zephyr

Commit Graph

Author	SHA1	Message	Date
Pisit Sawangvonganan	1bcae0ea9f	style: drivers: comply with MISRA C:2012 Rule 15.6 Add missing braces to comply with MISRA C:2012 Rule 15.6 and also following Zephyr's style guideline. Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>	11 months ago
Matthias Alleman	931628a78a	drivers: ethernet: nxp_enet: Fused MAC address fixes Add required initialisation of OCOTP. The IMXRT10XX variants don't support fuseWords to be greater than 1. MAC0 fuse map address is 0x22 instead of 0x620. Fill in mac_addr buffer correctly. Signed-off-by: Matthias Alleman <matthias.alleman@basalte.be>	11 months ago
Fin Maaß	27aa4bc988	drivers: ethernet: add get_phy function add get_phy function to the ethernet drivers. Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>	12 months ago
Declan Snyder	6ac0d8bf84	drivers: mdio_nxp_enet: Fix busy wait Fix the busy wait in the MDIO driver that was causing timing problems in systems with real time requirements performing tasks more frequently than about a millisecond. Restructure the code to be less redundant and change the busy wait kconfig to microseconds instead of millliseconds. Also actually signal to the mdio driver that it can use the interrupt instead of busy waiting, this seems to have been forgotten. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	1 year ago
Declan Snyder	3f59cf9439	drivers: nxp_enet: Fix CID 363724 This addresses the coverity issue ID 363724. This issue seems to have been a false positive, but the root complaint from coverity was that within the callstack of ENET_Up, some functions use the buffer config pointer as an array, whereas in the zephyr driver it is declared as a singleton. Address it by redeclaring this as an array of size 1 instead of a singleton. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	1 year ago
Declan Snyder	b05d719107	drivers: nxp_enet: Fix CID 392512 This commit fixes coverity issue 392512. The issue was that the return value of clock_control_on was not being checked. Fix by checking the return value. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	1 year ago
Jiafei Pan	f985e75ba1	drivers: eth_nxp_enet: fix MMIO mapping issue Fixed #74370, the issue is caused by the update to introduce MMIO mapping, after MMIO mapping, should use data->base for device base memory address. Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>	1 year ago
Jiafei Pan	cca390d243	drivers: ethernet: eth_enet: add MMIO mapping Adding MMIO mapping support in ENET module driver before MDIO, MAC and PTP drivers initialization, so that they can reuse this mapping. Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>	1 year ago
Jiafei Pan	0c958ae212	drivers: ethernet: eth_enet: remove building error Don't block building in case of there is no unique ID provided. Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>	1 year ago
Jiafei Pan	f1aa5d9391	drivers: eth_nxp_enet: fix cache maintain Need to disable cache maintain by driver in case of using noncache DMA buffer. Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>	1 year ago
Declan Snyder	a5a2dbacbd	drivers: nxp_enet: Support RW6XX series Support RW6xx series in NXP ENET driver. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	1 year ago
Declan Snyder	45d3eb27b8	drivers: nxp_enet: Add fuse map address Add functionality to use fused mac address Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	1 year ago
Declan Snyder	f203a8b193	drivers: nxp_enet: Fix nxp,unique-mac nxp,unique-mac actually is not meant to be universally unique, the LAA bit should therefore be set, and fix the description of the property in the binding to clarify the intended usage of this property. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	1 year ago
Stanislav Poboril	cbb5c5b444	drivers: nxp_enet: Support RGMII mode for ENET_1G - Added nxp,enet1g compatible to distinguish between ENET (nxp,enet) and ENET_1G (nxp,enet1g) peripherals within the same driver. - Added config ETH_NXP_ENET_1G to enable 1G mode of operation on ENET_1G. - Support RGMII mode of connection between MDIO and PHY to be able to work with ENET_1G peripheral and support 1000M speed. - Removed performing of PHY reset before configuring link - it is not desirable for RTL8211F PHY connected to ENET_1G on RT1170. Reset of other PHYs can be performed by PHY driver itself if required. Fixes: #66348 Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>	1 year ago
Declan Snyder	fdbba0341c	drivers: nxp_enet: Deprecate ETH_MCUX Deprecate ETH_MCUX, by: - Marking it as DEPRECATED in Kconfig, obviously. - Unmarking the new driver as experimental. - Putting the new and old drivers in the same folder. - Reworking the menu appearance of the driver selection. Note that technically now it is possible to choose the wrong driver than what is enabled in DT, this is intentional, but the correct one will obviously be enabled by default. - Convert all sample overlays to the new Kconfigs. This was part of the motivation for the shared overlays, as it was causing twister/CI logs to look ugly and misleading due to Kconfig warnings. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	1 year ago
Declan Snyder	ac58f3abe6	drivers: nxp_enet: Generate MAC using eth.h The MAC address macros are ridiculous in this driver. Rewrite to be simpler and use eth.h common function. Also, clarify the mac address generation on the DT overlays. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	1 year ago
Declan Snyder	4be0439bed	drivers: nxp_enet: Convert RX to workqueue Convert from multiple threads for each instance to use one workqueue for all instances. The benefit is to save memory and use a kernel function that already exists for a use case like this. Also introduce the ETH_NXP_ENET_RX_THREAD_PRIORITY kconfig, which makes the thread priority of the workqueue configurable. Finally, remove the code enabling the RxBufferInterrupt, since the meaning of it isn't used currently in this driver. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	1 year ago
Declan Snyder	bc785e076a	drivers: nxp_enet: Add NET DEVICE PM function Add functionality for when NET_POWER_MANAGEMENT (ie PM_DEVICE) is enabled. This function code originally comes from the old eth_mcux driver which was only tested on kinetis family SOCs, so that family kconfig is a dependency for this feature for now. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	1 year ago
Declan Snyder	fe3aefe2ae	drivers: nxp_enet: Remove unused interrupt codes Remove code that does nothing, regarding unused interrupts. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	1 year ago
Declan Snyder	02916828ab	drivers: nxp_enet: Remove unnecessary comments Some comments in this driver are just redundant - the code spells out exactly what the comment says. And some comment blocks are just unnecessary to have. Finally, remove the TODO comment because this is flagged by static analysis and there are already tracking issues for the zero copy enhancement. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	1 year ago
Jukka Rissanen	bcb34705bb	drivers: ethernet: nxp_enet: Remove VLAN code as it is no longer needed The VLAN packets are prepared in Ethernet L2 so no need to have special handling in the driver. Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>	1 year ago
Pieter De Gendt	28e10630c2	drivers: ethernet: eth_enet: Implement HW MAC address filtering Replace the multicast monitor with a HW MAC filter configuration. Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>	1 year ago
Torsten Rasmussen	8dc3f85622	hwmv2: Introduce Hardware model version 2 and convert devices This is a squash of the ``collab-hwm`` branch which converts all in-tree boards to hardware model version 2 including build system changes, board updates and soc conversions. This squash is a combination of the following commits: ca214745a1 soc: Remove soc_legacy folder and move ARM Kconfig `f12cb0979f` scripts: ci: check_compliance: remove HWMv1 checks `1807bcf4d4` boards: mimx8mq_evk: port to HWMv2 `3ec2299c62` soc: nxp: port imx8mq SOC to HWMv2 `8ea02f4e63` boards: verdin_imx8mp: convert to HVMv2 `f2eb7652ce` boards: phyboard_pollux: move to HVMv2 `ab509a5ee0` boards: nxp: mimx8mp_evk: port M7 core to HWMv2 `06ad037f99` soc: nxp: imx8mp: port M7 core to HWMv2 `3f9e706859` boards: mimx8mm_phyboard: convert to HVMv2 `204372d264` boards: imx8mm_evk: port CM4 core to HWMv2 `f82c961a46` soc: nxp: imx8mm: port iMX8MM M4 core to HVMv2 `6987b2e305` boards: pico_pi: convert to HVMv2 `84484e6707` boards: warp7: convert to HWMv2 `ae443d1e3c` boards: meerkat96: port to HWMv2 `e3629c64e6` boards: colibri_imx7d: port to HWMv2 `fc835d893d` soc: nxp: convert iMX7 Dual core to HWMv2 `29ef2f23eb` boards: udoo_neo_full: convert to HWMv2 `fd49b1749e` soc: nxp: convert iMX6 SoloX core to HWMv2 `1e59b7a3fd` soc: nxp: imxrt11xx: only set CONFIG_CPU_HAS_FPU_DOUBLE_PRECISION for M7 `69bb0eb258` hwmv2: MAINTAINERS: Fix NXP maintainer yaml `1c4458890f` boards: firefly: roc_rk3568_pc: Fix SMP configuration `651a4370ad` boards: Fix variants and revisions `196cfda66d` tests/samples: Drop default revision identifiers `6ec6b1d75a` boards: Drop revision from twister identifiers for default revisions `b774cdd59f` scripts: utils: board_v1_to_v2: drop board_legacy prefix `7aa36e6640` boards: riscv: esp32c3_luatos_core: make usb variant `fe25709a9c` twister: add unit_testing soc and board `f88f211b4e` scripts: ci: check_compliance: improve the "not sorted" command `b21a455dfb` bluetooth: controller: Fix openisa checks `fdc76c48a7` workflow: compliance: Add rename limit `14ecafc67d` dts: bindings: vendor-prefixes: Sort entries `dbc366c3c7` soc: nxp: lpc: Move wrong configurations `8e02c08f96` maintainers: Fix invalid paths `b1b85e2495` boards: up: Fix spaces `58cc4013b3` maintainers: Fix xen path `66ce5c0b09` boards/soc: Add missing copyright headers `bb47243254` boards: qemu: x86: Remove pointless file `2e816a8a3a` samples: tests: update esp32-based board naming `9aeab17139` samples: tests: remove platform_exclude of esp32 boards `a4fe97b9de` boards: shields: m5stack_core2_ext: update board name `615fcab94a` samples: ipm_esp32: fix board labels and skip testing `7752f69b7f` boards: legacy: remove index entry for xtensa/riscv boards. `3eba827956` MAINTAINERS: update Espressif entries `914362bbd5` boards: xtensa: yd_esp32: Convert to v2 `a62278fd23` boards: xtensa: xiao_esp32s3: Convert to v2 `b6a11ccec4` boards: xtensa: olimex_esp32_evb: Convert to v2 `c1067c16d2` boards: xtensa: odroid_go: Convert to v2 `b8340b0109` boards: xtensa: m5stickc_plus: Convert to v2 `9d81e417be` boards: xtensa: m5stack_stamps3: Convert to v2 `c296672720` boards: xtensa: m5stack_core2: Convert to v2 `fada12aa9d` boards: xtensa: m5stack_atoms3_lite: Convert to v2 `fe37ebac1e` boards: xtensa: m5stack_atoms3: Convert to v2 `d32828fe6a` boards: xtensa: kincony_kc868_a32: Convert to v2 `5afba7855b` boards: xtensa: heltec_wireless_stick_lite_v3: Convert to v2 `ca48c17723` boards: xtensa: heltec_wifi_lora32_v2: Convert to v2 `db1fd4d229` boards: xtensa: esp32s3_luatos_core: Convert to v2 `a78b2552eb` boards: xtensa: esp32s3_devkitm: Convert to v2 `cc96061d96` boards: xtensa: esp32s2_saola: Convert to v2 `ed854e05d1` boards: xtensa: esp32s2_lolin_mini: Convert to v2 `4fa1ae8110` boards: xtensa: esp32s2_franzininho: Convert to v2 `5543040a18` boards: xtensa: esp_wrover_kit: Convert to v2 `2335ae79b3` boards: xtensa: esp32_ethernet_kit: Convert to v2 `f910b7ad4f` boards: xtensa: esp32_devkitc_wrover: Convert to v2 `32104db555` boards: xtensa: esp32_devkitc_wroom: Convert to v2 `e23a41200d` boards: riscv: icev_wireless: Convert to v2 `3c670e4e53` boards: riscv: xiao_esp32c3: Convert to v2 `fc7c6a060b` boards: riscv: stamp_c3: Convert to v2 `22c2edb89c` boards: riscv: esp32c3_luatos_core: Convert to v2 `0a96dcb778` boards: riscv: esp32c3_devkitm: Convert to v2 `be1ee1c446` vendors: update vendors lists `5e6c62137f` soc: espressif_esp32: Port to HWMv2 `037a3b52a4` boards: Raspberry Pi pico pwm led adjustment `7277cae6fa` samples: blinky_pwm: enable pwm_leds in rpi_pico overlay `da3e49d34e` boards: nxp: update selection of FLASH_MCUX_FLEXSPI_XIP_MEM_TARGET `bc8424dd3b` soc: nxp: imxrt: move FLASH_MCUX_FLEXSPI_XIP_MEM_TARGET to SOC level `041cb52939` soc: brcm: bcm_vk: Rename to bcnvk `576b43a95c` soc: Fix SOC_FAMILY name mismatches `e8f3e6494d` hwmv2: boards: intel: adsp: Fix runner after paths renamed `550399e927` boards: weact: stm32g431_core: Add wrongly deleted file back `08708c909e` tests: drivers: flash: Renamed missed board rename `06dac41e68` hwmv2: Convert Seagate Faze board to hwmv2 `dd8f842b40` hwmv2: nxp: update MAINTAINER paths for hwmv2 `b4d1c04978` hwmv2: lpc: updated overlay and conf files in samples and tests `067c69089e` boards: nxp: convert lpcxpresso55s69 to hwmv2 `097205b40a` hwmv2: Global fix of lpc54114_m4 overlay and conf files `d8cfa6fb29` boards: nxp: convert lpcxpresso54114 to hwmv2 `c29ed228c6` boards: nxp: convert lpcxpresso55s36 to hwmv2 `88cfd3d6ac` boards: nxp: convert lpcxpresso55s28 to hwmv2 `ad30c940ee` boards: nxp: convert lpcxpresso55s16 to hwmv2 `9e5a10ec80` boards: nxp: convert lpcxpresso55s06 to hwmv2 `5650c83268` boards: nxp: convert lpcxpresso51u68 to hwmv2 `82cf44be45` boards: nxp: convert lpcxpresso11u68 to hwmv2 `1a9c405a6f` soc: nxp: convert LPC SOC family to hardware model V2 `f2b536d253` boards: intel: doc: hwmv2: Fix some renamed paths `5ee6058710` samples/tests: Use board revisions `b76687602f` boards: Add yaml files for boards missing revisions `32ae4918d0` boards: nordic: Fix board names `cc1dabca65` MAINTAINERS: Update for renamed folders `a37ddce659` soc: xilinx: Rename to xlnx `a1393a07f6` soc: xenvm: Rename to xen `813ed00f67` soc: raspberry_pi: Rename to raspberrypi `71317d6798` soc: cadence: Rename to cdns `8cb0c51ec6` soc: broadcom: Rename to brcm `2b9db15c69` soc: andes: Rename to andestech `0101216ce1` soc: altera: Rename to altr `4b4c3ca65d` boards: wurth_elektronik: Rename to we `cdc3ef499f` boards: ublox: Rename to u-blox `cabdd4ad05` boards: space_cubics: Rename to sc `4b5bd7ae8a` boards: seeed_studio: Rename to seeed `a992785ceb` boards: raspberry_pi: Rename to raspberrypi `3c1cdc20fe` boards: laird_connect: Rename to lairdconnect `291c7cde2b` boards: cadence: Rename to cdns `95db897526` boards: broadcom: Rename to brcm `0a47b94879` boards: beagleboard: Change to beagle `9f9f221c24` boards: andes: Rename to andestech `e7869ca38a` boards: altera: Rename to altr `bf2fb5eca3` various: Change SOC_FAMILY_NRF to SOC_FAMILY_NORDIC_NRF `e25730ba56` modules: tf-m: Rename from nordic_nrf to nordic `9e3466606a` boards: nordic_nrf: Rename to nordic `09a398dcc8` soc: nordic_nrf: Rename to nordic `cb8ffc74f8` boards: renode: Add documentation index `2291ff4b55` boards: arm: riscv32_virtual: Convert to v2 `484b7f1996` soc: riscv_renode_virtual: Port to HWMv2 `cc5c2fb0c7` soc: raspberry_pi: Fix SOC_SERIES and SOC mismatch `59cb580513` soc: arm: designstart: Fix SOC_SERIES and SOC mismatch `aa9e0de7af` samples: Fix invalid links `a1480cf1cf` maintainers: Fix paths `0d719e004b` boards: Update documentation links `eb5c3e6f79` boards: wurth_elektronik: Drop duplicate prefix `a34a3640b7` boards: waveshare: Drop duplicate prefix `cf50e950e7` boards: weact: Drop duplicate prefix `737cfb548f` boards: sparkfun: Drop duplicate prefix `505494c97a` boards: segger: Drop duplicate prefix `4eaf69f37a` boards: ruuvi: Drop duplicate prefix `a1335caeae` boards: ronoth: Drop duplicate prefix `a9f7f30bf6` boards: raytac: Drop duplicate prefix `80db4c81b3` boards: qemu: Drop duplicate prefix `433d7e9976` boards: particle: Drop duplicate prefix `4ea79d19e7` boards: olimex: Drop duplicate prefix `fd4ae6f6a8` boards: mikroe: Drop duplicate prefix `36080549bd` boards: khados: Drop duplicate prefix `169bf8ae1d` boards: intel: Drop duplicate prefix `25f04d5222` boards: holyiot: Drop duplicate prefix `11c2af0de8` boards: google: Drop duplicate prefix `d5128f4016` boards: ebyte: Drop duplicate prefix `44fbc68cad` boards: dragino: Drop duplicate prefix `f7fe431b44` boards: contextual_electronics: Drop duplicate prefix `9094fea63b` boards: circuit_dojo: Drop duplicate prefix `b632acc1fc` boards: blue_clover: Drop duplicate prefix `1a3316ebdc` boards: bbc: Drop duplicate prefix `71c0344f8c` boards: arduino: Drop duplicate prefix `f0176fc25f` boards: altera: Drop duplicate prefix `36b920ed0f` boards: adi: Drop duplicate prefix `22520368d9` boards: adafruit: Drop duplicate prefix `296acfb2bc` boards: actinius: Drop duplicate prefix `55063380b7` boards: 96boards: Drop duplicate prefix `1f93394b55` boards: nxp: convert mimxrt595_evk to hardware model v2 `e7a4fd2ec1` soc: nxp: rt5xx: convert RT5xx SOC to HWMv2 `01942f1d11` twister: normalize platform name when storing files/data `477c8b84dd` twister: tests: test with slashes in platform names `64e3e816c4` soc: Add include guards `3a7aa2fa49` gitignore: update the compliance file list `84e1c17ad9` scripts: ci: check_compliance: add a check for board yml file `a90f53ad57` boards: sync up the vendor tags and vendor-list `af9aa65299` dts: vendor-prefixes: add keep-sorted markers `50f0bf05a3` dts: vendor-prefixes: sort the vendor list `a10b614aa4` dts: vendor-prefixes: ensure all prefixes are lowercase `5abe735e93` manifest: update SOF sha for NXP HWMv2 `9ab8f64ca9` modules: rename SOC_FAMILY_IMX `483ff8dd4d` modules: mcux: remove SOC_FAMILY_NXP_ADSP `f113dd5342` samples: update board name `39b31287d9` boards: nxp: Convert i.MX ADSP boards to hardware model v2 `1511e356a2` soc: nxp: Port i.MX ADSP family to hardware model v2 `c91e25ab47` soc: mec: rename all mec1501x reference to mec15xx `1c231fd939` hwmv2: boards: Convert IMXRT boards `417cff1e60` hwmv2: soc: Port IMXRT family to HWMV2 `28d4e41b1b` hwmv2: clean up arm64 soc and board empty directory `2b520f83cb` hwmv2: port NXP SoC LS1046A to V2 `bf7899c645` hwmv2: port nxp_ls1046ardb board to V2 `33f7b61866` samples/tests: Rename numaker boards `8f20ea6e93` boards: nuvoton: numaker_pfm: Split into 2 boards `7cf4ff43a1` drivers: pinctrl: imx: align with hwm v2 `c68e1fea4e` drivers: clock_control: ccm_rev2: align with hwm v2 update `3b49014a0f` hwmv2: move imx8mn EVK board to V2 `14f344eeab` hwmv2: move imx8mp EVK board to V2 `40f3f8f22d` hwmv2: move imx8mm EVK board to V2 `10bf79ea51` hwmv2: move imx8m soc for a-core to V2 `8727d5ca80` hwmv2: move imx93 EVK board to V2 `c81ef01563` hwmv2: move imx93 soc to V2 `5836c1b699` modules: mcux: introduce CONFIG_MCUX_CORE_SUFFIX `338f6f2bf1` doc: update board porting guide to match new hardware model `9639a1b5dc` soc: silabs: drop useless defconfigs `981807444e` soc: silabs: introduce SOC_GECKO_SDID `5d07e82485` soc: silabs: SOC_FAMILY_* replace SOC_GECKO_SERIES* `2fd081ac86` soc: silabs: align comments with soc tree `66d425f571` soc: silabs: split in families `5bd38f47a9` arch: arch: kconfig: Fix wrong placement of endmenu `00c6ef25be` tests/samples: Rename overlay files for renamed boards `0c639b8378` boards: Fix bools and selections `c2ef907d1d` drivers: flash: it8xxx2: Add missing Kconfigs `553de2ebc9` soc: ite: ec: it8xxx2: Fix SOC_SERIES being in wrong file `b8ec0080c2` boards: Documentation link fixes `eb7025e50f` tests: Update board names for hwmv2 `10ef3d4bd2` boards: silab: Add documentation index file `ba9fdaa1d6` boards: arm: efr32_radio: Convert to v2 `86c8d4a0ca` boards: arm: efm32pg_stk3402a: Convert to v2 `575ac5cafb` manifest: Update hal_silabs `87b2907304` boards: arm: efr32_thunderboard: Convert to v2 `14b30055ab` boards: arm: efr32mg_sltb004a: Convert to v2 `0012bfc15d` boards: arm: efr32xg24_dk2601b: Convert to v2 `f526225ead` boards: arm: efm32wg_stk3800: Convert to v2 `19e7df29df` boards: arm: efm32pg_stk3401a: Convert to v2 `0bd7d963d6` boards: arm: efm32hg_slstk3400a: Convert to v2 `795a90f9bf` boards: arm: efm32gg_stk3701a: Convert to v2 `43d5540be7` boards: arm: efm32gg_slwstk6121a: Convert to v2 `065148d856` boards: arm: efm32gg_sltb009a: Convert to v2 `1dc9a8aa17` soc: silabs_exx32: Port to HWMv2 `763571e878` tests: Expand names `dae301b8a3` boards: xen: xenvm: Expand name `19e60eef36` boards: qemu: qemu_cortex_a53: Expand names `a0a7c30f28` soc: intel: intel_adsp: Fix issues `df9a4223fe` scripts: ci: introduce soc name check in check_compliance `ed401abaff` soc: emsdsp: align SoC name defined in soc.yml to Kconfig SOC setting `fc78e5eaa4` MAINTAINERS: update RISC-V arch area paths `4e586958ff` boards: convert QEMU RISC-V 64 bit board to Zephyr HWMv2 `f4c31a2b86` boards: convert QEMU RV32E board to Zephyr HWMv2 `5b2ffc652b` boards: convert QEMU RISC-V 32 bit board to Zephyr HWMv2 `5db061a4c6` soc/riscv: convert the QEMU virt RISCV-32 SoC to HWMv2 `6547845e9d` boards: convert SparkFun RED-V Things Plus to Zephyr HWMv2 `95a1f96399` boards: convert SiFive HiFive Unmatched to Zephyr HWMv2 `e563eb0a62` soc/sifive/sifive_freedom: add SiFive Freedom FU740 SoC `8914bc58b6` boards: convert SiFive HiFive Unleashed to Zephyr HWMv2 `7e8de1e781` soc/sifive/sifive_freedom: add SiFive Freedom U540 SoC `bfcc2ed18f` boards: convert SiFive HiFive1 Rev. B to Zephyr HWMv2 `330fc38f9f` boards: convert SiFive HiFive1 to Zephyr HWMv2 `b9e06f4c38` soc/sifive/sifive_freedom: add SiFive Freedom E310 SoC `4b90b30b9d` scripts: west_commands: completion: Add hwmv2 complete to fish `0f6842e2fa` scripts: west_commands: completion: Add hwmv2 complete to zsh `b2af1e1737` scripts: west: list_boards: Fix hwmv2 output `686a4b78b8` scripts: west_commands: completion: Add hwmv2 complete to bash `396b6bb856` soc: nxp: fix typo in SoC name `765299c627` soc: broadcom: align SoC names defined in soc.yml to Kconfig SOC setting `7efd46eb41` soc: arm: align SoC names defined in soc.yml to Kconfig SOC setting `505cbc5c42` soc: mec: align SoC names defined in soc.yml to Kconfig SOC setting `951a140701` soc: ti: define SOC name in Kconfig `a795d28810` snippets: Initial HWMv2 support `f9a957e6f6` boards: nordic: nrf9160dk: Fix missing nrf52840 config `df994e7ee8` soc: xilinx: zync7000: Remove xilinx from soc series name `8dfabd56ca` soc: cypress: Add protection guard to file `447b951593` tests: kernel: tickless: Remove old board name `bad5dfa71f` boards: nordic: nrf5340dk: Fix board names `ad2e863f39` soc: atmel: Use new family prefix `3f08e714b2` soc: intel_adsp: hwmv2: Align SOC_SERIES_INTEL_ACE name and value `6734597a76` soc: intel_adsp_cavs: hwmv2: Align SOC_SERIES name and value `2908af0bcc` boards: nrf51dk/dongle: change SoC to nRF51822 `d1ceb29fca` soc: align CONFIG_SOC values to match soc.yml names `4768ccaf70` tests: drivers: gpio: gpio_api_1pin: exclude hifive1 `ebdb0879ad` boards: nxp: s32z2xxdc2: convert to hwmv2 `ae82580d08` boards: nxp: mr_canhubk3: convert to hwmv2 `c5f0defbae` boards: nxp: ucans32k1sic: convert to hwmv2 `1e46cabce6` soc: nxp: convert NXP S32 family to hwmv2 `f2f85133f2` soc: stm32: Rename series path `86642f4e78` soc: stm32: Rename Kconfig SOC_SERIES symbols `c61e807896` soc: stm32: Cleanup Kconfig.defconfig files `ca46c8abc9` tests: Fix board names `fbfed5f48f` maintainers: Update synopsys entries `8cd8b1cc47` boards: synopsys: Add documentation index `6f6cc57a04` boards: arc: hsdk4xd: Convert to v2 `c4c14a54ca` soc: snps_arc_hsdk4xd: Port to HWMv2 `06c2054e5c` boards: arc: iotdk: Convert to v2 `ff0e0fce1b` soc: snps_arc_iot: Port to HWMv2 `334264c46a` boards: arc: emsdp: Convert to v2 `8b947a0e91` soc: snps_emsdp: Port to HWMv2 `990417bbde` tests: Update board names for hwmv2 `e12719154a` boards: arc: em_starterkit: Convert to v2 `437a430fbe` soc: snps_emsk: Port to HWMv2 `f93387f968` boards: arc: hsdk: Convert to v2 `1cf2498b13` soc: snps_arc_hsdk: Port to HWMv2 `47abe81256` boards: arc: nsim: Convert to v2 `1e33786dc4` soc: snps_nsim: Port to HWMv2 `7f081914db` boards: arc: qemu_arc: Convert to v2 `bc97349dbd` soc: snps_qemu: Port to HWMv2 `a9902ff58e` boards: Use zephyr_file for file links `126e1a4e72` boards: Fix invalid documentation links `899f0257c3` boards: stm32wb: Restore missing .defconfig files `790c10b1ee` soc: x86/atom: imply mmu, do not select it `faee62088d` boards: x86: remove qemu_x86_tiny_768 `c34d186a57` x86: atom: remove soc.h with unused content `1be3a9e9d3` x86: remove legacy ia32, use atom instead `60e6b400f9` boards: qemu: move qemu_x86 -> x86 `c4fbac27e8` boards: infineon: Add documentation index `b4dd29a9c4` maintainers: Update paths for hwmv2 `380f5fdb2b` boards: cypress: Add documentation index `9de981be05` boards: arm: xmc47_relax_kit: Convert to v2 `6394e8a348` boards: arm: xmc45_relax_kit: Convert to v2 `04dbf17e19` soc: xmc_4xxx: Port to HWMv2 `c9731f1bce` boards: arm: cy8cproto_063_ble: Convert to v2 `53d41869d1` boards: arm: cy8cproto_062_4343w: Convert to v2 `46c4f01427` boards: arm: cy8ckit_062s4: Convert to v2 `d285e19cf2` boards: arm: cy8ckit_062_wifi_bt: Convert to v2 `2bebd7298c` boards: arm: cy8ckit_062_ble: Convert to v2 `af243274c2` soc: psoc6 and psoc_6: Port to HWMv2 `105a2bae84` cmake: modules: boards: Fix board deprecation for HWMv2 `dca54e000a` cmake: modules: boards: Enhance board aliases for HWMv2 `fc314e8e3f` cmake: modules: boards: Fix BOARD_ALIAS `9a7c2ce6d5` soc: gaisler: Move Kconfig file `1ac56d0501` soc: soc_legacy: mips: Remove out file `c054381a7a` boards: adjust few boards/ paths `4d93b8d9fd` boards: convert all microchip MEC boards to hwmv2 `ab2fcb1245` soc: convert microchip_mec to hwmv2 `ead4b57a7b` soc: arm64: intel_socfpga: hwmv2: Rename SoCs `d4c143d306` MAINTAINERS: intel_socfpga: Adjust to HWMv2 move `70a66ac03a` boards: arm64: intel_socfpga: Move boards to subdirectories `8a85c07799` boards: arm64: intel_socfpga_agilex5_socdk: move to HWMv2 `8c253a99fc` boards: arm64: intel_socfpga_agilex_socdk: move to HWMv2 `ab883b8019` soc: arm64: intel_socfpga: Move and convert to HWMv2 `7c8b7a153b` soc: arm: intel_socfpga_std: Rename with HWMv2 `8dc2b911f6` soc: board: intel_socfpga_std: Align names to 'Cyclone V' `402366117a` soc: arm: intel_socfpga_std: Align board subdirectory `f0a8d12745` boards: arm: cyclonev_socdk: Move to HWMv2 `2271f17a86` soc: arm: intel_socfpga_std: Move and convert to HWMv2 `841c2a9d99` boards: riscv: beaglev_fire: Convert to v2 `3b314531ab` boards: riscv: mpfs_icicle: Convert to v2 `d4ea2bf70b` boards: riscv: m2gl025_miv: Convert to v2 `5256e9fcc3` soc: microchip_miv: Port to HWMv2 `18e5cf1d51` maintainers: Update path for hwmv2 `eab8628f98` boards: arm: qemu_cortex_m3: Convert to v2 `1532f2fee1` soc: ti_lm3s6965: Port to HWMv2 `430ca6a475` maintainers: Update ambiq paths `a9b9b41b91` boards: ambiq: Add index `db0271ecbb` boards: arm: apollo4p_blue_kxr_evb: Convert to v2 `957e2b2061` boards: arm: apollo4p_evb: Convert to v2 `5a90a44454` soc: ambiq: Port to HWMv2 `a20c113fbd` boards: nxp: convert ip_k66f to hwmv2 `34e3852a54` boards: nxp: convert usb_kw24d512 to hwmv2 `20ad604de6` boards: nxp: convert twr_kv58f220m to hwmv2 `2e2a7b7656` boards: nxp: twr_ke18f: convert to hwmv2 `f7dcc2eb5e` boards: nxp: convert rddrone_fmuk66 to hwmv2 `b58e90a2e9` boards: nxp: convert hexiwear to hwmv2 `aae6e9e454` boards: nxp: frdm_kw41z: convert to hwmv2 `1d3baac2d6` boards: nxp: convert frdm_kl25z to hwmv2 `3b1d21483f` boards: nxp: frdm_k82f: port to hwmv2 `6046e6ded9` boards: nxp: port frdm_k64f to hwmv2 `0a7bf9fd79` boards: nxp: port frdm_k22f to hwmv2 `dce697c823` boards: nxp: add toctree placeholder `666a353409` soc: nxp: kinetis: convert kinetis SOC family to hardware model V2 `89f0a6034b` maintainers: Update paths for renesas boards/socs `004bd43c48` tests/samples/snippets: Update board names for hwmv2 `a6d756923d` boards: arm and arm64: rcar_h3ulcb: Convert to v2 `3801216b8d` boards: arm64: rcar_salvator_xs_m3: Convert to v2 `b7cc30aaea` boards: arm: rcar_h3_salvatorx_cr7: Convert to v2 `866427ea29` boards: arm: arduino_uno_r4: Convert to v2 `2689b3f0ee` soc: ra: Port to HWMv2 `e7ebc727c8` boards: arm: da1469x_dk_pro: Convert to v2 `903265b2bb` boards: arm: da14695_dk_usb: Convert to v2 `529a78ed51` soc: smartbond: Port to HWMv2 `97cf636ae0` boards: arm: rcar_spider_cr52: Convert to v2 `6d0c53f3a1` soc: rcar: Port to HWMv2 `44e0aa0668` soc: renesas: rzt2m: Move folder structure for more SoCs `85238fc205` boards: misc: Fixed STM32 based boards doc links `dffc08af56` boards: riscv: niosv_m: move and convert to HWMv2 `545093abe4` boards: riscv: niosv_g: move and convert to HWMv2 `ecfa192f1b` soc: riscv: intel_niosv: move and convert to HWMv2 `fd1e8cdc30` hwmv2: sof: intel_adsp: submanifest provisional link `8bf067e625` doc: boards: intel_adsp: Re-order pages `4833275ccd` MAINTAINERS: intel_adsp: Adjust to HWMv2 move `b9a70e5ea2` soc: intel_adsp: tools: pylint compliance workaround `18c70cc4bf` hwmv2: tests: boards: intel_adsp: Adjust board names `ca52baf9de` hwmv2: boards: intel_adsp: Overhaul board configurations `d1b3bcce64` soc: boards: xtensa: intel_adsp_ace: Rename with HWMv2 `f362a8ae2c` doc: soc: boards: intel_adsp_cavs25: Rename with HWMv2 `51dee5da92` tests: samples: boards: intel_adsp_cavs25: Rename with HWMv2 `e66c35e0d0` boards: xtensa: intel_adsp_cavs25: Rename board with HWMv2 `d1491a4810` soc: boards: xtensa: intel_adsp_cavs25: Rename with HWMv2 `fa0fca79c4` scripts: west: runners: intel_adsp: Adjust path to HWMv2 `acd18bfaf7` boards: xtensa: intel_adsp_ace20_lnl: move and convert to HWMv2 `546c94b958` boards: xtensa: intel_adsp_ace15_mtpm: move and convert to HWMv2 `8aab718c3e` boards: xtensa: intel_adsp_cavs25_tgph: change to board variant `30f17424a4` boards: xtensa: intel_adsp_cavs25: move and convert to HWMv2 `35a97cb524` soc: xtensa: intel_adsp: HWMv2 workaround for SOF config `fdc20fdff6` soc: xtensa: intel_adsp: move and convert to HWMv2 `22dc2b6391` cmake: improved board handling for revisions `2f1e33a2e6` cmake: improve arch error message for invalid arch selection `c47c37d3db` sample: basic: blinky_pwm: Exclude rpi_pico w variant `7a788b9a18` boards: raspberry_pi: rpi_pico: Use full name for w variant `7046b92d41` tests: atmel_sam: adc: Fix sam4e_xpro adc build `253ee9638c` tests: atmel_sam0: Update platform name `ccb4c63324` samples: atmel_sam0: Update platform name `2d4acf9230` boards: arduino_nano_33_iot: Convert to HWMv2 `a60d28969a` boards: arduino_mkrzero: Convert to HWMv2 `0409e51d3f` boards: arduino_zero: Convert to HWMv2 `1b2528df1b` boards: wio_terminal: Convert to HWMv2 `af1096e7ca` boards: ev11l78a: Convert to HWMv2 `0b1db9c53d` boards: adafruit_trinket_m0: Convert to HWMv2 `e9874671e2` boards: adafruit_itsybitsy_m4_express: Convert to HWMv2 `ba6c014071` boards: adafruit_grand_central_m4_express: Convert to HWMv2 `33ad4a51ca` boards: adafruit_feather_m0_lora: Convert to HWMv2 `9812f3d54e` boards: adafruit_feather_m0_basic_proto: Convert to HWMv2 `c76b1fbeca` boards: serpente: Convert to HWMv2 `649789e433` boards: seeeduino_xiao: Convert to HWMv2 `6b3bdb7364` boards: same54_xpro: Convert to HWMv2 `93dda5ee4b` boards: samr34_xpro: Convert to HWMv2 `e48e1f5d5b` boards: samc21n_xpro: Convert to HWMv2 `f11cf73df1` boards: saml21_xpro: Convert to HWMv2 `ac73ed6dcd` boards: samd20_xpro: Convert to HWMv2 `0fdbe3552e` boards: samd21_xpro: Convert to HWMv2 `854cff3905` boards: samr21_xpro: Convert to HWMv2 `a87ea5bc0a` soc: atmel: sam0: Port to HWMv2 `706e5d27cd` boards: riscv: neorv32: Convert to v2 `d1edcdd088` soc: neorv32: Port to HWMv2 `0f7add89ca` boards: native_sim/posix: Add 64bit versions as variants `b6edad8d68` soc: soc_legacy: remove the arm/st_stm32 folder `c58e0822a6` boards: Convert nucleo_f207zg to HWM v2 `b987093a80` soc: v2: stm32: Migrate STM32F2 series `2096fd4652` samples: bluetooth: hci_uart: Fix wrongly converted board names `830f9c5a82` MAINTAINERS: Update Atmel entries `527cd9d8cd` CODEOWNERS: Update Atmel entries `83af7d0c1c` samples: atmel_sam: Update platform name `fd9b84d457` tests: atmel_sam: Update platform name `3c72fe863c` boards: arduino_due: Convert to HWMv2 `37dfacbf9e` boards: RoboKit1: Convert to HWMv2 `1108d7b0ed` boards: sam_v71_xult: Convert to HWMv2 `bed44a5c28` boards: sam_e70_xplained: Convert to HWMv2 `40448c5a9f` boards: sam4s_xplained: Convert to HWMv2 `31273692c0` boards: sam4l_ek: Convert to HWMv2 `35b5d33ef0` boards: sam4e_xpro: Convert to HWMv2 `3b84b9910a` soc: atmel: Port SAM family to HWMv2 `da00d0e7b9` boards: Convert nucleo_wba55cg to HWM v2 `fb2103f89e` boards: Convert nucleo_wba52cg to HWM v2 `1f9a533fbc` soc: st: stm32: Migrate STM32WBA series `3f92f65b28` boards: fix documentation for alientek and blues boards `7646b74aaf` boards: stm32l4: doc: add zephyr_file to defconfig path `fea54ddcd9` boards: Convert adi_eval_adin2111ebz to HWM v2 `d47f1878b1` boards: Convert adi_eval_adin1110ebz to HWM v2 `ae42be236b` boards: Convert swan_r5 to HWM v2 `83bd1a9ecc` boards: Convert stm32l4r9i_disco to HWM v2 `39c26f09ed` boards: Convert stm32l496g_disco to HWM v2 `29d03c970b` boards: Convert stm32l476g_disco to HWM v2 `74acec315c` boards: Convert sensortile_box to HWM v2 `fee6d8676e` boards: Convert pandora_stm32l475 to HWM v2 `008b5d9392` boards: Convert nucleo_l4r5zi to HWM v2 `24e357d623` boards: Convert nucleo_l4a6zg to HWM v2 `2c5f9dcce0` boards: Convert nucleo_l496zg to HWM v2 `4da061646f` boards: Convert nucleo_l476rg to HWM v2 `15956a69b8` tests: drivers: flash: stm32: update platform name `80324f7707` boards: Convert nucleo_l452re_p to HWM v2 `9893e0d111` boards: Convert nucleo_l452re to HWM v2 `46f92b227b` boards: Convert nucleo_l433rc_p to HWM v2 `ed5d1bb4cd` boards: Convert nucleo_l432kc to HWM v2 `325f95ec20` boards: Convert nucleo_l412rb_p to HWM v2 `d055676307` boards: Convert disco_l475_iot1 to HWM v2 `c7a415d92c` boards: Convert b_l4s5i_iot01a to HWM v2 `d15144f582` soc: st: stm32: Migrate STM32L4 series `a63ff71bcb` boards: nrf_bsim: Add new nrf5340 board definitions `b53c6f412c` boards: nrf_bsim: Remove redundant option setting `83eb4fc069` MAINTAINERS: intel_ish: Adjust to HWMv2 move `715685b19f` boards: x86: intel_ish: move and convert intel_ish boards to HWMv2 `5b9ef94106` soc: x86: intel_ish: move and convert to HWMv2 `12b297707a` boards: Convert stm32wb5mmg to HWM v2 `cdcea932bc` boards: Convert stm32wb5mm_dk to HWM v2 `0a3ae2b223` boards: Convert nucleo_wb55rg to HWM v2 `20b4ce17d5` soc: st: stm32: Migrate STM32WB series `47c65400d6` soc: st: stm32: fix stm32l0 family `59ec56f9e6` boards: Convert stm32h573i_dk to HWM v2 `dc5977dbba` boards: Convert nucleo_h563zi to HWM v2 `a6e4928543` soc: st: stm32: Migrate STM32H5 series `99f248e048` soc: stm32u5: Fix references after conversion to hw modelv2 `15f16834e6` boards: Convert stm32u5a9j_dk to HWM v2 `c1ee449ef1` boards: Convert sensortile_box_pro to HWM v2 `db4deddf9d` boards: Convert nucleo_u5a5zj_q to HWM v2 `2fd3ed43d2` boards: Convert nucleo_u575zi_q to HWM v2 `902fceb173` boards: Convert b_u585i_iot02a to HWM v2 `d716ca1a10` soc: st: Migrate stm32u5 series to new hw model `b7abc89428` hwmv2: boards: x86: doc: Adjust common docs to new locations `69b334f54b` MAINTAINERS: Change paths to native and nrfbsim boards `614611a528` boards: nrf_bsim: Convert to HW model v2 `5821b9ec2e` board: native_sim/posix: Convert to hwmv2 `04cbad174e` soc: native: Convert to HWMv2 `24ca0febfc` boards: nrf_bsim: Fix path to pinctrl_soc.h `9a32559a2d` cmake: FindHostTools: Fix for hwmv2 for host based targets `c4b11e0251` boards: longan_nano: port to HWMv2 `97edd05be3` boards: gd32vf103c_starter: port to HWMv2 `9cf624c410` boards: gd32vf103v_eval: port to HWMv2 `b40bf25e5e` soc: gd_gd32: reorganize folders `71600d7e95` soc: gd_gd32: move pinctrl_soc.h content back to soc folder `2bd84a1bc5` soc: gd_gd32: port gd32vf103 series to HWMv2 `9dc342143b` boards: doc: fix a bunch of broken reference `10392d693d` doc: boards: split out shields `b2def8ed3a` boards: acrn: fix title `bf7d3efe78` boards: riscv: tlsr9518adk80d: Convert to v2 `c579770e1d` soc: telink_tlsr: Port to HWMv2 `9131540109` soc: stm32h7: Couple of tests fixes following migration `2efcefc089` boards: Convert stm32h7b3i_dk to HWM v2 `d9b295a85b` boards: Convert stm32h750b_dk to HWM v2 `a2f56bdcd5` boards: Convert stm32h747i_disco to HWM v2 `00314155df` boards: Convert stm32h735g_disco to HWM v2 `b08819dff7` boards: Convert nucleo_h7a3zi_q to HWM v2 `56456c16e5` boards: Convert nucleo_h753zi to HWM v2 `91f9198dc4` boards: Convert nucleo_h745zi_q to HWM v2 `96f1bafbf9` boards: Convert nucleo_h743zi to HWM v2 `b290f25baa` boards: Convert nucleo_h723zg to HWM v2 `9fbe6bf191` boards: Convert fk7b0m1_vbt6 to HWM v2 `44bcfe57c7` boards: Convert arduino_portenta_h7 to HWM v2 `4c86af7eae` boards: Convert arduino_opta_m4 to HWM v2 `b4f852f738` boards: Convert arduino_giga_r1 to HWM v2 `bac9789264` soc: st: Migrate stm32h7 series to new hw model `a954e1722d` boards: stm32l0: Cleanup board _defconfig files after migration `7e8515b241` boards: Convert ronoth_lodev to HWM v2 `25246c21ef` boards: Convert nucleo_l073rz to HWM v2 `09396eb2e6` boards: Convert nucleo_l053r8 to HWM v2 `70c004fd83` boards: Convert nucleo_l031k6 to HWM v2 `e3daa98e79` boards: Convert nucleo_l011k4 to HWM v2 `a2de60c6da` boards: Convert dragino_nbsn95 to HWM v2 `e877ce9cec` boards: Convert dragino_lsn50 to HWM v2 `2b50218c23` boards: Convert b_l072z_lrwan1 to HWM v2 `4a65f55916` soc: st: Migrate stm32l0 series to new hw model `cc6e6be01f` boards: fix few leftover ITE board references `a837303268` soc: stm32: Protect Kconfig symbols by SOC_FAMILY_STM32 `88e5959f17` hwm2: Fix unit_testing: it is also a legacy board by now `95e06e8663` cmake: Fix uses of old SOC path `d517d3cc24` soc: set linker script for ra4m1 `68f9aeddab` soc: ite: add SOC_SERIES_ITE_IT8XXX2 guards around ITE options `ccf4f48f01` boards: convert ite boards to hwmv2 `4a6e286a3b` soc: convert ite_ec to hwmv2 `12e375f826` doc: handle arch / soc / board docs in new hardware model `b4db917de9` boards: Add documentation index files `d6e0d27efe` samples: bluetooth: hci_uart: Fix wrong named files `bc16a7a727` tests: Update board names for hwmv2 `2834883843` boards: riscv: rv32m1_vega: Convert to v2 `9c68231ba9` soc: openisa_rv32m1: Port to HWMv2 `986e9619fd` soc: starfive_jh71xx: Port to HWMv2 `e82932e787` boards: riscv: litex_vexriscv: Convert to v2 `cb9339f88f` soc: litex_vexriscv: Port to HWMv2 `1cd4c34654` boards: riscv: opentitan_earlgrey: Convert to v2 `92eadf06b8` soc: opentitan: Port to HWMv2 `a8659e170b` boards: riscv: titanium_ti60_f225: Convert to v2 `359133d725` soc: efinix_sapphire: Port to HWMv2 `6d466429ed` soc: soc_legacy: riscv: litex_vexriscv: Add updated paths `a1ff441eb3` boards: riscv: adp_xc7k_ae350: Convert to v2 `ef82a8255c` soc: ae350: Port to HWMv2 `282204758a` samples: boards: stm32: ccm: fix include path `8ca9341195` samples: basic: threads: fix broken reference `8a947f446d` boards: nrf52840dk: fix rst syntax `324cb41153` boards: nordic_nrf: fix broken references `963c74df1c` boards: intel_(ish\|adl\|ehl\|rpl), up_squared: fix include paths `8d518ce504` boards: legacy: drop empty folders `0fef0cef5b` boards: mps2: fix table formatting `e52ccc244f` boards: add HWMv2 board index `c7426eca5e` boards: arm: add legacy tag `1eba9d8a8f` boards: acrn: create vendor folder `8d92edc727` tests: kernel: Adjust qemu_x86_tiny_768 configuration HWMv2 `75117d1b2d` scripts: ensure posix path is used with --cmakeformat `0b0384b56a` maintainers: update paths after HWMv2 changes `c1b77b223d` boards: arm: pan1783: Convert to v2 `91a077b2ab` boards: posix: nrf_bsim: Update paths `413b6c2a40` cmake: modules: configuration_files: Add board identifier overlay file `4f572ba24f` treewide: Update board names for hwmv2 `cb348c7edf` boards: arm: nrf54l15pdk_nrf54l15: Convert to v2 `811ad90566` boards: arm: nrf54h20pdk_nrf54h20: Convert to v2 `d44ef90cf8` soc: nordic_nrf: Migrate nRF54H/nRF54L to v2 and fix nrf `c860f205de` boards: arm: nrf9151dk_nrf9151: Convert to v2 `fba98a1763` soc: nordic_nrf: Migrate nRF9151 to v2 `5c156a2d35` boards: arm: 96b_carbon_nrf51: Convert to v2 `cfc47a3a4b` boards: arm: nrf9161dk_nrf9161: Convert to v2 `37129b4e44` boards: arm: nrf9131ek_nrf9131: Convert to v2 `a923beba5d` boards: arm: bl5340_dvk: Convert to v2 `d242b2703b` boards: arm: raytac_mdbt53v_db_40_nrf5340: Convert to v2 `9c80d4e644` boards: arm: raytac_mdbt53_db_40: Convert to v2 `28268c4938` boards: arm: nrf5340_audio_dk_nrf5340: Convert to v2 `33ad2b5bc6` boards: arm: thingy53_nrf5340: Convert to v2 `40daa94f2d` boards: arm: nrf9160_innblue22: Convert to v2 `2b0dbb9d51` boards: arm: nrf9160_innblue21: Convert to v2 `ee6f7697ac` boards: arm: sparkfun_thing_plus_nrf9160: Convert to v2 `594e4bad6b` boards: arm: circuitdojo_feather_nrf9160: Convert to v2 `a5803ba099` boards: arm: actinius_icarus: Convert to v2 `db8c275456` boards: arm: actinius_icarus_bee: Convert to v2 `30177cf53d` boards: arm: actinius_icarus_som: Convert to v2 `486504cf24` boards: arm: actinius_icarus_som_dk: Convert to v2 `dd0672a64c` boards: arm: nrf9160dk_: Convert to v2 `c1565b3d14` boards: arm: xiao_ble: Convert to v2 `6dd2723314` boards: arm: qemu_cortex_m0: Convert to v2 `ee1ce24a42` boards: arm: bbc_microbit: Convert to v2 `1952d559f2` boards: arm: rm1xx_dvk: Convert to v2 `9e12c3d8bd` boards: arm: nrf51dongle_nrf51422: Convert to v2 `0ffbc1da33` boards: arm: nrf51_blenano: Convert to v2 `be52dfb7b6` boards: arm: nrf51_vbluno51: Convert to v2 `4c29d1827f` boards: arm: nrf51_ble400: Convert to v2 `5b4a9556fd` boards: arm: raytac_mdbt53_db_40_nrf5340: Fix typo `69e5d87a15` boards: arm: contextualelectronics_abc: Convert to v2 `5e4ace1bbe` boards: arm: degu_evk: Convert to v2 `2762460a64` boards: arm: pan1781_evb: Convert to v2 `fdc3913e76` boards: arm: ubx_evkninab1_nrf52832: Convert to v2 `9c9c3a09a1` boards: arm: holyiot_yj16019: Convert to v2 `109edc296f` boards: arm: blueclover_plt_demo_v2_nrf52832: Convert to v2 `7bfcdbbe8f` boards: arm: decawave_dwm1001_dev: Convert to v2 `0fbb543983` boards: arm: acn52832: Convert to v2 `073e0f8080` boards: arm: we_proteus2ev_nrf52832: Convert to v2 `197a19f396` boards: arm: ebyte_e73_tbb_nrf52832: Convert to v2 `1616fc8ae5` boards: arm: nrf52_vbluno52: Convert to v2 `5622077738` boards: arm: nrf52_sparkfun: Convert to v2 `a6289516e4` boards: arm: 96b_nitrogen: Convert to v2 `439d836883` boards: arm: nrf52_blenano2: Convert to v2 `16e65f09c4` boards: arm: arduino_nicla_sense_me: Convert to v2 `862efd5a21` boards: arm: thingy52_nrf52832: Convert to v2 `dede0f6cd3` boards: arm: nrf52_adafruit_feather: Convert to v2 `91e864ea29` boards: arm: nrf52832_mdk: Convert to v2 `47ec3e416b` boards: arm: ruuvi_ruuvitag: Convert to v2 `52f797a227` boards: arm: pinetime_devkit0: Convert to v2 `433db339f9` boards: arm: ubx_evkannab1_nrf52832: Convert to v2 `a646d3f2d5` boards: arm: ubx_bmd300eval_nrf52832: Convert to v2 `d0d434bf86` cmake: print identifier instead of variant `c3f5ed8157` boards: arm: we_proteus3ev_nrf52840: Convert to v2 `eecff8ee7a` boards: arm: nrf52840_mdk_usb_dongle: Convert to v2 `34507614f6` boards: arm: nrf52840_mdk: Convert to v2 `f02b56cb96` boards: arm: nrf52840_blip: Convert to v2 `600c55c92a` boards: arm: nrf52840_papyr: Convert to v2 `f294bfc5e4` boards: arm: reel_board: Convert to v2 `882524d2a0` boards: arm: nrf21540dk_nrf52840: Convert to v2 `4bce0e9b39` boards: arm: nrf52840dongle_nrf52840: Convert to v2 `d0229c771f` boards: arm: particle_argon: Convert to v2 `23a0570e64` boards: arm: particle_boron: Convert to v2 `b6d3e1764f` boards: arm: particle_xenon: Convert to v2 `499f3e7902` boards: arm: rak5010_nrf52840: Convert to v2 `9ae6b1804d` boards: arm: rak4631_nrf52840: Convert to v2 `fe2c90da5c` boards: arm: pinnacle_100_dvk: Convert to v2 `3d4d46698c` boards: arm: ubx_evkninab3_nrf52840: Convert to v2 `b1afbf0158` boards: arm: ubx_bmd380eval_nrf52840: Convert to v2 `9f9897c872` boards: arm: ubx_bmd345eval_nrf52840: Convert to v2 `f7fb2030c7` boards: arm: ubx_bmd340eval_nrf52840: Convert to v2 `7186432662` boards: arm: raytac_mdbt50q_db_40_nrf52840: Convert to v2 `32c4bdc0c4` boards: arm: pan1780_evb: Convert to v2 `7b64c638a8` boards: arm: pan1770_evb: Convert to v2 `156ee8ad8a` boards: arm: mg100: Convert to v2 `3d33dadeb0` boards: arm: arduino_nano_33_ble: Convert to v2 `4fee7371d2` boards: arm: adafruit_itsybitsy_nrf52840: Convert to v2 `ad37a0c222` boards: arm: adafruit_feather_nrf52840: Convert to v2 `cf85b7169f` boards: arm: bt510: Convert to v2 `44b67ac430` boards: arm: bt610: Convert to v2 `7dbb65d371` boards: arm: ubx_evkninab4_nrf52833: Convert to v2 `5e79cb957d` boards: arm: raytac_mdbt50q_db_33_nrf52833: Convert to v2 `12bd83a218` boards: arm: pan1782_evb: Convert to v2 `1a135ec352` boards: arm: bbc_microbit_v2: Convert to v2 `4dbe97e5ea` boards: arm: nrf52833dk: Convert to v2 `d632b90043` boards: arm: ubx_bmd360eval_nrf52811: Convert to v2 `cc1a30f24b` boards: arm: we_ophelia1ev_nrf52805: Convert to v2 `df0df9000b` boards: arm: ubx_bmd330eval_nrf52810: Convert to v2 `d2c7972a9a` boards: arm: nrf52dk: Convert to v2 `202c2bf447` boards: arm: bl654_sensor_board: Convert to v2 `c3e36f2042` boards: arm: bl654_usb: Convert to v2 `b9dd58aea1` boards: arm: bl654_dvk: Convert to v2 `0e1898b093` boards: arm: bl653_dvk: Convert to v2 `286f4a7524` boards: arm: bl652_dvk: Convert to v2 `d1709cdb37` boards: update nRF51dk board to board scheme v2. `8f040cff2c` boards: Update nrf5340dk_nrf5340 to HWMv2 scheme `8c90fae8e0` boards: update nRF52840dk_nrf52840/nrf52811 board to board scheme v2. `c828dcc60e` boards: common: openocd-nrf5: Add HWMv2 support `c79f1b0d94` kconfig: soc: adopt Nordic SoC series to support hw model v2 scheme `3584b30fc1` tests: Update board names for hwmv2 `94024d940e` boards: arm: arty_a7: Convert to v2 `8053c3a8df` boards: arm: scobc_module1: Convert to v2 `d5473b76fe` soc: designstart: Port to HWMv2 `f5792b05e7` boards: arm: fvp_baser_aemv8r_aarch32: Convert to v2 `ff202daa8e` soc: fvp_aemv8r_aarch32: Port to HWMv2 `e66cbc2945` boards: arm: v2m_musca_s1: Convert to v2 `33b47b2edb` boards: arm: v2m_musca_b1: Convert to v2 `baeebd31d2` soc: musca: Port to HWMv2 `73b257a3f9` boards: arm: v2m_beetle: Convert to v2 `85de0888ec` soc: beetle: Port to HWMv2 `867960a891` manifest: Update modules `6ca677ed3a` boards: arm: mps2: Convert to v2 `bcf4ad19d4` twister: build_dir: convert / to _ to support hwmv2 `0ac386683f` soc: Kconfig.v2: Add SOC_PART_NUMBER `9242c3c78f` soc: stm32: soc.yml: reorder series `248d17f160` boards: stm32: cleanup `0a67265e99` boards: stm32: fix for boards with revisions `f8d44317ee` soc: stm32l5: Rename overlays for nucleo_l552ze_q ns target. `400343d17e` soc: stm32: Set default on USE_DT_CODE_PARTITION `d783ef549a` soc: stm32l5: Update stm32l5 non secure targets in various places `643aeac552` boards: Convert stm32l562e_dk to HWM v2 `e601d64344` boards: Convert nucleo_l552ze_q to HWM v2 `2f7a387b32` soc: st: Migrate stm32l5 series to new hw model `519752efcd` boards: xenvm: doc: Remove reference to deleted file `06263dd717` boards: xenvm: Unset HEAP_MEM_POOL_SIZE in gicv3 variant `66b0df5526` boards: qemu_cortex_a53: Fix Kconfig warnings in SMP variant `fa07bd9419` boards: mps3: Fix non-secure variant `8f6f0726dd` boards: Move xenvm under xen `7b155a7031` boards: Raspberry Pi vendor fix `804697afa5` boards: Move 96b_aerocore to 96boards `d2f001e320` boards: x86: acrn: move and convert to HWMv2 `ec7f7b3c30` tests: kernel: qemu_x86: adjust to the HWMv2 `89dfcddc7e` boards: x86: qemu_x86_tiny@768: change to board variant `eb724eb6a7` boards: x86: qemu_x86: optimize default HWMv2 configurations `6f1043cde6` boards: x86: qemu_x86: move and convert to HWMv2 `cab924cbfb` soc: x86: ia32: move and convert to HWMv2 `237fdff918` soc: x86: lakemont: move and convert to HWMv2 `03042b7704` boards: move 96b_carbon to 96boards folder `767b94414e` boards: rename vendor seeed to seeed_studio `07fa3a3d79` boards: Convert olimex_lora_stm32wl_devkit to HWM v2 `ba01d3beca` boards: Convert nucleo_wl55jc to HWM v2 `7ce84f4041` boards: Convert lora_e5_mini to HWM v2 `b988bae576` boards: Convert lora_e5_dev_board to HWM v2 `6fbf39c726` soc: v2: stm32: Migrate STM32WL series `4a41878442` soc: st: stm32g4: add missing include `1e79ba15f6` boards: Convert weact_stm32g431_core to HWM v2 `ffdcb60185` boards: Convert nucleo_g474re to HWM v2 `d6acb08d3e` boards: Convert nucleo_g431rb to HWM v2 `90e592ffd1` boards: Convert b_g474e_dpow1 to HWM v2 `eb8a7e3441` soc: st: stm32: Migrate STM32G4 series `ada469f237` tests: Update board names for hwmv2 `0342433187` boards: arm: npcx9m6f_evb: Convert to v2 `c10248d964` boards: arm: npcx7m6fb_evb: Convert to v2 `21ddc5e6a6` boards: arm: npcx4m8f_evb: Convert to v2 `5500f3ef21` soc: npcx: Port to HWMv2 `e7baf09ede` soc: m48x: Port to HWMv2 `5bae4a6480` boards: arm: numaker_pfm_m467: Convert to v2 `3b0bd70c8c` soc: m46x: Port to HWMv2 `d52eab9e83` boards: Convert stm32g081b_eval to HWM v2 `6f2835cb11` boards: Convert stm32g071b_disco to HWM v2 `ca36d331d2` boards: Convert stm32g0316_disco to HWM v2 `662cc4e09b` boards: Convert nucleo_g0b1re to HWM v2 `dd9bc29769` boards: Convert nucleo_g071rb to HWM v2 `353da23ffb` boards: Convert nucleo_g070rb to HWM v2 `acc932b424` boards: Convert nucleo_g031k8 to HWM v2 `cea9b140fd` boards: Convert google_twinkie_v2 to HWM v2 `52e025943a` soc: st: stm32: Migrate STM32G0 series `1c7347686a` ci: update check_compliance to not create duplicate lines in Kconfig `9debd98799` hwmv2: boards: up_squared_pro_700: Add missed intel_adl changes `adab07c42f` boards: Convert msp_exp432p401r_launchxl to HWM v2 `642aacdcdf` soc: ti_simplelink: Add missing SoC `48637066d3` boards: Fix file paths in documentation `e983bc2a23` samples/tests: Fix mps3 board name `61e0f32716` boards: Convert stm32f3_seco_d23 to HWM v2 `a1688ff641` boards: Convert stm32f3_disco to HWM v2 `35fb228599` boards: Convert stm32373c_eval to HWM v2 `10e5d1122b` boards: Convert nucleo_f334r8 to HWM v2 `c319cb19f0` boards: Convert nucleo_f303re to HWM v2 `11725ccac1` boards: Convert nucleo_f303k8 to HWM v2 `400f7f6a4f` boards: Convert nucleo_f302r8 to HWM v2 `8d84861390` soc: v2: stm32: Migrate STM32F3 series `85b9eee7e8` boards: arm: kv260_r5: Convert to v2 `dafbd638e4` boards: arm: mercury_xu: Convert to v2 `3ecd12f415` boards: arm: qemu_cortex_r5: Convert to v2 `5db2390e9d` soc: xilinx_zyncmp: Port to HWMv2 `9ba8195cdc` boards: arm: qemu_cortex_a9: Convert to v2 `8e94b85361` boards: arm: zybo: Convert to v2 `c970127fc2` soc: xilinx_zynq7000: Port to HWMv2 `394c75373c` boards: arm: ast1030_evb: Convert to v2 `f2a1cc8714` soc: ast10x0: Port to HWMv2 `28f3f25945` boards: arm: cc3235sf_launchxl: Convert to v2 `c3e480f740` boards: arm: cc3220sf_launchxl: Convert to v2 `fd5847123f` boards: arm: beagleconnect_freedom: Convert to v2 `76ba9a0587` boards: arm: cc1352p1_launchxl: Convert to v2 `719baa8850` boards: arm: cc1352r1_launchxl: Convert to v2 `5060a61ae1` boards: arm: cc1352r_sensortag: Convert to v2 `99584be1c5` boards: arm: cc26x2r1_launchxl: Convert to v2 `2dc8933942` soc: ti_simplelink: Port to HWMv2 `a5b004663b` scripts/utils/board_v1_to_v2.py: couple of fixes `77c2c333e5` boards: move 96b_stm32_sensor_mez to 96boards `c14ff98650` boards: stm32f411e_disco: delete obsolete file `bcdc268ccf` boards: Convert stm32mp157c_dk2 to HWM v2 `0c8ba92e1f` boards: Convert 96b_avenger96 to HWM v2 `b54fe33077` soc: v2: stm32: Migrate STM32MP1 series `2ba3639b2a` boards: Convert nucleo_c031c6 to HWM v2 `dbc5ed79f5` soc: st: stm32: Migrate STM32C0 series `ce6d493aa3` boards: Convert stm32l1_disco to HWM v2 `a28086a9ca` boards: Convert nucleo_l152re to HWM v2 `1b2a511d06` boards: Convert 96b_wistrio to HWM v2 `ce281f09ab` soc: v2: stm32: Migrate STM32L1 series `cdb5364fd7` boards: Convert stm32f769i_disco to HWM v2 `768f173dcb` boards: Convert stm32f7508_dk to HWM v2 `21bbbbd9cb` boards: Convert stm32f746g_disco to HWM v2 `bab4265693` boards: Convert stm32f723e_disco to HWM v2 `58f8fe82ba` boards: Convert nucleo_f767zi to HWM v2 `37e9084070` boards: Convert nucleo_f756zg to HWM v2 `d467e7053a` boards: Convert nucleo_f746zg to HWM v2 `5f2808d7cc` boards: Convert nucleo_f722ze to HWM v2 `bbb73e7550` soc: st: Migrate stm32f7 series to new hw model `e9094afc4d` soc: st: stm32: stm32f4: change SOC_STM32F405XG to SOC_STM32F405XX `a1712cdd53` boards: Convert stm32f4_disco to HWM v2 `5be404b365` boards: Convert stm32f469i_disco to HWM v2 `baaa697ab2` boards: Convert stm32f429i_disc1 to HWM v2 `69ecab3c90` boards: Convert stm32f412g_disco to HWM v2 `2a572e3fb0` boards: Convert stm32f411e_disco to HWM v2 `ecfbf42757` boards: Convert stm32f401_mini to HWM v2 `e0191d03bb` boards: Convert steval_fcu001v1 to HWM v2 `4454648976` boards: Convert segger_trb_stm32f407 to HWM v2 `f0ad6ee6b8` boards: Convert olimex_stm32_p405 to HWM v2 `1f5e228ec8` boards: Convert olimex_stm32_h407 to HWM v2 `834bdb615e` boards: Convert olimex_stm32_h405 to HWM v2 `8f27fa8de2` boards: Convert olimex_stm32_e407 to HWM v2 `f8633a9038` boards: Convert nucleo_f446ze to HWM v2 `07e0bd2c07` boards: Convert nucleo_f446re to HWM v2 `24d7f625dc` boards: Convert nucleo_f429zi to HWM v2 `157a8cde53` boards: Convert nucleo_f413zh to HWM v2 `4ec99c31b0` boards: Convert nucleo_f412zg to HWM v2 `a21546140a` boards: Convert nucleo_f411re to HWM v2 `43f01ab6de` boards: Convert nucleo_f410rb to HWM v2 `60c16bcb8b` boards: Convert nucleo_f401re to HWM v2 `2db228d730` boards: Convert mikroe_mini_m4_for_stm32 to HWM v2 `73fc26225c` boards: Convert mikroe_clicker_2 to HWM v2 `6b62d90114` boards: Convert google_dragonclaw to HWM v2 `fa845af309` boards: Convert blackpill_f411ce to HWM v2 `5c8c3c3be0` boards: Convert blackpill_f401ce to HWM v2 `3c02db1290` boards: Convert blackpill_f401cc to HWM v2 `7eeb723cb7` boards: Convert black_f407zg_pro to HWM v2 `4f9461d068` boards: Convert black_f407ve to HWM v2 `a821de8532` boards: Convert az3166_iotdevkit to HWM v2 `ba580c7236` boards: Convert adi_sdp_k1 to HWM v2 `eb272ddf19` boards: Convert adafruit_feather_stm32f405 to HWM v2 `58ed121c3a` boards: Convert 96b_stm32_sensor_mez to HWM v2 `b0d70959d3` boards: Convert 96b_neonkey to HWM v2 `b1088baadc` boards: Convert 96b_carbon to HWM v2 `18d867b0a9` boards: Convert 96b_argonkey to HWM v2 `ee6ede7119` boards: Convert 96b_aerocore2 to HWM v2 `b48e70ead9` soc: v2: stm32: Migrate STM32F4 series `14d2b955da` cmake: convert path to CMake style before writing Kconfig files `9c4ac6a202` boards: posix: bsim: Update paths `14b57f56d7` tests: drivers: gpio: gpio_ite_it8xxx2_v2: Temp fix `f3b173be18` scripts: board_v1_to_v2: Update following move to boards_legacy `05b50f6691` cmake: CMake soc dir variable improvements for HWMv2 `a188e01a12` hwmv2: move all ported boards and socs to their final location `22c53e97b5` hwmv2: move all non-ported legacy boards and socs to legacy folders `53f3b181b0` soc: ti_k3: Port to HWMv2 `9f19a2075a` soc: rk3568: Port to HWMv2 `b8928b1628` soc: rk3399: Port to HWMv2 `cda3a74868` boards: arm64: qemu_kvm_arm64: Convert to v2 `70d704bd20` soc: x86: atom: move and convert to HWMv2 `4789e1068e` boards: x86: intel_rpl: move and convert raptor_lake boards to HWMv2 `384307e3dc` soc: x86: raptor_lake: move and convert to HWMv2 `ed025df674` boards: x86: intel_ehl: move and convert elkhart_lake boards to HWMv2 `994b6e1731` soc: x86: elkhart_lake: move and convert to HWMv2 `73b30a04cf` boards: x86: up_squared_pro_7000: move and convert to HWMv2 `83b133c207` boards: x86: intel_adl: move and convert alder_lake boards to HWMv2 `847a12f1e4` soc: alder_lake: move and convert to HWMv2 `67f4c8d2a1` samples: up_squared: adjust gpio_counter to HWMv2 `5326b5bfc0` boards: x86: up_squared: move and convert to HWMv2 `cfd5e691b4` soc: apollo_lake: move and convert to HWMv2 `ac9c235741` boards: xtensa: qemu_xtensa: Convert to v2 `f198c3a761` ci: update to osource for soc/Kconfig.defconfig files `e438e6cad4` ci: add SOC_SERIES_ as false positive in check_compliance.py `95e34da7c1` soc: v2: Convert st_stm32 to st/stm32 `313717df76` soc: mps3: Fix missing family `392c3969ed` boards: arm: am62x_m4: Convert to v2 `8f245d764d` tests: Update board names for hwmv2 `8f71bb7b4f` boards: arm64: khadas_edgev: Convert to v2 `e27d23aad0` soc: rk3399: Port to HWMv2 `80823b860e` boards: arm64: roc_rk3568_pc: Convert to v2 `72e4483dec` soc: rk3568: Port to HWMv2 `bed94669e3` boards: arm64: phycore_am62x_a53: Convert to v2 `c01af5a7b8` soc: ti_k3: Port to HWMv2 `1e563b4ca3` boards: arm64: xenvm: Convert to v2 `76e484adae` soc: xenvm: Port to HWMv2 `34412f7fe2` boards: arm64: rpi_4b: Convert to v2 `9be50e2ca9` soc: bcm2711: Port to HWMv2 `bbbed12c2f` boards: arm64: qemu_kvm_arm64: Convert to v2 `4f5ec7ff8f` soc: qemu_virt_arm64: Port to HWMv2 `d8d1b9f200` boards: arm64: qemu_cortex_a53: Convert to v2 `30bd34b31e` soc: qemu_cortex_a53: Port to HWMv2 `c20d0dcbb6` boards: arm64: fvp_baser_aemv8r: Convert to v2 `02ed6af463` boards: arm64: fvp_base_revc_2xaemv8a: Convert to v2 `1b175003a4` soc: fvp_aemv8*: Port to HWMv2 `de231b911d` boards: v2: Clean up obsolete comments `aa9597f6d9` boards: Convert waveshare_open103z to HWM v2 `9644828c81` boards: Convert stm32vl_disco to HWM v2 `86ab2bd430` boards: Convert stm32_min_dev to HWM v2 `d88d3ddcc4` boards: Convert stm32f103_mini to HWM v2 `0ccc0204e1` boards: Convert stm3210c_eval to HWM v2 `dd9972d782` boards: Convert olimex_stm32_h103 to HWM v2 `a2c2e1406d` boards: Convert olimexino_stm32 to HWM v2 `2d9c62e118` boards: Convert nucleo_f103rb to HWM v2 `e8ba99dc59` soc: v2: stm32: Migrate STM32F1 series `9a93916604` tests: Update board names for hwmv2 `9c4d94844d` boards: arm: bcm958401m2: Convert to v2 `feaf4ffba1` boards: arm: bcm958402m2: Convert to v2 `87f0827121` soc: bcm_vk: Port to HWMv2 `4526be24a5` boards: arm: quick_feather: Convert to v2 `cd921d2b97` boards: arm: qomu: Convert to v2 `b3c04051fc` soc: quicklogic_eos_s3: Port to HWMv2 `a73a9e7533` boards: v2: Clean up obsolete comments `8d87bcc167` boards: Convert stm32f0_disco to HWM v2 `1933585785` boards: Convert stm32f072_eval to HWM v2 `6f9fe5429d` boards: Convert stm32f072b_disco to HWM v2 `9dc78e4025` boards: Convert stm32f030_demo to HWM v2 `35113e8923` boards: Convert nucleo_f091rc to HWM v2 `b276aee9a4` boards: Convert nucleo_f070rb to HWM v2 `795f8d611b` boards: Convert nucleo_f042k6 to HWM v2 `2d82646443` boards: Convert nucleo_f031k6 to HWM v2 `959786f12d` boards: Convert nucleo_f030r8 to HWM v2 `81670db2e9` boards: Convert legend to HWM v2 `8980430aad` boards: Convert google_kukui to HWM v2 `ac020f66e0` dts: stm32f0: fix few warnings `5140e4551a` boards: v2: doc: Add vendors `77d640e0c9` soc: v2: stm32: Migrate STM32F0 series `0131e1c159` soc: v2: Add st_stm32 structure and common folder `36b63787a7` boards: v2: Add documentation index for converted boards `ae02fc5047` boards: sparc: qemu_leon3: Convert to v2 `f38f7bb223` boards: sparc: gr716a: Convert to v2 `d3cca3580e` soc: gr716a: Port to HWMv2 `6a8a0c1647` boards: sparc: generic_leon3: Convert to v2 `faf22185ce` soc: leon3: Port to HWMv2 `e94762ecdc` tests: Update board names for hwmv2 `9afcc27e05` boards: xtensa: qemu_xtensa: Convert to v2 `3e4a17018f` soc: dc233c: Port to HWMv2 `9188fdcd78` boards: xtensa: xt-sim: Convert to v2 `fcaa41cb5d` soc: xtensa_sample_controller: Port to HWMv2 `dbc413f7f7` scripts: board_v1_to_v2: Fix CONFIG_SOC_SERIES_ exclusion `6be3d4bc80` kconfig: remove Kconfig BOARD_RPI_PICO_W safe guard. `f4442fa698` boards: v2: Add documentation index for converted boards `ec5fbd67f7` boards: nios2: qemu_nios2: Convert to v2 `d3ef220460` soc: nios2-qemu: Port to HWMv2 `a223f284b5` boards: nios2: altera_max10: Convert to v2 `c381edcb73` soc: nios2f-zephyr: Port to HWMv2 `97401c7d2a` boards: mips: qemu_malta: Convert to v2 `e7a3243a24` soc: qemu_malta: Port to HWMv2 `bec82c690d` boards: v2: Add documentation index for converted boards `94f6f9b636` boards: arm: w5500_evb_pico: Convert to v2 `209235ab6e` boards: arm: sparkfun_pro_micro_rp2040: Convert to v2 `e5b1885907` boards: arm: adafruit_qt_py_rp2040: Convert to v2 `4c750818f9` boards: arm: adafruit_kb2040: Convert to v2 `8d3896caa4` boards: arm: rpi_pico: Convert to v2 `42cff42c42` soc: rpi_pico: Port to HWMv2 `c2df4ca9cb` scripts: improve yaml schema and board.yml validation for revisions `3970f90f71` cmake: clear BOARD_CACHE when invalid board identifier is given `3a70ee9ccd` cmake: improve board revision handling `3cda715fae` scripts: board_v1_to_v2: Don't add select CONFIG_SOC_SERIES_FOO `dc56a543f3` scripts: board_v1_to_v2: Add License + copyright `87147f88c4` cmake: prefer cache BOARD_IDENTIFIER over extracting from BOARD `65f5dc5b8c` cmake: fail when board identifier is applied in legacy hw model `7db2b6efd8` cmake: cache BOARD_IDENTIFIER to preserve it between CMake invocations `85dddac5a2` scripts: using extend in list_boards for variant list `6ae5c4e7fd` scripts: utils: add board v1->v2 conversion utility `ef834a12d0` maintainers: update Renesas RZT2M path `3ab7830625` boards: renesas: add documentation entry `a0c2ca0491` boards: arm: add documentation entry `27ff3654b7` boards: gigadevice: add documentation entry `6e02f43c0a` maintainers: update GD32 paths `1bfcf1d974` boards: gd32l233r_eval: convert to HWMv2 `6e621ee43f` boards: gd32f470i_eval: convert to HWMv2 `219b149768` boards: gd32f450z_eval: convert to HWMv2 `91c52b0d39` boards: gd32f450v_start: convert to HWMv2 `f0e0a973f6` boards: gd32f407v_start: convert to HWMv2 `6f592b64c9` boards: gd32f403z_eval: convert to HWMv2 `4bcb4b2ac8` boards: gd32f350r_eval: convert to HWMv2 `fdc7ed6eb0` boards: gd32e507z_eval: convert to HWMv2 `770376250d` boards: gd32e507v_start: convert to HWMv2 `a6d8b92e86` boards: gd32e103v_eval: convert to HWMv2 `a5f8e5daa1` boards: gd32a503v_eval: convert to HWMv2 `5ee799cc5f` boards: gd32f450i_eval: convert to HWMv2 `8aa8ce4ac8` soc: gigadevice: port to HWMv2 `4e203c14c7` cmake: enhanced board entry file handling `312265ee04` scripts: make SoC field mandatory in board.yml `c12ae3bcbc` boards: update Renesas rzt2m board.yml to contain SoC information `c5321c1dbe` cmake: make SoC optional for boards containing a single SoC `bcc06c60ae` scripts: support SoC list output for boards `db9e46010c` twister: update testcase.yaml and sample.yaml to mps3/an547 identifier `a988adee7d` boards: update arm mps3 an547 board to HWMv2 scheme `7dc2c9db0c` soc: use HWMv2 for arm mps3 SoC `c506675b7c` boards: update Renesas Starter Kit+ for RZ/T2M board to HWMv2 scheme `3abb792073` soc: use HWMv2 for renesas_rzt2m SoC `4f52bc646e` cmake: support hw model v2 in arch/Kconfig tree `a712b5005b` scripts: extend kconfig compliance to verify board / SoC scheme v2 `baa55141a1` twister: update twister testplan.py to handle HWMv2 boards `1f026f70eb` boards: extend list_boards.py and update boards CMake module `bd854a3af8` cmake: introduce arch and soc cmake modules for hw model v2 `c9edefa8fd` arch: add existing archs to archs.yml for HWMv2 support `61bbfb5ba2` scripts: introduce list_hardware.py for listing of architectures and SoCs `a4d1980c35` build: board/ soc: introduce hw model v2 scheme Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com> Signed-off-by: Declan Snyder <declan.snyder@nxp.com> Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com> Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com> Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no> Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com> Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com> Signed-off-by: David Leach <david.leach@nxp.com> Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com> Signed-off-by: Anas Nashif <anas.nashif@intel.com> Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com> Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com> Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no> Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com> Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com> Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com> Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com> Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no> Signed-off-by: Francois Ramu <francois.ramu@st.com> Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com> Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com> Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com> Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>	1 year ago
Declan Snyder	dcedb649ca	drivers: nxp_enet: Fix build error with PTP on Fix build errors in nxp enet driver during case where PTP on, and add coverage to CI. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	1 year ago
Declan Snyder	1011acd4d7	drivers: nxp_enet: Improve code readability Improve code readability of this driver by simplifying and reworking some of the source code, formatting and comments. This commit is not meant to cause any functional difference. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	2 years ago
Declan Snyder	79b00f6cd3	drivers: nxp_enet: Add link state logging message Add info logging message to NXP ENET MAC driver about link state. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	2 years ago
Declan Snyder	20af909df5	drivers: nxp_enet: Do clock init from zephyr Need to do the ENET module-level clock initialization from zephyr instead of MCUX HAL, because now there are multiple zephyr drivers with different init priorities that rely on the module being clocked. MDIO must be initialized before the ENET MAC, and the MAC driver currently calls ENET_Init from the HAL to initialize the clock, but MDIO needs the module clock enabled first on some platforms. So replace the MAC init with ENET_Up from the HAL, which doesn't include clock init, then do clock init from a higher priority sys init based on the parent compatible. Also, add support for enet clock ungating with clock_control_on on ccm driver do this with current platforms supported. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	2 years ago
Declan Snyder	213471f2ad	drivers: nxp_enet: simplify driver header Simplify the driver header implementation, so that there are not structs and unions different per each situtaion, and make just one function for the enet module drivers to call on each other. Also, capitalize existing enums. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	2 years ago
Declan Snyder	fa73697735	drivers: eth_nxp_enet: Support PTP Support PTP functionality in NXP ENET MAC driver Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	2 years ago
Declan Snyder	fe809c8b24	drivers: ethernet: Add NXP ENET Driver Add driver for NXP ENET which is a rework of the old eth_mcux.c driver which had become unmaintainable due to fundamental problems with the lack of PHY abstraction. eth_mcux.c and the corresponding compatible nxp,kinetis-ethernet will be deprecated and this new driver will be supported instead. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	2 years ago

15 Commits (1bcae0ea9f9f47cfa105022f3707f9309d6607f5)