c9e697de5f
boards: sparkfun: add PWM support for the Thing Plus Matter
...
The onboard LED is now controllable via PWM.
Signed-off-by: Tamas Jozsi <tamas.jozsi@silabs.com>
2 weeks ago
4cae4661a2
boards: sparkfun: fix the LED active state on the ThingPlus Matter
...
The LED on The Sparkfun ThingPlus Matter is active high.
Signed-off-by: Tamas Jozsi <tamas.jozsi@silabs.com>
2 weeks ago
2c43a00f65
boards: fix Bluetooth LE support on the SparkFun ThingPlus Matter MGM240
...
Create and select the proper module device tree file which loads the
correct radio config for the MGM240P module.
Signed-off-by: Tamas Jozsi <tamas.jozsi@silabs.com>
2 weeks ago
c90c2eb0ea
boards: add the zephyr_i2c to a bunch of adafruit and sparkfun boards
...
These boards have a JST SH I2C connector, add the zephyr_i2c label so
they can be used with shields made for those modules.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
4 weeks ago
a76ed223d5
soc: rpi_pico: Set the default `SYS_CLOCK_HW_CYCLES_PER_SEC` from dt
...
Avoid the individual `CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC` for each
board instead to referencing the dt value.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
1 month ago
07e4ba4240
soc/sifive: differentiate between FE310-G000 and FE310-G002
...
This commit reflects a difference between FE310-G000 and FE310-G002 SoCs,
since only the latter supports PMP. The result of that is the split of the
HiFive1 board into two separate targets, since the HWMv2 right now assumes
that board revisions share the same SoC.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
1 month ago
f384a86cc9
boards: silabs: fix boards DTS files coding style issues
...
Fix board DTS coding style issues to prevent them from spreading when a
new board is introduced and uses an existing DTS as a referance.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Don’t insert empty lines before a deindenting };.
- Insert a single empty line to separate nodes at the same hierarchy
level.
- status is "okay" by default.
- compatible property comes first in node.
- reg property comes second in node.
- status property comes last in node.
- the rest of the properties within are nodes naturally sorted.
- child nodes are sorted by address or alphabetically if there is no
address.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
1 month ago
54945f7979
boards: sparkfun: adopt zephyr:board directive
...
updates a couple boards to make the most of Sphinx board extensions.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
1 month ago
96df30829e
dts: arm: silabs: Move efr32mg24 to xg24 directory
...
Introduce subdirectory for xg24 socs.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
2 months ago
7962eaeca6
dts: Move vendor-specific dtsi to dedicated folder
...
Move all the vendor-specific dtsi files that were in dts/common to a
new folder under dts/ designated for vendor-specific files,
since they are not common at all, except for one vendor.
Change MAINTAINERS.yml to reflect the moving of the files.
Update migration guide for this change.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
2 months ago
9fc84e78e7
boards: nrf: Default to nRF Util for flashing
...
Nordic has a new tool, nRF Util (`nrfutil`) which is replacing the
previous set of command-line tools (particularly `nrfjprog`) that Zephyr
had been using by default in many of the boards to flash the firmware
onto the device.
Since nRF Util is already mature and is going to be replacing the existing
tools, including `nrfjprog`, it is now a good time to change the default
flash tool to reflect this fact.
Note that `nrfjprog` support is not being removed at all, but this may
be a breaking change for users that do not have nRF Util installed. For
this reason we also add a note in the migration guide.
More info:
https://devzone.nordicsemi.com/nordic/nordic-blog/b/blog/posts/nrf-util-unified-command-line-utility
Installation:
https://www.nordicsemi.com/Products/Development-tools/nrf-util
Documentation:
https://docs.nordicsemi.com/bundle/nrfutil/page/README.html
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
4 months ago
fe87abe0b9
boards: Remove 'xtools' toolchain variant references
...
This commit removes all references to the `xtools` toolchain variant in the
board YAML files.
Note that the `xtools` toolchain variant has been deprecated since Zephyr
v3.3.0 and now removed.
The removal process was automated using the following command line:
git grep -l xtools -- boards/*.{yml,yaml} | \
xargs -n 1 -P $(nproc) \
yq -i 'del(.toolchain[] | select(. == "xtools"))'
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
6 months ago
62ea40bb9e
drivers: spi: silabs: remove gecko from name
...
Gecko is being phased out so we changed every mention of gecko in the
silabs spi drivers
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
6 months ago
81563c12a2
boards: sparkfun: pro_micro_rp2040: fix pinctrl definitions for spi
...
The default SCK and COPI/MOSI pins on the Sparkfun Pro Micro RP2040
board correspond to `GPIO22` and `GPIO23` respectively[^1].
The existing pinctrl definitions in the `spi0_default` don't reflect
this (rather, they match the pinout of the Adafruit KB2040 MCU[^2]).
Update the board's respective pinctrl definitions to match the pinout.
[^1]: https://cdn.sparkfun.com/assets/e/2/7/6/b/ProMicroRP2040_Graphical_Datasheet.pdf
[^2]: https://learn.adafruit.com/assets/106984
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
6 months ago
da91dbdd52
doc: silabs: fix J-Link firmware update instructions
...
J-Link firmware images for silabs boards are not distributed by
SEGGER, fw update should be done with Simplicity Studio instead.
Signed-off-by: Daniel Fuchs <software@sagacioussuricata.com>
6 months ago
503721bbcc
boards: silabs: removed FLASH_BASE_ADDRESS
...
Removed FLASH_BASE_ADDRESS configuration from various boards' Kconfig.
The only thing needed in order to do this was to update the relevant dtsi
files so that the flash0 node has its reg property configured properly.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
7 months ago
92256f4d68
boards: rp2040: Lint whitespace in board.cmake files
...
Change whitespace to match the coding style for CMake files for all
rp2040-based boards.
This is foundation work ahead of adding support for boards based on the
RP235XX SoCs.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
7 months ago
da3d4f2c32
drivers: clock_control: rpi_pico: Make pinctrl-0 optional
...
No in-tree board uses this driver's pinctrl functionality, and every
RP2040-based board was configuring this to be an empty node in the
device tree, so remove them.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
7 months ago
d257460e9d
dts: arm: Move rpi_pico under raspberrypi
...
Follow the wider directory convention of dts/<arch>/<vendor>/<family>.
This is foundation work ahead of introducing support for the RP2350.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
7 months ago
8b02141ca7
Bluetooth: Controller: Replace BT_CTLR with HAS_BT_CTLR
...
Deprecate BT_CTLR, and add a new HAS_BT_CTLR as a virtual option which
specific users (like BT_LL_SW_SPLIT) select. This also means that we can
remove all places that were forcefully enabling the BT_CTLR option, and
instead we now depend on devicetree to get some local LL HCI driver
enabled which in turn also enables the HAS_BT_CTLR option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
7 months ago
26215a7d3b
boards: silabs: Remove usage of no-op pin number macro
...
The GECKO_PIN() macro does not do anything except pass the
argument through unaltered. It only serves to make DeviceTree
files more verbose. It was inconsistently used, make the .dts
files consistent by never using it.
The DBUS pinctrl driver doesn't use the port or location macros
from the gpio_gecko.h header. The pin number macro is the only
other thing defined in this header. Stop including the header on
Series 2 based boards.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
7 months ago
a40a26db32
boards: silabs: Use DBUS pinctrl driver for Series 2 boards
...
Swap from silabs,gecko-pinctrl to silabs,dbus-pinctrl for all boards
with Series 2 SoCs. Explicitly declare pin properties as part of
pinctrl pinout configuration.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
7 months ago
b5017dbb7c
boards: silabs: Remove explicit enabling of PINCTRL
...
The PINCTRL option should instead be selected by those individual drivers
which depend on it.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
7 months ago
14d0a19cc2
doc: fix occurrences of broken zephyr_file: links
...
In preparation of adding a check for dead references, this commit fixes
currently broken zehpyr_file: links.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
8 months ago
51194bf03f
soc: silabs: Default to sleeptimer for OS timer on Series 2
...
Disable BURTC timer in board defconfigs, as it's no longer used.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
9 months ago
ece5581433
boards: rpi: Fix selection of symbol
...
Fixes selection of a symbol that was done in a defconfig file,
when actually it should be done in a Kconfig file as a dependency
for the board
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
9 months ago
c6c3e194d9
boards: silabs: Remove clock configuration
...
Clock setup is now done by the clock manager based
on device tree configuration.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
9 months ago
634976f535
dts: silabs: Add clock bindings and clock tree
...
Introduce bindings for Series 2 oscillators: HFRCODPLL, HFRCOEM23,
LFRCO and LFXO.
Add clock tree representation in devicetree `clocks` node.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
9 months ago
3d0909ed18
soc: silabs: Initialize DCDC from device tree
...
The DC-DC converter was unconditionally initialized with default
settings on Series 2. Add device tree binding and nodes, and guard
call to init function. Map DT options to config header from HAL.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
9 months ago
33594595c9
boards: sparkfun: Add SPI support over EUSART in devicetree
...
Modified devicetree to integrate support for EUSART in pincontrol settings.
Signed-off-by: Teresa Zepeda Ventura <teresa.zvent@gmail.com>
9 months ago
b05eb43599
boards: sparkfun: Update board name in doc/index.rst
...
Fix board name in documentation file doc/index.rst
Signed-off-by: Teresa Zepeda Ventura <teresa.zvent@gmail.com>
9 months ago
05d59f7207
boards: Set full_name for all boards
...
Full name was set based on the information available either in board
documentation or in Twister files.
Whenever applicable, vendor name was dropped from the full name so that
all boards have a consistent naming scheme.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
9 months ago
ef784cd3fd
boards: remove test feature usb_cdc and usb
...
These test features are not required and are not used in any USB samples
or tests.
Follow-up on commit 0809b75b42
10 months ago
0abc9fb8be
boards: remove `CONFIG_PINCTRL` from defconfig files of FE310-based boards
...
This commit removes the y-selection of the `CONFIG_PINCTRL` Kconfig option
in FE310-based boards defconfig files.
It also makes drivers used in FE310 y-select `CONFIG_PINCTRL` if pinmuxing
is needed.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
10 months ago
9a16b93868
samples: hello_world: use zephyr:code-sample directive
...
Adds missing code-sample directive to the Hello World sample in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
10 months ago
df294e34e1
doc: sphinx-lint: fix bad usage of "default role"
...
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
10 months ago
9113096389
style: boards: comply with MISRA C:2012 Rule 15.6
...
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
10 months ago
d23d19d7f0
samples: bluetooth: use zephyr:code-sample directive
...
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
10 months ago
51c0cb9f5c
dts: common: nordic: default memory partitioning
...
Add default memory partitioning for the nRF53 and nRF91 series devices.
As these partitions refer to TF-M and the TF-M layouts cannot be
modified, use the partitioning scheme from TF-M.
Signed-off-by: Jordan Yates <jordan@embeint.com>
10 months ago
75023042e8
boards: sparkfun: Add support for Sparkfun Thing Plus Matter board
...
Added support for the Sparkfun Thing Plus Matter MGM240P board.
For more information about this board please check:
https://www.sparkfun.com/products/20270
Signed-off-by: Teresa Zepeda Ventura <teresa.zvent@gmail.com>
11 months ago
9097d5dac5
boards: nrf52*: use DT to configure regulators
...
Instead of board level options selecting SOC_DCDC_NRF52X or
SOC_DCDC_NRF52X_HV.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
11 months ago
436f56646b
boards: sparkfun: Add micromod nrf52840 board and asset tracker shield
...
Initial support of Sparkfun Micromod ecosystem with micromod nrf52840
board, asset tracker shield and micromod header definition.
Signed-off-by: Jeronimo Agullo <jeronimoagullo97@gmail.com>
1 year ago
c38ea288ee
boards: sparkfun: Fix incorrect pro_micro gpio-map
...
The SparkFun Pro Micro header pins are numbered D1, D0, GND, ... from top
left whereas the SparkFun Pro Micro RP2040 and the Adafruit KB2040 boards
are using gpio 0, 1, GND, ... , so the pro_micro: connector gpio-map of
these boards should reflect that.
Graphical Datasheet for SparkFun Pro Micro RP2040:
https://cdn.sparkfun.com/assets/e/2/7/6/b/ProMicroRP2040_Graphical_Datasheet.pdf
Graphical Datasheet for SparkFun Pro Micro:
https://cdn.sparkfun.com/assets/f/d/8/0/d/ProMicro16MHzv2.pdf
Pinout of the Adafruit KB2040:
https://learn.adafruit.com/assets/106984
Please note that the KB2040 uses CircuitPython pin labels D0, D1 which does
not seemt correspond to the Arduino labels D0 and D1 used by the Pro Micro.
Signed-off-by: Daniel Irekvist <ulmanyar@gmail.com>
1 year ago
da52c6e3b7
boards: Spelling and grammar fix in openocd comment
...
This file has been copied a few times. Clean up the grammar and spelling
in a comment in the file.
Signed-off-by: David Brown <david.brown@linaro.org>
1 year ago
a747470086
boards: arm: sparkfun_pro_micro_rp2040: Support JTAG
...
Add SWD debugger support for this board. Although there is not a debug
header, the SWD pins are accessible and the adaptor is not that difficult
to wire up. This will allow for debugging beyond just flashing, that the
UF2 programming setup allows for.
Signed-off-by: David Brown <david.brown@linaro.org>
1 year ago
9fd211a3f8
boards: arm: sparkfun_pro_micro_rp2040: Add RGB LED
...
The SparkFun Pro Micro RP2040 board has an WS2812-style RGB LED connected
to a GPIO pin. Add this to the devicetree so that this device can be used.
Signed-off-by: David Brown <david.brown@linaro.org>
1 year ago
8dc3f85622
hwmv2: Introduce Hardware model version 2 and convert devices
...
This is a squash of the ``collab-hwm`` branch which converts all
in-tree boards to hardware model version 2 including build system
changes, board updates and soc conversions.
This squash is a combination of the following commits:
ca214745a1 soc: Remove soc_legacy folder and move ARM Kconfig
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
1 year ago
Tamas Jozsi
Fabio Baltieri
TOKITA Hiroshi
Filip Kokosinski
Yishai Jaffe
Benjamin Cabé
Aksel Skauge Mellbye
Declan Snyder
Carles Cufi
Stephanos Ioannidis
Anant Thazhemadam
Daniel Fuchs
Andrew Featherstone
Johan Hedberg
Jamie McCrae
Teresa Zepeda Ventura
Johann Fischer
Pisit Sawangvonganan
Jordan Yates
Gerard Marull-Paretas
Jeronimo Agullo
Daniel Irekvist
David Brown
Torsten Rasmussen