c8d9f4b701
sysbuild: cmake: kconfig: Fix missing sysbuild Kconfig paths
...
Fixes an issue where external sysbuild Kconfig path variables
were not provided and meant they could not be overwritten
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
24 hours ago
a163f9db61
kconfig: fix typo in (arch, boards, kernel, modules, samples, share)
...
Utilize a code spell-checking tool to scan for and correct spelling errors
in `Kconfig` files within the `arch`, `boards`, `kernel`, `modules`,
`samples`, and `share` directory.
Additionally, incorporates a fix recommended by the reviewer.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
7 days ago
13a0f0504c
sysbuild: Allow to use file suffix DTS overlays
...
Allow to add an image-specific DTS overlay, that is applied based on the
FILE_SUFFIX.
Up to this point, it was possible to specify such Kconfig files
(sysbuild/<image>_<file_suffix>.conf),
but it did not work with dts overlays
(sysbuild/<image>_<file_suffix>.overlay).
This commit aligns the logic of finding configuration files for both
scenarios mentioned above.
Ref: NCSDK-NONE
Signed-off-by: Tomasz Chyrowicz <tomasz.chyrowicz@nordicsemi.no>
4 weeks ago
da197fe9ef
sysbuild: Import image devicetrees
...
Make the image devicetrees available to sysbuild for advanced use cases.
This is done by calling `zephyr_dt_import` on each image target. The DT
target properties are all expected to be prefixed with `DT_`, so there
should be no conflicts.
Thus, the DT contents of a given `<image>` can be retrieved using e.g.:
dt_nodelabel(<var> NODELABEL <label> TARGET <image>)
as noted in `extensions.cmake`.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
2 months ago
a1e66b4952
sysbuild: image_configurations: Add firmware loader dtc overlay file
...
Adds a devicetree overlay file for the firmware loader image which
sets the code partition to slot 1, which is where the firmware loader
image resides
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
2 months ago
1e73b581c6
sysbuild: Add support for image configuration dtc overlay files
...
Adds support for using image-specific configuration devicetree
overlay files
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
2 months ago
8a8b91843d
sysbuild: Add firmware loader application type support
...
Adds support for setting up a firmware loader image in a build,
which can also optionally automatically configure MCUboot and the
application image to be able to boot the firmware loader image
using the retention subsystem
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
2 months ago
e420b21834
share/sysbuild: Support single app slot RAM load mode
...
Adds a new Kconfig to support MCUboot single application slot RAM load
mode.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
3 months ago
9f12f8afb2
infrastructure: Remove hwmv1 support
...
Removes support for the deprecated hardware model version 1
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
4 months ago
29217b48a5
sysbuild: mcuboot: Add support for swap using offset mode
...
Adds a new Kconfig to allow selecting this newly introduced MCUboot
swapping algorithm
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
5 months ago
55dba488a4
sysbuild: Update MCUboot swap using move Kconfig name
...
Deprecates the old Kconfig and adds a new one which lines up with
the name of the Kconfig used by MCUboot
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
5 months ago
642e9484e3
sysbuild: populate build_info with list of images
...
Populate the build_info.yml created by sysbuild CMake with list of
images and write the build info file afterwards.
This allows users and external tools to examine which images was
included in the build even if one or more of those images fails CMake
configure or generate stage.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
5 months ago
5b988356ec
Revert "sysbuild: populate build_info with list of images"
...
This reverts commit f67939bf7e
5 months ago
f67939bf7e
sysbuild: populate build_info with list of images
...
Populate the build_info.yml created by sysbuild CMake with list of
images and write the build info file afterwards.
This allows users and external tools to examine which images was
included in the build even if one or more of those images fails CMake
configure or generate stage.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
5 months ago
17ba479585
sysbuild: Fix Kconfig symbol SIGNATURE_TYPE
...
Add missing quotes around string values, so that they won't be
interpreted as undefined symbol names.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
6 months ago
aed59d4431
sysbuild: cmake: modules: kconfig: Fix changed CMake API
...
Fixes a bug which was caused by the CMake function API having
changed in commit 4e29a35b22
6 months ago
0711f42e3a
sysbuild: Add support for snippets
...
Adds support for sysbuild loading snippets, these can be included
by using e.g.: cmake ... -DSB_SNIPPET=blah for sysbuild
directly or can be used with an application and sysbuild using
-DSNIPPET. Snippets for sysbuild can use SB_EXTRA_CONF_FILE in the
snippet file to specify an extra Kconfig fragment for sysbuild
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
6 months ago
f277631b60
sysbuild: Add missing option for MCUboot encryption support
...
Adds a missing 'default y' for the Kconfig option indicating that
encryption is supported with the current configuration
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
8 months ago
536d34fa7a
cmake: scripts: support board extension
...
Fixes : #69548
Support extending an existing board with new board variants.
This commit introduces the following changes to allow a board to be
extended out-of-tree.
The board yaml schema is extended to support an extend field which
will be used to identify the board to be extended.
A board 'plank' can be extended like this:
> board:
> extend: plank
> variants:
> - name: ext
> qualifier: soc1
For the rest of the build system this means that there is no longer a
single board directory.
The existing CMake variable BOARD_DIR is kept and reference the
directory which defines the board.
A new CMake variable BOARD_DIRECTORIES provides a list of all
directories which defines board targets for the board.
This means the directory which defines the board as well as all
directories that extends the board.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
8 months ago
9e1b3bbb65
sysbuild: images: bootloader: kconfig: Limit encryption
...
Limits selecting the encryption option to MCUboot operating modes
that support it
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
9 months ago
3406515f12
sysbuild: images: bootloader: Add RAM load note
...
Adds a note about MCUboot RAM requirements for this
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
9 months ago
646f116cca
mcuboot: Add support for RAM load mode
...
Adds supporting code that allows the RAM load mode of MCUboot to
be used and for applications to build successfully with it.
Sysbuild can be used to build images for this mode
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
9 months ago
8774f15bd2
sysbuild: cmake: Add set_config_int() function
...
Adds a function that will add an integer value to an image
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
9 months ago
09faf537dd
cmake: support build info in Zephyr
...
Store informations regarding the current Zephyr build.
The following informations are stored during CMake configure:
- Board information
- Application source directory
- Application configuration directory
- Toolchain information
- Devicetree files
- Kconfig config files
- Zephyr version
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
9 months ago
96c6c7863a
sysbuild: cmake: Fix ExternalZephyrProject_Add() revision handling
...
Fixes an issue with HWMv2 boards whereby the specified board
revision was not applied at the correct place, which would cause
the target image to fail configuration
Fixes #79208
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
9 months ago
1bea5fcacb
sysbuild: fix extra kconfig targets when using sysbuild
...
Zephyr provides a feature to hook in custom menuconfig implementations
by setting EXTRA_KCONFIG_TARGETS and then defining the corresponding
command to invoke as EXTRA_KCONFIG_TARGET_COMMAND_FOR_<target>.
This feature is broken with sysbuild because sysbuild will try to create
multiple custom targets with identical names.
This commit fix the sysbuild handling of extra kconfig targets.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
10 months ago
105a4b5eb2
cmake: initial version of a CMake yaml module
...
Initial CMake yaml module to facilitate reading yaml files into CMake,
update yaml settings and write it back to a file.
The yaml module also supports creation of yaml files from scratch.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
11 months ago
9566aa5b00
sysbuild: Add MCUboot operating mode
...
Adds a sysbuild Kconfig to select the operating mode of MCUboot
which is then propagated to the MCUboot and application images
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
11 months ago
6f5b183de7
sysbuild: check for existence of APPLICATION_CONFIG_DIR
...
Check for existence of APPLICATION_CONFIG_DIR in sysbuild.
sysbuild.conf is an optional file, meaning that sysbuild will not fail
if APPLICATION_CONFIG_DIR points to a non-existing folder.
A normal Zephyr build already fails when passing an invalid
APPLICATION_CONFIG_DIR but only because it cannot find a required
prj.conf in the folder.
Checking the existence of APPLICATION_CONFIG_DIR in sysbuild and fail
the build when a non-existing folder is passed to sysbuild ensures
sysbuild behaves similar to a normal Zephyr build regarding a
non-existing folder, while still allow sysbuild.conf itself to be
optional.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
1 year ago
be2993be6e
sysbuild: move sysbuild/application to _sysbuild
...
The sysbuild part of sysbuild/application creates a sysbuild/application
folder under top-level build dir. However, having a sysbuild folder at
this level means that tab completion for sysbuild pre-fixed build
targets will stop after completing just `sysbuild` and then show several
subfolders, making it hard to see important build targets, such as:
`ninja sysbuild_menuconfig`.
As `sysbuild/application` is just a folder name, then move it to
`_sysbuild` instead to avoid impacting tab completion for ninja and
make.
Also strip the `application` part in the process, as the extra folder
doesn't provide any extra benefit, but is just one more level to enter
when browsing the build folder structure.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
1 year ago
a54c117223
sysbuild: set APPLICATION_BINARY_DIR to sysbuild CMake folder
...
If not defined by caller, then set APPLICATION_BINARY_DIR to
CMAKE_CURRENT_BINARY_DIR. This is normally be done by
`find_package(Zephyr)`, but due to the indirection introduced with
fc1884ecf5
1 year ago
5722576186
sysbuild: clear local scope EXTRA_CONF_FILE variable
...
Sysbuild sets the EXTRA_CONF_FILE before loading kconfig.cmake.
This hides any user defined EXTRA_CONF_FILE added to the sysbuild cache.
Clear the local sysbuild EXTRA_CONF_FILE so that the hidden cache
variable re-enters current scope.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
1 year ago
4fcde701ec
sysbuild: Use UTF-8 encoding for cache
...
Fixes an issue whereby strings are placed in UTF-8 format but the
application doesn't read them in when configured using sysbuild
and another issue whereby sysbuild then reads the application's
cache and did not treat them as UTF-8
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
1 year ago
24acc7d43d
sysbuild: introduce sysbuild_root for root adjustment
...
Fixes : #73066
Introduce sysbuild_root CMake module similar to the Zephyr root CMake
module. The sysbuild_root CMake module works similar to existing root
module, but with the difference that root paths are adjusted relative to
APP_DIR which is the main image, instead of relative to sysbuild.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
1 year ago
f7d2cc2d43
cmake: use zephyr_get() and zephyr_file() for APPLICATION_CONFIG_DIR
...
Fixes : #73065
Update APPLICATION_CONFIG_DIR is Zephyr CMake and sysbuild to follow
the common principle in Zephyr for relative paths.
This means that relative paths are taken from the application source
directory when specified on command line, and require local scoped
defined APPLICATION_CONFIG_DIR to be given as absolute, for example by
using CMAKE_CURRENT_LIST_DIR.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
1 year ago
2b427f19d5
sysbuild: add support for APPLICATION_CONFIG_DIR in sysbuild
...
APPLICATION_CONFIG_DIR is supported in Zephyr and allows to adjust the
location from which prj.conf and friends are picked up.
This also works for images when using sysbuild, however sysbuild itself
ignores the value of APPLICATION_CONFIG_DIR, meaning that sysbuild only
accepts sysbuild.conf located directly in the sample folder.
Extend sysbuild to support APPLICATION_CONFIG_DIR so sysbuild follows
regular Zephyr CMake behavior.
Introduce SB_APPLICATION_CONFIG_DIR to allow changing the location
for sysbuild only, without propagating the value to images.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
1 year ago
fc1884ecf5
sysbuild: support sysbuild/CMakeLists.txt as entry point for samples
...
This commit refactors sysbuild entry code by creating a CMake sysbuild
module for image processing and place sysbuild entry code in a
<app>/sysbuild/CMakeLists.txt file.
A template/CMakeLists.txt file will be use as template for applications
which doesn't provide their own entry file.
An application may create a sysbuild/CMakeLists.txt file.
The sysbuild/CMakeLists.txt file is similar in nature to the
toplevel CMakeLists.txt file but intended to used by sysbuild.
This allows application developers to adjust how an application is
built with sysbuild.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
1 year ago
e65c6328ce
sysbuild: use ARGN instead of ARGV1
...
Use of ARGV1 is undefined when number of arguments to function is less
than 2. Therefore switch to ARGN which holds arguments beyond required
arguments.
If there are no optional arguments, then ARGN is just an empty list,
thus making it safe to use.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
1 year ago
9a47ee00fa
sysbuild: cmake: fix incorrect function name in error message
...
The name in the error message does not match the function name.
Signed-off-by: Håkon Amundsen <haakon.amundsen@nordicsemi.no>
1 year ago
de53c0d2db
sysbuild: cmake: fix sysbuild_cache_set() function
...
The sysbuild_cache_set() supports setting variables in a dedicated
sysbuild image cache. When appending to a list, the list is checked for
existance of the variable to avoid appending it again on reruns.
This was done be checking with `string(FIND ...)`, but that will also
return an index on a partial match.
A much safer approach is to use the `if(<val> IN_LIST <list>)` approach
to check for existance.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
1 year ago
d2b3e3a389
sysbuild: add SoC-specific sysbuild configuration
...
Sysbuild now supports SoC configuration,
in addition to application and board.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
1 year ago
7b2c947ac8
sysbuild: Apply FILE_SUFFIX to sysbuild.conf
...
Unless `SB_CONF_FILE` is set by the user, an optional `sysbuild.conf`
file is taken by default. If `FILE_SUFFIX=foo` is set, then it should
also be possible to find `sysbuild_foo.conf`, just like with `prj.conf`.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
1 year ago
732c504e4c
terminology: adopt CMake, python, and Kconfig code to use qualifiers
...
Followup: #69905
Adopting new board terminology for CMake, python, and Kconfig code to
use qualifiers instead of identifiers.
Also adjusted to board target where applicable.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
1 year ago
9f71b8023b
sysbuild: Add support for COMPILER_WARNINGS_AS_ERRORS
...
Adds support for the Kconfig option to enable compiler warnings
being treated as errors in all images that are build. This is a
sticky-set option which means enabling it in sysbuild will
enable it in all images, if it is then disabled in sysbuild it
will not be disabled in any of the images as a result and would
need to be manually unselected.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
1 year ago
811a74c019
boards/Kconfig: $BOARD_REVISION -> $(BOARD_REVISION)
...
Add parentheses missing around $BOARD_REVISION.
The syntax without parentheses has been deprecated for at least 5 years:
https://github.com/ulfalizer/Kconfiglib/commit/374f48873424f9
That same documentation states "Using the old syntax with an undefined
environment variable keeps the string as is." This what actually happens
on Windows where `build/zephyr/.config` looks like this:
CONFIG_BOARD_REVISION="$BOARD_REVISION"
I found this because the behavior differs on Linux where the same,
"old" syntax produces this instead:
CONFIG_BOARD_REVISION=""
This could be because environment variables work differently?
(BOARD_REVISION is passed from kconfig.cmake to kconfiglib.py thanks to
cmake -E env)
Let's not try to debug this and just drop the deprecated syntax. It
aligns both Windows and Linux on the same, expected, empty string
behavior.
Note these are the only two `def_string` found across all Kconfig files
right now.
Fixes commit c11b7852d1e2ff2a88ba
1 year ago
e2ff2a88ba
sysbuild: include HWMv2 Kconfig in sysbuild
...
Including HWMv2 Kconfig in sysbuild allows sysbuild to introduce
configuration options or defaults based on selected board and SoC.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
1 year ago
8dc3f85622
hwmv2: Introduce Hardware model version 2 and convert devices
...
This is a squash of the ``collab-hwm`` branch which converts all
in-tree boards to hardware model version 2 including build system
changes, board updates and soc conversions.
This squash is a combination of the following commits:
ca214745a1 soc: Remove soc_legacy folder and move ARM Kconfig
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
1 year ago
9fda7a3234
sysbuild: typo s/guranteed/guaranteed/
...
Simply added the missing 'a' in guaranteed. Found this
when I was too lazy to search for the correct spelling
and was hoping to just grep for it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
1 year ago
f7f320c494
sysbuild: Add support for FILE_SUFFIX
...
Adds supports for sysbuild loading project-specific Kconfiguration
fragments that are suffixed with the user-provided value
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
1 year ago
49f9d8e19c
sysbuild: kconfig: Unset shield config value variable
...
Fixes an issue with shields that have Kconfig file fragments when
being used with sysbuild, they would be loaded into sysbuild
itself which would then fail because it does not have the Kconfig
tree that zephyr applications have
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
2 years ago
Jamie McCrae
Pisit Sawangvonganan
Tomasz Chyrowicz
Grzegorz Swiderski
Ederson de Souza
Torsten Rasmussen
Benjamin Cabé
Håkon Amundsen
Marcin Szymczyk
Marc Herbert
Daniel Leung