zephyr

Commit Graph

Author	SHA1	Message	Date
Shaunak saha	05d1c3a7f0	boards: mps4: Add initial support for corstone315 What is changed? - Add initial support for the MPS4 Corstone-315 FVP platform, including board and SoC definitions.The qualifier to build/run application with board mps4/corstone315 is `mps4/corstone315/fvp` for secure and `mps3/corstone315/fvp/ns` for non-secure. - FVP testing with corstone315 uses the ARM FVP `FVP_Corstone_SSE-315`. Why do we need this change? - This enables FVP support for corstone315. - A separate FVP variant was added for corstone315 as the TFM board used for non-secure variant differs for FPGA and FVP. TFM board `arm/mps4/corstone315` support is present but no FVP support yet. We can test this by building TF-M with -DTFM_PLATFORM=arm/mps4/corstone315 and then lauching FVP: FVP_Corstone_SSE-315 --data "bl1_1.bin"@0x11000000 --data "cm_provisioning_bundle.bin"@0x12024000 --data "dm_provisioning_bundle.bin"@0x1202aa00 --data "bl2_signed.bin"@0x12031400 --data "tfm_s_ns_signed.bin"@0x38000000 Signed-off-by: Shaunak saha <ssaha@tsavoritesi.com>	2 weeks ago
Sudan Landge	5a3c4941a2	pinctrl: add support for mps4 Add MPS4 pinctrl support by referring to `mps4/common/partition/platform_base_address.h` from TF-M's main branch. Signed-off-by: Sudan Landge <sudan.landge@arm.com>	4 weeks ago
Sudan Landge	d1e830fe0d	boards: arm: add support for MPS4 Corstone-320 Add initial support for the MPS4 Corstone-320 platform, including board and SoC definitions. This platform features a Cortex-M85 CPU with an Ethos-U85 NPU and runs in simulation using the FVP_Corstone_SSE-320 Fixed Virtual Platform. Signed-off-by: Sudan Landge <sudan.landge@arm.com>	4 weeks ago
Sudan Landge	8c02ffc6dd	arch: arm: enable pxn support at arch level Move PXN support selection to arch so that it is enabled for all Armv8.1-m socs. Signed-off-by: Sudan Landge <sudan.landge@arm.com>	2 months ago
Samuel Chee	7e95006abf	drivers: pinctrl: add pinctrl drivers for arm v2m_beetle Adds pinctrl driver for the v2m_beetle board target. Signed-off-by: Samuel Chee <samche01@arm.com> Signed-off-by: Sudan Landge <sudan.landge@arm.com>	3 months ago
Samuel Chee	a2f0e5d372	drivers: pinctrl: add pinctrl drivers for arm mps3 Adds pinctrl driver for all Arm mps3 targets Signed-off-by: Samuel Chee <samche01@arm.com> Signed-off-by: Sudan Landge <sudan.landge@arm.com>	3 months ago
Samuel Chee	99ae4bf132	drivers: pinctrl: add pinctrl driver for Arm mps2 Adds pinctrl driver for all Arm mps2 targets. Signed-off-by: Samuel Chee <samche01@arm.com> Signed-off-by: Sudan Landge <sudan.landge@arm.com>	3 months ago
Sudan Landge	d7c629696d	arch: arm: Add PXN support for Armv8.1-M What is the change? This commit adds support for Armv8.1-M MPU architecture's PXN attribute. This includes support for configuring MPU regions with PXN via custom mpu_config, devicetree and static mpu_config. The existing MPU region attribute macros are updated to retain existing behaviour with this change with an addition of REGION_RAM_ATTR_PXN to be used if one needs to configure a RAM region with PXN MPU attribute. Why do we need this change? Armv8.1-M architecture introduced a new MPU region attribute called Privilege eXecute Never (PXN). If an MPU region is configured with the PXN attribute set and if the, processor attempts to execute code in this region while at privileged level, a Memory Management Fault exception is triggered. This ensures that specific tasks are executed only in unprivileged mode and helps in preventing secure privilege escalation attacks. Signed-off-by: Sudan Landge <sudan.landge@arm.com>	4 months ago
Wilfried Chauveau	c0139fad06	drivers: gpio: mmio32: update gpio_mmio32 to behave like other divers The current implementation requires SoCs/Boards to manualy instantiate the preripherals and initilize them. The change lets Zephyr rely on the device tree setup to instantiate & initialize the relevant gpio peripheral. Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>	5 months ago
Samuel Chee	ccd47083b5	soc: arm: mps2: Add support for mps2/an500 soc Added new mps2 soc an383 to enable testing with ARM FVP. Signed-off-by: Samuel Chee <samche01@arm.com>	6 months ago
Samuel Chee	bc46e51f09	soc: arm: mps2: Add support for mps2/an386 soc Added new mps2 soc an386 to enable testing with ARM FVP. Signed-off-by: Samuel Chee <samche01@arm.com>	6 months ago
Samuel Chee	8373db572f	soc: arm: mps2: Add support for mps2/an383 soc Added new mps2 soc an383 to enable testing with ARM FVP. Signed-off-by: Samuel Chee <samche01@arm.com>	6 months ago
Sudan Landge	caa7226157	boards: mps3: Add support for corstone310/an555 What is changed? - Added a new mps3 board an555 for the soc corstone310. The qualifier to build/run application with board mps3/an555 is `mps3/corstone310/an555` for secure and `mps3/corstone310/an555/ns` for non-secure. - Added FVP variant to enable FVP testing with corstone310 and it uses the ARM FVP `FVP_Corstone_SSE-310`. The qualifier to build/run application with FVP is `mps3/corstone310/an555fvp` for secure and `mps3/corstone310/an555fvp/ns` for non-secure. Why do we need this change? - This enables FVP support and testing for corstone310. - A separate FVP variant was added for AN555 because, the TFM board used for non-secure variant differs for FPGA and FVP. TFM board `arm/mps3/corstone310/an555` should be used when testing AN555 with FVP and `arm/mps3/corstone310/fvp` should be used when testing with AN555 FPGA. Signed-off-by: Sudan Landge <sudan.landge@arm.com>	9 months ago
Sudan Landge	3092d96e5b	boards: mps3: Add support for corstone300/an552 What is changed? - Added a new mps3 board an552 for the soc corstone300. The qualifier to build/run application with board mps3/an552 is `mps3/corstone300/an552` for secure and `mps3/corstone300/an552/ns` for non-secure. - Added FVP variant to enable FVP testing with corstone300 and it uses the ARM FVP `FVP_Corstone_SSE-300_Ethos-U55`. The qualifier to build/run application with FVP is `mps3/corstone300/fvp` for secure and `mps3/corstone300/fvp/ns` for non-secure. - Note: the qualifier to build/run application with board mps3/an547 is now changed to `mps3/corstone300/an547` for secure and `mps3/corstone300/an547/ns` for non-secure. How is it changed? - Moved common code from mps3/an547 to corstone300. - Renamed soc for an547 to corstone300 and added a new soc corstone300/an552. Why do we need this change? - This enables FVP support and testing for corstone300. - SOC/qualifier for mps3/an547 was renamed to reduce code redundancy - A separate FVP variant was added for AN552 because, the TFM board used for non-secure variant differs for FPGA and FVP. TFM board `arm/mps3/corstone300/fvp` should be used when testing AN552 with FVP and `arm/mps3/corstone300/an552` should be used when testing with AN552 FPGA. Signed-off-by: Sudan Landge <sudan.landge@arm.com>	9 months ago
Yong Cong Sin	52a202309b	zephyr: bulk update to DT_NODE_HAS_STATUS_OKAY Change instances of: DT_NODE_HAS_STATUS(<node_id>, okay) to DT_NODE_HAS_STATUS_OKAY(<node_id>) Signed-off-by: Yong Cong Sin <ycsin@meta.com> Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>	9 months ago
Anas Nashif	3af24f88ce	soc: arm: move init code from SYS_INIT to hooks Replace SYS_INIT with SoC hooks and adapt SoC init code Signed-off-by: Anas Nashif <anas.nashif@intel.com>	10 months ago
Anas Nashif	f519dd1411	arch: arm: replace PLATFORM_SPECIFIC_INIT with PLATFORM_RESET_HOOK Use generic hook infrastrucutre instead of custom Kconfig and hooks for ARM. Replace z_arm_platform_init() with platform_reset(). Signed-off-by: Anas Nashif <anas.nashif@intel.com>	10 months ago
Yong Cong Sin	abbd19c393	drivers: interrupt controller: update GIC Kconfigs Selection of these GIC Kconfigs have been deprecated for more than 2 releases, users should use the devicetree method instead, update the Kconfigs. The SOCs below have been updated to not select `GIC_V3`, since their devicetree already have the required compatible: - fvp_aemv8r - rzt2m - rk3658 Signed-off-by: Yong Cong Sin <ycsin@meta.com>	1 year ago
Torsten Rasmussen	8dc3f85622	hwmv2: Introduce Hardware model version 2 and convert devices This is a squash of the ``collab-hwm`` branch which converts all in-tree boards to hardware model version 2 including build system changes, board updates and soc conversions. This squash is a combination of the following commits: ca214745a1 soc: Remove soc_legacy folder and move ARM Kconfig `f12cb0979f` scripts: ci: check_compliance: remove HWMv1 checks `1807bcf4d4` boards: mimx8mq_evk: port to HWMv2 `3ec2299c62` soc: nxp: port imx8mq SOC to HWMv2 `8ea02f4e63` boards: verdin_imx8mp: convert to HVMv2 `f2eb7652ce` boards: phyboard_pollux: move to HVMv2 `ab509a5ee0` boards: nxp: mimx8mp_evk: port M7 core to HWMv2 `06ad037f99` soc: nxp: imx8mp: port M7 core to HWMv2 `3f9e706859` boards: mimx8mm_phyboard: convert to HVMv2 `204372d264` boards: imx8mm_evk: port CM4 core to HWMv2 `f82c961a46` soc: nxp: imx8mm: port iMX8MM M4 core to HVMv2 `6987b2e305` boards: pico_pi: convert to HVMv2 `84484e6707` boards: warp7: convert to HWMv2 `ae443d1e3c` boards: meerkat96: port to HWMv2 `e3629c64e6` boards: colibri_imx7d: port to HWMv2 `fc835d893d` soc: nxp: convert iMX7 Dual core to HWMv2 `29ef2f23eb` boards: udoo_neo_full: convert to HWMv2 `fd49b1749e` soc: nxp: convert iMX6 SoloX core to HWMv2 `1e59b7a3fd` soc: nxp: imxrt11xx: only set CONFIG_CPU_HAS_FPU_DOUBLE_PRECISION for M7 `69bb0eb258` hwmv2: MAINTAINERS: Fix NXP maintainer yaml `1c4458890f` boards: firefly: roc_rk3568_pc: Fix SMP configuration `651a4370ad` boards: Fix variants and revisions `196cfda66d` tests/samples: Drop default revision identifiers `6ec6b1d75a` boards: Drop revision from twister identifiers for default revisions `b774cdd59f` scripts: utils: board_v1_to_v2: drop board_legacy prefix `7aa36e6640` boards: riscv: esp32c3_luatos_core: make usb variant `fe25709a9c` twister: add unit_testing soc and board `f88f211b4e` scripts: ci: check_compliance: improve the "not sorted" command `b21a455dfb` bluetooth: controller: Fix openisa checks `fdc76c48a7` workflow: compliance: Add rename limit `14ecafc67d` dts: bindings: vendor-prefixes: Sort entries `dbc366c3c7` soc: nxp: lpc: Move wrong configurations `8e02c08f96` maintainers: Fix invalid paths `b1b85e2495` boards: up: Fix spaces `58cc4013b3` maintainers: Fix xen path `66ce5c0b09` boards/soc: Add missing copyright headers `bb47243254` boards: qemu: x86: Remove pointless file `2e816a8a3a` samples: tests: update esp32-based board naming `9aeab17139` samples: tests: remove platform_exclude of esp32 boards `a4fe97b9de` boards: shields: m5stack_core2_ext: update board name `615fcab94a` samples: ipm_esp32: fix board labels and skip testing `7752f69b7f` boards: legacy: remove index entry for xtensa/riscv boards. `3eba827956` MAINTAINERS: update Espressif entries `914362bbd5` boards: xtensa: yd_esp32: Convert to v2 `a62278fd23` boards: xtensa: xiao_esp32s3: Convert to v2 `b6a11ccec4` boards: xtensa: olimex_esp32_evb: Convert to v2 `c1067c16d2` boards: xtensa: odroid_go: Convert to v2 `b8340b0109` boards: xtensa: m5stickc_plus: Convert to v2 `9d81e417be` boards: xtensa: m5stack_stamps3: Convert to v2 `c296672720` boards: xtensa: m5stack_core2: Convert to v2 `fada12aa9d` boards: xtensa: m5stack_atoms3_lite: Convert to v2 `fe37ebac1e` boards: xtensa: m5stack_atoms3: Convert to v2 `d32828fe6a` boards: xtensa: kincony_kc868_a32: Convert to v2 `5afba7855b` boards: xtensa: heltec_wireless_stick_lite_v3: Convert to v2 `ca48c17723` boards: xtensa: heltec_wifi_lora32_v2: Convert to v2 `db1fd4d229` boards: xtensa: esp32s3_luatos_core: Convert to v2 `a78b2552eb` boards: xtensa: esp32s3_devkitm: Convert to v2 `cc96061d96` boards: xtensa: esp32s2_saola: Convert to v2 `ed854e05d1` boards: xtensa: esp32s2_lolin_mini: Convert to v2 `4fa1ae8110` boards: xtensa: esp32s2_franzininho: Convert to v2 `5543040a18` boards: xtensa: esp_wrover_kit: Convert to v2 `2335ae79b3` boards: xtensa: esp32_ethernet_kit: Convert to v2 `f910b7ad4f` boards: xtensa: esp32_devkitc_wrover: Convert to v2 `32104db555` boards: xtensa: esp32_devkitc_wroom: Convert to v2 `e23a41200d` boards: riscv: icev_wireless: Convert to v2 `3c670e4e53` boards: riscv: xiao_esp32c3: Convert to v2 `fc7c6a060b` boards: riscv: stamp_c3: Convert to v2 `22c2edb89c` boards: riscv: esp32c3_luatos_core: Convert to v2 `0a96dcb778` boards: riscv: esp32c3_devkitm: Convert to v2 `be1ee1c446` vendors: update vendors lists `5e6c62137f` soc: espressif_esp32: Port to HWMv2 `037a3b52a4` boards: Raspberry Pi pico pwm led adjustment `7277cae6fa` samples: blinky_pwm: enable pwm_leds in rpi_pico overlay `da3e49d34e` boards: nxp: update selection of FLASH_MCUX_FLEXSPI_XIP_MEM_TARGET `bc8424dd3b` soc: nxp: imxrt: move FLASH_MCUX_FLEXSPI_XIP_MEM_TARGET to SOC level `041cb52939` soc: brcm: bcm_vk: Rename to bcnvk `576b43a95c` soc: Fix SOC_FAMILY name mismatches `e8f3e6494d` hwmv2: boards: intel: adsp: Fix runner after paths renamed `550399e927` boards: weact: stm32g431_core: Add wrongly deleted file back `08708c909e` tests: drivers: flash: Renamed missed board rename `06dac41e68` hwmv2: Convert Seagate Faze board to hwmv2 `dd8f842b40` hwmv2: nxp: update MAINTAINER paths for hwmv2 `b4d1c04978` hwmv2: lpc: updated overlay and conf files in samples and tests `067c69089e` boards: nxp: convert lpcxpresso55s69 to hwmv2 `097205b40a` hwmv2: Global fix of lpc54114_m4 overlay and conf files `d8cfa6fb29` boards: nxp: convert lpcxpresso54114 to hwmv2 `c29ed228c6` boards: nxp: convert lpcxpresso55s36 to hwmv2 `88cfd3d6ac` boards: nxp: convert lpcxpresso55s28 to hwmv2 `ad30c940ee` boards: nxp: convert lpcxpresso55s16 to hwmv2 `9e5a10ec80` boards: nxp: convert lpcxpresso55s06 to hwmv2 `5650c83268` boards: nxp: convert lpcxpresso51u68 to hwmv2 `82cf44be45` boards: nxp: convert lpcxpresso11u68 to hwmv2 `1a9c405a6f` soc: nxp: convert LPC SOC family to hardware model V2 `f2b536d253` boards: intel: doc: hwmv2: Fix some renamed paths `5ee6058710` samples/tests: Use board revisions `b76687602f` boards: Add yaml files for boards missing revisions `32ae4918d0` boards: nordic: Fix board names `cc1dabca65` MAINTAINERS: Update for renamed folders `a37ddce659` soc: xilinx: Rename to xlnx `a1393a07f6` soc: xenvm: Rename to xen `813ed00f67` soc: raspberry_pi: Rename to raspberrypi `71317d6798` soc: cadence: Rename to cdns `8cb0c51ec6` soc: broadcom: Rename to brcm `2b9db15c69` soc: andes: Rename to andestech `0101216ce1` soc: altera: Rename to altr `4b4c3ca65d` boards: wurth_elektronik: Rename to we `cdc3ef499f` boards: ublox: Rename to u-blox `cabdd4ad05` boards: space_cubics: Rename to sc `4b5bd7ae8a` boards: seeed_studio: Rename to seeed `a992785ceb` boards: raspberry_pi: Rename to raspberrypi `3c1cdc20fe` boards: laird_connect: Rename to lairdconnect `291c7cde2b` boards: cadence: Rename to cdns `95db897526` boards: broadcom: Rename to brcm `0a47b94879` boards: beagleboard: Change to beagle `9f9f221c24` boards: andes: Rename to andestech `e7869ca38a` boards: altera: Rename to altr `bf2fb5eca3` various: Change SOC_FAMILY_NRF to SOC_FAMILY_NORDIC_NRF `e25730ba56` modules: tf-m: Rename from nordic_nrf to nordic `9e3466606a` boards: nordic_nrf: Rename to nordic `09a398dcc8` soc: nordic_nrf: Rename to nordic `cb8ffc74f8` boards: renode: Add documentation index `2291ff4b55` boards: arm: riscv32_virtual: Convert to v2 `484b7f1996` soc: riscv_renode_virtual: Port to HWMv2 `cc5c2fb0c7` soc: raspberry_pi: Fix SOC_SERIES and SOC mismatch `59cb580513` soc: arm: designstart: Fix SOC_SERIES and SOC mismatch `aa9e0de7af` samples: Fix invalid links `a1480cf1cf` maintainers: Fix paths `0d719e004b` boards: Update documentation links `eb5c3e6f79` boards: wurth_elektronik: Drop duplicate prefix `a34a3640b7` boards: waveshare: Drop duplicate prefix `cf50e950e7` boards: weact: Drop duplicate prefix `737cfb548f` boards: sparkfun: Drop duplicate prefix `505494c97a` boards: segger: Drop duplicate prefix `4eaf69f37a` boards: ruuvi: Drop duplicate prefix `a1335caeae` boards: ronoth: Drop duplicate prefix `a9f7f30bf6` boards: raytac: Drop duplicate prefix `80db4c81b3` boards: qemu: Drop duplicate prefix `433d7e9976` boards: particle: Drop duplicate prefix `4ea79d19e7` boards: olimex: Drop duplicate prefix `fd4ae6f6a8` boards: mikroe: Drop duplicate prefix `36080549bd` boards: khados: Drop duplicate prefix `169bf8ae1d` boards: intel: Drop duplicate prefix `25f04d5222` boards: holyiot: Drop duplicate prefix `11c2af0de8` boards: google: Drop duplicate prefix `d5128f4016` boards: ebyte: Drop duplicate prefix `44fbc68cad` boards: dragino: Drop duplicate prefix `f7fe431b44` boards: contextual_electronics: Drop duplicate prefix `9094fea63b` boards: circuit_dojo: Drop duplicate prefix `b632acc1fc` boards: blue_clover: Drop duplicate prefix `1a3316ebdc` boards: bbc: Drop duplicate prefix `71c0344f8c` boards: arduino: Drop duplicate prefix `f0176fc25f` boards: altera: Drop duplicate prefix `36b920ed0f` boards: adi: Drop duplicate prefix `22520368d9` boards: adafruit: Drop duplicate prefix `296acfb2bc` boards: actinius: Drop duplicate prefix `55063380b7` boards: 96boards: Drop duplicate prefix `1f93394b55` boards: nxp: convert mimxrt595_evk to hardware model v2 `e7a4fd2ec1` soc: nxp: rt5xx: convert RT5xx SOC to HWMv2 `01942f1d11` twister: normalize platform name when storing files/data `477c8b84dd` twister: tests: test with slashes in platform names `64e3e816c4` soc: Add include guards `3a7aa2fa49` gitignore: update the compliance file list `84e1c17ad9` scripts: ci: check_compliance: add a check for board yml file `a90f53ad57` boards: sync up the vendor tags and vendor-list `af9aa65299` dts: vendor-prefixes: add keep-sorted markers `50f0bf05a3` dts: vendor-prefixes: sort the vendor list `a10b614aa4` dts: vendor-prefixes: ensure all prefixes are lowercase `5abe735e93` manifest: update SOF sha for NXP HWMv2 `9ab8f64ca9` modules: rename SOC_FAMILY_IMX `483ff8dd4d` modules: mcux: remove SOC_FAMILY_NXP_ADSP `f113dd5342` samples: update board name `39b31287d9` boards: nxp: Convert i.MX ADSP boards to hardware model v2 `1511e356a2` soc: nxp: Port i.MX ADSP family to hardware model v2 `c91e25ab47` soc: mec: rename all mec1501x reference to mec15xx `1c231fd939` hwmv2: boards: Convert IMXRT boards `417cff1e60` hwmv2: soc: Port IMXRT family to HWMV2 `28d4e41b1b` hwmv2: clean up arm64 soc and board empty directory `2b520f83cb` hwmv2: port NXP SoC LS1046A to V2 `bf7899c645` hwmv2: port nxp_ls1046ardb board to V2 `33f7b61866` samples/tests: Rename numaker boards `8f20ea6e93` boards: nuvoton: numaker_pfm: Split into 2 boards `7cf4ff43a1` drivers: pinctrl: imx: align with hwm v2 `c68e1fea4e` drivers: clock_control: ccm_rev2: align with hwm v2 update `3b49014a0f` hwmv2: move imx8mn EVK board to V2 `14f344eeab` hwmv2: move imx8mp EVK board to V2 `40f3f8f22d` hwmv2: move imx8mm EVK board to V2 `10bf79ea51` hwmv2: move imx8m soc for a-core to V2 `8727d5ca80` hwmv2: move imx93 EVK board to V2 `c81ef01563` hwmv2: move imx93 soc to V2 `5836c1b699` modules: mcux: introduce CONFIG_MCUX_CORE_SUFFIX `338f6f2bf1` doc: update board porting guide to match new hardware model `9639a1b5dc` soc: silabs: drop useless defconfigs `981807444e` soc: silabs: introduce SOC_GECKO_SDID `5d07e82485` soc: silabs: SOC_FAMILY_* replace SOC_GECKO_SERIES* `2fd081ac86` soc: silabs: align comments with soc tree `66d425f571` soc: silabs: split in families `5bd38f47a9` arch: arch: kconfig: Fix wrong placement of endmenu `00c6ef25be` tests/samples: Rename overlay files for renamed boards `0c639b8378` boards: Fix bools and selections `c2ef907d1d` drivers: flash: it8xxx2: Add missing Kconfigs `553de2ebc9` soc: ite: ec: it8xxx2: Fix SOC_SERIES being in wrong file `b8ec0080c2` boards: Documentation link fixes `eb7025e50f` tests: Update board names for hwmv2 `10ef3d4bd2` boards: silab: Add documentation index file `ba9fdaa1d6` boards: arm: efr32_radio: Convert to v2 `86c8d4a0ca` boards: arm: efm32pg_stk3402a: Convert to v2 `575ac5cafb` manifest: Update hal_silabs `87b2907304` boards: arm: efr32_thunderboard: Convert to v2 `14b30055ab` boards: arm: efr32mg_sltb004a: Convert to v2 `0012bfc15d` boards: arm: efr32xg24_dk2601b: Convert to v2 `f526225ead` boards: arm: efm32wg_stk3800: Convert to v2 `19e7df29df` boards: arm: efm32pg_stk3401a: Convert to v2 `0bd7d963d6` boards: arm: efm32hg_slstk3400a: Convert to v2 `795a90f9bf` boards: arm: efm32gg_stk3701a: Convert to v2 `43d5540be7` boards: arm: efm32gg_slwstk6121a: Convert to v2 `065148d856` boards: arm: efm32gg_sltb009a: Convert to v2 `1dc9a8aa17` soc: silabs_exx32: Port to HWMv2 `763571e878` tests: Expand names `dae301b8a3` boards: xen: xenvm: Expand name `19e60eef36` boards: qemu: qemu_cortex_a53: Expand names `a0a7c30f28` soc: intel: intel_adsp: Fix issues `df9a4223fe` scripts: ci: introduce soc name check in check_compliance `ed401abaff` soc: emsdsp: align SoC name defined in soc.yml to Kconfig SOC setting `fc78e5eaa4` MAINTAINERS: update RISC-V arch area paths `4e586958ff` boards: convert QEMU RISC-V 64 bit board to Zephyr HWMv2 `f4c31a2b86` boards: convert QEMU RV32E board to Zephyr HWMv2 `5b2ffc652b` boards: convert QEMU RISC-V 32 bit board to Zephyr HWMv2 `5db061a4c6` soc/riscv: convert the QEMU virt RISCV-32 SoC to HWMv2 `6547845e9d` boards: convert SparkFun RED-V Things Plus to Zephyr HWMv2 `95a1f96399` boards: convert SiFive HiFive Unmatched to Zephyr HWMv2 `e563eb0a62` soc/sifive/sifive_freedom: add SiFive Freedom FU740 SoC `8914bc58b6` boards: convert SiFive HiFive Unleashed to Zephyr HWMv2 `7e8de1e781` soc/sifive/sifive_freedom: add SiFive Freedom U540 SoC `bfcc2ed18f` boards: convert SiFive HiFive1 Rev. B to Zephyr HWMv2 `330fc38f9f` boards: convert SiFive HiFive1 to Zephyr HWMv2 `b9e06f4c38` soc/sifive/sifive_freedom: add SiFive Freedom E310 SoC `4b90b30b9d` scripts: west_commands: completion: Add hwmv2 complete to fish `0f6842e2fa` scripts: west_commands: completion: Add hwmv2 complete to zsh `b2af1e1737` scripts: west: list_boards: Fix hwmv2 output `686a4b78b8` scripts: west_commands: completion: Add hwmv2 complete to bash `396b6bb856` soc: nxp: fix typo in SoC name `765299c627` soc: broadcom: align SoC names defined in soc.yml to Kconfig SOC setting `7efd46eb41` soc: arm: align SoC names defined in soc.yml to Kconfig SOC setting `505cbc5c42` soc: mec: align SoC names defined in soc.yml to Kconfig SOC setting `951a140701` soc: ti: define SOC name in Kconfig `a795d28810` snippets: Initial HWMv2 support `f9a957e6f6` boards: nordic: nrf9160dk: Fix missing nrf52840 config `df994e7ee8` soc: xilinx: zync7000: Remove xilinx from soc series name `8dfabd56ca` soc: cypress: Add protection guard to file `447b951593` tests: kernel: tickless: Remove old board name `bad5dfa71f` boards: nordic: nrf5340dk: Fix board names `ad2e863f39` soc: atmel: Use new family prefix `3f08e714b2` soc: intel_adsp: hwmv2: Align SOC_SERIES_INTEL_ACE name and value `6734597a76` soc: intel_adsp_cavs: hwmv2: Align SOC_SERIES name and value `2908af0bcc` boards: nrf51dk/dongle: change SoC to nRF51822 `d1ceb29fca` soc: align CONFIG_SOC values to match soc.yml names `4768ccaf70` tests: drivers: gpio: gpio_api_1pin: exclude hifive1 `ebdb0879ad` boards: nxp: s32z2xxdc2: convert to hwmv2 `ae82580d08` boards: nxp: mr_canhubk3: convert to hwmv2 `c5f0defbae` boards: nxp: ucans32k1sic: convert to hwmv2 `1e46cabce6` soc: nxp: convert NXP S32 family to hwmv2 `f2f85133f2` soc: stm32: Rename series path `86642f4e78` soc: stm32: Rename Kconfig SOC_SERIES symbols `c61e807896` soc: stm32: Cleanup Kconfig.defconfig files `ca46c8abc9` tests: Fix board names `fbfed5f48f` maintainers: Update synopsys entries `8cd8b1cc47` boards: synopsys: Add documentation index `6f6cc57a04` boards: arc: hsdk4xd: Convert to v2 `c4c14a54ca` soc: snps_arc_hsdk4xd: Port to HWMv2 `06c2054e5c` boards: arc: iotdk: Convert to v2 `ff0e0fce1b` soc: snps_arc_iot: Port to HWMv2 `334264c46a` boards: arc: emsdp: Convert to v2 `8b947a0e91` soc: snps_emsdp: Port to HWMv2 `990417bbde` tests: Update board names for hwmv2 `e12719154a` boards: arc: em_starterkit: Convert to v2 `437a430fbe` soc: snps_emsk: Port to HWMv2 `f93387f968` boards: arc: hsdk: Convert to v2 `1cf2498b13` soc: snps_arc_hsdk: Port to HWMv2 `47abe81256` boards: arc: nsim: Convert to v2 `1e33786dc4` soc: snps_nsim: Port to HWMv2 `7f081914db` boards: arc: qemu_arc: Convert to v2 `bc97349dbd` soc: snps_qemu: Port to HWMv2 `a9902ff58e` boards: Use zephyr_file for file links `126e1a4e72` boards: Fix invalid documentation links `899f0257c3` boards: stm32wb: Restore missing .defconfig files `790c10b1ee` soc: x86/atom: imply mmu, do not select it `faee62088d` boards: x86: remove qemu_x86_tiny_768 `c34d186a57` x86: atom: remove soc.h with unused content `1be3a9e9d3` x86: remove legacy ia32, use atom instead `60e6b400f9` boards: qemu: move qemu_x86 -> x86 `c4fbac27e8` boards: infineon: Add documentation index `b4dd29a9c4` maintainers: Update paths for hwmv2 `380f5fdb2b` boards: cypress: Add documentation index `9de981be05` boards: arm: xmc47_relax_kit: Convert to v2 `6394e8a348` boards: arm: xmc45_relax_kit: Convert to v2 `04dbf17e19` soc: xmc_4xxx: Port to HWMv2 `c9731f1bce` boards: arm: cy8cproto_063_ble: Convert to v2 `53d41869d1` boards: arm: cy8cproto_062_4343w: Convert to v2 `46c4f01427` boards: arm: cy8ckit_062s4: Convert to v2 `d285e19cf2` boards: arm: cy8ckit_062_wifi_bt: Convert to v2 `2bebd7298c` boards: arm: cy8ckit_062_ble: Convert to v2 `af243274c2` soc: psoc6 and psoc_6: Port to HWMv2 `105a2bae84` cmake: modules: boards: Fix board deprecation for HWMv2 `dca54e000a` cmake: modules: boards: Enhance board aliases for HWMv2 `fc314e8e3f` cmake: modules: boards: Fix BOARD_ALIAS `9a7c2ce6d5` soc: gaisler: Move Kconfig file `1ac56d0501` soc: soc_legacy: mips: Remove out file `c054381a7a` boards: adjust few boards/ paths `4d93b8d9fd` boards: convert all microchip MEC boards to hwmv2 `ab2fcb1245` soc: convert microchip_mec to hwmv2 `ead4b57a7b` soc: arm64: intel_socfpga: hwmv2: Rename SoCs `d4c143d306` MAINTAINERS: intel_socfpga: Adjust to HWMv2 move `70a66ac03a` boards: arm64: intel_socfpga: Move boards to subdirectories `8a85c07799` boards: arm64: intel_socfpga_agilex5_socdk: move to HWMv2 `8c253a99fc` boards: arm64: intel_socfpga_agilex_socdk: move to HWMv2 `ab883b8019` soc: arm64: intel_socfpga: Move and convert to HWMv2 `7c8b7a153b` soc: arm: intel_socfpga_std: Rename with HWMv2 `8dc2b911f6` soc: board: intel_socfpga_std: Align names to 'Cyclone V' `402366117a` soc: arm: intel_socfpga_std: Align board subdirectory `f0a8d12745` boards: arm: cyclonev_socdk: Move to HWMv2 `2271f17a86` soc: arm: intel_socfpga_std: Move and convert to HWMv2 `841c2a9d99` boards: riscv: beaglev_fire: Convert to v2 `3b314531ab` boards: riscv: mpfs_icicle: Convert to v2 `d4ea2bf70b` boards: riscv: m2gl025_miv: Convert to v2 `5256e9fcc3` soc: microchip_miv: Port to HWMv2 `18e5cf1d51` maintainers: Update path for hwmv2 `eab8628f98` boards: arm: qemu_cortex_m3: Convert to v2 `1532f2fee1` soc: ti_lm3s6965: Port to HWMv2 `430ca6a475` maintainers: Update ambiq paths `a9b9b41b91` boards: ambiq: Add index `db0271ecbb` boards: arm: apollo4p_blue_kxr_evb: Convert to v2 `957e2b2061` boards: arm: apollo4p_evb: Convert to v2 `5a90a44454` soc: ambiq: Port to HWMv2 `a20c113fbd` boards: nxp: convert ip_k66f to hwmv2 `34e3852a54` boards: nxp: convert usb_kw24d512 to hwmv2 `20ad604de6` boards: nxp: convert twr_kv58f220m to hwmv2 `2e2a7b7656` boards: nxp: twr_ke18f: convert to hwmv2 `f7dcc2eb5e` boards: nxp: convert rddrone_fmuk66 to hwmv2 `b58e90a2e9` boards: nxp: convert hexiwear to hwmv2 `aae6e9e454` boards: nxp: frdm_kw41z: convert to hwmv2 `1d3baac2d6` boards: nxp: convert frdm_kl25z to hwmv2 `3b1d21483f` boards: nxp: frdm_k82f: port to hwmv2 `6046e6ded9` boards: nxp: port frdm_k64f to hwmv2 `0a7bf9fd79` boards: nxp: port frdm_k22f to hwmv2 `dce697c823` boards: nxp: add toctree placeholder `666a353409` soc: nxp: kinetis: convert kinetis SOC family to hardware model V2 `89f0a6034b` maintainers: Update paths for renesas boards/socs `004bd43c48` tests/samples/snippets: Update board names for hwmv2 `a6d756923d` boards: arm and arm64: rcar_h3ulcb: Convert to v2 `3801216b8d` boards: arm64: rcar_salvator_xs_m3: Convert to v2 `b7cc30aaea` boards: arm: rcar_h3_salvatorx_cr7: Convert to v2 `866427ea29` boards: arm: arduino_uno_r4: Convert to v2 `2689b3f0ee` soc: ra: Port to HWMv2 `e7ebc727c8` boards: arm: da1469x_dk_pro: Convert to v2 `903265b2bb` boards: arm: da14695_dk_usb: Convert to v2 `529a78ed51` soc: smartbond: Port to HWMv2 `97cf636ae0` boards: arm: rcar_spider_cr52: Convert to v2 `6d0c53f3a1` soc: rcar: Port to HWMv2 `44e0aa0668` soc: renesas: rzt2m: Move folder structure for more SoCs `85238fc205` boards: misc: Fixed STM32 based boards doc links `dffc08af56` boards: riscv: niosv_m: move and convert to HWMv2 `545093abe4` boards: riscv: niosv_g: move and convert to HWMv2 `ecfa192f1b` soc: riscv: intel_niosv: move and convert to HWMv2 `fd1e8cdc30` hwmv2: sof: intel_adsp: submanifest provisional link `8bf067e625` doc: boards: intel_adsp: Re-order pages `4833275ccd` MAINTAINERS: intel_adsp: Adjust to HWMv2 move `b9a70e5ea2` soc: intel_adsp: tools: pylint compliance workaround `18c70cc4bf` hwmv2: tests: boards: intel_adsp: Adjust board names `ca52baf9de` hwmv2: boards: intel_adsp: Overhaul board configurations `d1b3bcce64` soc: boards: xtensa: intel_adsp_ace: Rename with HWMv2 `f362a8ae2c` doc: soc: boards: intel_adsp_cavs25: Rename with HWMv2 `51dee5da92` tests: samples: boards: intel_adsp_cavs25: Rename with HWMv2 `e66c35e0d0` boards: xtensa: intel_adsp_cavs25: Rename board with HWMv2 `d1491a4810` soc: boards: xtensa: intel_adsp_cavs25: Rename with HWMv2 `fa0fca79c4` scripts: west: runners: intel_adsp: Adjust path to HWMv2 `acd18bfaf7` boards: xtensa: intel_adsp_ace20_lnl: move and convert to HWMv2 `546c94b958` boards: xtensa: intel_adsp_ace15_mtpm: move and convert to HWMv2 `8aab718c3e` boards: xtensa: intel_adsp_cavs25_tgph: change to board variant `30f17424a4` boards: xtensa: intel_adsp_cavs25: move and convert to HWMv2 `35a97cb524` soc: xtensa: intel_adsp: HWMv2 workaround for SOF config `fdc20fdff6` soc: xtensa: intel_adsp: move and convert to HWMv2 `22dc2b6391` cmake: improved board handling for revisions `2f1e33a2e6` cmake: improve arch error message for invalid arch selection `c47c37d3db` sample: basic: blinky_pwm: Exclude rpi_pico w variant `7a788b9a18` boards: raspberry_pi: rpi_pico: Use full name for w variant `7046b92d41` tests: atmel_sam: adc: Fix sam4e_xpro adc build `253ee9638c` tests: atmel_sam0: Update platform name `ccb4c63324` samples: atmel_sam0: Update platform name `2d4acf9230` boards: arduino_nano_33_iot: Convert to HWMv2 `a60d28969a` boards: arduino_mkrzero: Convert to HWMv2 `0409e51d3f` boards: arduino_zero: Convert to HWMv2 `1b2528df1b` boards: wio_terminal: Convert to HWMv2 `af1096e7ca` boards: ev11l78a: Convert to HWMv2 `0b1db9c53d` boards: adafruit_trinket_m0: Convert to HWMv2 `e9874671e2` boards: adafruit_itsybitsy_m4_express: Convert to HWMv2 `ba6c014071` boards: adafruit_grand_central_m4_express: Convert to HWMv2 `33ad4a51ca` boards: adafruit_feather_m0_lora: Convert to HWMv2 `9812f3d54e` boards: adafruit_feather_m0_basic_proto: Convert to HWMv2 `c76b1fbeca` boards: serpente: Convert to HWMv2 `649789e433` boards: seeeduino_xiao: Convert to HWMv2 `6b3bdb7364` boards: same54_xpro: Convert to HWMv2 `93dda5ee4b` boards: samr34_xpro: Convert to HWMv2 `e48e1f5d5b` boards: samc21n_xpro: Convert to HWMv2 `f11cf73df1` boards: saml21_xpro: Convert to HWMv2 `ac73ed6dcd` boards: samd20_xpro: Convert to HWMv2 `0fdbe3552e` boards: samd21_xpro: Convert to HWMv2 `854cff3905` boards: samr21_xpro: Convert to HWMv2 `a87ea5bc0a` soc: atmel: sam0: Port to HWMv2 `706e5d27cd` boards: riscv: neorv32: Convert to v2 `d1edcdd088` soc: neorv32: Port to HWMv2 `0f7add89ca` boards: native_sim/posix: Add 64bit versions as variants `b6edad8d68` soc: soc_legacy: remove the arm/st_stm32 folder `c58e0822a6` boards: Convert nucleo_f207zg to HWM v2 `b987093a80` soc: v2: stm32: Migrate STM32F2 series `2096fd4652` samples: bluetooth: hci_uart: Fix wrongly converted board names `830f9c5a82` MAINTAINERS: Update Atmel entries `527cd9d8cd` CODEOWNERS: Update Atmel entries `83af7d0c1c` samples: atmel_sam: Update platform name `fd9b84d457` tests: atmel_sam: Update platform name `3c72fe863c` boards: arduino_due: Convert to HWMv2 `37dfacbf9e` boards: RoboKit1: Convert to HWMv2 `1108d7b0ed` boards: sam_v71_xult: Convert to HWMv2 `bed44a5c28` boards: sam_e70_xplained: Convert to HWMv2 `40448c5a9f` boards: sam4s_xplained: Convert to HWMv2 `31273692c0` boards: sam4l_ek: Convert to HWMv2 `35b5d33ef0` boards: sam4e_xpro: Convert to HWMv2 `3b84b9910a` soc: atmel: Port SAM family to HWMv2 `da00d0e7b9` boards: Convert nucleo_wba55cg to HWM v2 `fb2103f89e` boards: Convert nucleo_wba52cg to HWM v2 `1f9a533fbc` soc: st: stm32: Migrate STM32WBA series `3f92f65b28` boards: fix documentation for alientek and blues boards `7646b74aaf` boards: stm32l4: doc: add zephyr_file to defconfig path `fea54ddcd9` boards: Convert adi_eval_adin2111ebz to HWM v2 `d47f1878b1` boards: Convert adi_eval_adin1110ebz to HWM v2 `ae42be236b` boards: Convert swan_r5 to HWM v2 `83bd1a9ecc` boards: Convert stm32l4r9i_disco to HWM v2 `39c26f09ed` boards: Convert stm32l496g_disco to HWM v2 `29d03c970b` boards: Convert stm32l476g_disco to HWM v2 `74acec315c` boards: Convert sensortile_box to HWM v2 `fee6d8676e` boards: Convert pandora_stm32l475 to HWM v2 `008b5d9392` boards: Convert nucleo_l4r5zi to HWM v2 `24e357d623` boards: Convert nucleo_l4a6zg to HWM v2 `2c5f9dcce0` boards: Convert nucleo_l496zg to HWM v2 `4da061646f` boards: Convert nucleo_l476rg to HWM v2 `15956a69b8` tests: drivers: flash: stm32: update platform name `80324f7707` boards: Convert nucleo_l452re_p to HWM v2 `9893e0d111` boards: Convert nucleo_l452re to HWM v2 `46f92b227b` boards: Convert nucleo_l433rc_p to HWM v2 `ed5d1bb4cd` boards: Convert nucleo_l432kc to HWM v2 `325f95ec20` boards: Convert nucleo_l412rb_p to HWM v2 `d055676307` boards: Convert disco_l475_iot1 to HWM v2 `c7a415d92c` boards: Convert b_l4s5i_iot01a to HWM v2 `d15144f582` soc: st: stm32: Migrate STM32L4 series `a63ff71bcb` boards: nrf_bsim: Add new nrf5340 board definitions `b53c6f412c` boards: nrf_bsim: Remove redundant option setting `83eb4fc069` MAINTAINERS: intel_ish: Adjust to HWMv2 move `715685b19f` boards: x86: intel_ish: move and convert intel_ish boards to HWMv2 `5b9ef94106` soc: x86: intel_ish: move and convert to HWMv2 `12b297707a` boards: Convert stm32wb5mmg to HWM v2 `cdcea932bc` boards: Convert stm32wb5mm_dk to HWM v2 `0a3ae2b223` boards: Convert nucleo_wb55rg to HWM v2 `20b4ce17d5` soc: st: stm32: Migrate STM32WB series `47c65400d6` soc: st: stm32: fix stm32l0 family `59ec56f9e6` boards: Convert stm32h573i_dk to HWM v2 `dc5977dbba` boards: Convert nucleo_h563zi to HWM v2 `a6e4928543` soc: st: stm32: Migrate STM32H5 series `99f248e048` soc: stm32u5: Fix references after conversion to hw modelv2 `15f16834e6` boards: Convert stm32u5a9j_dk to HWM v2 `c1ee449ef1` boards: Convert sensortile_box_pro to HWM v2 `db4deddf9d` boards: Convert nucleo_u5a5zj_q to HWM v2 `2fd3ed43d2` boards: Convert nucleo_u575zi_q to HWM v2 `902fceb173` boards: Convert b_u585i_iot02a to HWM v2 `d716ca1a10` soc: st: Migrate stm32u5 series to new hw model `b7abc89428` hwmv2: boards: x86: doc: Adjust common docs to new locations `69b334f54b` MAINTAINERS: Change paths to native and nrfbsim boards `614611a528` boards: nrf_bsim: Convert to HW model v2 `5821b9ec2e` board: native_sim/posix: Convert to hwmv2 `04cbad174e` soc: native: Convert to HWMv2 `24ca0febfc` boards: nrf_bsim: Fix path to pinctrl_soc.h `9a32559a2d` cmake: FindHostTools: Fix for hwmv2 for host based targets `c4b11e0251` boards: longan_nano: port to HWMv2 `97edd05be3` boards: gd32vf103c_starter: port to HWMv2 `9cf624c410` boards: gd32vf103v_eval: port to HWMv2 `b40bf25e5e` soc: gd_gd32: reorganize folders `71600d7e95` soc: gd_gd32: move pinctrl_soc.h content back to soc folder `2bd84a1bc5` soc: gd_gd32: port gd32vf103 series to HWMv2 `9dc342143b` boards: doc: fix a bunch of broken reference `10392d693d` doc: boards: split out shields `b2def8ed3a` boards: acrn: fix title `bf7d3efe78` boards: riscv: tlsr9518adk80d: Convert to v2 `c579770e1d` soc: telink_tlsr: Port to HWMv2 `9131540109` soc: stm32h7: Couple of tests fixes following migration `2efcefc089` boards: Convert stm32h7b3i_dk to HWM v2 `d9b295a85b` boards: Convert stm32h750b_dk to HWM v2 `a2f56bdcd5` boards: Convert stm32h747i_disco to HWM v2 `00314155df` boards: Convert stm32h735g_disco to HWM v2 `b08819dff7` boards: Convert nucleo_h7a3zi_q to HWM v2 `56456c16e5` boards: Convert nucleo_h753zi to HWM v2 `91f9198dc4` boards: Convert nucleo_h745zi_q to HWM v2 `96f1bafbf9` boards: Convert nucleo_h743zi to HWM v2 `b290f25baa` boards: Convert nucleo_h723zg to HWM v2 `9fbe6bf191` boards: Convert fk7b0m1_vbt6 to HWM v2 `44bcfe57c7` boards: Convert arduino_portenta_h7 to HWM v2 `4c86af7eae` boards: Convert arduino_opta_m4 to HWM v2 `b4f852f738` boards: Convert arduino_giga_r1 to HWM v2 `bac9789264` soc: st: Migrate stm32h7 series to new hw model `a954e1722d` boards: stm32l0: Cleanup board _defconfig files after migration `7e8515b241` boards: Convert ronoth_lodev to HWM v2 `25246c21ef` boards: Convert nucleo_l073rz to HWM v2 `09396eb2e6` boards: Convert nucleo_l053r8 to HWM v2 `70c004fd83` boards: Convert nucleo_l031k6 to HWM v2 `e3daa98e79` boards: Convert nucleo_l011k4 to HWM v2 `a2de60c6da` boards: Convert dragino_nbsn95 to HWM v2 `e877ce9cec` boards: Convert dragino_lsn50 to HWM v2 `2b50218c23` boards: Convert b_l072z_lrwan1 to HWM v2 `4a65f55916` soc: st: Migrate stm32l0 series to new hw model `cc6e6be01f` boards: fix few leftover ITE board references `a837303268` soc: stm32: Protect Kconfig symbols by SOC_FAMILY_STM32 `88e5959f17` hwm2: Fix unit_testing: it is also a legacy board by now `95e06e8663` cmake: Fix uses of old SOC path `d517d3cc24` soc: set linker script for ra4m1 `68f9aeddab` soc: ite: add SOC_SERIES_ITE_IT8XXX2 guards around ITE options `ccf4f48f01` boards: convert ite boards to hwmv2 `4a6e286a3b` soc: convert ite_ec to hwmv2 `12e375f826` doc: handle arch / soc / board docs in new hardware model `b4db917de9` boards: Add documentation index files `d6e0d27efe` samples: bluetooth: hci_uart: Fix wrong named files `bc16a7a727` tests: Update board names for hwmv2 `2834883843` boards: riscv: rv32m1_vega: Convert to v2 `9c68231ba9` soc: openisa_rv32m1: Port to HWMv2 `986e9619fd` soc: starfive_jh71xx: Port to HWMv2 `e82932e787` boards: riscv: litex_vexriscv: Convert to v2 `cb9339f88f` soc: litex_vexriscv: Port to HWMv2 `1cd4c34654` boards: riscv: opentitan_earlgrey: Convert to v2 `92eadf06b8` soc: opentitan: Port to HWMv2 `a8659e170b` boards: riscv: titanium_ti60_f225: Convert to v2 `359133d725` soc: efinix_sapphire: Port to HWMv2 `6d466429ed` soc: soc_legacy: riscv: litex_vexriscv: Add updated paths `a1ff441eb3` boards: riscv: adp_xc7k_ae350: Convert to v2 `ef82a8255c` soc: ae350: Port to HWMv2 `282204758a` samples: boards: stm32: ccm: fix include path `8ca9341195` samples: basic: threads: fix broken reference `8a947f446d` boards: nrf52840dk: fix rst syntax `324cb41153` boards: nordic_nrf: fix broken references `963c74df1c` boards: intel_(ish\|adl\|ehl\|rpl), up_squared: fix include paths `8d518ce504` boards: legacy: drop empty folders `0fef0cef5b` boards: mps2: fix table formatting `e52ccc244f` boards: add HWMv2 board index `c7426eca5e` boards: arm: add legacy tag `1eba9d8a8f` boards: acrn: create vendor folder `8d92edc727` tests: kernel: Adjust qemu_x86_tiny_768 configuration HWMv2 `75117d1b2d` scripts: ensure posix path is used with --cmakeformat `0b0384b56a` maintainers: update paths after HWMv2 changes `c1b77b223d` boards: arm: pan1783: Convert to v2 `91a077b2ab` boards: posix: nrf_bsim: Update paths `413b6c2a40` cmake: modules: configuration_files: Add board identifier overlay file `4f572ba24f` treewide: Update board names for hwmv2 `cb348c7edf` boards: arm: nrf54l15pdk_nrf54l15: Convert to v2 `811ad90566` boards: arm: nrf54h20pdk_nrf54h20: Convert to v2 `d44ef90cf8` soc: nordic_nrf: Migrate nRF54H/nRF54L to v2 and fix nrf `c860f205de` boards: arm: nrf9151dk_nrf9151: Convert to v2 `fba98a1763` soc: nordic_nrf: Migrate nRF9151 to v2 `5c156a2d35` boards: arm: 96b_carbon_nrf51: Convert to v2 `cfc47a3a4b` boards: arm: nrf9161dk_nrf9161: Convert to v2 `37129b4e44` boards: arm: nrf9131ek_nrf9131: Convert to v2 `a923beba5d` boards: arm: bl5340_dvk: Convert to v2 `d242b2703b` boards: arm: raytac_mdbt53v_db_40_nrf5340: Convert to v2 `9c80d4e644` boards: arm: raytac_mdbt53_db_40: Convert to v2 `28268c4938` boards: arm: nrf5340_audio_dk_nrf5340: Convert to v2 `33ad2b5bc6` boards: arm: thingy53_nrf5340: Convert to v2 `40daa94f2d` boards: arm: nrf9160_innblue22: Convert to v2 `2b0dbb9d51` boards: arm: nrf9160_innblue21: Convert to v2 `ee6f7697ac` boards: arm: sparkfun_thing_plus_nrf9160: Convert to v2 `594e4bad6b` boards: arm: circuitdojo_feather_nrf9160: Convert to v2 `a5803ba099` boards: arm: actinius_icarus: Convert to v2 `db8c275456` boards: arm: actinius_icarus_bee: Convert to v2 `30177cf53d` boards: arm: actinius_icarus_som: Convert to v2 `486504cf24` boards: arm: actinius_icarus_som_dk: Convert to v2 `dd0672a64c` boards: arm: nrf9160dk_: Convert to v2 `c1565b3d14` boards: arm: xiao_ble: Convert to v2 `6dd2723314` boards: arm: qemu_cortex_m0: Convert to v2 `ee1ce24a42` boards: arm: bbc_microbit: Convert to v2 `1952d559f2` boards: arm: rm1xx_dvk: Convert to v2 `9e12c3d8bd` boards: arm: nrf51dongle_nrf51422: Convert to v2 `0ffbc1da33` boards: arm: nrf51_blenano: Convert to v2 `be52dfb7b6` boards: arm: nrf51_vbluno51: Convert to v2 `4c29d1827f` boards: arm: nrf51_ble400: Convert to v2 `5b4a9556fd` boards: arm: raytac_mdbt53_db_40_nrf5340: Fix typo `69e5d87a15` boards: arm: contextualelectronics_abc: Convert to v2 `5e4ace1bbe` boards: arm: degu_evk: Convert to v2 `2762460a64` boards: arm: pan1781_evb: Convert to v2 `fdc3913e76` boards: arm: ubx_evkninab1_nrf52832: Convert to v2 `9c9c3a09a1` boards: arm: holyiot_yj16019: Convert to v2 `109edc296f` boards: arm: blueclover_plt_demo_v2_nrf52832: Convert to v2 `7bfcdbbe8f` boards: arm: decawave_dwm1001_dev: Convert to v2 `0fbb543983` boards: arm: acn52832: Convert to v2 `073e0f8080` boards: arm: we_proteus2ev_nrf52832: Convert to v2 `197a19f396` boards: arm: ebyte_e73_tbb_nrf52832: Convert to v2 `1616fc8ae5` boards: arm: nrf52_vbluno52: Convert to v2 `5622077738` boards: arm: nrf52_sparkfun: Convert to v2 `a6289516e4` boards: arm: 96b_nitrogen: Convert to v2 `439d836883` boards: arm: nrf52_blenano2: Convert to v2 `16e65f09c4` boards: arm: arduino_nicla_sense_me: Convert to v2 `862efd5a21` boards: arm: thingy52_nrf52832: Convert to v2 `dede0f6cd3` boards: arm: nrf52_adafruit_feather: Convert to v2 `91e864ea29` boards: arm: nrf52832_mdk: Convert to v2 `47ec3e416b` boards: arm: ruuvi_ruuvitag: Convert to v2 `52f797a227` boards: arm: pinetime_devkit0: Convert to v2 `433db339f9` boards: arm: ubx_evkannab1_nrf52832: Convert to v2 `a646d3f2d5` boards: arm: ubx_bmd300eval_nrf52832: Convert to v2 `d0d434bf86` cmake: print identifier instead of variant `c3f5ed8157` boards: arm: we_proteus3ev_nrf52840: Convert to v2 `eecff8ee7a` boards: arm: nrf52840_mdk_usb_dongle: Convert to v2 `34507614f6` boards: arm: nrf52840_mdk: Convert to v2 `f02b56cb96` boards: arm: nrf52840_blip: Convert to v2 `600c55c92a` boards: arm: nrf52840_papyr: Convert to v2 `f294bfc5e4` boards: arm: reel_board: Convert to v2 `882524d2a0` boards: arm: nrf21540dk_nrf52840: Convert to v2 `4bce0e9b39` boards: arm: nrf52840dongle_nrf52840: Convert to v2 `d0229c771f` boards: arm: particle_argon: Convert to v2 `23a0570e64` boards: arm: particle_boron: Convert to v2 `b6d3e1764f` boards: arm: particle_xenon: Convert to v2 `499f3e7902` boards: arm: rak5010_nrf52840: Convert to v2 `9ae6b1804d` boards: arm: rak4631_nrf52840: Convert to v2 `fe2c90da5c` boards: arm: pinnacle_100_dvk: Convert to v2 `3d4d46698c` boards: arm: ubx_evkninab3_nrf52840: Convert to v2 `b1afbf0158` boards: arm: ubx_bmd380eval_nrf52840: Convert to v2 `9f9897c872` boards: arm: ubx_bmd345eval_nrf52840: Convert to v2 `f7fb2030c7` boards: arm: ubx_bmd340eval_nrf52840: Convert to v2 `7186432662` boards: arm: raytac_mdbt50q_db_40_nrf52840: Convert to v2 `32c4bdc0c4` boards: arm: pan1780_evb: Convert to v2 `7b64c638a8` boards: arm: pan1770_evb: Convert to v2 `156ee8ad8a` boards: arm: mg100: Convert to v2 `3d33dadeb0` boards: arm: arduino_nano_33_ble: Convert to v2 `4fee7371d2` boards: arm: adafruit_itsybitsy_nrf52840: Convert to v2 `ad37a0c222` boards: arm: adafruit_feather_nrf52840: Convert to v2 `cf85b7169f` boards: arm: bt510: Convert to v2 `44b67ac430` boards: arm: bt610: Convert to v2 `7dbb65d371` boards: arm: ubx_evkninab4_nrf52833: Convert to v2 `5e79cb957d` boards: arm: raytac_mdbt50q_db_33_nrf52833: Convert to v2 `12bd83a218` boards: arm: pan1782_evb: Convert to v2 `1a135ec352` boards: arm: bbc_microbit_v2: Convert to v2 `4dbe97e5ea` boards: arm: nrf52833dk: Convert to v2 `d632b90043` boards: arm: ubx_bmd360eval_nrf52811: Convert to v2 `cc1a30f24b` boards: arm: we_ophelia1ev_nrf52805: Convert to v2 `df0df9000b` boards: arm: ubx_bmd330eval_nrf52810: Convert to v2 `d2c7972a9a` boards: arm: nrf52dk: Convert to v2 `202c2bf447` boards: arm: bl654_sensor_board: Convert to v2 `c3e36f2042` boards: arm: bl654_usb: Convert to v2 `b9dd58aea1` boards: arm: bl654_dvk: Convert to v2 `0e1898b093` boards: arm: bl653_dvk: Convert to v2 `286f4a7524` boards: arm: bl652_dvk: Convert to v2 `d1709cdb37` boards: update nRF51dk board to board scheme v2. `8f040cff2c` boards: Update nrf5340dk_nrf5340 to HWMv2 scheme `8c90fae8e0` boards: update nRF52840dk_nrf52840/nrf52811 board to board scheme v2. `c828dcc60e` boards: common: openocd-nrf5: Add HWMv2 support `c79f1b0d94` kconfig: soc: adopt Nordic SoC series to support hw model v2 scheme `3584b30fc1` tests: Update board names for hwmv2 `94024d940e` boards: arm: arty_a7: Convert to v2 `8053c3a8df` boards: arm: scobc_module1: Convert to v2 `d5473b76fe` soc: designstart: Port to HWMv2 `f5792b05e7` boards: arm: fvp_baser_aemv8r_aarch32: Convert to v2 `ff202daa8e` soc: fvp_aemv8r_aarch32: Port to HWMv2 `e66cbc2945` boards: arm: v2m_musca_s1: Convert to v2 `33b47b2edb` boards: arm: v2m_musca_b1: Convert to v2 `baeebd31d2` soc: musca: Port to HWMv2 `73b257a3f9` boards: arm: v2m_beetle: Convert to v2 `85de0888ec` soc: beetle: Port to HWMv2 `867960a891` manifest: Update modules `6ca677ed3a` boards: arm: mps2: Convert to v2 `bcf4ad19d4` twister: build_dir: convert / to _ to support hwmv2 `0ac386683f` soc: Kconfig.v2: Add SOC_PART_NUMBER `9242c3c78f` soc: stm32: soc.yml: reorder series `248d17f160` boards: stm32: cleanup `0a67265e99` boards: stm32: fix for boards with revisions `f8d44317ee` soc: stm32l5: Rename overlays for nucleo_l552ze_q ns target. `400343d17e` soc: stm32: Set default on USE_DT_CODE_PARTITION `d783ef549a` soc: stm32l5: Update stm32l5 non secure targets in various places `643aeac552` boards: Convert stm32l562e_dk to HWM v2 `e601d64344` boards: Convert nucleo_l552ze_q to HWM v2 `2f7a387b32` soc: st: Migrate stm32l5 series to new hw model `519752efcd` boards: xenvm: doc: Remove reference to deleted file `06263dd717` boards: xenvm: Unset HEAP_MEM_POOL_SIZE in gicv3 variant `66b0df5526` boards: qemu_cortex_a53: Fix Kconfig warnings in SMP variant `fa07bd9419` boards: mps3: Fix non-secure variant `8f6f0726dd` boards: Move xenvm under xen `7b155a7031` boards: Raspberry Pi vendor fix `804697afa5` boards: Move 96b_aerocore to 96boards `d2f001e320` boards: x86: acrn: move and convert to HWMv2 `ec7f7b3c30` tests: kernel: qemu_x86: adjust to the HWMv2 `89dfcddc7e` boards: x86: qemu_x86_tiny@768: change to board variant `eb724eb6a7` boards: x86: qemu_x86: optimize default HWMv2 configurations `6f1043cde6` boards: x86: qemu_x86: move and convert to HWMv2 `cab924cbfb` soc: x86: ia32: move and convert to HWMv2 `237fdff918` soc: x86: lakemont: move and convert to HWMv2 `03042b7704` boards: move 96b_carbon to 96boards folder `767b94414e` boards: rename vendor seeed to seeed_studio `07fa3a3d79` boards: Convert olimex_lora_stm32wl_devkit to HWM v2 `ba01d3beca` boards: Convert nucleo_wl55jc to HWM v2 `7ce84f4041` boards: Convert lora_e5_mini to HWM v2 `b988bae576` boards: Convert lora_e5_dev_board to HWM v2 `6fbf39c726` soc: v2: stm32: Migrate STM32WL series `4a41878442` soc: st: stm32g4: add missing include `1e79ba15f6` boards: Convert weact_stm32g431_core to HWM v2 `ffdcb60185` boards: Convert nucleo_g474re to HWM v2 `d6acb08d3e` boards: Convert nucleo_g431rb to HWM v2 `90e592ffd1` boards: Convert b_g474e_dpow1 to HWM v2 `eb8a7e3441` soc: st: stm32: Migrate STM32G4 series `ada469f237` tests: Update board names for hwmv2 `0342433187` boards: arm: npcx9m6f_evb: Convert to v2 `c10248d964` boards: arm: npcx7m6fb_evb: Convert to v2 `21ddc5e6a6` boards: arm: npcx4m8f_evb: Convert to v2 `5500f3ef21` soc: npcx: Port to HWMv2 `e7baf09ede` soc: m48x: Port to HWMv2 `5bae4a6480` boards: arm: numaker_pfm_m467: Convert to v2 `3b0bd70c8c` soc: m46x: Port to HWMv2 `d52eab9e83` boards: Convert stm32g081b_eval to HWM v2 `6f2835cb11` boards: Convert stm32g071b_disco to HWM v2 `ca36d331d2` boards: Convert stm32g0316_disco to HWM v2 `662cc4e09b` boards: Convert nucleo_g0b1re to HWM v2 `dd9bc29769` boards: Convert nucleo_g071rb to HWM v2 `353da23ffb` boards: Convert nucleo_g070rb to HWM v2 `acc932b424` boards: Convert nucleo_g031k8 to HWM v2 `cea9b140fd` boards: Convert google_twinkie_v2 to HWM v2 `52e025943a` soc: st: stm32: Migrate STM32G0 series `1c7347686a` ci: update check_compliance to not create duplicate lines in Kconfig `9debd98799` hwmv2: boards: up_squared_pro_700: Add missed intel_adl changes `adab07c42f` boards: Convert msp_exp432p401r_launchxl to HWM v2 `642aacdcdf` soc: ti_simplelink: Add missing SoC `48637066d3` boards: Fix file paths in documentation `e983bc2a23` samples/tests: Fix mps3 board name `61e0f32716` boards: Convert stm32f3_seco_d23 to HWM v2 `a1688ff641` boards: Convert stm32f3_disco to HWM v2 `35fb228599` boards: Convert stm32373c_eval to HWM v2 `10e5d1122b` boards: Convert nucleo_f334r8 to HWM v2 `c319cb19f0` boards: Convert nucleo_f303re to HWM v2 `11725ccac1` boards: Convert nucleo_f303k8 to HWM v2 `400f7f6a4f` boards: Convert nucleo_f302r8 to HWM v2 `8d84861390` soc: v2: stm32: Migrate STM32F3 series `85b9eee7e8` boards: arm: kv260_r5: Convert to v2 `dafbd638e4` boards: arm: mercury_xu: Convert to v2 `3ecd12f415` boards: arm: qemu_cortex_r5: Convert to v2 `5db2390e9d` soc: xilinx_zyncmp: Port to HWMv2 `9ba8195cdc` boards: arm: qemu_cortex_a9: Convert to v2 `8e94b85361` boards: arm: zybo: Convert to v2 `c970127fc2` soc: xilinx_zynq7000: Port to HWMv2 `394c75373c` boards: arm: ast1030_evb: Convert to v2 `f2a1cc8714` soc: ast10x0: Port to HWMv2 `28f3f25945` boards: arm: cc3235sf_launchxl: Convert to v2 `c3e480f740` boards: arm: cc3220sf_launchxl: Convert to v2 `fd5847123f` boards: arm: beagleconnect_freedom: Convert to v2 `76ba9a0587` boards: arm: cc1352p1_launchxl: Convert to v2 `719baa8850` boards: arm: cc1352r1_launchxl: Convert to v2 `5060a61ae1` boards: arm: cc1352r_sensortag: Convert to v2 `99584be1c5` boards: arm: cc26x2r1_launchxl: Convert to v2 `2dc8933942` soc: ti_simplelink: Port to HWMv2 `a5b004663b` scripts/utils/board_v1_to_v2.py: couple of fixes `77c2c333e5` boards: move 96b_stm32_sensor_mez to 96boards `c14ff98650` boards: stm32f411e_disco: delete obsolete file `bcdc268ccf` boards: Convert stm32mp157c_dk2 to HWM v2 `0c8ba92e1f` boards: Convert 96b_avenger96 to HWM v2 `b54fe33077` soc: v2: stm32: Migrate STM32MP1 series `2ba3639b2a` boards: Convert nucleo_c031c6 to HWM v2 `dbc5ed79f5` soc: st: stm32: Migrate STM32C0 series `ce6d493aa3` boards: Convert stm32l1_disco to HWM v2 `a28086a9ca` boards: Convert nucleo_l152re to HWM v2 `1b2a511d06` boards: Convert 96b_wistrio to HWM v2 `ce281f09ab` soc: v2: stm32: Migrate STM32L1 series `cdb5364fd7` boards: Convert stm32f769i_disco to HWM v2 `768f173dcb` boards: Convert stm32f7508_dk to HWM v2 `21bbbbd9cb` boards: Convert stm32f746g_disco to HWM v2 `bab4265693` boards: Convert stm32f723e_disco to HWM v2 `58f8fe82ba` boards: Convert nucleo_f767zi to HWM v2 `37e9084070` boards: Convert nucleo_f756zg to HWM v2 `d467e7053a` boards: Convert nucleo_f746zg to HWM v2 `5f2808d7cc` boards: Convert nucleo_f722ze to HWM v2 `bbb73e7550` soc: st: Migrate stm32f7 series to new hw model `e9094afc4d` soc: st: stm32: stm32f4: change SOC_STM32F405XG to SOC_STM32F405XX `a1712cdd53` boards: Convert stm32f4_disco to HWM v2 `5be404b365` boards: Convert stm32f469i_disco to HWM v2 `baaa697ab2` boards: Convert stm32f429i_disc1 to HWM v2 `69ecab3c90` boards: Convert stm32f412g_disco to HWM v2 `2a572e3fb0` boards: Convert stm32f411e_disco to HWM v2 `ecfbf42757` boards: Convert stm32f401_mini to HWM v2 `e0191d03bb` boards: Convert steval_fcu001v1 to HWM v2 `4454648976` boards: Convert segger_trb_stm32f407 to HWM v2 `f0ad6ee6b8` boards: Convert olimex_stm32_p405 to HWM v2 `1f5e228ec8` boards: Convert olimex_stm32_h407 to HWM v2 `834bdb615e` boards: Convert olimex_stm32_h405 to HWM v2 `8f27fa8de2` boards: Convert olimex_stm32_e407 to HWM v2 `f8633a9038` boards: Convert nucleo_f446ze to HWM v2 `07e0bd2c07` boards: Convert nucleo_f446re to HWM v2 `24d7f625dc` boards: Convert nucleo_f429zi to HWM v2 `157a8cde53` boards: Convert nucleo_f413zh to HWM v2 `4ec99c31b0` boards: Convert nucleo_f412zg to HWM v2 `a21546140a` boards: Convert nucleo_f411re to HWM v2 `43f01ab6de` boards: Convert nucleo_f410rb to HWM v2 `60c16bcb8b` boards: Convert nucleo_f401re to HWM v2 `2db228d730` boards: Convert mikroe_mini_m4_for_stm32 to HWM v2 `73fc26225c` boards: Convert mikroe_clicker_2 to HWM v2 `6b62d90114` boards: Convert google_dragonclaw to HWM v2 `fa845af309` boards: Convert blackpill_f411ce to HWM v2 `5c8c3c3be0` boards: Convert blackpill_f401ce to HWM v2 `3c02db1290` boards: Convert blackpill_f401cc to HWM v2 `7eeb723cb7` boards: Convert black_f407zg_pro to HWM v2 `4f9461d068` boards: Convert black_f407ve to HWM v2 `a821de8532` boards: Convert az3166_iotdevkit to HWM v2 `ba580c7236` boards: Convert adi_sdp_k1 to HWM v2 `eb272ddf19` boards: Convert adafruit_feather_stm32f405 to HWM v2 `58ed121c3a` boards: Convert 96b_stm32_sensor_mez to HWM v2 `b0d70959d3` boards: Convert 96b_neonkey to HWM v2 `b1088baadc` boards: Convert 96b_carbon to HWM v2 `18d867b0a9` boards: Convert 96b_argonkey to HWM v2 `ee6ede7119` boards: Convert 96b_aerocore2 to HWM v2 `b48e70ead9` soc: v2: stm32: Migrate STM32F4 series `14d2b955da` cmake: convert path to CMake style before writing Kconfig files `9c4ac6a202` boards: posix: bsim: Update paths `14b57f56d7` tests: drivers: gpio: gpio_ite_it8xxx2_v2: Temp fix `f3b173be18` scripts: board_v1_to_v2: Update following move to boards_legacy `05b50f6691` cmake: CMake soc dir variable improvements for HWMv2 `a188e01a12` hwmv2: move all ported boards and socs to their final location `22c53e97b5` hwmv2: move all non-ported legacy boards and socs to legacy folders `53f3b181b0` soc: ti_k3: Port to HWMv2 `9f19a2075a` soc: rk3568: Port to HWMv2 `b8928b1628` soc: rk3399: Port to HWMv2 `cda3a74868` boards: arm64: qemu_kvm_arm64: Convert to v2 `70d704bd20` soc: x86: atom: move and convert to HWMv2 `4789e1068e` boards: x86: intel_rpl: move and convert raptor_lake boards to HWMv2 `384307e3dc` soc: x86: raptor_lake: move and convert to HWMv2 `ed025df674` boards: x86: intel_ehl: move and convert elkhart_lake boards to HWMv2 `994b6e1731` soc: x86: elkhart_lake: move and convert to HWMv2 `73b30a04cf` boards: x86: up_squared_pro_7000: move and convert to HWMv2 `83b133c207` boards: x86: intel_adl: move and convert alder_lake boards to HWMv2 `847a12f1e4` soc: alder_lake: move and convert to HWMv2 `67f4c8d2a1` samples: up_squared: adjust gpio_counter to HWMv2 `5326b5bfc0` boards: x86: up_squared: move and convert to HWMv2 `cfd5e691b4` soc: apollo_lake: move and convert to HWMv2 `ac9c235741` boards: xtensa: qemu_xtensa: Convert to v2 `f198c3a761` ci: update to osource for soc/Kconfig.defconfig files `e438e6cad4` ci: add SOC_SERIES_ as false positive in check_compliance.py `95e34da7c1` soc: v2: Convert st_stm32 to st/stm32 `313717df76` soc: mps3: Fix missing family `392c3969ed` boards: arm: am62x_m4: Convert to v2 `8f245d764d` tests: Update board names for hwmv2 `8f71bb7b4f` boards: arm64: khadas_edgev: Convert to v2 `e27d23aad0` soc: rk3399: Port to HWMv2 `80823b860e` boards: arm64: roc_rk3568_pc: Convert to v2 `72e4483dec` soc: rk3568: Port to HWMv2 `bed94669e3` boards: arm64: phycore_am62x_a53: Convert to v2 `c01af5a7b8` soc: ti_k3: Port to HWMv2 `1e563b4ca3` boards: arm64: xenvm: Convert to v2 `76e484adae` soc: xenvm: Port to HWMv2 `34412f7fe2` boards: arm64: rpi_4b: Convert to v2 `9be50e2ca9` soc: bcm2711: Port to HWMv2 `bbbed12c2f` boards: arm64: qemu_kvm_arm64: Convert to v2 `4f5ec7ff8f` soc: qemu_virt_arm64: Port to HWMv2 `d8d1b9f200` boards: arm64: qemu_cortex_a53: Convert to v2 `30bd34b31e` soc: qemu_cortex_a53: Port to HWMv2 `c20d0dcbb6` boards: arm64: fvp_baser_aemv8r: Convert to v2 `02ed6af463` boards: arm64: fvp_base_revc_2xaemv8a: Convert to v2 `1b175003a4` soc: fvp_aemv8*: Port to HWMv2 `de231b911d` boards: v2: Clean up obsolete comments `aa9597f6d9` boards: Convert waveshare_open103z to HWM v2 `9644828c81` boards: Convert stm32vl_disco to HWM v2 `86ab2bd430` boards: Convert stm32_min_dev to HWM v2 `d88d3ddcc4` boards: Convert stm32f103_mini to HWM v2 `0ccc0204e1` boards: Convert stm3210c_eval to HWM v2 `dd9972d782` boards: Convert olimex_stm32_h103 to HWM v2 `a2c2e1406d` boards: Convert olimexino_stm32 to HWM v2 `2d9c62e118` boards: Convert nucleo_f103rb to HWM v2 `e8ba99dc59` soc: v2: stm32: Migrate STM32F1 series `9a93916604` tests: Update board names for hwmv2 `9c4d94844d` boards: arm: bcm958401m2: Convert to v2 `feaf4ffba1` boards: arm: bcm958402m2: Convert to v2 `87f0827121` soc: bcm_vk: Port to HWMv2 `4526be24a5` boards: arm: quick_feather: Convert to v2 `cd921d2b97` boards: arm: qomu: Convert to v2 `b3c04051fc` soc: quicklogic_eos_s3: Port to HWMv2 `a73a9e7533` boards: v2: Clean up obsolete comments `8d87bcc167` boards: Convert stm32f0_disco to HWM v2 `1933585785` boards: Convert stm32f072_eval to HWM v2 `6f9fe5429d` boards: Convert stm32f072b_disco to HWM v2 `9dc78e4025` boards: Convert stm32f030_demo to HWM v2 `35113e8923` boards: Convert nucleo_f091rc to HWM v2 `b276aee9a4` boards: Convert nucleo_f070rb to HWM v2 `795f8d611b` boards: Convert nucleo_f042k6 to HWM v2 `2d82646443` boards: Convert nucleo_f031k6 to HWM v2 `959786f12d` boards: Convert nucleo_f030r8 to HWM v2 `81670db2e9` boards: Convert legend to HWM v2 `8980430aad` boards: Convert google_kukui to HWM v2 `ac020f66e0` dts: stm32f0: fix few warnings `5140e4551a` boards: v2: doc: Add vendors `77d640e0c9` soc: v2: stm32: Migrate STM32F0 series `0131e1c159` soc: v2: Add st_stm32 structure and common folder `36b63787a7` boards: v2: Add documentation index for converted boards `ae02fc5047` boards: sparc: qemu_leon3: Convert to v2 `f38f7bb223` boards: sparc: gr716a: Convert to v2 `d3cca3580e` soc: gr716a: Port to HWMv2 `6a8a0c1647` boards: sparc: generic_leon3: Convert to v2 `faf22185ce` soc: leon3: Port to HWMv2 `e94762ecdc` tests: Update board names for hwmv2 `9afcc27e05` boards: xtensa: qemu_xtensa: Convert to v2 `3e4a17018f` soc: dc233c: Port to HWMv2 `9188fdcd78` boards: xtensa: xt-sim: Convert to v2 `fcaa41cb5d` soc: xtensa_sample_controller: Port to HWMv2 `dbc413f7f7` scripts: board_v1_to_v2: Fix CONFIG_SOC_SERIES_ exclusion `6be3d4bc80` kconfig: remove Kconfig BOARD_RPI_PICO_W safe guard. `f4442fa698` boards: v2: Add documentation index for converted boards `ec5fbd67f7` boards: nios2: qemu_nios2: Convert to v2 `d3ef220460` soc: nios2-qemu: Port to HWMv2 `a223f284b5` boards: nios2: altera_max10: Convert to v2 `c381edcb73` soc: nios2f-zephyr: Port to HWMv2 `97401c7d2a` boards: mips: qemu_malta: Convert to v2 `e7a3243a24` soc: qemu_malta: Port to HWMv2 `bec82c690d` boards: v2: Add documentation index for converted boards `94f6f9b636` boards: arm: w5500_evb_pico: Convert to v2 `209235ab6e` boards: arm: sparkfun_pro_micro_rp2040: Convert to v2 `e5b1885907` boards: arm: adafruit_qt_py_rp2040: Convert to v2 `4c750818f9` boards: arm: adafruit_kb2040: Convert to v2 `8d3896caa4` boards: arm: rpi_pico: Convert to v2 `42cff42c42` soc: rpi_pico: Port to HWMv2 `c2df4ca9cb` scripts: improve yaml schema and board.yml validation for revisions `3970f90f71` cmake: clear BOARD_CACHE when invalid board identifier is given `3a70ee9ccd` cmake: improve board revision handling `3cda715fae` scripts: board_v1_to_v2: Don't add select CONFIG_SOC_SERIES_FOO `dc56a543f3` scripts: board_v1_to_v2: Add License + copyright `87147f88c4` cmake: prefer cache BOARD_IDENTIFIER over extracting from BOARD `65f5dc5b8c` cmake: fail when board identifier is applied in legacy hw model `7db2b6efd8` cmake: cache BOARD_IDENTIFIER to preserve it between CMake invocations `85dddac5a2` scripts: using extend in list_boards for variant list `6ae5c4e7fd` scripts: utils: add board v1->v2 conversion utility `ef834a12d0` maintainers: update Renesas RZT2M path `3ab7830625` boards: renesas: add documentation entry `a0c2ca0491` boards: arm: add documentation entry `27ff3654b7` boards: gigadevice: add documentation entry `6e02f43c0a` maintainers: update GD32 paths `1bfcf1d974` boards: gd32l233r_eval: convert to HWMv2 `6e621ee43f` boards: gd32f470i_eval: convert to HWMv2 `219b149768` boards: gd32f450z_eval: convert to HWMv2 `91c52b0d39` boards: gd32f450v_start: convert to HWMv2 `f0e0a973f6` boards: gd32f407v_start: convert to HWMv2 `6f592b64c9` boards: gd32f403z_eval: convert to HWMv2 `4bcb4b2ac8` boards: gd32f350r_eval: convert to HWMv2 `fdc7ed6eb0` boards: gd32e507z_eval: convert to HWMv2 `770376250d` boards: gd32e507v_start: convert to HWMv2 `a6d8b92e86` boards: gd32e103v_eval: convert to HWMv2 `a5f8e5daa1` boards: gd32a503v_eval: convert to HWMv2 `5ee799cc5f` boards: gd32f450i_eval: convert to HWMv2 `8aa8ce4ac8` soc: gigadevice: port to HWMv2 `4e203c14c7` cmake: enhanced board entry file handling `312265ee04` scripts: make SoC field mandatory in board.yml `c12ae3bcbc` boards: update Renesas rzt2m board.yml to contain SoC information `c5321c1dbe` cmake: make SoC optional for boards containing a single SoC `bcc06c60ae` scripts: support SoC list output for boards `db9e46010c` twister: update testcase.yaml and sample.yaml to mps3/an547 identifier `a988adee7d` boards: update arm mps3 an547 board to HWMv2 scheme `7dc2c9db0c` soc: use HWMv2 for arm mps3 SoC `c506675b7c` boards: update Renesas Starter Kit+ for RZ/T2M board to HWMv2 scheme `3abb792073` soc: use HWMv2 for renesas_rzt2m SoC `4f52bc646e` cmake: support hw model v2 in arch/Kconfig tree `a712b5005b` scripts: extend kconfig compliance to verify board / SoC scheme v2 `baa55141a1` twister: update twister testplan.py to handle HWMv2 boards `1f026f70eb` boards: extend list_boards.py and update boards CMake module `bd854a3af8` cmake: introduce arch and soc cmake modules for hw model v2 `c9edefa8fd` arch: add existing archs to archs.yml for HWMv2 support `61bbfb5ba2` scripts: introduce list_hardware.py for listing of architectures and SoCs `a4d1980c35` build: board/ soc: introduce hw model v2 scheme Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com> Signed-off-by: Declan Snyder <declan.snyder@nxp.com> Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com> Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com> Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no> Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com> Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com> Signed-off-by: David Leach <david.leach@nxp.com> Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com> Signed-off-by: Anas Nashif <anas.nashif@intel.com> Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com> Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com> Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com> Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no> Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com> Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com> Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com> Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com> Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no> Signed-off-by: Francois Ramu <francois.ramu@st.com> Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com> Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no> Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com> Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com> Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>	1 year ago
Daniel DeGrasse	9a96a0c50d	soc: arm: nxp_imx: fix flexspi frequency setting for iMXRT11xx SOC Commit `a10fee2d5e` (drivers: clock_control: ccm_rev2: add support for reclocking FlexSPI) introduced the ability to set the FlexSPI clock frequency at runtime on RT11xx series SOCs. However, this implementation resulted in the clock frequency being rounded up, not down. This can result in flash clock frequency violations on some flash parts, causing the system to crash when running in XIP mode. Fixes #69088 Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>	1 year ago
Gerson Fernando Budke	5903c7a669	drivers: watchdog: sam0: initialize GCLK2 in wdt_sam0_init Initialize GCLK2 to output 1.024kHz required by watchdog timer. Co-authored-by: Vlad Laba7 <vlad@laba7.com> Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>	1 year ago
Grant Ramsay	211ddf1c7e	soc: arm: xilinx_zynqmp: Add "Execute Never" MPU flag to non-code RAM Executing from RAM sections other than rom/code should cause a fault. This is tested as part of the kernel mem_protect tests. Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>	1 year ago
Gerard Marull-Paretas	1a6b88608e	soc: arm: nordic_nrf: move Kconfig.peripherals to common folder Because RISC-V cores also need to include this file, so it is no longer ARM specific. Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>	1 year ago
Gerard Marull-Paretas	d7dc942382	soc: common: nordic_nrf: move pinctrl_soc.h to a common dir Because both, RISC-V and ARM cores share the same pinctrl driver. The top level common folder will disappear with the introduction of HWMv2, where multi-arch SoCs will be well supported. Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>	1 year ago
Andrzej Głąbek	976de4edbe	drivers: serial: nrfx: Allow new UARTE instances to be used Extend Kconfig definitions and nrfx_config translations so that UARTE instances that are available in nRF54H20 can be used. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>	1 year ago
Grzegorz Swiderski	be8b2663c6	modules: hal_nordic: Integrate nrf-regtool nrf-regtool is a Python utility from Nordic Semiconductor, which is used for generating binary files with register values for given peripherals. It sources the descriptions of peripheral registers from CMSIS-SVD files (typically ones bundled with nRF MDK). For some peripherals, such as UICR, nrf-regtool supports parsing values from devicetree as well, based on the bindings already found in Zephyr. Currently, this tool is not submitted as a script to Zephyr, but it can be installed from PyPI. Having nrf-regtool installed is recommended when working with nRF54H20. Booting the Application or Radiocore CPU requires flashing not only its firmware, but also its respective UICR instance. On this SoC, the UICR is used to assign ownership of global hardware resources, including memory and peripherals, to individual cores. The Zephyr build system can call nrf-regtool to generate the UICR based on devicetree, to reflect the boot-time hardware configuration required for a given application. The generated `uicr.hex` is then merged with `zephyr.hex`, so that they can be flashed together using west. The build system integration takes the form of a CMake package, which includes a version check and reusable components; over time, some of these components can be reused by sysbuild. This package is located in the `hal_nordic` module, because it depends on the `SOC_SVD_FILE` CMake variable, which is defined there as well. Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>	1 year ago
Andrzej Głąbek	abb0934def	soc: nordic: Add initial support for nRF54H20 EngA Add nrfx and Kconfig related infrastructure plus SoC initialization code to allow building for nRF54H20 targets (Application and Radio cores). Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com> Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>	1 year ago
Andrzej Głąbek	2efd34bda3	modules: hal_nordic: nrfx_glue: Include cmsis_core_m_defaults.h ... to cover missing __ICACHE_PRESENT and __DCACHE_PRESENT symbols that should be defined in MDK files. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>	1 year ago
Manuel Argüelles	1b302f51ea	soc: arm: nxp_s32: s32k1: add support for RTC Add support for the Real Time Clock (RTC) counter. Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>	1 year ago
Daniel DeGrasse	a10fee2d5e	drivers: clock_control: ccm_rev2: add support for reclocking FlexSPI Add support for reclocking flexspi in ccm_rev2 driver. Clock update functions are provided for the RT11xx. Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>	1 year ago
Daniel DeGrasse	f81113e948	drivers: clock_control: add support for FlexSPI reclock on NXP iMX RT10XX Add support for reclocking the FlexSPI on NXP iMX RT10XX. This functionality requires an SOC specific clock function to set the clock rate, since the FlexSPI must be reset directly before applying the new clock frequency. Note that all clock constants are defined in this commit, since the memc flexspi driver now depends on a clock node being present. Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>	1 year ago
Andrzej Głąbek	eb78b71914	soc: arm: nordic_nrf: Clean up and unify a bit cmake code Consistently use `zephyr_library*` cmake functions for all nRF Series and set the Cortex-M linker script in a common place for all of them. Remove no longer needed include directories. Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>	1 year ago
Magdalena Pastula	e4aebf9cea	soc: arm: nordic_nrf: align soc_secure.h to nRF54L In nRF54L15 FICR can be accessed also from non-secure code, so it does not have NRF_FICR_S defined. Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>	1 year ago
Witold Lukasik	1d9f702260	soc: arm: nordic_nrf: add support for Nordic nrf54l family Add soc files for new Nordic family. Signed-off-by: Witold Lukasik <witold.lukasik@nordicsemi.no>	1 year ago
Witold Lukasik	a5eeb6d6db	soc: arm: nordic_nrf: add source code for validating rram partitions RRAM is a part of nRF54L15 SOC. Signed-off-by: Witold Lukasik <witold.lukasik@nordicsemi.no>	1 year ago
Magdalena Pastula	a6bd4dbc33	soc: arm: nordic_nrf: add nRF54L15 peripherals instances Add support for nRF54L15 instances of UARTE, TIMER and WTD. Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>	1 year ago
Magdalena Pastula	70b21845b2	soc: arm: nordic_nrf: add support for nRF54L15 GRTC instance Add GRTC as possible clock source. Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>	1 year ago
Witold Lukasik	daa888c37b	soc: arm: nordic_nrf: move NRF_RTC_TIMER not to be selected as default NRF_RTC_TIMER will not be a default timer in the next version of Nordic timer. It should be soc selection specific. Signed-off-by: Witold Lukasik <witold.lukasik@nordicsemi.no>	1 year ago
Ian Morris	b1a15718aa	dts-bindings: pinctrl: renesas_ra: enabled config of i/o ports 4-7 The RA_PINCFG macro is used to generate a value that can be written directly to the pin function select register. In addition to the pin function this value also contains port and pin number information, located in bit fields that are unused by the register. The bit field used to store the port information consists of 3-bits. However, a typo in the mask definition limited the field to two bits meaning only ports 0-3 could be configured. This patch resolves the issue, allowing ports 0-7 to be configured. If the port is greater than 7 another field (port4) is used to store an additional bit (allowing an additional 8 ports to be supported). However, use of this field has not yet been implemented. Signed-off-by: Ian Morris <ian.d.morris@outlook.com>	1 year ago
Andriy Gelman	c7dab3df08	drivers: can: Add xmc4xxx CAN support Adds CAN drivers for XMC4xxx SoCs. XMC4xxx has multiple CAN nodes. The nodes share a common clock and a message object pool. The CAN nodes do not have a loopback mode. Instead there is an internal bus which can be used to exchange messages between nodes on the SoC. For this reason tests/samples which rely on the loopback feature have been disabled. Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>	1 year ago
Guillaume Gautier	6b681bcbcc	soc: arm: stm32wba: add support for standby mode with ram retention Add support for STM32WBA Standby low-power mode with RAM retention. Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>	1 year ago
Sharad Patil	296c1e4768	soc: Added Support for Silabs EFR32MG12P432F1024GL125 Added support in board directory for EFR32 MG12 BRD4161A board Signed-off-by: Sharad Patil <p.sharad@capgemini.com>	1 year ago
Declan Snyder	a37bd8e7ba	soc: rt5xx: Restore ISP pins state in soc init ROM configures the ISP boot pins as gpio to determine what boot mode to be in. But some ROM revisions have a bug where they do not restore the reset state of these pins before booting application. This can cause power leakage on these pins and is not an intended configuration from Zephyr user/board point of view, so restore the reset state as part of early SOC init (disable the pins). Configuration of pins should be left up to app/board devicetree. Signed-off-by: Declan Snyder <declan.snyder@nxp.com>	1 year ago
Mahesh Mahadevan	b8bdc60427	soc: nxp: rt5xx: Remove deepsleep pin changes SOC level code should not be dynamically changing pin configurations. Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>	1 year ago
Erwan Gouriou	3d0c391ff2	soc: stm32: PM: Disable jtag port pins if no debug At chip startup, jtag pins are configured by default to enable debug. This configuration adds consumption and when using PM profile, we can save ~40uA by resetting this configuration and setting pins to analog mode. Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>	1 year ago
Jan Bylicki	6400e3f437	drivers: pinctrl: Add ZynqMP / Mercury XU pinctrl support Add a pinctrl driver for the ZynqMP SoC and the Mercury XU board powered by it. Signed-off-by: Jan Bylicki <jbylicki@antmicro.com>	1 year ago
Manuel Argüelles	f38b01c7ac	soc: arm: nxp_s32: s32k1: enable watchdog driver Enable on-chip watchdog driver support for S32K1 devices. Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>	1 year ago
Adrien MARTIN	c1ae6e5b4e	soc: stm32g0: add fdcan2 The STM32G0 soc has 2 CAN controllers. The 2nd on was not working with zephyr yet as both controllers shares the same IRQ. Recently, the shared irq system was integrated on now, both can controllers can work on this chip. Shared interrupts must be enabled only if both can controllers are enabled. Signed-off-by: Adrien MARTIN <adrienmar@kickmaker.net>	1 year ago
Sateesh Kotapati	a03c1ace6b	gecko: service files updated \| Update to GSDK 4.4.0 Updated the files present in device_init, hfxo_manager, power_manager and sleeptimer folder as per latest version of gecko_sdk. Added SL_DEVICE_INIT_HFXO_PRECISION in sl_device_init_hfxo_config. Signed-off-by: Sateesh Kotapati <sateesh.kotapati@silabs.com>	1 year ago
Pieter De Gendt	1c190045b3	soc: arm: atmel_sam: samv71: Rework clock_init Update clock_init for the Atmel SAMV71 SoC using the new PMC API. Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>	1 year ago

1 2 3 4 5 ...

2590 Commits (main)