: nxp: convert lpcxpresso55s28 to hwmv2 `ad30c940ee` boards: nxp: convert lpcxpresso55s16 to hwmv2 `9e5a10ec80` boards: nxp: convert lpcxpresso55s06 to hwmv2 `5650c83268` boards: nxp: convert lpcxpresso51u68 to hwmv2 `82cf44be45` boards: nxp: convert lpcxpresso11u68 to hwmv2 `1a9c405a6f` soc: nxp: convert LPC SOC family to hardware model V2 `f2b536d253` boards: intel: doc: hwmv2: Fix some renamed paths `5ee6058710` samples/tests: Use board revisions `b76687602f` boards: Add yaml files for boards missing revisions `32ae4918d0` boards: nordic: Fix board names `cc1dabca65` MAINTAINERS: Update for renamed folders `a37ddce659` soc: xilinx: Rename to xlnx `a1393a07f6` soc: xenvm: Rename to xen `813ed00f67` soc: raspberry_pi: Rename to raspberrypi `71317d6798` soc: cadence: Rename to cdns `8cb0c51ec6` soc: broadcom: Rename to brcm `2b9db15c69` soc: andes: Rename to andestech `0101216ce1` soc: altera: Rename to altr `4b4c3ca65d` boards: wurth_elektronik: Rename to we `cdc3ef499f` boards: ublox: Rename to u-blox `cabdd4ad05` boards: space_cubics: Rename to sc `4b5bd7ae8a` boards: seeed_studio: Rename to seeed `a992785ceb` boards: raspberry_pi: Rename to raspberrypi `3c1cdc20fe` boards: laird_connect: Rename to lairdconnect `291c7cde2b` boards: cadence: Rename to cdns `95db897526` boards: broadcom: Rename to brcm `0a47b94879` boards: beagleboard: Change to beagle `9f9f221c24` boards: andes: Rename to andestech `e7869ca38a` boards: altera: Rename to altr `bf2fb5eca3` various: Change SOC_FAMILY_NRF to SOC_FAMILY_NORDIC_NRF `e25730ba56` modules: tf-m: Rename from nordic_nrf to nordic `9e3466606a` boards: nordic_nrf: Rename to nordic `09a398dcc8` soc: nordic_nrf: Rename to nordic `cb8ffc74f8` boards: renode: Add documentation index `2291ff4b55` boards: arm: riscv32_virtual: Convert to v2 `484b7f1996` soc: riscv_renode_virtual: Port to HWMv2 `cc5c2fb0c7` soc: raspberry_pi: Fix SOC_SERIES and SOC mismatch `59cb580513` soc: arm: designstart: Fix SOC_SERIES and SOC mismatch `aa9e0de7af` samples: Fix invalid links `a1480cf1cf` maintainers: Fix paths `0d719e004b` boards: Update documentation links `eb5c3e6f79` boards: wurth_elektronik: Drop duplicate prefix `a34a3640b7` boards: waveshare: Drop duplicate prefix `cf50e950e7` boards: weact: Drop duplicate prefix `737cfb548f` boards: sparkfun: Drop duplicate prefix `505494c97a` boards: segger: Drop duplicate prefix `4eaf69f37a` boards: ruuvi: Drop duplicate prefix `a1335caeae` boards: ronoth: Drop duplicate prefix `a9f7f30bf6` boards: raytac: Drop duplicate prefix `80db4c81b3` boards: qemu: Drop duplicate prefix `433d7e9976` boards: particle: Drop duplicate prefix `4ea79d19e7` boards: olimex: Drop duplicate prefix `fd4ae6f6a8` boards: mikroe: Drop duplicate prefix `36080549bd` boards: khados: Drop duplicate prefix `169bf8ae1d` boards: intel: Drop duplicate prefix `25f04d5222` boards: holyiot: Drop duplicate prefix `11c2af0de8` boards: google: Drop duplicate prefix `d5128f4016` boards: ebyte: Drop duplicate prefix `44fbc68cad` boards: dragino: Drop duplicate prefix `f7fe431b44` boards: contextual_electronics: Drop duplicate prefix `9094fea63b` boards: circuit_dojo: Drop duplicate prefix `b632acc1fc` boards: blue_clover: Drop duplicate prefix `1a3316ebdc` boards: bbc: Drop duplicate prefix `71c0344f8c` boards: arduino: Drop duplicate prefix `f0176fc25f` boards: altera: Drop duplicate prefix `36b920ed0f` boards: adi: Drop duplicate prefix `22520368d9` boards: adafruit: Drop duplicate prefix `296acfb2bc` boards: actinius: Drop duplicate prefix `55063380b7` boards: 96boards: Drop duplicate prefix `1f93394b55` boards: nxp: convert mimxrt595_evk to hardware model v2 `e7a4fd2ec1` soc: nxp: rt5xx: convert RT5xx SOC to HWMv2 `01942f1d11` twister: normalize platform name when storing files/data `477c8b84dd` twister: tests: test with slashes in platform names `64e3e816c4` soc: Add include guards `3a7aa2fa49` gitignore: update the compliance file list `84e1c17ad9` scripts: ci: check_compliance: add a check for board yml file `a90f53ad57` boards: sync up the vendor tags and vendor-list `af9aa65299` dts: vendor-prefixes: add keep-sorted markers `50f0bf05a3` dts: vendor-prefixes: sort the vendor list `a10b614aa4` dts: vendor-prefixes: ensure all prefixes are lowercase `5abe735e93` manifest: update SOF sha for NXP HWMv2 `9ab8f64ca9` modules: rename SOC_FAMILY_IMX `483ff8dd4d` modules: mcux: remove SOC_FAMILY_NXP_ADSP `f113dd5342` samples: update board name `39b31287d9` boards: nxp: Convert i.MX ADSP boards to hardware model v2 `1511e356a2` soc: nxp: Port i.MX ADSP family to hardware model v2 `c91e25ab47` soc: mec: rename all mec1501x reference to mec15xx `1c231fd939` hwmv2: boards: Convert IMXRT boards `417cff1e60` hwmv2: soc: Port IMXRT family to HWMV2 `28d4e41b1b` hwmv2: clean up arm64 soc and board empty directory `2b520f83cb` hwmv2: port NXP SoC LS1046A to V2 `bf7899c645` hwmv2: port nxp_ls1046ardb board to V2 `33f7b61866` samples/tests: Rename numaker boards `8f20ea6e93` boards: nuvoton: numaker_pfm: Split into 2 boards `7cf4ff43a1` drivers: pinctrl: imx: align with hwm v2 `c68e1fea4e` drivers: clock_control: ccm_rev2: align with hwm v2 update `3b49014a0f` hwmv2: move imx8mn EVK board to V2 `14f344eeab` hwmv2: move imx8mp EVK board to V2 `40f3f8f22d` hwmv2: move imx8mm EVK board to V2 `10bf79ea51` hwmv2: move imx8m soc for a-core to V2 `8727d5ca80` hwmv2: move imx93 EVK board to V2 `c81ef01563` hwmv2: move imx93 soc to V2 `5836c1b699` modules: mcux: introduce CONFIG_MCUX_CORE_SUFFIX `338f6f2bf1` doc: update board porting guide to match new hardware model `9639a1b5dc` soc: silabs: drop useless defconfigs `981807444e` soc: silabs: introduce SOC_GECKO_SDID `5d07e82485` soc: silabs: SOC_FAMILY_* replace SOC_GECKO_SERIES* `2fd081ac86` soc: silabs: align comments with soc tree `66d425f571` soc: silabs: split in families `5bd38f47a9` arch: arch: kconfig: Fix wrong placement of endmenu `00c6ef25be` tests/samples: Rename overlay files for renamed boards `0c639b8378` boards: Fix bools and selections `c2ef907d1d` drivers: flash: it8xxx2: Add missing Kconfigs `553de2ebc9` soc: ite: ec: it8xxx2: Fix SOC_SERIES being in wrong file `b8ec0080c2` boards: Documentation link fixes `eb7025e50f` tests: Update board names for hwmv2 `10ef3d4bd2` boards: silab: Add documentation index file `ba9fdaa1d6` boards: arm: efr32_radio: Convert to v2 `86c8d4a0ca` boards: arm: efm32pg_stk3402a: Convert to v2 `575ac5cafb` manifest: Update hal_silabs `87b2907304` boards: arm: efr32_thunderboard: Convert to v2 `14b30055ab` boards: arm: efr32mg_sltb004a: Convert to v2 `0012bfc15d` boards: arm: efr32xg24_dk2601b: Convert to v2 `f526225ead` boards: arm: efm32wg_stk3800: Convert to v2 `19e7df29df` boards: arm: efm32pg_stk3401a: Convert to v2 `0bd7d963d6` boards: arm: efm32hg_slstk3400a: Convert to v2 `795a90f9bf` boards: arm: efm32gg_stk3701a: Convert to v2 `43d5540be7` boards: arm: efm32gg_slwstk6121a: Convert to v2 `065148d856` boards: arm: efm32gg_sltb009a: Convert to v2 `1dc9a8aa17` soc: silabs_exx32: Port to HWMv2 `763571e878` tests: Expand names `dae301b8a3` boards: xen: xenvm: Expand name `19e60eef36` boards: qemu: qemu_cortex_a53: Expand names `a0a7c30f28` soc: intel: intel_adsp: Fix issues `df9a4223fe` scripts: ci: introduce soc name check in check_compliance `ed401abaff` soc: emsdsp: align SoC name defined in soc.yml to Kconfig SOC setting `fc78e5eaa4` MAINTAINERS: update RISC-V arch area paths `4e586958ff` boards: convert QEMU RISC-V 64 bit board to Zephyr HWMv2 `f4c31a2b86` boards: convert QEMU RV32E board to Zephyr HWMv2 `5b2ffc652b` boards: convert QEMU RISC-V 32 bit board to Zephyr HWMv2 `5db061a4c6` soc/riscv: convert the QEMU virt RISCV-32 SoC to HWMv2 `6547845e9d` boards: convert SparkFun RED-V Things Plus to Zephyr HWMv2 `95a1f96399` boards: convert SiFive HiFive Unmatched to Zephyr HWMv2 `e563eb0a62` soc/sifive/sifive_freedom: add SiFive Freedom FU740 SoC `8914bc58b6` boards: convert SiFive HiFive Unleashed to Zephyr HWMv2 `7e8de1e781` soc/sifive/sifive_freedom: add SiFive Freedom U540 SoC `bfcc2ed18f` boards: convert SiFive HiFive1 Rev. B to Zephyr HWMv2 `330fc38f9f` boards: convert SiFive HiFive1 to Zephyr HWMv2 `b9e06f4c38` soc/sifive/sifive_freedom: add SiFive Freedom E310 SoC `4b90b30b9d` scripts: west_commands: completion: Add hwmv2 complete to fish `0f6842e2fa` scripts: west_commands: completion: Add hwmv2 complete to zsh `b2af1e1737` scripts: west: list_boards: Fix hwmv2 output `686a4b78b8` scripts: west_commands: completion: Add hwmv2 complete to bash `396b6bb856` soc: nxp: fix typo in SoC name `765299c627` soc: broadcom: align SoC names defined in soc.yml to Kconfig SOC setting `7efd46eb41` soc: arm: align SoC names defined in soc.yml to Kconfig SOC setting `505cbc5c42` soc: mec: align SoC names defined in soc.yml to Kconfig SOC setting `951a140701` soc: ti: define SOC name in Kconfig `a795d28810` snippets: Initial HWMv2 support `f9a957e6f6` boards: nordic: nrf9160dk: Fix missing nrf52840 config `df994e7ee8` soc: xilinx: zync7000: Remove xilinx from soc series name `8dfabd56ca` soc: cypress: Add protection guard to file `447b951593` tests: kernel: tickless: Remove old board name `bad5dfa71f` boards: nordic: nrf5340dk: Fix board names `ad2e863f39` soc: atmel: Use new family prefix `3f08e714b2` soc: intel_adsp: hwmv2: Align SOC_SERIES_INTEL_ACE name and value `6734597a76` soc: intel_adsp_cavs: hwmv2: Align SOC_SERIES name and value `2908af0bcc` boards: nrf51dk/dongle: change SoC to nRF51822 `d1ceb29fca` soc: align CONFIG_SOC values to match soc.yml names `4768ccaf70` tests: drivers: gpio: gpio_api_1pin: exclude hifive1 `ebdb0879ad` boards: nxp: s32z2xxdc2: convert to hwmv2 `ae82580d08` boards: nxp: mr_canhubk3: convert to hwmv2 `c5f0defbae` boards: nxp: ucans32k1sic: convert to hwmv2 `1e46cabce6` soc: nxp: convert NXP S32 family to hwmv2 `f2f85133f2` soc: stm32: Rename series path `86642f4e78` soc: stm32: Rename Kconfig SOC_SERIES symbols `c61e807896` soc: stm32: Cleanup Kconfig.defconfig files `ca46c8abc9` tests: Fix board names `fbfed5f48f` maintainers: Update synopsys entries `8cd8b1cc47` boards: synopsys: Add documentation index `6f6cc57a04` boards: arc: hsdk4xd: Convert to v2 `c4c14a54ca` soc: snps_arc_hsdk4xd: Port to HWMv2 `06c2054e5c` boards: arc: iotdk: Convert to v2 `ff0e0fce1b` soc: snps_arc_iot: Port to HWMv2 `334264c46a` boards: arc: emsdp: Convert to v2 `8b947a0e91` soc: snps_emsdp: Port to HWMv2 `990417bbde` tests: Update board names for hwmv2 `e12719154a` boards: arc: em_starterkit: Convert to v2 `437a430fbe` soc: snps_emsk: Port to HWMv2 `f93387f968` boards: arc: hsdk: Convert to v2 `1cf2498b13` soc: snps_arc_hsdk: Port to HWMv2 `47abe81256` boards: arc: nsim: Convert to v2 `1e33786dc4` soc: snps_nsim: Port to HWMv2 `7f081914db` boards: arc: qemu_arc: Convert to v2 `bc97349dbd` soc: snps_qemu: Port to HWMv2 `a9902ff58e` boards: Use zephyr_file for file links `126e1a4e72` boards: Fix invalid documentation links `899f0257c3` boards: stm32wb: Restore missing .defconfig files `790c10b1ee` soc: x86/atom: imply mmu, do not select it `faee62088d` boards: x86: remove qemu_x86_tiny_768 `c34d186a57` x86: atom: remove soc.h with unused content `1be3a9e9d3` x86: remove legacy ia32, use atom instead `60e6b400f9` boards: qemu: move qemu_x86 -> x86 `c4fbac27e8` boards: infineon: Add documentation index `b4dd29a9c4` maintainers: Update paths for hwmv2 `380f5fdb2b` boards: cypress: Add documentation index `9de981be05` boards: arm: xmc47_relax_kit: Convert to v2 `6394e8a348` boards: arm: xmc45_relax_kit: Convert to v2 `04dbf17e19` soc: xmc_4xxx: Port to HWMv2 `c9731f1bce` boards: arm: cy8cproto_063_ble: Convert to v2 `53d41869d1` boards: arm: cy8cproto_062_4343w: Convert to v2 `46c4f01427` boards: arm: cy8ckit_062s4: Convert to v2 `d285e19cf2` boards: arm: cy8ckit_062_wifi_bt: Convert to v2 `2bebd7298c` boards: arm: cy8ckit_062_ble: Convert to v2 `af243274c2` soc: psoc6 and psoc_6: Port to HWMv2 `105a2bae84` cmake: modules: boards: Fix board deprecation for HWMv2 `dca54e000a` cmake: modules: boards: Enhance board aliases for HWMv2 `fc314e8e3f` cmake: modules: boards: Fix BOARD_ALIAS `9a7c2ce6d5` soc: gaisler: Move Kconfig file `1ac56d0501` soc: soc_legacy: mips: Remove out file `c054381a7a` boards: adjust few boards/ paths `4d93b8d9fd` boards: convert all microchip MEC boards to hwmv2 `ab2fcb1245` soc: convert microchip_mec to hwmv2 `ead4b57a7b` soc: arm64: intel_socfpga: hwmv2: Rename SoCs `d4c143d306` MAINTAINERS: intel_socfpga: Adjust to HWMv2 move `70a66ac03a` boards: arm64: intel_socfpga: Move boards to subdirectories `8a85c07799` boards: arm64: intel_socfpga_agilex5_socdk: move to HWMv2 `8c253a99fc` boards: arm64: intel_socfpga_agilex_socdk: move to HWMv2 `ab883b8019` soc: arm64: intel_socfpga: Move and convert to HWMv2 `7c8b7a153b` soc: arm: intel_socfpga_std: Rename with HWMv2 `8dc2b911f6` soc: board: intel_socfpga_std: Align names to 'Cyclone V' `402366117a` soc: arm: intel_socfpga_std: Align board subdirectory `f0a8d12745` boards: arm: cyclonev_socdk: Move to HWMv2 `2271f17a86` soc: arm: intel_socfpga_std: Move and convert to HWMv2 `841c2a9d99` boards: riscv: beaglev_fire: Convert to v2 `3b314531ab` boards: riscv: mpfs_icicle: Convert to v2 `d4ea2bf70b` boards: riscv: m2gl025_miv: Convert to v2 `5256e9fcc3` soc: microchip_miv: Port to HWMv2 `18e5cf1d51` maintainers: Update path for hwmv2 `eab8628f98` boards: arm: qemu_cortex_m3: Convert to v2 `1532f2fee1` soc: ti_lm3s6965: Port to HWMv2 `430ca6a475` maintainers: Update ambiq paths `a9b9b41b91` boards: ambiq: Add index `db0271ecbb` boards: arm: apollo4p_blue_kxr_evb: Convert to v2 `957e2b2061` boards: arm: apollo4p_evb: Convert to v2 `5a90a44454` soc: ambiq: Port to HWMv2 `a20c113fbd` boards: nxp: convert ip_k66f to hwmv2 `34e3852a54` boards: nxp: convert usb_kw24d512 to hwmv2 `20ad604de6` boards: nxp: convert twr_kv58f220m to hwmv2 `2e2a7b7656` boards: nxp: twr_ke18f: convert to hwmv2 `f7dcc2eb5e` boards: nxp: convert rddrone_fmuk66 to hwmv2 `b58e90a2e9` boards: nxp: convert hexiwear to hwmv2 `aae6e9e454` boards: nxp: frdm_kw41z: convert to hwmv2 `1d3baac2d6` boards: nxp: convert frdm_kl25z to hwmv2 `3b1d21483f` boards: nxp: frdm_k82f: port to hwmv2 `6046e6ded9` boards: nxp: port frdm_k64f to hwmv2 `0a7bf9fd79` boards: nxp: port frdm_k22f to hwmv2 `dce697c823` boards: nxp: add toctree placeholder `666a353409` soc: nxp: kinetis: convert kinetis SOC family to hardware model V2 `89f0a6034b` maintainers: Update paths for renesas boards/socs `004bd43c48` tests/samples/snippets: Update board names for hwmv2 `a6d756923d` boards: arm and arm64: rcar_h3ulcb: Convert to v2 `3801216b8d` boards: arm64: rcar_salvator_xs_m3: Convert to v2 `b7cc30aaea` boards: arm: rcar_h3_salvatorx_cr7: Convert to v2 `866427ea29` boards: arm: arduino_uno_r4: Convert to v2 `2689b3f0ee` soc: ra: Port to HWMv2 `e7ebc727c8` boards: arm: da1469x_dk_pro: Convert to v2 `903265b2bb` boards: arm: da14695_dk_usb: Convert to v2 `529a78ed51` soc: smartbond: Port to HWMv2 `97cf636ae0` boards: arm: rcar_spider_cr52: Convert to v2 `6d0c53f3a1` soc: rcar: Port to HWMv2 `44e0aa0668` soc: renesas: rzt2m: Move folder structure for more SoCs `85238fc205` boards: misc: Fixed STM32 based boards doc links `dffc08af56` boards: riscv: niosv_m: move and convert to HWMv2 `545093abe4` boards: riscv: niosv_g: move and convert to HWMv2 `ecfa192f1b` soc: riscv: intel_niosv: move and convert to HWMv2 `fd1e8cdc30` hwmv2: sof: intel_adsp: submanifest provisional link `8bf067e625` doc: boards: intel_adsp: Re-order pages `4833275ccd` MAINTAINERS: intel_adsp: Adjust to HWMv2 move `b9a70e5ea2` soc: intel_adsp: tools: pylint compliance workaround `18c70cc4bf` hwmv2: tests: boards: intel_adsp: Adjust board names `ca52baf9de` hwmv2: boards: intel_adsp: Overhaul board configurations `d1b3bcce64` soc: boards: xtensa: intel_adsp_ace: Rename with HWMv2 `f362a8ae2c` doc: soc: boards: intel_adsp_cavs25: Rename with HWMv2 `51dee5da92` tests: samples: boards: intel_adsp_cavs25: Rename with HWMv2 `e66c35e0d0` boards: xtensa: intel_adsp_cavs25: Rename board with HWMv2 `d1491a4810` soc: boards: xtensa: intel_adsp_cavs25: Rename with HWMv2 `fa0fca79c4` scripts: west: runners: intel_adsp: Adjust path to HWMv2 `acd18bfaf7` boards: xtensa: intel_adsp_ace20_lnl: move and convert to HWMv2 `546c94b958` boards: xtensa: intel_adsp_ace15_mtpm: move and convert to HWMv2 `8aab718c3e` boards: xtensa: intel_adsp_cavs25_tgph: change to board variant `30f17424a4` boards: xtensa: intel_adsp_cavs25: move and convert to HWMv2 `35a97cb524` soc: xtensa: intel_adsp: HWMv2 workaround for SOF config `fdc20fdff6` soc: xtensa: intel_adsp: move and convert to HWMv2 `22dc2b6391` cmake: improved board handling for revisions `2f1e33a2e6` cmake: improve arch error message for invalid arch selection `c47c37d3db` sample: basic: blinky_pwm: Exclude rpi_pico w variant `7a788b9a18` boards: raspberry_pi: rpi_pico: Use full name for w variant `7046b92d41` tests: atmel_sam: adc: Fix sam4e_xpro adc build `253ee9638c` tests: atmel_sam0: Update platform name `ccb4c63324` samples: atmel_sam0: Update platform name `2d4acf9230` boards: arduino_nano_33_iot: Convert to HWMv2 `a60d28969a` boards: arduino_mkrzero: Convert to HWMv2 `0409e51d3f` boards: arduino_zero: Convert to HWMv2 `1b2528df1b` boards: wio_terminal: Convert to HWMv2 `af1096e7ca` boards: ev11l78a: Convert to HWMv2 `0b1db9c53d` boards: adafruit_trinket_m0: Convert to HWMv2 `e9874671e2` boards: adafruit_itsybitsy_m4_express: Convert to HWMv2 `ba6c014071` boards: adafruit_grand_central_m4_express: Convert to HWMv2 `33ad4a51ca` boards: adafruit_feather_m0_lora: Convert to HWMv2 `9812f3d54e` boards: adafruit_feather_m0_basic_proto: Convert to HWMv2 `c76b1fbeca` boards: serpente: Convert to HWMv2 `649789e433` boards: seeeduino_xiao: Convert to HWMv2 `6b3bdb7364` boards: same54_xpro: Convert to HWMv2 `93dda5ee4b` boards: samr34_xpro: Convert to HWMv2 `e48e1f5d5b` boards: samc21n_xpro: Convert to HWMv2 `f11cf73df1` boards: saml21_xpro: Convert to HWMv2 `ac73ed6dcd` boards: samd20_xpro: Convert to HWMv2 `0fdbe3552e` boards: samd21_xpro: Convert to HWMv2 `854cff3905` boards: samr21_xpro: Convert to HWMv2 `a87ea5bc0a` soc: atmel: sam0: Port to HWMv2 `706e5d27cd` boards: riscv: neorv32: Convert to v2 `d1edcdd088` soc: neorv32: Port to HWMv2 `0f7add89ca` boards: native_sim/posix: Add 64bit versions as variants `b6edad8d68` soc: soc_legacy: remove the arm/st_stm32 folder `c58e0822a6` boards: Convert nucleo_f207zg to HWM v2 `b987093a80` soc: v2: stm32: Migrate STM32F2 series `2096fd4652` samples: bluetooth: hci_uart: Fix wrongly converted board names `830f9c5a82` MAINTAINERS: Update Atmel entries `527cd9d8cd` CODEOWNERS: Update Atmel entries `83af7d0c1c` samples: atmel_sam: Update platform name `fd9b84d457` tests: atmel_sam: Update platform name `3c72fe863c` boards: arduino_due: Convert to HWMv2 `37dfacbf9e` boards: RoboKit1: Convert to HWMv2 `1108d7b0ed` boards: sam_v71_xult: Convert to HWMv2 `bed44a5c28` boards: sam_e70_xplained: Convert to HWMv2 `40448c5a9f` boards: sam4s_xplained: Convert to HWMv2 `31273692c0` boards: sam4l_ek: Convert to HWMv2 `35b5d33ef0` boards: sam4e_xpro: Convert to HWMv2 `3b84b9910a` soc: atmel: Port SAM family to HWMv2 `da00d0e7b9` boards: Convert nucleo_wba55cg to HWM v2 `fb2103f89e` boards: Convert nucleo_wba52cg to HWM v2 `1f9a533fbc` soc: st: stm32: Migrate STM32WBA series `3f92f65b28` boards: fix documentation for alientek and blues boards `7646b74aaf` boards: stm32l4: doc: add zephyr_file to defconfig path `fea54ddcd9` boards: Convert adi_eval_adin2111ebz to HWM v2 `d47f1878b1` boards: Convert adi_eval_adin1110ebz to HWM v2 `ae42be236b` boards: Convert swan_r5 to HWM v2 `83bd1a9ecc` boards: Convert stm32l4r9i_disco to HWM v2 `39c26f09ed` boards: Convert stm32l496g_disco to HWM v2 `29d03c970b` boards: Convert stm32l476g_disco to HWM v2 `74acec315c` boards: Convert sensortile_box to HWM v2 `fee6d8676e` boards: Convert pandora_stm32l475 to HWM v2 `008b5d9392` boards: Convert nucleo_l4r5zi to HWM v2 `24e357d623` boards: Convert nucleo_l4a6zg to HWM v2 `2c5f9dcce0` boards: Convert nucleo_l496zg to HWM v2 `4da061646f` boards: Convert nucleo_l476rg to HWM v2 `15956a69b8` tests: drivers: flash: stm32: update platform name `80324f7707` boards: Convert nucleo_l452re_p to HWM v2 `9893e0d111` boards: Convert nucleo_l452re to HWM v2 `46f92b227b` boards: Convert nucleo_l433rc_p to HWM v2 `ed5d1bb4cd` boards: Convert nucleo_l432kc to HWM v2 `325f95ec20` boards: Convert nucleo_l412rb_p to HWM v2 `d055676307` boards: Convert disco_l475_iot1 to HWM v2 `c7a415d92c` boards: Convert b_l4s5i_iot01a to HWM v2 `d15144f582` soc: st: stm32: Migrate STM32L4 series `a63ff71bcb` boards: nrf_bsim: Add new nrf5340 board definitions `b53c6f412c` boards: nrf_bsim: Remove redundant option setting `83eb4fc069` MAINTAINERS: intel_ish: Adjust to HWMv2 move `715685b19f` boards: x86: intel_ish: move and convert intel_ish boards to HWMv2 `5b9ef94106` soc: x86: intel_ish: move and convert to HWMv2 `12b297707a` boards: Convert stm32wb5mmg to HWM v2 `cdcea932bc` boards: Convert stm32wb5mm_dk to HWM v2 `0a3ae2b223` boards: Convert nucleo_wb55rg to HWM v2 `20b4ce17d5` soc: st: stm32: Migrate STM32WB series `47c65400d6` soc: st: stm32: fix stm32l0 family `59ec56f9e6` boards: Convert stm32h573i_dk to HWM v2 `dc5977dbba` boards: Convert nucleo_h563zi to HWM v2 `a6e4928543` soc: st: stm32: Migrate STM32H5 series `99f248e048` soc: stm32u5: Fix references after conversion to hw modelv2 `15f16834e6` boards: Convert stm32u5a9j_dk to HWM v2 `c1ee449ef1` boards: Convert sensortile_box_pro to HWM v2 `db4deddf9d` boards: Convert nucleo_u5a5zj_q to HWM v2 `2fd3ed43d2` boards: Convert nucleo_u575zi_q to HWM v2 `902fceb173` boards: Convert b_u585i_iot02a to HWM v2 `d716ca1a10` soc: st: Migrate stm32u5 series to new hw model `b7abc89428` hwmv2: boards: x86: doc: Adjust common docs to new locations `69b334f54b` MAINTAINERS: Change paths to native and nrfbsim boards `614611a528` boards: nrf_bsim: Convert to HW model v2 `5821b9ec2e` board: native_sim/posix: Convert to hwmv2 `04cbad174e` soc: native: Convert to HWMv2 `24ca0febfc` boards: nrf_bsim: Fix path to pinctrl_soc.h `9a32559a2d` cmake: FindHostTools: Fix for hwmv2 for host based targets `c4b11e0251` boards: longan_nano: port to HWMv2 `97edd05be3` boards: gd32vf103c_starter: port to HWMv2 `9cf624c410` boards: gd32vf103v_eval: port to HWMv2 `b40bf25e5e` soc: gd_gd32: reorganize folders `71600d7e95` soc: gd_gd32: move pinctrl_soc.h content back to soc folder `2bd84a1bc5` soc: gd_gd32: port gd32vf103 series to HWMv2 `9dc342143b` boards: doc: fix a bunch of broken reference `10392d693d` doc: boards: split out shields `b2def8ed3a` boards: acrn: fix title `bf7d3efe78` boards: riscv: tlsr9518adk80d: Convert to v2 `c579770e1d` soc: telink_tlsr: Port to HWMv2 `9131540109` soc: stm32h7: Couple of tests fixes following migration `2efcefc089` boards: Convert stm32h7b3i_dk to HWM v2 `d9b295a85b` boards: Convert stm32h750b_dk to HWM v2 `a2f56bdcd5` boards: Convert stm32h747i_disco to HWM v2 `00314155df` boards: Convert stm32h735g_disco to HWM v2 `b08819dff7` boards: Convert nucleo_h7a3zi_q to HWM v2 `56456c16e5` boards: Convert nucleo_h753zi to HWM v2 `91f9198dc4` boards: Convert nucleo_h745zi_q to HWM v2 `96f1bafbf9` boards: Convert nucleo_h743zi to HWM v2 `b290f25baa` boards: Convert nucleo_h723zg to HWM v2 `9fbe6bf191` boards: Convert fk7b0m1_vbt6 to HWM v2 `44bcfe57c7` boards: Convert arduino_portenta_h7 to HWM v2 `4c86af7eae` boards: Convert arduino_opta_m4 to HWM v2 `b4f852f738` boards: Convert arduino_giga_r1 to HWM v2 `bac9789264` soc: st: Migrate stm32h7 series to new hw model `a954e1722d` boards: stm32l0: Cleanup board _defconfig files after migration `7e8515b241` boards: Convert ronoth_lodev to HWM v2 `25246c21ef` boards: Convert nucleo_l073rz to HWM v2 `09396eb2e6` boards: Convert nucleo_l053r8 to HWM v2 `70c004fd83` boards: Convert nucleo_l031k6 to HWM v2 `e3daa98e79` boards: Convert nucleo_l011k4 to HWM v2 `a2de60c6da` boards: Convert dragino_nbsn95 to HWM v2 `e877ce9cec` boards: Convert dragino_lsn50 to HWM v2 `2b50218c23` boards: Convert b_l072z_lrwan1 to HWM v2 `4a65f55916` soc: st: Migrate stm32l0 series to new hw model `cc6e6be01f` boards: fix few leftover ITE board references `a837303268` soc: stm32: Protect Kconfig symbols by SOC_FAMILY_STM32 `88e5959f17` hwm2: Fix unit_testing: it is also a legacy board by now `95e06e8663` cmake: Fix uses of old SOC path `d517d3cc24` soc: set linker script for ra4m1 `68f9aeddab` soc: ite: add SOC_SERIES_ITE_IT8XXX2 guards around ITE options `ccf4f48f01` boards: convert ite boards to hwmv2 `4a6e286a3b` soc: convert ite_ec to hwmv2 `12e375f826` doc: handle arch / soc / board docs in new hardware model `b4db917de9` boards: Add documentation index files `d6e0d27efe` samples: bluetooth: hci_uart: Fix wrong named files `bc16a7a727` tests: Update board names for hwmv2 `2834883843` boards: riscv: rv32m1_vega: Convert to v2 `9c68231ba9` soc: openisa_rv32m1: Port to HWMv2 `986e9619fd` soc: starfive_jh71xx: Port to HWMv2 `e82932e787` boards: riscv: litex_vexriscv: Convert to v2 `cb9339f88f` soc: litex_vexriscv: Port to HWMv2 `1cd4c34654` boards: riscv: opentitan_earlgrey: Convert to v2 `92eadf06b8` soc: opentitan: Port to HWMv2 `a8659e170b` boards: riscv: titanium_ti60_f225: Convert to v2 `359133d725` soc: efinix_sapphire: Port to HWMv2 `6d466429ed` soc: soc_legacy: riscv: litex_vexriscv: Add updated paths `a1ff441eb3` boards: riscv: adp_xc7k_ae350: Convert to v2 `ef82a8255c` soc: ae350: Port to HWMv2 `282204758a` samples: boards: stm32: ccm: fix include path `8ca9341195` samples: basic: threads: fix broken reference `8a947f446d` boards: nrf52840dk: fix rst syntax `324cb41153` boards: nordic_nrf: fix broken references `963c74df1c` boards: intel_(ish\|adl\|ehl\|rpl), up_squared: fix include paths `8d518ce504` boards: legacy: drop empty folders `0fef0cef5b` boards: mps2: fix table formatting `e52ccc244f` boards: add HWMv2 board index `c7426eca5e` boards: arm: add legacy tag `1eba9d8a8f` boards: acrn: create vendor folder `8d92edc727` tests: kernel: Adjust qemu_x86_tiny_768 configuration HWMv2 `75117d1b2d` scripts: ensure posix path is used with --cmakeformat `0b0384b56a` maintainers: update paths after HWMv2 changes `c1b77b223d` boards: arm: pan1783: Convert to v2 `91a077b2ab` boards: posix: nrf_bsim: Update paths `413b6c2a40` cmake: modules: configuration_files: Add board identifier overlay file `4f572ba24f` treewide: Update board names for hwmv2 `cb348c7edf` boards: arm: nrf54l15pdk_nrf54l15: Convert to v2 `811ad90566` boards: arm: nrf54h20pdk_nrf54h20: Convert to v2 `d44ef90cf8` soc: nordic_nrf: Migrate nRF54H/nRF54L to v2 and fix nrf `c860f205de` boards: arm: nrf9151dk_nrf9151: Convert to v2 `fba98a1763` soc: nordic_nrf: Migrate nRF9151 to v2 `5c156a2d35` boards: arm: 96b_carbon_nrf51: Convert to v2 `cfc47a3a4b` boards: arm: nrf9161dk_nrf9161: Convert to v2 `37129b4e44` boards: arm: nrf9131ek_nrf9131: Convert to v2 `a923beba5d` boards: arm: bl5340_dvk: Convert to v2 `d242b2703b` boards: arm: raytac_mdbt53v_db_40_nrf5340: Convert to v2 `9c80d4e644` boards: arm: raytac_mdbt53_db_40: Convert to v2 `28268c4938` boards: arm: nrf5340_audio_dk_nrf5340: Convert to v2 `33ad2b5bc6` boards: arm: thingy53_nrf5340: Convert to v2 `40daa94f2d` boards: arm: nrf9160_innblue22: Convert to v2 `2b0dbb9d51` boards: arm: nrf9160_innblue21: Convert to v2 `ee6f7697ac` boards: arm: sparkfun_thing_plus_nrf9160: Convert to v2 `594e4bad6b` boards: arm: circuitdojo_feather_nrf9160: Convert to v2 `a5803ba099` boards: arm: actinius_icarus: Convert to v2 `db8c275456` boards: arm: actinius_icarus_bee: Convert to v2 `30177cf53d` boards: arm: actinius_icarus_som: Convert to v2 `486504cf24` boards: arm: actinius_icarus_som_dk: Convert to v2 `dd0672a64c` boards: arm: nrf9160dk_: Convert to v2 `c1565b3d14` boards: arm: xiao_ble: Convert to v2 `6dd2723314` boards: arm: qemu_cortex_m0: Convert to v2 `ee1ce24a42` boards: arm: bbc_microbit: Convert to v2 `1952d559f2` boards: arm: rm1xx_dvk: Convert to v2 `9e12c3d8bd` boards: arm: nrf51dongle_nrf51422: Convert to v2 `0ffbc1da33` boards: arm: nrf51_blenano: Convert to v2 `be52dfb7b6` boards: arm: nrf51_vbluno51: Convert to v2 `4c29d1827f` boards: arm: nrf51_ble400: Convert to v2 `5b4a9556fd` boards: arm: raytac_mdbt53_db_40_nrf5340: Fix typo `69e5d87a15` boards: arm: contextualelectronics_abc: Convert to v2 `5e4ace1bbe` boards: arm: degu_evk: Convert to v2 `2762460a64` boards: arm: pan1781_evb: Convert to v2 `fdc3913e76` boards: arm: ubx_evkninab1_nrf52832: Convert to v2 `9c9c3a09a1` boards: arm: holyiot_yj16019: Convert to v2 `109edc296f` boards: arm: blueclover_plt_demo_v2_nrf52832: Convert to v2 `7bfcdbbe8f` boards: arm: decawave_dwm1001_dev: Convert to v2 `0fbb543983` boards: arm: acn52832: Convert to v2 `073e0f8080` boards: arm: we_proteus2ev_nrf52832: Convert to v2 `197a19f396` boards: arm: ebyte_e73_tbb_nrf52832: Convert to v2 `1616fc8ae5` boards: arm: nrf52_vbluno52: Convert to v2 `5622077738` boards: arm: nrf52_sparkfun: Convert to v2 `a6289516e4` boards: arm: 96b_nitrogen: Convert to v2 `439d836883` boards: arm: nrf52_blenano2: Convert to v2 `16e65f09c4` boards: arm: arduino_nicla_sense_me: Convert to v2 `862efd5a21` boards: arm: thingy52_nrf52832: Convert to v2 `dede0f6cd3` boards: arm: nrf52_adafruit_feather: Convert to v2 `91e864ea29` boards: arm: nrf52832_mdk: Convert to v2 `47ec3e416b` boards: arm: ruuvi_ruuvitag: Convert to v2 `52f797a227` boards: arm: pinetime_devkit0: Convert to v2 `433db339f9` boards: arm: ubx_evkannab1_nrf52832: Convert to v2 `a646d3f2d5` boards: arm: ubx_bmd300eval_nrf52832: Convert to v2 `d0d434bf86` cmake: print identifier instead of variant `c3f5ed8157` boards: arm: we_proteus3ev_nrf52840: Convert to v2 `eecff8ee7a` boards: arm: nrf52840_mdk_usb_dongle: Convert to v2 `34507614f6` boards: arm: nrf52840_mdk: Convert to v2 `f02b56cb96` boards: arm: nrf52840_blip: Convert to v2 `600c55c92a` boards: arm: nrf52840_papyr: Convert to v2 `f294bfc5e4` boards: arm: reel_board: Convert to v2 `882524d2a0` boards: arm: nrf21540dk_nrf52840: Convert to v2 `4bce0e9b39` boards: arm: nrf52840dongle_nrf52840: Convert to v2 `d0229c771f` boards: arm: particle_argon: Convert to v2 `23a0570e64` boards: arm: particle_boron: Convert to v2 `b6d3e1764f` boards: arm: particle_xenon: Convert to v2 `499f3e7902` boards: arm: rak5010_nrf52840: Convert to v2 `9ae6b1804d` boards: arm: rak4631_nrf52840: Convert to v2 `fe2c90da5c` boards: arm: pinnacle_100_dvk: Convert to v2 `3d4d46698c` boards: arm: ubx_evkninab3_nrf52840: Convert to v2 `b1afbf0158` boards: arm: ubx_bmd380eval_nrf52840: Convert to v2 `9f9897c872` boards: arm: ubx_bmd345eval_nrf52840: Convert to v2 `f7fb2030c7` boards: arm: ubx_bmd340eval_nrf52840: Convert to v2 `7186432662` boards: arm: raytac_mdbt50q_db_40_nrf52840: Convert to v2 `32c4bdc0c4` boards: arm: pan1780_evb: Convert to v2 `7b64c638a8` boards: arm: pan1770_evb: Convert to v2 `156ee8ad8a` boards: arm: mg100: Convert to v2 `3d33dadeb0` boards: arm: arduino_nano_33_ble: Convert to v2 `4fee7371d2` boards: arm: adafruit_itsybitsy_nrf52840: Convert to v2 `ad37a0c222` boards: arm: adafruit_feather_nrf52840: Convert to v2 `cf85b7169f` boards: arm: bt510: Convert to v2 `44b67ac430` boards: arm: bt610: Convert to v2 `7dbb65d371` boards: arm: ubx_evkninab4_nrf52833: Convert to v2 `5e79cb957d` boards: arm: raytac_mdbt50q_db_33_nrf52833: Convert to v2 `12bd83a218` boards: arm: pan1782_evb: Convert to v2 `1a135ec352` boards: arm: bbc_microbit_v2: Convert to v2 `4dbe97e5ea` boards: arm: nrf52833dk: Convert to v2 `d632b90043` boards: arm: ubx_bmd360eval_nrf52811: Convert to v2 `cc1a30f24b` boards: arm: we_ophelia1ev_nrf52805: Convert to v2 `df0df9000b` boards: arm: ubx_bmd330eval_nrf52810: Convert to v2 `d2c7972a9a` boards: arm: nrf52dk: Convert to v2 `202c2bf447` boards: arm: bl654_sensor_board: Convert to v2 `c3e36f2042` boards: arm: bl654_usb: Convert to v2 `b9dd58aea1` boards: arm: bl654_dvk: Convert to v2 `0e1898b093` boards: arm: bl653_dvk: Convert to v2 `286f4a7524` boards: arm: bl652_dvk: Convert to v2 `d1709cdb37` boards: update nRF51dk board to board scheme v2. `8f040cff2c` boards: Update nrf5340dk_nrf5340 to HWMv2 scheme `8c90fae8e0` boards: update nRF52840dk_nrf52840/nrf52811 board to board scheme v2. `c828dcc60e` boards: common: openocd-nrf5: Add HWMv2 support `c79f1b0d94` kconfig: soc: adopt Nordic SoC series to support hw model v2 scheme `3584b30fc1` tests: Update board names for hwmv2 `94024d940e` boards: arm: arty_a7: Convert to v2 `8053c3a8df` boards: arm: scobc_module1: Convert to v2 `d5473b76fe` soc: designstart: Port to HWMv2 `f5792b05e7` boards: arm: fvp_baser_aemv8r_aarch32: Convert to v2 `ff202daa8e` soc: fvp_aemv8r_aarch32: Port to HWMv2 `e66cbc2945` boards: arm: v2m_musca_s1: Convert to v2 `33b47b2edb` boards: arm: v2m_musca_b1: Convert to v2 `baeebd31d2` soc: musca: Port to HWMv2 `73b257a3f9` boards: arm: v2m_beetle: Convert to v2 `85de0888ec` soc: beetle: Port to HWMv2 `867960a891` manifest: Update modules `6ca677ed3a` boards: arm: mps2: Convert to v2 `bcf4ad19d4` twister: build_dir: convert / to _ to support hwmv2 `0ac386683f` soc: Kconfig.v2: Add SOC_PART_NUMBER `9242c3c78f` soc: stm32: soc.yml: reorder series `248d17f160` boards: stm32: cleanup `0a67265e99` boards: stm32: fix for boards with revisions `f8d44317ee` soc: stm32l5: Rename overlays for nucleo_l552ze_q ns target. `400343d17e` soc: stm32: Set default on USE_DT_CODE_PARTITION `d783ef549a` soc: stm32l5: Update stm32l5 non secure targets in various places `643aeac552` boards: Convert stm32l562e_dk to HWM v2 `e601d64344` boards: Convert nucleo_l552ze_q to HWM v2 `2f7a387b32` soc: st: Migrate stm32l5 series to new hw model `519752efcd` boards: xenvm: doc: Remove reference to deleted file `06263dd717` boards: xenvm: Unset HEAP_MEM_POOL_SIZE in gicv3 variant `66b0df5526` boards: qemu_cortex_a53: Fix Kconfig warnings in SMP variant `fa07bd9419` boards: mps3: Fix non-secure variant `8f6f0726dd` boards: Move xenvm under xen `7b155a7031` boards: Raspberry Pi vendor fix `804697afa5` boards: Move 96b_aerocore to 96boards `d2f001e320` boards: x86: acrn: move and convert to HWMv2 `ec7f7b3c30` tests: kernel: qemu_x86: adjust to the HWMv2 `89dfcddc7e` boards: x86: qemu_x86_tiny@768: change to board variant `eb724eb6a7` boards: x86: qemu_x86: optimize default HWMv2 configurations `6f1043cde6` boards: x86: qemu_x86: move and convert to HWMv2 `cab924cbfb` soc: x86: ia32: move and convert to HWMv2 `237fdff918` soc: x86: lakemont: move and convert to HWMv2 `03042b7704` boards: move 96b_carbon to 96boards folder `767b94414e` boards: rename vendor seeed to seeed_studio `07fa3a3d79` boards: Convert olimex_lora_stm32wl_devkit to HWM v2 `ba01d3beca` boards: Convert nucleo_wl55jc to HWM v2 `7ce84f4041` boards: Convert lora_e5_mini to HWM v2 `b988bae576` boards: Convert lora_e5_dev_board to HWM v2 `6fbf39c726` soc: v2: stm32: Migrate STM32WL series `4a41878442` soc: st: stm32g4: add missing include `1e79ba15f6` boards: Convert weact_stm32g431_core to HWM v2 `ffdcb60185` boards: Convert nucleo_g474re to HWM v2 `d6acb08d3e` boards: Convert nucleo_g431rb to HWM v2 `90e592ffd1` boards: Convert b_g474e_dpow1 to HWM v2 `eb8a7e3441` soc: st: stm32: Migrate STM32G4 series `ada469f237` tests: Update board names for hwmv2 `0342433187` boards: arm: npcx9m6f_evb: Convert to v2 `c10248d964` boards: arm: npcx7m6fb_evb: Convert to v2 `21ddc5e6a6` boards: arm: npcx4m8f_evb: Convert to v2 `5500f3ef21` soc: npcx: Port to HWMv2 `e7baf09ede` soc: m48x: Port to HWMv2 `5bae4a6480` boards: arm: numaker_pfm_m467: Convert to v2 `3b0bd70c8c` soc: m46x: Port to HWMv2 `d52eab9e83` boards: Convert stm32g081b_eval to HWM v2 `6f2835cb11` boards: Convert stm32g071b_disco to HWM v2 `ca36d331d2` boards: Convert stm32g0316_disco to HWM v2 `662cc4e09b` boards: Convert nucleo_g0b1re to HWM v2 `dd9bc29769` boards: Convert nucleo_g071rb to HWM v2 `353da23ffb` boards: Convert nucleo_g070rb to HWM v2 `acc932b424` boards: Convert nucleo_g031k8 to HWM v2 `cea9b140fd` boards: Convert google_twinkie_v2 to HWM v2 `52e025943a` soc: st: stm32: Migrate STM32G0 series `1c7347686a` ci: update check_compliance to not create duplicate lines in Kconfig `9debd98799` hwmv2: boards: up_squared_pro_700: Add missed intel_adl changes `adab07c42f` boards: Convert msp_exp432p401r_launchxl to HWM v2 `642aacdcdf` soc: ti_simplelink: Add missing SoC `48637066d3` boards: Fix file paths in documentation `e983bc2a23` samples/tests: Fix mps3 board name `61e0f32716` boards: Convert stm32f3_seco_d23 to HWM v2 `a1688ff641` boards: Convert stm32f3_disco to HWM v2 `35fb228599` boards: Convert stm32373c_eval to HWM v2 `10e5d1122b` boards: Convert nucleo_f334r8 to HWM v2 `c319cb19f0` boards: Convert nucleo_f303re to HWM v2 `11725ccac1` boards: Convert nucleo_f303k8 to HWM v2 `400f7f6a4f` boards: Convert nucleo_f302r8 to HWM v2 `8d84861390` soc: v2: stm32: Migrate STM32F3 series `85b9eee7e8` boards: arm: kv260_r5: Convert to v2 `dafbd638e4` boards: arm: mercury_xu: Convert to v2 `3ecd12f415` boards: arm: qemu_cortex_r5: Convert to v2 `5db2390e9d` soc: xilinx_zyncmp: Port to HWMv2 `9ba8195cdc` boards: arm: qemu_cortex_a9: Convert to v2 `8e94b85361` boards: arm: zybo: Convert to v2 `c970127fc2` soc: xilinx_zynq7000: Port to HWMv2 `394c75373c` boards: arm: ast1030_evb: Convert to v2 `f2a1cc8714` soc: ast10x0: Port to HWMv2 `28f3f25945` boards: arm: cc3235sf_launchxl: Convert to v2 `c3e480f740` boards: arm: cc3220sf_launchxl: Convert to v2 `fd5847123f` boards: arm: beagleconnect_freedom: Convert to v2 `76ba9a0587` boards: arm: cc1352p1_launchxl: Convert to v2 `719baa8850` boards: arm: cc1352r1_launchxl: Convert to v2 `5060a61ae1` boards: arm: cc1352r_sensortag: Convert to v2 `99584be1c5` boards: arm: cc26x2r1_launchxl: Convert to v2 `2dc8933942` soc: ti_simplelink: Port to HWMv2 `a5b004663b` scripts/utils/board_v1_to_v2.py: couple of fixes `77c2c333e5` boards: move 96b_stm32_sensor_mez to 96boards `c14ff98650` boards: stm32f411e_disco: delete obsolete file `bcdc268ccf` boards: Convert stm32mp157c_dk2 to HWM v2 `0c8ba92e1f` boards: Convert 96b_avenger96 to HWM v2 `b54fe33077` soc: v2: stm32: Migrate STM32MP1 series `2ba3639b2a` boards: Convert nucleo_c031c6 to HWM v2 `dbc5ed79f5` soc: st: stm32: Migrate STM32C0 series `ce6d493aa3` boards: Convert stm32l1_disco to HWM v2 `a28086a9ca` boards: Convert nucleo_l152re to HWM v2 `1b2a511d06` boards: Convert 96b_wistrio to HWM v2 `ce281f09ab` soc: v2: stm32: Migrate STM32L1 series `cdb5364fd7` boards: Convert stm32f769i_disco to HWM v2 `768f173dcb` boards: Convert stm32f7508_dk to HWM v2 `21bbbbd9cb` boards: Convert stm32f746g_disco to HWM v2 `bab4265693` boards: Convert stm32f723e_disco to HWM v2 `58f8fe82ba` boards: Convert nucleo_f767zi to HWM v2 `37e9084070` boards: Convert nucleo_f756zg to HWM v2 `d467e7053a` boards: Convert nucleo_f746zg to HWM v2 `5f2808d7cc` boards: Convert nucleo_f722ze to HWM v2 `bbb73e7550` soc: st: Migrate stm32f7 series to new hw model `e9094afc4d` soc: st: stm32: stm32f4: change SOC_STM32F405XG to SOC_STM32F405XX `a1712cdd53` boards: Convert stm32f4_disco to HWM v2 `5be404b365` boards: Convert stm32f469i_disco to HWM v2 `baaa697ab2` boards: Convert stm32f429i_disc1 to HWM v2 `69ecab3c90` boards: Convert stm32f412g_disco to HWM v2 `2a572e3fb0` boards: Convert stm32f411e_disco to HWM v2 `ecfbf42757` boards: Convert stm32f401_mini to HWM v2 `e0191d03bb` boards: Convert steval_fcu001v1 to HWM v2 `4454648976` boards: Convert segger_trb_stm32f407 to HWM v2 `f0ad6ee6b8` boards: Convert olimex_stm32_p405 to HWM v2 `1f5e228ec8` boards: Convert olimex_stm32_h407 to HWM v2 `834bdb615e` boards: Convert olimex_stm32_h405 to HWM v2 `8f27fa8de2` boards: Convert olimex_stm32_e407 to HWM v2 `f8633a9038` boards: Convert nucleo_f446ze to HWM v2 `07e0bd2c07` boards: Convert nucleo_f446re to HWM v2 `24d7f625dc` boards: Convert nucleo_f429zi to HWM v2 `157a8cde53` boards: Convert nucleo_f413zh to HWM v2 `4ec99c31b0` boards: Convert nucleo_f412zg to HWM v2 `a21546140a` boards: Convert nucleo_f411re to HWM v2 `43f01ab6de` boards: Convert nucleo_f410rb to HWM v2 `60c16bcb8b` boards: Convert nucleo_f401re to HWM v2 `2db228d730` boards: Convert mikroe_mini_m4_for_stm32 to HWM v2 `73fc26225c` boards: Convert mikroe_clicker_2 to HWM v2 `6b62d90114` boards: Convert google_dragonclaw to HWM v2 `fa845af309` boards: Convert blackpill_f411ce to HWM v2 `5c8c3c3be0` boards: Convert blackpill_f401ce to HWM v2 `3c02db1290` boards: Convert blackpill_f401cc to HWM v2 `7eeb723cb7` boards: Convert black_f407zg_pro to HWM v2 `4f9461d068` boards: Convert black_f407ve to HWM v2 `a821de8532` boards: Convert az3166_iotdevkit to HWM v2 `ba580c7236` boards: Convert adi_sdp_k1 to HWM v2 `eb272ddf19` boards: Convert adafruit_feather_stm32f405 to HWM v2 `58ed121c3a` boards: Convert 96b_stm32_sensor_mez to HWM v2 `b0d70959d3` boards: Convert 96b_neonkey to HWM v2 `b1088baadc` boards: Convert 96b_carbon to HWM v2 `18d867b0a9` boards: Convert 96b_argonkey to HWM v2 `ee6ede7119` boards: Convert 96b_aerocore2 to HWM v2 `b48e70ead9` soc: v2: stm32: Migrate STM32F4 series `14d2b955da` cmake: convert path to CMake style before writing Kconfig files `9c4ac6a202` boards: posix: bsim: Update paths `14b57f56d7` tests: drivers: gpio: gpio_ite_it8xxx2_v2: Temp fix `f3b173be18` scripts: board_v1_to_v2: Update following move to boards_legacy `05b50f6691` cmake: CMake soc dir variable improvements for HWMv2 `a188e01a12` hwmv2: move all ported boards and socs to their final location `22c53e97b5` hwmv2: move all non-ported legacy boards and socs to legacy folders `53f3b181b0` soc: ti_k3: Port to HWMv2 `9f19a2075a` soc: rk3568: Port to HWMv2 `b8928b1628` soc: rk3399: Port to HWMv2 `cda3a74868` boards: arm64: qemu_kvm_arm64: Convert to v2 `70d704bd20` soc: x86: atom: move and convert to HWMv2 `4789e1068e` boards: x86: intel_rpl: move and convert raptor_lake boards to HWMv2 `384307e3dc` soc: x86: raptor_lake: move and convert to HWMv2 `ed025df674` boards: x86: intel_ehl: move and convert elkhart_lake boards to HWMv2 `994b6e1731` soc: x86: elkhart_lake: move and convert to HWMv2 `73b30a04cf` boards: x86: up_squared_pro_7000: move and convert to HWMv2 `83b133c207` boards: x86: intel_adl: move and convert alder_lake boards to HWMv2 `847a12f1e4` soc: alder_lake: move and convert to HWMv2 `67f4c8d2a1` samples: up_squared: adjust gpio_counter to HWMv2 `5326b5bfc0` boards: x86: up_squared: move and convert to HWMv2 `cfd5e691b4` soc: apollo_lake: move and convert to HWMv2 `ac9c235741` boards: xtensa: qemu_xtensa: Convert to v2 `f198c3a761` ci: update to osource for soc/Kconfig.defconfig files `e438e6cad4` ci: add SOC_SERIES_ as false positive in check_compliance.py `95e34da7c1` soc: v2: Convert st_stm32 to st/stm32 `313717df76` soc: mps3: Fix missing family `392c3969ed` boards: arm: am62x_m4: Convert to v2 `8f245d764d` tests: Update board names for hwmv2 `8f71bb7b4f` boards: arm64: khadas_edgev: Convert to v2 `e27d23aad0` soc: rk3399: Port to HWMv2 `80823b860e` boards: arm64: roc_rk3568_pc: Convert to v2 `72e4483dec` soc: rk3568: Port to HWMv2 `bed94669e3` boards: arm64: phycore_am62x_a53: Convert to v2 `c01af5a7b8` soc: ti_k3: Port to HWMv2 `1e563b4ca3` boards: arm64: xenvm: Convert to v2 `76e484adae` soc: xenvm: Port to HWMv2 `34412f7fe2` boards: arm64: rpi_4b: Convert to v2 `9be50e2ca9` soc: bcm2711: Port to HWMv2 `bbbed12c2f` boards: arm64: qemu_kvm_arm64: Convert to v2 `4f5ec7ff8f` soc: qemu_virt_arm64: Port to HWMv2 `d8d1b9f200` boards: arm64: qemu_cortex_a53: Convert to v2 `30bd34b31e` soc: qemu_cortex_a53: Port to HWMv2 `c20d0dcbb6` boards: arm64: fvp_baser_aemv8r: Convert to v2 `02ed6af463` boards: arm64: fvp_base_revc_2xaemv8a: Convert to v2 `1b175003a4` soc: fvp_aemv8*: Port to HWMv2 `de231b911d` boards: v2: Clean up obsolete comments `aa9597f6d9` boards: Convert waveshare_open103z to HWM v2 `9644828c81` boards: Convert stm32vl_disco to HWM v2 `86ab2bd430` boards: Convert stm32_min_dev to HWM v2 `d88d3ddcc4` boards: Convert stm32f103_mini to HWM v2 `0ccc0204e1` boards: Convert stm3210c_eval to HWM v2 `dd9972d782` boards: Convert olimex_stm32_h103 to HWM v2 `a2c2e1406d` boards: Convert olimexino_stm32 to HWM v2 `2d9c62e118` boards: Convert nucleo_f103rb to HWM v2 `e8ba99dc59` soc: v2: stm32: Migrate STM32F1 series `9a93916604` tests: Update board names for hwmv2 `9c4d94844d` boards: arm: bcm958401m2: Convert to v2 `feaf4ffba1` boards: arm: bcm958402m2: Convert to v2 `87f0827121` soc: bcm_vk: Port to HWMv2 `4526be24a5` boards: arm: quick_feather: Convert to v2 `cd921d2b97` boards: arm: qomu: Convert to v2 `b3c04051fc` soc: quicklogic_eos_s3: Port to HWMv2 `a73a9e7533` boards: v2: Clean up obsolete comments `8d87bcc167` boards: Convert stm32f0_disco to HWM v2 `1933585785` boards: Convert stm32f072_eval to HWM v2 `6f9fe5429d` boards: Convert stm32f072b_disco to HWM v2 `9dc78e4025` boards: Convert stm32f030_demo to HWM v2 `35113e8923` boards: Convert nucleo_f091rc to HWM v2 `b276aee9a4` boards: Convert nucleo_f070rb to HWM v2 `795f8d611b` boards: Convert nucleo_f042k6 to HWM v2 `2d82646443` boards: Convert nucleo_f031k6 to HWM v2 `959786f12d` boards: Convert nucleo_f030r8 to HWM v2 `81670db2e9` boards: Convert legend to HWM v2 `8980430aad` boards: Convert google_kukui to HWM v2 `ac020f66e0` dts: stm32f0: fix few warnings `5140e4551a` boards: v2: doc: Add vendors `77d640e0c9` soc: v2: stm32: Migrate STM32F0 series `0131e1c159` soc: v2: Add st_stm32 structure and common folder `36b63787a7` boards: v2: Add documentation index for converted boards `ae02fc5047` boards: sparc: qemu_leon3: Convert to v2 `f38f7bb223` boards: sparc: gr716a: Convert to v2 `d3cca3580e` soc: gr716a: Port to HWMv2 `6a8a0c1647` boards: sparc: generic_leon3: Convert to v2 `faf22185ce` soc: leon3: Port to HWMv2 `e94762ecdc` tests: Update board names for hwmv2 `9afcc27e05` boards: xtensa: qemu_xtensa: Convert to v2 `3e4a17018f` soc: dc233c: Port to HWMv2 `9188fdcd78` boards: xtensa: xt-sim: Convert to v2 `fcaa41cb5d` soc: xtensa_sample_controller: Port to HWMv2 `dbc413f7f7` scripts: board_v1_to_v2: Fix CONFIG_SOC_SERIES_ exclusion `6be3d4bc80` kconfig: remove Kconfig BOARD_RPI_PICO_W safe guard. `f4442fa698` boards: v2: Add documentation index for converted boards `ec5fbd67f7` boards: nios2: qemu_nios2: Convert to v2 `d3ef220460` soc: nios2-qemu: Port to HWMv2 `a223f284b5` boards: nios2: altera_max10: Convert to v2 `c381edcb73` soc: nios2f-zephyr: Port to HWMv2 `97401c7d2a` boards: mips: qemu_malta: Convert to v2 `e7a3243a24` soc: qemu_malta: Port to HWMv2 `bec82c690d` boards: v2: Add documentation index for converted boards `94f6f9b636` boards: arm: w5500_evb_pico: Convert to v2 `209235ab6e` boards: arm: sparkfun_pro_micro_rp2040: Convert to v2 `e5b1885907` boards: arm: adafruit_qt_py_rp2040: Convert to v2 `4c750818f9` boards: arm: adafruit_kb2040: Convert to v2 `8d3896caa4` boards: arm: rpi_pico: Convert to v2 `42cff42c42` soc: rpi_pico: Port to HWMv2 `c2df4ca9cb` scripts: improve yaml schema and board.yml validation for revisions `3970f90f71` cmake: clear BOARD_CACHE when invalid board identifier is given `3a70ee9ccd` cmake: improve board revision handling `3cda715fae` scripts: board_v1_to_v2: Don't add select CONFIG_SOC_SERIES_FOO `dc56a543f3` scripts: board_v1_to_v2: Add License + copyright `87147f88c4` cmake: prefer cache BOARD_IDENTIFIER over extracting from BOARD `65f5dc5b8c` cmake: fail when board identifier is applied in legacy hw model `7db2b6efd8` cmake: cache BOARD_IDENTIFIER to preserve it between CMake invocations `85dddac5a2` scripts: using extend in list_boards for variant list `6ae5c4e7fd` scripts: utils: add board v1->v2 conversion utility `ef834a12d0` maintainers: update Renesas RZT2M path `3ab7830625` boards: renesas: add documentation entry `a0c2ca0491` boards: arm: add documentation entry `27ff3654b7` boards: gigadevice: add documentation entry `6e02f43c0a` maintainers: update GD32 paths `1bfcf1d974` boards: gd32l233r_eval: convert to HWMv2 `6e621ee43f` boards: gd32f470i_eval: convert to HWMv2 `219b149768` boards: gd32f450z_eval: convert to HWMv2 `91c52b0d39` boards: gd32f450v_start: convert to HWMv2 `f0e0a973f6` boards: gd32f407v_start: convert to HWMv2 `6f592b64c9` boards: gd32f403z_eval: convert to HWMv2 `4bcb4b2ac8` boards: gd32f350r_eval: convert to HWMv2 `fdc7ed6eb0` boards: gd32e507z_eval: convert to HWMv2 `770376250d` boards: gd32e507v_start: convert to HWMv2 `a6d8b92e86` boards: gd32e103v_eval: convert to HWMv2 `a5f8e5daa1` boards: gd32a503v_eval: convert to HWMv2 `5ee799cc5f` boards: gd32f450i_eval: convert to HWMv2 `8aa8ce4ac8` soc: gigadevice: port to HWMv2 `4e203c14c7` cmake: enhanced board entry file handling `312265ee04` scripts: make SoC field mandatory in board.yml `c12ae3bcbc` boards: update Renesas rzt2m board.yml to contain SoC information `c5321c1dbe` cmake: make SoC optional for boards containing a single SoC `bcc06c60ae` scripts: support SoC list output for boards `db9e46010c` twister: update testcase.yaml and sample.yaml to mps3/an547 identifier `a988adee7d` boards: update arm mps3 an547 board to HWMv2 scheme `7dc2c9db0c` soc: use HWMv2 for arm mps3 SoC `c506675b7c` boards: update Renesas Starter Kit+ for RZ/T2M board to HWMv2 scheme `3abb792073` soc: use HWMv2 for renesas_rzt2m SoC `4f52bc646e` cmake: support hw model v2 in arch/Kconfig tree `a712b5005b` scripts: extend kconfig compliance to verify board / SoC scheme v2 `baa55141a1` twister: update twister testplan.py to handle HWMv2 boards `1f026f70eb` boards: extend list_boards.py and update boards CMake module `bd854a3af8` cmake: introduce arch and soc cmake modules for hw model v2 `c9edefa8fd` arch: add existing archs to archs.yml for HWMv2 support `61bbfb5ba2` scripts: introduce list_hardware.py for listing of architectures and SoCs `a4d1980c35` build: board/ soc: introduce hw model v2 scheme Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com> Signed-off-by: Declan Snyder <declan.snyder@nxp.com> Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com> Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com> Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no> Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com> Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com> Signed-off-by: David Leach <david.leach@nxp.com> Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com> Signed-off-by: Anas Nashif <anas.nashif@intel.com> Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com> Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com> Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no> Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com> Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com> Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com> Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com> Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no> Signed-off-by: Francois Ramu <francois.ramu@st.com> Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com> Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com> Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com> Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>	1 year ago
Herman Berget	9135de7a66	Bluetooth: hci: Add hw variant definitions for nrf54H/L Assign new numbers for new soc series and update string conversion function. Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>	1 year ago
Aleksander Wasaznik	433833d9ef	Bluetooth: Support `BT_RECV_WORKQ_BT` with Zephyr LL This patch allows selecting the combination of `CONFIG_BT_RECV_WORKQ_BT` and `BT_LL_SW_SPLIT`. The implementation of `bt_recv_prio` is copied from `hci_raw.c`. This ensures the order of packets is the same as when the controller's `hci_driver.c` is off-chip and sends HCI over UART. Without this patch, the Zephyr LL driver will duplicate some events on behalf of `hci_core`. This duplication is not wanted when `CONFIG_BT_RECV_WORKQ_BT=y`. The above mentioned duplication is not sound and is evidenced in logged warnings, e.g. in `tests/bsim/bluetooth/host/l2cap/stress` with `CONFIG_BT_RECV_WORKQ_BT=y` logging "no transition". This patch is a step towards the deprecation of `CONFIG_BT_RECV_BLOCKING`. `CONFIG_BT_RECV_BLOCKING` is complicated and tightly coupled to `hci_core`. In the future, removing `CONFIG_BT_RECV_BLOCKING` will give a cleaner separation between `hci_core` and the drivers and allow `hci_core` to evolve without changes spilling out into the drivers. Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>	1 year ago
Troels Nilsson	8acca664d2	Bluetooth: Controller: Fix periodic adv data truncation Advertising data has to be truncated at a PDU boundary Similar to earlier fix for extended advertising reports Found in several EBQ tests, including LL/DDI/SCN/BV-25-C, LL/DDI/SCN/BV-21-C and LL/DDI/SCN/BV-46-C Signed-off-by: Troels Nilsson <trnn@demant.com>	1 year ago
Troels Nilsson	89ce3566c0	Bluetooth: Controller: Fix handling of CTEInfo in le_ext_adv_report() Handling of CTEInfo being present was missing; Fixes test failure of LL/DDI/SCN/BV-89-C Signed-off-by: Troels Nilsson <trnn@demant.com>	1 year ago
Vinayak Kariappa Chettimada	818ae7acb0	Bluetooth: Controller: Fix incorrect HCI ISO Data length check Fix incorrect HCI ISO data length check for Broadcast ISO transmissions. Removed initially added code when preliminary support for Broadcast ISO was implemented. Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>	1 year ago
Lingao Meng	0ddb6aa82e	Bluetooth: Host: Use actual user_data size Use actual user_data size not default by 8. Signed-off-by: Lingao Meng <menglingao@xiaomi.com>	2 years ago
Troels Nilsson	3c9d952820	Bluetooth: Controller: Fix failing LL/DDI/SCN/BV-88-C Fixes failing EBQ test LL/DDI/SCN/BV-88-C Extended Scanning, Active, Properly Ignore RFU Fields Several minor modifications made to le_ext_adv_report() to properly ignore any invalid fields present in the received PDUs Signed-off-by: Troels Nilsson <trnn@demant.com>	2 years ago

1 2 3 4 5 ...

602 Commits (d382fca6ff8830fff33cc81097d724e1314af92b)