zephyr

Commit Graph

Author	SHA1	Message	Date
Karol Lasończyk	061036f9e3	tests: samples: Extend support for nRF54LM20A Extends support and adds new overlays. Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no> Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>	2 weeks ago
Greg Leach	2aff40b1b1	tests: Add BL54L15/L15u DVK support Adds support for the BL54L15 and BL54L15u DVK boards. Signed-off-by: Greg Leach <greg.leach@ezurio.com>	3 months ago
Matthias Hauser	941a5489d3	dts: boards: we: add board Ophelia-IV add new board Ophelia-IV Signed-off-by: Matthias Hauser <matthias.hauser@we-online.de>	3 months ago
Krzysztof Chruściński	24c01a99c9	tests: drivers: uart: uart_pm: Disable device runtime PM Explicitly disable device runtime PM since this test is expecting it to be disabled and there are SoC now that turns on it by default. Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>	3 months ago
Krzysztof Chruściński	70118c06a5	drivers: serial: nrfx_uarte: Deprecate non-legacy shim Some time ago a new shim for nRF UARTE was added (uart_nrfx_uarte2.c) which used nrfx_uarte.c driver underneath. It was supposed to support nrf54x platforms. However, later on legacy driver (uart_nrfx_uarte.c) was extended to support nrf54x platforms and it takes less code size, has better performance and more features. Shim uart_nrfx_uarte2 will no longer be supported. As new shim is the default and there is a Kconfig to pick the legacy shim (CONFIG_UART_NRFX_UARTE_LEGACY_SHIM=y) it cannot be deprecated in the normal way. Additional Kconfig option is created (DEPRECATED_UART_NRFX_UARTE_LEGACY_SHIM) which is enabled if CONFIG_UART_NRFX_UARTE_LEGACY_SHIM=n and it selects DEPRECATED. A warning was also added to the CMakeLists.txt. Patch removes use CONFIG_UART_NRFX_UARTE_LEGACY_SHIM in tests. Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>	6 months ago
Krzysztof Chruściński	72d0ed7782	tests: drivers: uart: Add nrf54l09pdk_nrf54l09_cpuapp target Add new target to the following tests: - uart_elementary - uart_async_api - uart_mix_fifo_poll - uart_pm Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>	6 months ago
Rafał Kuźnia	07ee796c7d	tests: nrf: enable twister tests for nrf54l20pdk Enabled the following tests on nrf54l20 - i2c_slave - clock_control_api - nrf_clock_calibration - nrf_lf_clock_start - onoff - retained_mem/api - uart_elementary - uart_errors - uart_mix_fifo_poll - uart_pm - uart_async_api - wdt_error_cases - wdt_basic_api - counter_basic_api - fcb - nrf/qdec Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>	7 months ago
Krzysztof Chruściński	384e940c66	drivers: serial: nrfx_uarte: Deprecate CONFIG_UART_x_NRF_HW_ASYNC Deprecate mode which is using TIMER+(D)PPI for reliable byte counting. Recently a new approach is added (CONFIG_UART_NRFX_UARTE_ENHANCED_RX) which supports reliable byte counting without additional HW resource. This mode is planned to be the only supported RX path mode. Enhanced RX has slightly different behavior. There are no partial RX packets (events with non-zero offset). There is UART_RX_BUF_RELEASED after each UART_RX_RDY event. Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>	7 months ago
Anas Nashif	b207035851	tests: add integration_platforms and misc optimizations Add integration_platforms to many tests that use platform_allow to manage scope of pull_request CI. Signed-off-by: Anas Nashif <anas.nashif@intel.com>	8 months ago
Alberto Escolar Piedras	9c386cab93	tests uart_pm: Enable for nrf54l15bsim Enable this test in the simulated nrf5340 and provide an appropriate overlay. Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>	8 months ago
Alberto Escolar Piedras	5321941a5d	tests uart_pm: Enable for nrf5340bsim Enable this test in the simulated nrf5340 and provide an appropriate overlay. Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>	8 months ago
Krzysztof Chruściński	cbe0abfd00	tests: drivers: uart: uart_pm: Disable PM_DEVICE_SYSTEM_MANAGED When PM_DEVICE_SYSTEM_MANAGED is enabled (and that's the default) all devices are suspended when device go to idle state (through pm subsystem and not through just cpu_idle). In this test we are manually controlling PM of the DUT so we don't want that. Additionally, suspend action is taking a semaphore and it is illegal in idle thread (where system managment operates) which causes assert in kernel scheduler. Removed for nrf54h20 as it applies only there. Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>	9 months ago
Katarzyna Giądła	436d1bf628	samples: tests: Add support to tests on nrf54l15 DK Align all existing samples/tests/applications which contains nrf54l15pdk/nrf54l15/* by adding nrf54l15dk/nrf54l15/* to enable twister builds. Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no> Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>	10 months ago
Piotr Kosycarz	f9ee925bb7	tests: drivers: uart: uart_pm fix 'rxbuf' may be used uninitialized Fix for uart_pm/src/main.c:106:23: error: 'rxbuf' may be used uninitialized [-Werror=maybe-uninitialized] string.h:62:10: note: by argument 2 of type 'const void ' to 'memcmp' 62 \| int memcmp (const void , const void *, size_t); \| ^~~~~~ tests/drivers/uart/uart_pm/src/main.c:69:17: note: 'rxbuf' declared here 69 \| uint8_t rxbuf[32]; \| ^~~~~ Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>	1 year ago
Krzysztof Chruściński	8e65ed94cb	tests: drivers: uart: uart_pm: Add support for nrf54h20dk Add configuration for nrf54h20dk. Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>	1 year ago
Krzysztof Chruściński	c72b6a75ba	tests: drivers: uart: uart_pm: Limit scope for nrf54l15 Some configurations which are not valid for nrf54l15. Mainly those which are using ENHANCED_POLL_OUT option which is not applicable for nrf54l15 because it has ENDTX_STOPTX short so PPI connection is not needed. Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>	1 year ago
Krzysztof Chruściński	3424c7af7f	tests: drivers: uart: uart_pm: Minor adjustments in the test Modifying arbitrary delay to cover for receivers with timeout. Adding a delay between polling and asynchronous checking to cover for cases when CPU processing is fast enough so that both checks may overlap. Allow error code for uart_rx_disable call. Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>	1 year ago
Krzysztof Chruściński	a0bb05eb4c	tests: drivers: uart: uart_pm: Call pm action from the thread context PM action shall be called from the thread context thus switching to k_work instead of the k_timer. Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>	1 year ago
Torsten Rasmussen	8dc3f85622	hwmv2: Introduce Hardware model version 2 and convert devices This is a squash of the ``collab-hwm`` branch which converts all in-tree boards to hardware model version 2 including build system changes, board updates and soc conversions. This squash is a combination of the following commits: ca214745a1 soc: Remove soc_legacy folder and move ARM Kconfig `f12cb0979f` scripts: ci: check_compliance: remove HWMv1 checks `1807bcf4d4` boards: mimx8mq_evk: port to HWMv2 `3ec2299c62` soc: nxp: port imx8mq SOC to HWMv2 `8ea02f4e63` boards: verdin_imx8mp: convert to HVMv2 `f2eb7652ce` boards: phyboard_pollux: move to HVMv2 `ab509a5ee0` boards: nxp: mimx8mp_evk: port M7 core to HWMv2 `06ad037f99` soc: nxp: imx8mp: port M7 core to HWMv2 `3f9e706859` boards: mimx8mm_phyboard: convert to HVMv2 `204372d264` boards: imx8mm_evk: port CM4 core to HWMv2 `f82c961a46` soc: nxp: imx8mm: port iMX8MM M4 core to HVMv2 `6987b2e305` boards: pico_pi: convert to HVMv2 `84484e6707` boards: warp7: convert to HWMv2 `ae443d1e3c` boards: meerkat96: port to HWMv2 `e3629c64e6` boards: colibri_imx7d: port to HWMv2 `fc835d893d` soc: nxp: convert iMX7 Dual core to HWMv2 `29ef2f23eb` boards: udoo_neo_full: convert to HWMv2 `fd49b1749e` soc: nxp: convert iMX6 SoloX core to HWMv2 `1e59b7a3fd` soc: nxp: imxrt11xx: only set CONFIG_CPU_HAS_FPU_DOUBLE_PRECISION for M7 `69bb0eb258` hwmv2: MAINTAINERS: Fix NXP maintainer yaml `1c4458890f` boards: firefly: roc_rk3568_pc: Fix SMP configuration `651a4370ad` boards: Fix variants and revisions `196cfda66d` tests/samples: Drop default revision identifiers `6ec6b1d75a` boards: Drop revision from twister identifiers for default revisions `b774cdd59f` scripts: utils: board_v1_to_v2: drop board_legacy prefix `7aa36e6640` boards: riscv: esp32c3_luatos_core: make usb variant `fe25709a9c` twister: add unit_testing soc and board `f88f211b4e` scripts: ci: check_compliance: improve the "not sorted" command `b21a455dfb` bluetooth: controller: Fix openisa checks `fdc76c48a7` workflow: compliance: Add rename limit `14ecafc67d` dts: bindings: vendor-prefixes: Sort entries `dbc366c3c7` soc: nxp: lpc: Move wrong configurations `8e02c08f96` maintainers: Fix invalid paths `b1b85e2495` boards: up: Fix spaces `58cc4013b3` maintainers: Fix xen path `66ce5c0b09` boards/soc: Add missing copyright headers `bb47243254` boards: qemu: x86: Remove pointless file `2e816a8a3a` samples: tests: update esp32-based board naming `9aeab17139` samples: tests: remove platform_exclude of esp32 boards `a4fe97b9de` boards: shields: m5stack_core2_ext: update board name `615fcab94a` samples: ipm_esp32: fix board labels and skip testing `7752f69b7f` boards: legacy: remove index entry for xtensa/riscv boards. `3eba827956` MAINTAINERS: update Espressif entries `914362bbd5` boards: xtensa: yd_esp32: Convert to v2 `a62278fd23` boards: xtensa: xiao_esp32s3: Convert to v2 `b6a11ccec4` boards: xtensa: olimex_esp32_evb: Convert to v2 `c1067c16d2` boards: xtensa: odroid_go: Convert to v2 `b8340b0109` boards: xtensa: m5stickc_plus: Convert to v2 `9d81e417be` boards: xtensa: m5stack_stamps3: Convert to v2 `c296672720` boards: xtensa: m5stack_core2: Convert to v2 `fada12aa9d` boards: xtensa: m5stack_atoms3_lite: Convert to v2 `fe37ebac1e` boards: xtensa: m5stack_atoms3: Convert to v2 `d32828fe6a` boards: xtensa: kincony_kc868_a32: Convert to v2 `5afba7855b` boards: xtensa: heltec_wireless_stick_lite_v3: Convert to v2 `ca48c17723` boards: xtensa: heltec_wifi_lora32_v2: Convert to v2 `db1fd4d229` boards: xtensa: esp32s3_luatos_core: Convert to v2 `a78b2552eb` boards: xtensa: esp32s3_devkitm: Convert to v2 `cc96061d96` boards: xtensa: esp32s2_saola: Convert to v2 `ed854e05d1` boards: xtensa: esp32s2_lolin_mini: Convert to v2 `4fa1ae8110` boards: xtensa: esp32s2_franzininho: Convert to v2 `5543040a18` boards: xtensa: esp_wrover_kit: Convert to v2 `2335ae79b3` boards: xtensa: esp32_ethernet_kit: Convert to v2 `f910b7ad4f` boards: xtensa: esp32_devkitc_wrover: Convert to v2 `32104db555` boards: xtensa: esp32_devkitc_wroom: Convert to v2 `e23a41200d` boards: riscv: icev_wireless: Convert to v2 `3c670e4e53` boards: riscv: xiao_esp32c3: Convert to v2 `fc7c6a060b` boards: riscv: stamp_c3: Convert to v2 `22c2edb89c` boards: riscv: esp32c3_luatos_core: Convert to v2 `0a96dcb778` boards: riscv: esp32c3_devkitm: Convert to v2 `be1ee1c446` vendors: update vendors lists `5e6c62137f` soc: espressif_esp32: Port to HWMv2 `037a3b52a4` boards: Raspberry Pi pico pwm led adjustment `7277cae6fa` samples: blinky_pwm: enable pwm_leds in rpi_pico overlay `da3e49d34e` boards: nxp: update selection of FLASH_MCUX_FLEXSPI_XIP_MEM_TARGET `bc8424dd3b` soc: nxp: imxrt: move FLASH_MCUX_FLEXSPI_XIP_MEM_TARGET to SOC level `041cb52939` soc: brcm: bcm_vk: Rename to bcnvk `576b43a95c` soc: Fix SOC_FAMILY name mismatches `e8f3e6494d` hwmv2: boards: intel: adsp: Fix runner after paths renamed `550399e927` boards: weact: stm32g431_core: Add wrongly deleted file back `08708c909e` tests: drivers: flash: Renamed missed board rename `06dac41e68` hwmv2: Convert Seagate Faze board to hwmv2 `dd8f842b40` hwmv2: nxp: update MAINTAINER paths for hwmv2 `b4d1c04978` hwmv2: lpc: updated overlay and conf files in samples and tests `067c69089e` boards: nxp: convert lpcxpresso55s69 to hwmv2 `097205b40a` hwmv2: Global fix of lpc54114_m4 overlay and conf files `d8cfa6fb29` boards: nxp: convert lpcxpresso54114 to hwmv2 `c29ed228c6` boards: nxp: convert lpcxpresso55s36 to hwmv2 `88cfd3d6ac` boards: nxp: convert lpcxpresso55s28 to hwmv2 `ad30c940ee` boards: nxp: convert lpcxpresso55s16 to hwmv2 `9e5a10ec80` boards: nxp: convert lpcxpresso55s06 to hwmv2 `5650c83268` boards: nxp: convert lpcxpresso51u68 to hwmv2 `82cf44be45` boards: nxp: convert lpcxpresso11u68 to hwmv2 `1a9c405a6f` soc: nxp: convert LPC SOC family to hardware model V2 `f2b536d253` boards: intel: doc: hwmv2: Fix some renamed paths `5ee6058710` samples/tests: Use board revisions `b76687602f` boards: Add yaml files for boards missing revisions `32ae4918d0` boards: nordic: Fix board names `cc1dabca65` MAINTAINERS: Update for renamed folders `a37ddce659` soc: xilinx: Rename to xlnx `a1393a07f6` soc: xenvm: Rename to xen `813ed00f67` soc: raspberry_pi: Rename to raspberrypi `71317d6798` soc: cadence: Rename to cdns `8cb0c51ec6` soc: broadcom: Rename to brcm `2b9db15c69` soc: andes: Rename to andestech `0101216ce1` soc: altera: Rename to altr `4b4c3ca65d` boards: wurth_elektronik: Rename to we `cdc3ef499f` boards: ublox: Rename to u-blox `cabdd4ad05` boards: space_cubics: Rename to sc `4b5bd7ae8a` boards: seeed_studio: Rename to seeed `a992785ceb` boards: raspberry_pi: Rename to raspberrypi `3c1cdc20fe` boards: laird_connect: Rename to lairdconnect `291c7cde2b` boards: cadence: Rename to cdns `95db897526` boards: broadcom: Rename to brcm `0a47b94879` boards: beagleboard: Change to beagle `9f9f221c24` boards: andes: Rename to andestech `e7869ca38a` boards: altera: Rename to altr `bf2fb5eca3` various: Change SOC_FAMILY_NRF to SOC_FAMILY_NORDIC_NRF `e25730ba56` modules: tf-m: Rename from nordic_nrf to nordic `9e3466606a` boards: nordic_nrf: Rename to nordic `09a398dcc8` soc: nordic_nrf: Rename to nordic `cb8ffc74f8` boards: renode: Add documentation index `2291ff4b55` boards: arm: riscv32_virtual: Convert to v2 `484b7f1996` soc: riscv_renode_virtual: Port to HWMv2 `cc5c2fb0c7` soc: raspberry_pi: Fix SOC_SERIES and SOC mismatch `59cb580513` soc: arm: designstart: Fix SOC_SERIES and SOC mismatch `aa9e0de7af` samples: Fix invalid links `a1480cf1cf` maintainers: Fix paths `0d719e004b` boards: Update documentation links `eb5c3e6f79` boards: wurth_elektronik: Drop duplicate prefix `a34a3640b7` boards: waveshare: Drop duplicate prefix `cf50e950e7` boards: weact: Drop duplicate prefix `737cfb548f` boards: sparkfun: Drop duplicate prefix `505494c97a` boards: segger: Drop duplicate prefix `4eaf69f37a` boards: ruuvi: Drop duplicate prefix `a1335caeae` boards: ronoth: Drop duplicate prefix `a9f7f30bf6` boards: raytac: Drop duplicate prefix `80db4c81b3` boards: qemu: Drop duplicate prefix `433d7e9976` boards: particle: Drop duplicate prefix `4ea79d19e7` boards: olimex: Drop duplicate prefix `fd4ae6f6a8` boards: mikroe: Drop duplicate prefix `36080549bd` boards: khados: Drop duplicate prefix `169bf8ae1d` boards: intel: Drop duplicate prefix `25f04d5222` boards: holyiot: Drop duplicate prefix `11c2af0de8` boards: google: Drop duplicate prefix `d5128f4016` boards: ebyte: Drop duplicate prefix `44fbc68cad` boards: dragino: Drop duplicate prefix `f7fe431b44` boards: contextual_electronics: Drop duplicate prefix `9094fea63b` boards: circuit_dojo: Drop duplicate prefix `b632acc1fc` boards: blue_clover: Drop duplicate prefix `1a3316ebdc` boards: bbc: Drop duplicate prefix `71c0344f8c` boards: arduino: Drop duplicate prefix `f0176fc25f` boards: altera: Drop duplicate prefix `36b920ed0f` boards: adi: Drop duplicate prefix `22520368d9` boards: adafruit: Drop duplicate prefix `296acfb2bc` boards: actinius: Drop duplicate prefix `55063380b7` boards: 96boards: Drop duplicate prefix `1f93394b55` boards: nxp: convert mimxrt595_evk to hardware model v2 `e7a4fd2ec1` soc: nxp: rt5xx: convert RT5xx SOC to HWMv2 `01942f1d11` twister: normalize platform name when storing files/data `477c8b84dd` twister: tests: test with slashes in platform names `64e3e816c4` soc: Add include guards `3a7aa2fa49` gitignore: update the compliance file list `84e1c17ad9` scripts: ci: check_compliance: add a check for board yml file `a90f53ad57` boards: sync up the vendor tags and vendor-list `af9aa65299` dts: vendor-prefixes: add keep-sorted markers `50f0bf05a3` dts: vendor-prefixes: sort the vendor list `a10b614aa4` dts: vendor-prefixes: ensure all prefixes are lowercase `5abe735e93` manifest: update SOF sha for NXP HWMv2 `9ab8f64ca9` modules: rename SOC_FAMILY_IMX `483ff8dd4d` modules: mcux: remove SOC_FAMILY_NXP_ADSP `f113dd5342` samples: update board name `39b31287d9` boards: nxp: Convert i.MX ADSP boards to hardware model v2 `1511e356a2` soc: nxp: Port i.MX ADSP family to hardware model v2 `c91e25ab47` soc: mec: rename all mec1501x reference to mec15xx `1c231fd939` hwmv2: boards: Convert IMXRT boards `417cff1e60` hwmv2: soc: Port IMXRT family to HWMV2 `28d4e41b1b` hwmv2: clean up arm64 soc and board empty directory `2b520f83cb` hwmv2: port NXP SoC LS1046A to V2 `bf7899c645` hwmv2: port nxp_ls1046ardb board to V2 `33f7b61866` samples/tests: Rename numaker boards `8f20ea6e93` boards: nuvoton: numaker_pfm: Split into 2 boards `7cf4ff43a1` drivers: pinctrl: imx: align with hwm v2 `c68e1fea4e` drivers: clock_control: ccm_rev2: align with hwm v2 update `3b49014a0f` hwmv2: move imx8mn EVK board to V2 `14f344eeab` hwmv2: move imx8mp EVK board to V2 `40f3f8f22d` hwmv2: move imx8mm EVK board to V2 `10bf79ea51` hwmv2: move imx8m soc for a-core to V2 `8727d5ca80` hwmv2: move imx93 EVK board to V2 `c81ef01563` hwmv2: move imx93 soc to V2 `5836c1b699` modules: mcux: introduce CONFIG_MCUX_CORE_SUFFIX `338f6f2bf1` doc: update board porting guide to match new hardware model `9639a1b5dc` soc: silabs: drop useless defconfigs `981807444e` soc: silabs: introduce SOC_GECKO_SDID `5d07e82485` soc: silabs: SOC_FAMILY_* replace SOC_GECKO_SERIES* `2fd081ac86` soc: silabs: align comments with soc tree `66d425f571` soc: silabs: split in families `5bd38f47a9` arch: arch: kconfig: Fix wrong placement of endmenu `00c6ef25be` tests/samples: Rename overlay files for renamed boards `0c639b8378` boards: Fix bools and selections `c2ef907d1d` drivers: flash: it8xxx2: Add missing Kconfigs `553de2ebc9` soc: ite: ec: it8xxx2: Fix SOC_SERIES being in wrong file `b8ec0080c2` boards: Documentation link fixes `eb7025e50f` tests: Update board names for hwmv2 `10ef3d4bd2` boards: silab: Add documentation index file `ba9fdaa1d6` boards: arm: efr32_radio: Convert to v2 `86c8d4a0ca` boards: arm: efm32pg_stk3402a: Convert to v2 `575ac5cafb` manifest: Update hal_silabs `87b2907304` boards: arm: efr32_thunderboard: Convert to v2 `14b30055ab` boards: arm: efr32mg_sltb004a: Convert to v2 `0012bfc15d` boards: arm: efr32xg24_dk2601b: Convert to v2 `f526225ead` boards: arm: efm32wg_stk3800: Convert to v2 `19e7df29df` boards: arm: efm32pg_stk3401a: Convert to v2 `0bd7d963d6` boards: arm: efm32hg_slstk3400a: Convert to v2 `795a90f9bf` boards: arm: efm32gg_stk3701a: Convert to v2 `43d5540be7` boards: arm: efm32gg_slwstk6121a: Convert to v2 `065148d856` boards: arm: efm32gg_sltb009a: Convert to v2 `1dc9a8aa17` soc: silabs_exx32: Port to HWMv2 `763571e878` tests: Expand names `dae301b8a3` boards: xen: xenvm: Expand name `19e60eef36` boards: qemu: qemu_cortex_a53: Expand names `a0a7c30f28` soc: intel: intel_adsp: Fix issues `df9a4223fe` scripts: ci: introduce soc name check in check_compliance `ed401abaff` soc: emsdsp: align SoC name defined in soc.yml to Kconfig SOC setting `fc78e5eaa4` MAINTAINERS: update RISC-V arch area paths `4e586958ff` boards: convert QEMU RISC-V 64 bit board to Zephyr HWMv2 `f4c31a2b86` boards: convert QEMU RV32E board to Zephyr HWMv2 `5b2ffc652b` boards: convert QEMU RISC-V 32 bit board to Zephyr HWMv2 `5db061a4c6` soc/riscv: convert the QEMU virt RISCV-32 SoC to HWMv2 `6547845e9d` boards: convert SparkFun RED-V Things Plus to Zephyr HWMv2 `95a1f96399` boards: convert SiFive HiFive Unmatched to Zephyr HWMv2 `e563eb0a62` soc/sifive/sifive_freedom: add SiFive Freedom FU740 SoC `8914bc58b6` boards: convert SiFive HiFive Unleashed to Zephyr HWMv2 `7e8de1e781` soc/sifive/sifive_freedom: add SiFive Freedom U540 SoC `bfcc2ed18f` boards: convert SiFive HiFive1 Rev. B to Zephyr HWMv2 `330fc38f9f` boards: convert SiFive HiFive1 to Zephyr HWMv2 `b9e06f4c38` soc/sifive/sifive_freedom: add SiFive Freedom E310 SoC `4b90b30b9d` scripts: west_commands: completion: Add hwmv2 complete to fish `0f6842e2fa` scripts: west_commands: completion: Add hwmv2 complete to zsh `b2af1e1737` scripts: west: list_boards: Fix hwmv2 output `686a4b78b8` scripts: west_commands: completion: Add hwmv2 complete to bash `396b6bb856` soc: nxp: fix typo in SoC name `765299c627` soc: broadcom: align SoC names defined in soc.yml to Kconfig SOC setting `7efd46eb41` soc: arm: align SoC names defined in soc.yml to Kconfig SOC setting `505cbc5c42` soc: mec: align SoC names defined in soc.yml to Kconfig SOC setting `951a140701` soc: ti: define SOC name in Kconfig `a795d28810` snippets: Initial HWMv2 support `f9a957e6f6` boards: nordic: nrf9160dk: Fix missing nrf52840 config `df994e7ee8` soc: xilinx: zync7000: Remove xilinx from soc series name `8dfabd56ca` soc: cypress: Add protection guard to file `447b951593` tests: kernel: tickless: Remove old board name `bad5dfa71f` boards: nordic: nrf5340dk: Fix board names `ad2e863f39` soc: atmel: Use new family prefix `3f08e714b2` soc: intel_adsp: hwmv2: Align SOC_SERIES_INTEL_ACE name and value `6734597a76` soc: intel_adsp_cavs: hwmv2: Align SOC_SERIES name and value `2908af0bcc` boards: nrf51dk/dongle: change SoC to nRF51822 `d1ceb29fca` soc: align CONFIG_SOC values to match soc.yml names `4768ccaf70` tests: drivers: gpio: gpio_api_1pin: exclude hifive1 `ebdb0879ad` boards: nxp: s32z2xxdc2: convert to hwmv2 `ae82580d08` boards: nxp: mr_canhubk3: convert to hwmv2 `c5f0defbae` boards: nxp: ucans32k1sic: convert to hwmv2 `1e46cabce6` soc: nxp: convert NXP S32 family to hwmv2 `f2f85133f2` soc: stm32: Rename series path `86642f4e78` soc: stm32: Rename Kconfig SOC_SERIES symbols `c61e807896` soc: stm32: Cleanup Kconfig.defconfig files `ca46c8abc9` tests: Fix board names `fbfed5f48f` maintainers: Update synopsys entries `8cd8b1cc47` boards: synopsys: Add documentation index `6f6cc57a04` boards: arc: hsdk4xd: Convert to v2 `c4c14a54ca` soc: snps_arc_hsdk4xd: Port to HWMv2 `06c2054e5c` boards: arc: iotdk: Convert to v2 `ff0e0fce1b` soc: snps_arc_iot: Port to HWMv2 `334264c46a` boards: arc: emsdp: Convert to v2 `8b947a0e91` soc: snps_emsdp: Port to HWMv2 `990417bbde` tests: Update board names for hwmv2 `e12719154a` boards: arc: em_starterkit: Convert to v2 `437a430fbe` soc: snps_emsk: Port to HWMv2 `f93387f968` boards: arc: hsdk: Convert to v2 `1cf2498b13` soc: snps_arc_hsdk: Port to HWMv2 `47abe81256` boards: arc: nsim: Convert to v2 `1e33786dc4` soc: snps_nsim: Port to HWMv2 `7f081914db` boards: arc: qemu_arc: Convert to v2 `bc97349dbd` soc: snps_qemu: Port to HWMv2 `a9902ff58e` boards: Use zephyr_file for file links `126e1a4e72` boards: Fix invalid documentation links `899f0257c3` boards: stm32wb: Restore missing .defconfig files `790c10b1ee` soc: x86/atom: imply mmu, do not select it `faee62088d` boards: x86: remove qemu_x86_tiny_768 `c34d186a57` x86: atom: remove soc.h with unused content `1be3a9e9d3` x86: remove legacy ia32, use atom instead `60e6b400f9` boards: qemu: move qemu_x86 -> x86 `c4fbac27e8` boards: infineon: Add documentation index `b4dd29a9c4` maintainers: Update paths for hwmv2 `380f5fdb2b` boards: cypress: Add documentation index `9de981be05` boards: arm: xmc47_relax_kit: Convert to v2 `6394e8a348` boards: arm: xmc45_relax_kit: Convert to v2 `04dbf17e19` soc: xmc_4xxx: Port to HWMv2 `c9731f1bce` boards: arm: cy8cproto_063_ble: Convert to v2 `53d41869d1` boards: arm: cy8cproto_062_4343w: Convert to v2 `46c4f01427` boards: arm: cy8ckit_062s4: Convert to v2 `d285e19cf2` boards: arm: cy8ckit_062_wifi_bt: Convert to v2 `2bebd7298c` boards: arm: cy8ckit_062_ble: Convert to v2 `af243274c2` soc: psoc6 and psoc_6: Port to HWMv2 `105a2bae84` cmake: modules: boards: Fix board deprecation for HWMv2 `dca54e000a` cmake: modules: boards: Enhance board aliases for HWMv2 `fc314e8e3f` cmake: modules: boards: Fix BOARD_ALIAS `9a7c2ce6d5` soc: gaisler: Move Kconfig file `1ac56d0501` soc: soc_legacy: mips: Remove out file `c054381a7a` boards: adjust few boards/ paths `4d93b8d9fd` boards: convert all microchip MEC boards to hwmv2 `ab2fcb1245` soc: convert microchip_mec to hwmv2 `ead4b57a7b` soc: arm64: intel_socfpga: hwmv2: Rename SoCs `d4c143d306` MAINTAINERS: intel_socfpga: Adjust to HWMv2 move `70a66ac03a` boards: arm64: intel_socfpga: Move boards to subdirectories `8a85c07799` boards: arm64: intel_socfpga_agilex5_socdk: move to HWMv2 `8c253a99fc` boards: arm64: intel_socfpga_agilex_socdk: move to HWMv2 `ab883b8019` soc: arm64: intel_socfpga: Move and convert to HWMv2 `7c8b7a153b` soc: arm: intel_socfpga_std: Rename with HWMv2 `8dc2b911f6` soc: board: intel_socfpga_std: Align names to 'Cyclone V' `402366117a` soc: arm: intel_socfpga_std: Align board subdirectory `f0a8d12745` boards: arm: cyclonev_socdk: Move to HWMv2 `2271f17a86` soc: arm: intel_socfpga_std: Move and convert to HWMv2 `841c2a9d99` boards: riscv: beaglev_fire: Convert to v2 `3b314531ab` boards: riscv: mpfs_icicle: Convert to v2 `d4ea2bf70b` boards: riscv: m2gl025_miv: Convert to v2 `5256e9fcc3` soc: microchip_miv: Port to HWMv2 `18e5cf1d51` maintainers: Update path for hwmv2 `eab8628f98` boards: arm: qemu_cortex_m3: Convert to v2 `1532f2fee1` soc: ti_lm3s6965: Port to HWMv2 `430ca6a475` maintainers: Update ambiq paths `a9b9b41b91` boards: ambiq: Add index `db0271ecbb` boards: arm: apollo4p_blue_kxr_evb: Convert to v2 `957e2b2061` boards: arm: apollo4p_evb: Convert to v2 `5a90a44454` soc: ambiq: Port to HWMv2 `a20c113fbd` boards: nxp: convert ip_k66f to hwmv2 `34e3852a54` boards: nxp: convert usb_kw24d512 to hwmv2 `20ad604de6` boards: nxp: convert twr_kv58f220m to hwmv2 `2e2a7b7656` boards: nxp: twr_ke18f: convert to hwmv2 `f7dcc2eb5e` boards: nxp: convert rddrone_fmuk66 to hwmv2 `b58e90a2e9` boards: nxp: convert hexiwear to hwmv2 `aae6e9e454` boards: nxp: frdm_kw41z: convert to hwmv2 `1d3baac2d6` boards: nxp: convert frdm_kl25z to hwmv2 `3b1d21483f` boards: nxp: frdm_k82f: port to hwmv2 `6046e6ded9` boards: nxp: port frdm_k64f to hwmv2 `0a7bf9fd79` boards: nxp: port frdm_k22f to hwmv2 `dce697c823` boards: nxp: add toctree placeholder `666a353409` soc: nxp: kinetis: convert kinetis SOC family to hardware model V2 `89f0a6034b` maintainers: Update paths for renesas boards/socs `004bd43c48` tests/samples/snippets: Update board names for hwmv2 `a6d756923d` boards: arm and arm64: rcar_h3ulcb: Convert to v2 `3801216b8d` boards: arm64: rcar_salvator_xs_m3: Convert to v2 `b7cc30aaea` boards: arm: rcar_h3_salvatorx_cr7: Convert to v2 `866427ea29` boards: arm: arduino_uno_r4: Convert to v2 `2689b3f0ee` soc: ra: Port to HWMv2 `e7ebc727c8` boards: arm: da1469x_dk_pro: Convert to v2 `903265b2bb` boards: arm: da14695_dk_usb: Convert to v2 `529a78ed51` soc: smartbond: Port to HWMv2 `97cf636ae0` boards: arm: rcar_spider_cr52: Convert to v2 `6d0c53f3a1` soc: rcar: Port to HWMv2 `44e0aa0668` soc: renesas: rzt2m: Move folder structure for more SoCs `85238fc205` boards: misc: Fixed STM32 based boards doc links `dffc08af56` boards: riscv: niosv_m: move and convert to HWMv2 `545093abe4` boards: riscv: niosv_g: move and convert to HWMv2 `ecfa192f1b` soc: riscv: intel_niosv: move and convert to HWMv2 `fd1e8cdc30` hwmv2: sof: intel_adsp: submanifest provisional link `8bf067e625` doc: boards: intel_adsp: Re-order pages `4833275ccd` MAINTAINERS: intel_adsp: Adjust to HWMv2 move `b9a70e5ea2` soc: intel_adsp: tools: pylint compliance workaround `18c70cc4bf` hwmv2: tests: boards: intel_adsp: Adjust board names `ca52baf9de` hwmv2: boards: intel_adsp: Overhaul board configurations `d1b3bcce64` soc: boards: xtensa: intel_adsp_ace: Rename with HWMv2 `f362a8ae2c` doc: soc: boards: intel_adsp_cavs25: Rename with HWMv2 `51dee5da92` tests: samples: boards: intel_adsp_cavs25: Rename with HWMv2 `e66c35e0d0` boards: xtensa: intel_adsp_cavs25: Rename board with HWMv2 `d1491a4810` soc: boards: xtensa: intel_adsp_cavs25: Rename with HWMv2 `fa0fca79c4` scripts: west: runners: intel_adsp: Adjust path to HWMv2 `acd18bfaf7` boards: xtensa: intel_adsp_ace20_lnl: move and convert to HWMv2 `546c94b958` boards: xtensa: intel_adsp_ace15_mtpm: move and convert to HWMv2 `8aab718c3e` boards: xtensa: intel_adsp_cavs25_tgph: change to board variant `30f17424a4` boards: xtensa: intel_adsp_cavs25: move and convert to HWMv2 `35a97cb524` soc: xtensa: intel_adsp: HWMv2 workaround for SOF config `fdc20fdff6` soc: xtensa: intel_adsp: move and convert to HWMv2 `22dc2b6391` cmake: improved board handling for revisions `2f1e33a2e6` cmake: improve arch error message for invalid arch selection `c47c37d3db` sample: basic: blinky_pwm: Exclude rpi_pico w variant `7a788b9a18` boards: raspberry_pi: rpi_pico: Use full name for w variant `7046b92d41` tests: atmel_sam: adc: Fix sam4e_xpro adc build `253ee9638c` tests: atmel_sam0: Update platform name `ccb4c63324` samples: atmel_sam0: Update platform name `2d4acf9230` boards: arduino_nano_33_iot: Convert to HWMv2 `a60d28969a` boards: arduino_mkrzero: Convert to HWMv2 `0409e51d3f` boards: arduino_zero: Convert to HWMv2 `1b2528df1b` boards: wio_terminal: Convert to HWMv2 `af1096e7ca` boards: ev11l78a: Convert to HWMv2 `0b1db9c53d` boards: adafruit_trinket_m0: Convert to HWMv2 `e9874671e2` boards: adafruit_itsybitsy_m4_express: Convert to HWMv2 `ba6c014071` boards: adafruit_grand_central_m4_express: Convert to HWMv2 `33ad4a51ca` boards: adafruit_feather_m0_lora: Convert to HWMv2 `9812f3d54e` boards: adafruit_feather_m0_basic_proto: Convert to HWMv2 `c76b1fbeca` boards: serpente: Convert to HWMv2 `649789e433` boards: seeeduino_xiao: Convert to HWMv2 `6b3bdb7364` boards: same54_xpro: Convert to HWMv2 `93dda5ee4b` boards: samr34_xpro: Convert to HWMv2 `e48e1f5d5b` boards: samc21n_xpro: Convert to HWMv2 `f11cf73df1` boards: saml21_xpro: Convert to HWMv2 `ac73ed6dcd` boards: samd20_xpro: Convert to HWMv2 `0fdbe3552e` boards: samd21_xpro: Convert to HWMv2 `854cff3905` boards: samr21_xpro: Convert to HWMv2 `a87ea5bc0a` soc: atmel: sam0: Port to HWMv2 `706e5d27cd` boards: riscv: neorv32: Convert to v2 `d1edcdd088` soc: neorv32: Port to HWMv2 `0f7add89ca` boards: native_sim/posix: Add 64bit versions as variants `b6edad8d68` soc: soc_legacy: remove the arm/st_stm32 folder `c58e0822a6` boards: Convert nucleo_f207zg to HWM v2 `b987093a80` soc: v2: stm32: Migrate STM32F2 series `2096fd4652` samples: bluetooth: hci_uart: Fix wrongly converted board names `830f9c5a82` MAINTAINERS: Update Atmel entries `527cd9d8cd` CODEOWNERS: Update Atmel entries `83af7d0c1c` samples: atmel_sam: Update platform name `fd9b84d457` tests: atmel_sam: Update platform name `3c72fe863c` boards: arduino_due: Convert to HWMv2 `37dfacbf9e` boards: RoboKit1: Convert to HWMv2 `1108d7b0ed` boards: sam_v71_xult: Convert to HWMv2 `bed44a5c28` boards: sam_e70_xplained: Convert to HWMv2 `40448c5a9f` boards: sam4s_xplained: Convert to HWMv2 `31273692c0` boards: sam4l_ek: Convert to HWMv2 `35b5d33ef0` boards: sam4e_xpro: Convert to HWMv2 `3b84b9910a` soc: atmel: Port SAM family to HWMv2 `da00d0e7b9` boards: Convert nucleo_wba55cg to HWM v2 `fb2103f89e` boards: Convert nucleo_wba52cg to HWM v2 `1f9a533fbc` soc: st: stm32: Migrate STM32WBA series `3f92f65b28` boards: fix documentation for alientek and blues boards `7646b74aaf` boards: stm32l4: doc: add zephyr_file to defconfig path `fea54ddcd9` boards: Convert adi_eval_adin2111ebz to HWM v2 `d47f1878b1` boards: Convert adi_eval_adin1110ebz to HWM v2 `ae42be236b` boards: Convert swan_r5 to HWM v2 `83bd1a9ecc` boards: Convert stm32l4r9i_disco to HWM v2 `39c26f09ed` boards: Convert stm32l496g_disco to HWM v2 `29d03c970b` boards: Convert stm32l476g_disco to HWM v2 `74acec315c` boards: Convert sensortile_box to HWM v2 `fee6d8676e` boards: Convert pandora_stm32l475 to HWM v2 `008b5d9392` boards: Convert nucleo_l4r5zi to HWM v2 `24e357d623` boards: Convert nucleo_l4a6zg to HWM v2 `2c5f9dcce0` boards: Convert nucleo_l496zg to HWM v2 `4da061646f` boards: Convert nucleo_l476rg to HWM v2 `15956a69b8` tests: drivers: flash: stm32: update platform name `80324f7707` boards: Convert nucleo_l452re_p to HWM v2 `9893e0d111` boards: Convert nucleo_l452re to HWM v2 `46f92b227b` boards: Convert nucleo_l433rc_p to HWM v2 `ed5d1bb4cd` boards: Convert nucleo_l432kc to HWM v2 `325f95ec20` boards: Convert nucleo_l412rb_p to HWM v2 `d055676307` boards: Convert disco_l475_iot1 to HWM v2 `c7a415d92c` boards: Convert b_l4s5i_iot01a to HWM v2 `d15144f582` soc: st: stm32: Migrate STM32L4 series `a63ff71bcb` boards: nrf_bsim: Add new nrf5340 board definitions `b53c6f412c` boards: nrf_bsim: Remove redundant option setting `83eb4fc069` MAINTAINERS: intel_ish: Adjust to HWMv2 move `715685b19f` boards: x86: intel_ish: move and convert intel_ish boards to HWMv2 `5b9ef94106` soc: x86: intel_ish: move and convert to HWMv2 `12b297707a` boards: Convert stm32wb5mmg to HWM v2 `cdcea932bc` boards: Convert stm32wb5mm_dk to HWM v2 `0a3ae2b223` boards: Convert nucleo_wb55rg to HWM v2 `20b4ce17d5` soc: st: stm32: Migrate STM32WB series `47c65400d6` soc: st: stm32: fix stm32l0 family `59ec56f9e6` boards: Convert stm32h573i_dk to HWM v2 `dc5977dbba` boards: Convert nucleo_h563zi to HWM v2 `a6e4928543` soc: st: stm32: Migrate STM32H5 series `99f248e048` soc: stm32u5: Fix references after conversion to hw modelv2 `15f16834e6` boards: Convert stm32u5a9j_dk to HWM v2 `c1ee449ef1` boards: Convert sensortile_box_pro to HWM v2 `db4deddf9d` boards: Convert nucleo_u5a5zj_q to HWM v2 `2fd3ed43d2` boards: Convert nucleo_u575zi_q to HWM v2 `902fceb173` boards: Convert b_u585i_iot02a to HWM v2 `d716ca1a10` soc: st: Migrate stm32u5 series to new hw model `b7abc89428` hwmv2: boards: x86: doc: Adjust common docs to new locations `69b334f54b` MAINTAINERS: Change paths to native and nrfbsim boards `614611a528` boards: nrf_bsim: Convert to HW model v2 `5821b9ec2e` board: native_sim/posix: Convert to hwmv2 `04cbad174e` soc: native: Convert to HWMv2 `24ca0febfc` boards: nrf_bsim: Fix path to pinctrl_soc.h `9a32559a2d` cmake: FindHostTools: Fix for hwmv2 for host based targets `c4b11e0251` boards: longan_nano: port to HWMv2 `97edd05be3` boards: gd32vf103c_starter: port to HWMv2 `9cf624c410` boards: gd32vf103v_eval: port to HWMv2 `b40bf25e5e` soc: gd_gd32: reorganize folders `71600d7e95` soc: gd_gd32: move pinctrl_soc.h content back to soc folder `2bd84a1bc5` soc: gd_gd32: port gd32vf103 series to HWMv2 `9dc342143b` boards: doc: fix a bunch of broken reference `10392d693d` doc: boards: split out shields `b2def8ed3a` boards: acrn: fix title `bf7d3efe78` boards: riscv: tlsr9518adk80d: Convert to v2 `c579770e1d` soc: telink_tlsr: Port to HWMv2 `9131540109` soc: stm32h7: Couple of tests fixes following migration `2efcefc089` boards: Convert stm32h7b3i_dk to HWM v2 `d9b295a85b` boards: Convert stm32h750b_dk to HWM v2 `a2f56bdcd5` boards: Convert stm32h747i_disco to HWM v2 `00314155df` boards: Convert stm32h735g_disco to HWM v2 `b08819dff7` boards: Convert nucleo_h7a3zi_q to HWM v2 `56456c16e5` boards: Convert nucleo_h753zi to HWM v2 `91f9198dc4` boards: Convert nucleo_h745zi_q to HWM v2 `96f1bafbf9` boards: Convert nucleo_h743zi to HWM v2 `b290f25baa` boards: Convert nucleo_h723zg to HWM v2 `9fbe6bf191` boards: Convert fk7b0m1_vbt6 to HWM v2 `44bcfe57c7` boards: Convert arduino_portenta_h7 to HWM v2 `4c86af7eae` boards: Convert arduino_opta_m4 to HWM v2 `b4f852f738` boards: Convert arduino_giga_r1 to HWM v2 `bac9789264` soc: st: Migrate stm32h7 series to new hw model `a954e1722d` boards: stm32l0: Cleanup board _defconfig files after migration `7e8515b241` boards: Convert ronoth_lodev to HWM v2 `25246c21ef` boards: Convert nucleo_l073rz to HWM v2 `09396eb2e6` boards: Convert nucleo_l053r8 to HWM v2 `70c004fd83` boards: Convert nucleo_l031k6 to HWM v2 `e3daa98e79` boards: Convert nucleo_l011k4 to HWM v2 `a2de60c6da` boards: Convert dragino_nbsn95 to HWM v2 `e877ce9cec` boards: Convert dragino_lsn50 to HWM v2 `2b50218c23` boards: Convert b_l072z_lrwan1 to HWM v2 `4a65f55916` soc: st: Migrate stm32l0 series to new hw model `cc6e6be01f` boards: fix few leftover ITE board references `a837303268` soc: stm32: Protect Kconfig symbols by SOC_FAMILY_STM32 `88e5959f17` hwm2: Fix unit_testing: it is also a legacy board by now `95e06e8663` cmake: Fix uses of old SOC path `d517d3cc24` soc: set linker script for ra4m1 `68f9aeddab` soc: ite: add SOC_SERIES_ITE_IT8XXX2 guards around ITE options `ccf4f48f01` boards: convert ite boards to hwmv2 `4a6e286a3b` soc: convert ite_ec to hwmv2 `12e375f826` doc: handle arch / soc / board docs in new hardware model `b4db917de9` boards: Add documentation index files `d6e0d27efe` samples: bluetooth: hci_uart: Fix wrong named files `bc16a7a727` tests: Update board names for hwmv2 `2834883843` boards: riscv: rv32m1_vega: Convert to v2 `9c68231ba9` soc: openisa_rv32m1: Port to HWMv2 `986e9619fd` soc: starfive_jh71xx: Port to HWMv2 `e82932e787` boards: riscv: litex_vexriscv: Convert to v2 `cb9339f88f` soc: litex_vexriscv: Port to HWMv2 `1cd4c34654` boards: riscv: opentitan_earlgrey: Convert to v2 `92eadf06b8` soc: opentitan: Port to HWMv2 `a8659e170b` boards: riscv: titanium_ti60_f225: Convert to v2 `359133d725` soc: efinix_sapphire: Port to HWMv2 `6d466429ed` soc: soc_legacy: riscv: litex_vexriscv: Add updated paths `a1ff441eb3` boards: riscv: adp_xc7k_ae350: Convert to v2 `ef82a8255c` soc: ae350: Port to HWMv2 `282204758a` samples: boards: stm32: ccm: fix include path `8ca9341195` samples: basic: threads: fix broken reference `8a947f446d` boards: nrf52840dk: fix rst syntax `324cb41153` boards: nordic_nrf: fix broken references `963c74df1c` boards: intel_(ish\|adl\|ehl\|rpl), up_squared: fix include paths `8d518ce504` boards: legacy: drop empty folders `0fef0cef5b` boards: mps2: fix table formatting `e52ccc244f` boards: add HWMv2 board index `c7426eca5e` boards: arm: add legacy tag `1eba9d8a8f` boards: acrn: create vendor folder `8d92edc727` tests: kernel: Adjust qemu_x86_tiny_768 configuration HWMv2 `75117d1b2d` scripts: ensure posix path is used with --cmakeformat `0b0384b56a` maintainers: update paths after HWMv2 changes `c1b77b223d` boards: arm: pan1783: Convert to v2 `91a077b2ab` boards: posix: nrf_bsim: Update paths `413b6c2a40` cmake: modules: configuration_files: Add board identifier overlay file `4f572ba24f` treewide: Update board names for hwmv2 `cb348c7edf` boards: arm: nrf54l15pdk_nrf54l15: Convert to v2 `811ad90566` boards: arm: nrf54h20pdk_nrf54h20: Convert to v2 `d44ef90cf8` soc: nordic_nrf: Migrate nRF54H/nRF54L to v2 and fix nrf `c860f205de` boards: arm: nrf9151dk_nrf9151: Convert to v2 `fba98a1763` soc: nordic_nrf: Migrate nRF9151 to v2 `5c156a2d35` boards: arm: 96b_carbon_nrf51: Convert to v2 `cfc47a3a4b` boards: arm: nrf9161dk_nrf9161: Convert to v2 `37129b4e44` boards: arm: nrf9131ek_nrf9131: Convert to v2 `a923beba5d` boards: arm: bl5340_dvk: Convert to v2 `d242b2703b` boards: arm: raytac_mdbt53v_db_40_nrf5340: Convert to v2 `9c80d4e644` boards: arm: raytac_mdbt53_db_40: Convert to v2 `28268c4938` boards: arm: nrf5340_audio_dk_nrf5340: Convert to v2 `33ad2b5bc6` boards: arm: thingy53_nrf5340: Convert to v2 `40daa94f2d` boards: arm: nrf9160_innblue22: Convert to v2 `2b0dbb9d51` boards: arm: nrf9160_innblue21: Convert to v2 `ee6f7697ac` boards: arm: sparkfun_thing_plus_nrf9160: Convert to v2 `594e4bad6b` boards: arm: circuitdojo_feather_nrf9160: Convert to v2 `a5803ba099` boards: arm: actinius_icarus: Convert to v2 `db8c275456` boards: arm: actinius_icarus_bee: Convert to v2 `30177cf53d` boards: arm: actinius_icarus_som: Convert to v2 `486504cf24` boards: arm: actinius_icarus_som_dk: Convert to v2 `dd0672a64c` boards: arm: nrf9160dk_: Convert to v2 `c1565b3d14` boards: arm: xiao_ble: Convert to v2 `6dd2723314` boards: arm: qemu_cortex_m0: Convert to v2 `ee1ce24a42` boards: arm: bbc_microbit: Convert to v2 `1952d559f2` boards: arm: rm1xx_dvk: Convert to v2 `9e12c3d8bd` boards: arm: nrf51dongle_nrf51422: Convert to v2 `0ffbc1da33` boards: arm: nrf51_blenano: Convert to v2 `be52dfb7b6` boards: arm: nrf51_vbluno51: Convert to v2 `4c29d1827f` boards: arm: nrf51_ble400: Convert to v2 `5b4a9556fd` boards: arm: raytac_mdbt53_db_40_nrf5340: Fix typo `69e5d87a15` boards: arm: contextualelectronics_abc: Convert to v2 `5e4ace1bbe` boards: arm: degu_evk: Convert to v2 `2762460a64` boards: arm: pan1781_evb: Convert to v2 `fdc3913e76` boards: arm: ubx_evkninab1_nrf52832: Convert to v2 `9c9c3a09a1` boards: arm: holyiot_yj16019: Convert to v2 `109edc296f` boards: arm: blueclover_plt_demo_v2_nrf52832: Convert to v2 `7bfcdbbe8f` boards: arm: decawave_dwm1001_dev: Convert to v2 `0fbb543983` boards: arm: acn52832: Convert to v2 `073e0f8080` boards: arm: we_proteus2ev_nrf52832: Convert to v2 `197a19f396` boards: arm: ebyte_e73_tbb_nrf52832: Convert to v2 `1616fc8ae5` boards: arm: nrf52_vbluno52: Convert to v2 `5622077738` boards: arm: nrf52_sparkfun: Convert to v2 `a6289516e4` boards: arm: 96b_nitrogen: Convert to v2 `439d836883` boards: arm: nrf52_blenano2: Convert to v2 `16e65f09c4` boards: arm: arduino_nicla_sense_me: Convert to v2 `862efd5a21` boards: arm: thingy52_nrf52832: Convert to v2 `dede0f6cd3` boards: arm: nrf52_adafruit_feather: Convert to v2 `91e864ea29` boards: arm: nrf52832_mdk: Convert to v2 `47ec3e416b` boards: arm: ruuvi_ruuvitag: Convert to v2 `52f797a227` boards: arm: pinetime_devkit0: Convert to v2 `433db339f9` boards: arm: ubx_evkannab1_nrf52832: Convert to v2 `a646d3f2d5` boards: arm: ubx_bmd300eval_nrf52832: Convert to v2 `d0d434bf86` cmake: print identifier instead of variant `c3f5ed8157` boards: arm: we_proteus3ev_nrf52840: Convert to v2 `eecff8ee7a` boards: arm: nrf52840_mdk_usb_dongle: Convert to v2 `34507614f6` boards: arm: nrf52840_mdk: Convert to v2 `f02b56cb96` boards: arm: nrf52840_blip: Convert to v2 `600c55c92a` boards: arm: nrf52840_papyr: Convert to v2 `f294bfc5e4` boards: arm: reel_board: Convert to v2 `882524d2a0` boards: arm: nrf21540dk_nrf52840: Convert to v2 `4bce0e9b39` boards: arm: nrf52840dongle_nrf52840: Convert to v2 `d0229c771f` boards: arm: particle_argon: Convert to v2 `23a0570e64` boards: arm: particle_boron: Convert to v2 `b6d3e1764f` boards: arm: particle_xenon: Convert to v2 `499f3e7902` boards: arm: rak5010_nrf52840: Convert to v2 `9ae6b1804d` boards: arm: rak4631_nrf52840: Convert to v2 `fe2c90da5c` boards: arm: pinnacle_100_dvk: Convert to v2 `3d4d46698c` boards: arm: ubx_evkninab3_nrf52840: Convert to v2 `b1afbf0158` boards: arm: ubx_bmd380eval_nrf52840: Convert to v2 `9f9897c872` boards: arm: ubx_bmd345eval_nrf52840: Convert to v2 `f7fb2030c7` boards: arm: ubx_bmd340eval_nrf52840: Convert to v2 `7186432662` boards: arm: raytac_mdbt50q_db_40_nrf52840: Convert to v2 `32c4bdc0c4` boards: arm: pan1780_evb: Convert to v2 `7b64c638a8` boards: arm: pan1770_evb: Convert to v2 `156ee8ad8a` boards: arm: mg100: Convert to v2 `3d33dadeb0` boards: arm: arduino_nano_33_ble: Convert to v2 `4fee7371d2` boards: arm: adafruit_itsybitsy_nrf52840: Convert to v2 `ad37a0c222` boards: arm: adafruit_feather_nrf52840: Convert to v2 `cf85b7169f` boards: arm: bt510: Convert to v2 `44b67ac430` boards: arm: bt610: Convert to v2 `7dbb65d371` boards: arm: ubx_evkninab4_nrf52833: Convert to v2 `5e79cb957d` boards: arm: raytac_mdbt50q_db_33_nrf52833: Convert to v2 `12bd83a218` boards: arm: pan1782_evb: Convert to v2 `1a135ec352` boards: arm: bbc_microbit_v2: Convert to v2 `4dbe97e5ea` boards: arm: nrf52833dk: Convert to v2 `d632b90043` boards: arm: ubx_bmd360eval_nrf52811: Convert to v2 `cc1a30f24b` boards: arm: we_ophelia1ev_nrf52805: Convert to v2 `df0df9000b` boards: arm: ubx_bmd330eval_nrf52810: Convert to v2 `d2c7972a9a` boards: arm: nrf52dk: Convert to v2 `202c2bf447` boards: arm: bl654_sensor_board: Convert to v2 `c3e36f2042` boards: arm: bl654_usb: Convert to v2 `b9dd58aea1` boards: arm: bl654_dvk: Convert to v2 `0e1898b093` boards: arm: bl653_dvk: Convert to v2 `286f4a7524` boards: arm: bl652_dvk: Convert to v2 `d1709cdb37` boards: update nRF51dk board to board scheme v2. `8f040cff2c` boards: Update nrf5340dk_nrf5340 to HWMv2 scheme `8c90fae8e0` boards: update nRF52840dk_nrf52840/nrf52811 board to board scheme v2. `c828dcc60e` boards: common: openocd-nrf5: Add HWMv2 support `c79f1b0d94` kconfig: soc: adopt Nordic SoC series to support hw model v2 scheme `3584b30fc1` tests: Update board names for hwmv2 `94024d940e` boards: arm: arty_a7: Convert to v2 `8053c3a8df` boards: arm: scobc_module1: Convert to v2 `d5473b76fe` soc: designstart: Port to HWMv2 `f5792b05e7` boards: arm: fvp_baser_aemv8r_aarch32: Convert to v2 `ff202daa8e` soc: fvp_aemv8r_aarch32: Port to HWMv2 `e66cbc2945` boards: arm: v2m_musca_s1: Convert to v2 `33b47b2edb` boards: arm: v2m_musca_b1: Convert to v2 `baeebd31d2` soc: musca: Port to HWMv2 `73b257a3f9` boards: arm: v2m_beetle: Convert to v2 `85de0888ec` soc: beetle: Port to HWMv2 `867960a891` manifest: Update modules `6ca677ed3a` boards: arm: mps2: Convert to v2 `bcf4ad19d4` twister: build_dir: convert / to _ to support hwmv2 `0ac386683f` soc: Kconfig.v2: Add SOC_PART_NUMBER `9242c3c78f` soc: stm32: soc.yml: reorder series `248d17f160` boards: stm32: cleanup `0a67265e99` boards: stm32: fix for boards with revisions `f8d44317ee` soc: stm32l5: Rename overlays for nucleo_l552ze_q ns target. `400343d17e` soc: stm32: Set default on USE_DT_CODE_PARTITION `d783ef549a` soc: stm32l5: Update stm32l5 non secure targets in various places `643aeac552` boards: Convert stm32l562e_dk to HWM v2 `e601d64344` boards: Convert nucleo_l552ze_q to HWM v2 `2f7a387b32` soc: st: Migrate stm32l5 series to new hw model `519752efcd` boards: xenvm: doc: Remove reference to deleted file `06263dd717` boards: xenvm: Unset HEAP_MEM_POOL_SIZE in gicv3 variant `66b0df5526` boards: qemu_cortex_a53: Fix Kconfig warnings in SMP variant `fa07bd9419` boards: mps3: Fix non-secure variant `8f6f0726dd` boards: Move xenvm under xen `7b155a7031` boards: Raspberry Pi vendor fix `804697afa5` boards: Move 96b_aerocore to 96boards `d2f001e320` boards: x86: acrn: move and convert to HWMv2 `ec7f7b3c30` tests: kernel: qemu_x86: adjust to the HWMv2 `89dfcddc7e` boards: x86: qemu_x86_tiny@768: change to board variant `eb724eb6a7` boards: x86: qemu_x86: optimize default HWMv2 configurations `6f1043cde6` boards: x86: qemu_x86: move and convert to HWMv2 `cab924cbfb` soc: x86: ia32: move and convert to HWMv2 `237fdff918` soc: x86: lakemont: move and convert to HWMv2 `03042b7704` boards: move 96b_carbon to 96boards folder `767b94414e` boards: rename vendor seeed to seeed_studio `07fa3a3d79` boards: Convert olimex_lora_stm32wl_devkit to HWM v2 `ba01d3beca` boards: Convert nucleo_wl55jc to HWM v2 `7ce84f4041` boards: Convert lora_e5_mini to HWM v2 `b988bae576` boards: Convert lora_e5_dev_board to HWM v2 `6fbf39c726` soc: v2: stm32: Migrate STM32WL series `4a41878442` soc: st: stm32g4: add missing include `1e79ba15f6` boards: Convert weact_stm32g431_core to HWM v2 `ffdcb60185` boards: Convert nucleo_g474re to HWM v2 `d6acb08d3e` boards: Convert nucleo_g431rb to HWM v2 `90e592ffd1` boards: Convert b_g474e_dpow1 to HWM v2 `eb8a7e3441` soc: st: stm32: Migrate STM32G4 series `ada469f237` tests: Update board names for hwmv2 `0342433187` boards: arm: npcx9m6f_evb: Convert to v2 `c10248d964` boards: arm: npcx7m6fb_evb: Convert to v2 `21ddc5e6a6` boards: arm: npcx4m8f_evb: Convert to v2 `5500f3ef21` soc: npcx: Port to HWMv2 `e7baf09ede` soc: m48x: Port to HWMv2 `5bae4a6480` boards: arm: numaker_pfm_m467: Convert to v2 `3b0bd70c8c` soc: m46x: Port to HWMv2 `d52eab9e83` boards: Convert stm32g081b_eval to HWM v2 `6f2835cb11` boards: Convert stm32g071b_disco to HWM v2 `ca36d331d2` boards: Convert stm32g0316_disco to HWM v2 `662cc4e09b` boards: Convert nucleo_g0b1re to HWM v2 `dd9bc29769` boards: Convert nucleo_g071rb to HWM v2 `353da23ffb` boards: Convert nucleo_g070rb to HWM v2 `acc932b424` boards: Convert nucleo_g031k8 to HWM v2 `cea9b140fd` boards: Convert google_twinkie_v2 to HWM v2 `52e025943a` soc: st: stm32: Migrate STM32G0 series `1c7347686a` ci: update check_compliance to not create duplicate lines in Kconfig `9debd98799` hwmv2: boards: up_squared_pro_700: Add missed intel_adl changes `adab07c42f` boards: Convert msp_exp432p401r_launchxl to HWM v2 `642aacdcdf` soc: ti_simplelink: Add missing SoC `48637066d3` boards: Fix file paths in documentation `e983bc2a23` samples/tests: Fix mps3 board name `61e0f32716` boards: Convert stm32f3_seco_d23 to HWM v2 `a1688ff641` boards: Convert stm32f3_disco to HWM v2 `35fb228599` boards: Convert stm32373c_eval to HWM v2 `10e5d1122b` boards: Convert nucleo_f334r8 to HWM v2 `c319cb19f0` boards: Convert nucleo_f303re to HWM v2 `11725ccac1` boards: Convert nucleo_f303k8 to HWM v2 `400f7f6a4f` boards: Convert nucleo_f302r8 to HWM v2 `8d84861390` soc: v2: stm32: Migrate STM32F3 series `85b9eee7e8` boards: arm: kv260_r5: Convert to v2 `dafbd638e4` boards: arm: mercury_xu: Convert to v2 `3ecd12f415` boards: arm: qemu_cortex_r5: Convert to v2 `5db2390e9d` soc: xilinx_zyncmp: Port to HWMv2 `9ba8195cdc` boards: arm: qemu_cortex_a9: Convert to v2 `8e94b85361` boards: arm: zybo: Convert to v2 `c970127fc2` soc: xilinx_zynq7000: Port to HWMv2 `394c75373c` boards: arm: ast1030_evb: Convert to v2 `f2a1cc8714` soc: ast10x0: Port to HWMv2 `28f3f25945` boards: arm: cc3235sf_launchxl: Convert to v2 `c3e480f740` boards: arm: cc3220sf_launchxl: Convert to v2 `fd5847123f` boards: arm: beagleconnect_freedom: Convert to v2 `76ba9a0587` boards: arm: cc1352p1_launchxl: Convert to v2 `719baa8850` boards: arm: cc1352r1_launchxl: Convert to v2 `5060a61ae1` boards: arm: cc1352r_sensortag: Convert to v2 `99584be1c5` boards: arm: cc26x2r1_launchxl: Convert to v2 `2dc8933942` soc: ti_simplelink: Port to HWMv2 `a5b004663b` scripts/utils/board_v1_to_v2.py: couple of fixes `77c2c333e5` boards: move 96b_stm32_sensor_mez to 96boards `c14ff98650` boards: stm32f411e_disco: delete obsolete file `bcdc268ccf` boards: Convert stm32mp157c_dk2 to HWM v2 `0c8ba92e1f` boards: Convert 96b_avenger96 to HWM v2 `b54fe33077` soc: v2: stm32: Migrate STM32MP1 series `2ba3639b2a` boards: Convert nucleo_c031c6 to HWM v2 `dbc5ed79f5` soc: st: stm32: Migrate STM32C0 series `ce6d493aa3` boards: Convert stm32l1_disco to HWM v2 `a28086a9ca` boards: Convert nucleo_l152re to HWM v2 `1b2a511d06` boards: Convert 96b_wistrio to HWM v2 `ce281f09ab` soc: v2: stm32: Migrate STM32L1 series `cdb5364fd7` boards: Convert stm32f769i_disco to HWM v2 `768f173dcb` boards: Convert stm32f7508_dk to HWM v2 `21bbbbd9cb` boards: Convert stm32f746g_disco to HWM v2 `bab4265693` boards: Convert stm32f723e_disco to HWM v2 `58f8fe82ba` boards: Convert nucleo_f767zi to HWM v2 `37e9084070` boards: Convert nucleo_f756zg to HWM v2 `d467e7053a` boards: Convert nucleo_f746zg to HWM v2 `5f2808d7cc` boards: Convert nucleo_f722ze to HWM v2 `bbb73e7550` soc: st: Migrate stm32f7 series to new hw model `e9094afc4d` soc: st: stm32: stm32f4: change SOC_STM32F405XG to SOC_STM32F405XX `a1712cdd53` boards: Convert stm32f4_disco to HWM v2 `5be404b365` boards: Convert stm32f469i_disco to HWM v2 `baaa697ab2` boards: Convert stm32f429i_disc1 to HWM v2 `69ecab3c90` boards: Convert stm32f412g_disco to HWM v2 `2a572e3fb0` boards: Convert stm32f411e_disco to HWM v2 `ecfbf42757` boards: Convert stm32f401_mini to HWM v2 `e0191d03bb` boards: Convert steval_fcu001v1 to HWM v2 `4454648976` boards: Convert segger_trb_stm32f407 to HWM v2 `f0ad6ee6b8` boards: Convert olimex_stm32_p405 to HWM v2 `1f5e228ec8` boards: Convert olimex_stm32_h407 to HWM v2 `834bdb615e` boards: Convert olimex_stm32_h405 to HWM v2 `8f27fa8de2` boards: Convert olimex_stm32_e407 to HWM v2 `f8633a9038` boards: Convert nucleo_f446ze to HWM v2 `07e0bd2c07` boards: Convert nucleo_f446re to HWM v2 `24d7f625dc` boards: Convert nucleo_f429zi to HWM v2 `157a8cde53` boards: Convert nucleo_f413zh to HWM v2 `4ec99c31b0` boards: Convert nucleo_f412zg to HWM v2 `a21546140a` boards: Convert nucleo_f411re to HWM v2 `43f01ab6de` boards: Convert nucleo_f410rb to HWM v2 `60c16bcb8b` boards: Convert nucleo_f401re to HWM v2 `2db228d730` boards: Convert mikroe_mini_m4_for_stm32 to HWM v2 `73fc26225c` boards: Convert mikroe_clicker_2 to HWM v2 `6b62d90114` boards: Convert google_dragonclaw to HWM v2 `fa845af309` boards: Convert blackpill_f411ce to HWM v2 `5c8c3c3be0` boards: Convert blackpill_f401ce to HWM v2 `3c02db1290` boards: Convert blackpill_f401cc to HWM v2 `7eeb723cb7` boards: Convert black_f407zg_pro to HWM v2 `4f9461d068` boards: Convert black_f407ve to HWM v2 `a821de8532` boards: Convert az3166_iotdevkit to HWM v2 `ba580c7236` boards: Convert adi_sdp_k1 to HWM v2 `eb272ddf19` boards: Convert adafruit_feather_stm32f405 to HWM v2 `58ed121c3a` boards: Convert 96b_stm32_sensor_mez to HWM v2 `b0d70959d3` boards: Convert 96b_neonkey to HWM v2 `b1088baadc` boards: Convert 96b_carbon to HWM v2 `18d867b0a9` boards: Convert 96b_argonkey to HWM v2 `ee6ede7119` boards: Convert 96b_aerocore2 to HWM v2 `b48e70ead9` soc: v2: stm32: Migrate STM32F4 series `14d2b955da` cmake: convert path to CMake style before writing Kconfig files `9c4ac6a202` boards: posix: bsim: Update paths `14b57f56d7` tests: drivers: gpio: gpio_ite_it8xxx2_v2: Temp fix `f3b173be18` scripts: board_v1_to_v2: Update following move to boards_legacy `05b50f6691` cmake: CMake soc dir variable improvements for HWMv2 `a188e01a12` hwmv2: move all ported boards and socs to their final location `22c53e97b5` hwmv2: move all non-ported legacy boards and socs to legacy folders `53f3b181b0` soc: ti_k3: Port to HWMv2 `9f19a2075a` soc: rk3568: Port to HWMv2 `b8928b1628` soc: rk3399: Port to HWMv2 `cda3a74868` boards: arm64: qemu_kvm_arm64: Convert to v2 `70d704bd20` soc: x86: atom: move and convert to HWMv2 `4789e1068e` boards: x86: intel_rpl: move and convert raptor_lake boards to HWMv2 `384307e3dc` soc: x86: raptor_lake: move and convert to HWMv2 `ed025df674` boards: x86: intel_ehl: move and convert elkhart_lake boards to HWMv2 `994b6e1731` soc: x86: elkhart_lake: move and convert to HWMv2 `73b30a04cf` boards: x86: up_squared_pro_7000: move and convert to HWMv2 `83b133c207` boards: x86: intel_adl: move and convert alder_lake boards to HWMv2 `847a12f1e4` soc: alder_lake: move and convert to HWMv2 `67f4c8d2a1` samples: up_squared: adjust gpio_counter to HWMv2 `5326b5bfc0` boards: x86: up_squared: move and convert to HWMv2 `cfd5e691b4` soc: apollo_lake: move and convert to HWMv2 `ac9c235741` boards: xtensa: qemu_xtensa: Convert to v2 `f198c3a761` ci: update to osource for soc/Kconfig.defconfig files `e438e6cad4` ci: add SOC_SERIES_ as false positive in check_compliance.py `95e34da7c1` soc: v2: Convert st_stm32 to st/stm32 `313717df76` soc: mps3: Fix missing family `392c3969ed` boards: arm: am62x_m4: Convert to v2 `8f245d764d` tests: Update board names for hwmv2 `8f71bb7b4f` boards: arm64: khadas_edgev: Convert to v2 `e27d23aad0` soc: rk3399: Port to HWMv2 `80823b860e` boards: arm64: roc_rk3568_pc: Convert to v2 `72e4483dec` soc: rk3568: Port to HWMv2 `bed94669e3` boards: arm64: phycore_am62x_a53: Convert to v2 `c01af5a7b8` soc: ti_k3: Port to HWMv2 `1e563b4ca3` boards: arm64: xenvm: Convert to v2 `76e484adae` soc: xenvm: Port to HWMv2 `34412f7fe2` boards: arm64: rpi_4b: Convert to v2 `9be50e2ca9` soc: bcm2711: Port to HWMv2 `bbbed12c2f` boards: arm64: qemu_kvm_arm64: Convert to v2 `4f5ec7ff8f` soc: qemu_virt_arm64: Port to HWMv2 `d8d1b9f200` boards: arm64: qemu_cortex_a53: Convert to v2 `30bd34b31e` soc: qemu_cortex_a53: Port to HWMv2 `c20d0dcbb6` boards: arm64: fvp_baser_aemv8r: Convert to v2 `02ed6af463` boards: arm64: fvp_base_revc_2xaemv8a: Convert to v2 `1b175003a4` soc: fvp_aemv8*: Port to HWMv2 `de231b911d` boards: v2: Clean up obsolete comments `aa9597f6d9` boards: Convert waveshare_open103z to HWM v2 `9644828c81` boards: Convert stm32vl_disco to HWM v2 `86ab2bd430` boards: Convert stm32_min_dev to HWM v2 `d88d3ddcc4` boards: Convert stm32f103_mini to HWM v2 `0ccc0204e1` boards: Convert stm3210c_eval to HWM v2 `dd9972d782` boards: Convert olimex_stm32_h103 to HWM v2 `a2c2e1406d` boards: Convert olimexino_stm32 to HWM v2 `2d9c62e118` boards: Convert nucleo_f103rb to HWM v2 `e8ba99dc59` soc: v2: stm32: Migrate STM32F1 series `9a93916604` tests: Update board names for hwmv2 `9c4d94844d` boards: arm: bcm958401m2: Convert to v2 `feaf4ffba1` boards: arm: bcm958402m2: Convert to v2 `87f0827121` soc: bcm_vk: Port to HWMv2 `4526be24a5` boards: arm: quick_feather: Convert to v2 `cd921d2b97` boards: arm: qomu: Convert to v2 `b3c04051fc` soc: quicklogic_eos_s3: Port to HWMv2 `a73a9e7533` boards: v2: Clean up obsolete comments `8d87bcc167` boards: Convert stm32f0_disco to HWM v2 `1933585785` boards: Convert stm32f072_eval to HWM v2 `6f9fe5429d` boards: Convert stm32f072b_disco to HWM v2 `9dc78e4025` boards: Convert stm32f030_demo to HWM v2 `35113e8923` boards: Convert nucleo_f091rc to HWM v2 `b276aee9a4` boards: Convert nucleo_f070rb to HWM v2 `795f8d611b` boards: Convert nucleo_f042k6 to HWM v2 `2d82646443` boards: Convert nucleo_f031k6 to HWM v2 `959786f12d` boards: Convert nucleo_f030r8 to HWM v2 `81670db2e9` boards: Convert legend to HWM v2 `8980430aad` boards: Convert google_kukui to HWM v2 `ac020f66e0` dts: stm32f0: fix few warnings `5140e4551a` boards: v2: doc: Add vendors `77d640e0c9` soc: v2: stm32: Migrate STM32F0 series `0131e1c159` soc: v2: Add st_stm32 structure and common folder `36b63787a7` boards: v2: Add documentation index for converted boards `ae02fc5047` boards: sparc: qemu_leon3: Convert to v2 `f38f7bb223` boards: sparc: gr716a: Convert to v2 `d3cca3580e` soc: gr716a: Port to HWMv2 `6a8a0c1647` boards: sparc: generic_leon3: Convert to v2 `faf22185ce` soc: leon3: Port to HWMv2 `e94762ecdc` tests: Update board names for hwmv2 `9afcc27e05` boards: xtensa: qemu_xtensa: Convert to v2 `3e4a17018f` soc: dc233c: Port to HWMv2 `9188fdcd78` boards: xtensa: xt-sim: Convert to v2 `fcaa41cb5d` soc: xtensa_sample_controller: Port to HWMv2 `dbc413f7f7` scripts: board_v1_to_v2: Fix CONFIG_SOC_SERIES_ exclusion `6be3d4bc80` kconfig: remove Kconfig BOARD_RPI_PICO_W safe guard. `f4442fa698` boards: v2: Add documentation index for converted boards `ec5fbd67f7` boards: nios2: qemu_nios2: Convert to v2 `d3ef220460` soc: nios2-qemu: Port to HWMv2 `a223f284b5` boards: nios2: altera_max10: Convert to v2 `c381edcb73` soc: nios2f-zephyr: Port to HWMv2 `97401c7d2a` boards: mips: qemu_malta: Convert to v2 `e7a3243a24` soc: qemu_malta: Port to HWMv2 `bec82c690d` boards: v2: Add documentation index for converted boards `94f6f9b636` boards: arm: w5500_evb_pico: Convert to v2 `209235ab6e` boards: arm: sparkfun_pro_micro_rp2040: Convert to v2 `e5b1885907` boards: arm: adafruit_qt_py_rp2040: Convert to v2 `4c750818f9` boards: arm: adafruit_kb2040: Convert to v2 `8d3896caa4` boards: arm: rpi_pico: Convert to v2 `42cff42c42` soc: rpi_pico: Port to HWMv2 `c2df4ca9cb` scripts: improve yaml schema and board.yml validation for revisions `3970f90f71` cmake: clear BOARD_CACHE when invalid board identifier is given `3a70ee9ccd` cmake: improve board revision handling `3cda715fae` scripts: board_v1_to_v2: Don't add select CONFIG_SOC_SERIES_FOO `dc56a543f3` scripts: board_v1_to_v2: Add License + copyright `87147f88c4` cmake: prefer cache BOARD_IDENTIFIER over extracting from BOARD `65f5dc5b8c` cmake: fail when board identifier is applied in legacy hw model `7db2b6efd8` cmake: cache BOARD_IDENTIFIER to preserve it between CMake invocations `85dddac5a2` scripts: using extend in list_boards for variant list `6ae5c4e7fd` scripts: utils: add board v1->v2 conversion utility `ef834a12d0` maintainers: update Renesas RZT2M path `3ab7830625` boards: renesas: add documentation entry `a0c2ca0491` boards: arm: add documentation entry `27ff3654b7` boards: gigadevice: add documentation entry `6e02f43c0a` maintainers: update GD32 paths `1bfcf1d974` boards: gd32l233r_eval: convert to HWMv2 `6e621ee43f` boards: gd32f470i_eval: convert to HWMv2 `219b149768` boards: gd32f450z_eval: convert to HWMv2 `91c52b0d39` boards: gd32f450v_start: convert to HWMv2 `f0e0a973f6` boards: gd32f407v_start: convert to HWMv2 `6f592b64c9` boards: gd32f403z_eval: convert to HWMv2 `4bcb4b2ac8` boards: gd32f350r_eval: convert to HWMv2 `fdc7ed6eb0` boards: gd32e507z_eval: convert to HWMv2 `770376250d` boards: gd32e507v_start: convert to HWMv2 `a6d8b92e86` boards: gd32e103v_eval: convert to HWMv2 `a5f8e5daa1` boards: gd32a503v_eval: convert to HWMv2 `5ee799cc5f` boards: gd32f450i_eval: convert to HWMv2 `8aa8ce4ac8` soc: gigadevice: port to HWMv2 `4e203c14c7` cmake: enhanced board entry file handling `312265ee04` scripts: make SoC field mandatory in board.yml `c12ae3bcbc` boards: update Renesas rzt2m board.yml to contain SoC information `c5321c1dbe` cmake: make SoC optional for boards containing a single SoC `bcc06c60ae` scripts: support SoC list output for boards `db9e46010c` twister: update testcase.yaml and sample.yaml to mps3/an547 identifier `a988adee7d` boards: update arm mps3 an547 board to HWMv2 scheme `7dc2c9db0c` soc: use HWMv2 for arm mps3 SoC `c506675b7c` boards: update Renesas Starter Kit+ for RZ/T2M board to HWMv2 scheme `3abb792073` soc: use HWMv2 for renesas_rzt2m SoC `4f52bc646e` cmake: support hw model v2 in arch/Kconfig tree `a712b5005b` scripts: extend kconfig compliance to verify board / SoC scheme v2 `baa55141a1` twister: update twister testplan.py to handle HWMv2 boards `1f026f70eb` boards: extend list_boards.py and update boards CMake module `bd854a3af8` cmake: introduce arch and soc cmake modules for hw model v2 `c9edefa8fd` arch: add existing archs to archs.yml for HWMv2 support `61bbfb5ba2` scripts: introduce list_hardware.py for listing of architectures and SoCs `a4d1980c35` build: board/ soc: introduce hw model v2 scheme Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com> Signed-off-by: Declan Snyder <declan.snyder@nxp.com> Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com> Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com> Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no> Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com> Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com> Signed-off-by: David Leach <david.leach@nxp.com> Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com> Signed-off-by: Anas Nashif <anas.nashif@intel.com> Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com> Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com> Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no> Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com> Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com> Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com> Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com> Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no> Signed-off-by: Francois Ramu <francois.ramu@st.com> Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com> Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com> Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com> Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>	1 year ago
Magdalena Pastula	d8203d2e1f	tests: drivers: add overlay files for nRF54L15 Add nRF54L15 overlay files for driver tests that need them. Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>	1 year ago
Krzysztof Chruściński	2ebf83176c	tests: drivers: uart: uart_pm: Use legacy nrf driver New nrf uart shim requires addiotional work around PM. Use legacy version for those tests until it is fixed. Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>	1 year ago
Alberto Escolar Piedras	cee40d1d49	tests/drivers/uart/uart*: Allow on nrf52_bsim Add the nrf52_bsim to the platform_allow list for tests which had such a filter. Note that for this test to pass, you need to connect the uart in loopback, passing the command line option `-uart0_loopback` to zephyr.exe Note this tests do not run right now by default in CI as the fixture is preventing it. They can be run with: twister -T tests/drivers/uart/ -v -p nrf52_bsim \ --fixture gpio_loopback -- -uart0_loopback Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>	2 years ago
Alberto Escolar Piedras	7ef23e1573	tests uart/uart_pm: Fix kconfig warning The option CONFIG_NATIVE_UART_0_ON_STDINOUT is only usable for the native_sim/posix(_64) targets, but this test is only allowed for the nrf52840dk_nrf52840. Building with this option set causes a kconfig warning. Let's just remove it. Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>	2 years ago
Alberto Escolar Piedras	51f9af86e4	tests/drivers uart_pm: Fix for too fast targets On the async configurations, the first part of the test (test_uart_pm_in_idle) can interfere with the second part of the test, if the device has a fast enough CPU. This is due to the first part of the test ending as soon as it queues the last byte for transmission. If the device is fast enough (and the simulated nrf52 is), the 2nd part of the test will start executing enabling the UART Rx, which can result in either the Rx being enabled mid frame, which can result in a frame error or even before the Tx HW started pushing the byte in the line (resulting in that byte being received). Neither of these cases are handled by the 2nd test, which sees a spurious error or received byte and fails. Let's just add a small delay at the end of the first test to allow the Tx of the last byte to be done. Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>	2 years ago
Alberto Escolar Piedras	892e8ef47a	tests/drivers uart_async_*: Provide overlays for nrf52_bsim For uart_async_api, uart_mix_fifo_poll & uart_pm: These test can be run fine in the simulated nrf52_bsim board, just connecting the UART Tx and Rx in loopback, but we need an overlay just like for the real boards. Let's provide it. Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>	2 years ago
Anas Nashif	345735d0a8	tests: remove CONFIG_ZTEST_NEW_API in all tests Remove all usage of CONFIG_ZTEST_NEW_API from tests and sample as this is now enabled by default. Signed-off-by: Anas Nashif <anas.nashif@intel.com>	2 years ago
Daniel Leung	121b4d2d62	tests: drivers: rename shadow variables Renames shadow variables found by -Wshadow. Signed-off-by: Daniel Leung <daniel.leung@intel.com>	2 years ago
Gerard Marull-Paretas	93b63df762	samples, tests: convert string-based twister lists to YAML lists Twister now supports using YAML lists for all fields that were written as space-separated lists. Used twister_to_list.py script. Some artifacts on string length are due to how ruamel dumps content. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>	2 years ago
Andrzej Głąbek	8cba27aab3	tests: drivers: uart_pm: Fix testing of no-RX case Instead of checking the `rx-pin` property that got deprecated and removed, the test needs to check the `disable-rx` property. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>	2 years ago
Andrzej Głąbek	2cbe097b29	tests: drivers: uart: Use "dut" node label to select UART to be tested ... to limit #if chains in these tests and make it easier to add new boards. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>	2 years ago
Katarzyna Giądła	0a16558289	tests: drivers: uart: uart_pm: Unify set of pins on nrf52840dk_nrf52840 Unify set of the pins on `nrf52840dk_nrf52840`, which is used by `gpio_loopback` fixture. Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>	2 years ago
Katarzyna Giądła	58c924ec56	tests: drivers: uart: Add GPIO dependency to tests Add gpio dependency to the tests, which require fixture `gpio_loopback`. Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>	3 years ago
Anas Nashif	ba7d730e9b	tests/samples: use integration_plaforms in more tests/samples integration_platforms help us control what get built/executed in CI and for each PR submitted. They do not filter out platforms, instead they just minimize the amount of builds/testing for a particular tests/sample. Tests still run on all supported platforms when not in integration mode. Signed-off-by: Anas Nashif <anas.nashif@intel.com>	3 years ago
Anas Nashif	67e8d03280	tests/samples: fix some missing tags Many driver samples or tests only had 'drivers' as the tag, without a tag indicating what driver that is exactly, so add some missing tags. Signed-off-by: Anas Nashif <anas.nashif@intel.com>	3 years ago
Michał Barnaś	dae8efa692	ztest: remove the obsolete NULL appended to zassert macros This commit removes the usage of NULL parameter as message in zassert_* macros after making it optional Signed-off-by: Michał Barnaś <mb@semihalf.com>	3 years ago
Enjia Mai	4ec2258f06	tests: drivers: uart: move the uart PM tests to new ztest API Migrate the testsuite tests/drivers/uart/uart_pm to the new ztest API. Signed-off-by: Enjia Mai <enjia.mai@intel.com>	3 years ago
Fabio Baltieri	def230187b	test: fix more legacy #include paths Add a bunch of missing "zephyr/" prefixes to #include statements in various test and test framework files. Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>	3 years ago
Kumar Gala	02804f509c	tests: uart_pm: Convert test to use DEVICE_DT_GET Move to use DEVICE_DT_GET instead of device_get_binding as we work on phasing out use of DTS 'label' property. Signed-off-by: Kumar Gala <galak@kernel.org>	3 years ago
Gerard Marull-Paretas	ade7ccb918	tests: migrate includes to <zephyr/...> In order to bring consistency in-tree, migrate all tests to the new prefix <zephyr/...>. Note that the conversion has been scripted, refer to #45388 for more details. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>	3 years ago
Katarzyna Giadla	681e3a16c7	tests: Change duplicated names of the test cases Some names of the test cases are duplicated within the project. This commit contains the proposed names of the test scenarios. Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>	3 years ago
Gerard Marull-Paretas	31f0610edc	tests: drivers: uart: use pinctrl for nrf board overlay nRF boards now require usage of pinctrl, migrate them. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>	3 years ago
Flavio Ceolin	6451626ce7	pm: Use pm_device_action_run instead of state_set Since drivers implement a callback based on action and not the state, we should be using the API based on the action instead of the one based on the state. Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>	4 years ago
Krzysztof Chruscinski	c590b3545a	drivers: serial: Use microseconds to represent timeout Updated uart_rx_enable() and uart_tx() to use timeout given in microseconds. Previously argument was given in milliseconds. However, there are cases when milliseconds granularity is not enough and can significantly reduce a throughput, e.g. 1ms is 100 bytes at 1Mb. Updated 4 drivers which implement asynchronous API. Updated places where API was used. Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>	4 years ago
Torsten Rasmussen	1cccc8a8fe	cmake: increase minimal required version to 3.20.0 Move to CMake 3.20.0. At the Toolchain WG it was decided to move to CMake 3.20.0. The main reason for increasing CMake version is better toolchain support. Better toolchain support is added in the following CMake versions: - armclang, CMake 3.15 - Intel oneAPI, CMake 3.20 - IAR, CMake 3.15 and 3.20 Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>	4 years ago
Gerard Marull-Paretas	d41dadc569	pm: rename PM_DEVICE_STATE_SUSPEND to PM_DEVICE_STATE_SUSPENDED The verb tense for the suspended state was not consistent with other states. The likely reason: state was being used as a command/action. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>	4 years ago
Gerard Marull-Paretas	56a35e5682	pm: converge to suspend state for low power modes The difference between low power and suspend states is a thin blur line that is is not clear and most drivers have used indistinctly. This patch converges to the usage of the suspend state for low power, since contrary to the low power state, it is used by both system and runtime device PM. The low power state is still kept, but its future is unclear and needs some discussion. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>	4 years ago
Gerard Marull-Paretas	26ad8376bd	pm: remove callback from control function The callback is not used anymore, so just delete it from the pm_control callback signature. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>	4 years ago
Gerard Marull-Paretas	cc2f0e9c08	pm: use enum for device PM states Move all PM_DEVICE_STATE_* definitions to an enum. The PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept out of the enum since they do not represent any state. However, their name has not been changed since they will be removed soon. All drivers and tests have been adjusted accordingly. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>	4 years ago
Krzysztof Chruscinski	eb949d01d3	tests: drivers: uart: Add test for uart power management Added test which validates that uart device correctly handles going to and from low power state. Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>	4 years ago

49 Commits (061036f9e352bf96e4808ab1cb209aac2747dafd)