You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
54 lines
1.1 KiB
54 lines
1.1 KiB
.. zephyr:board:: kb1200_evb |
|
|
|
Overview |
|
******** |
|
|
|
The KB1200_EVB kit is a development platform to evaluate the |
|
ENE KB1200 series microcontrollers. This board needs to be mated with |
|
part number KB1200. |
|
|
|
|
|
Hardware |
|
******** |
|
|
|
- ARM Cortex-M4F Processor |
|
- 512KB Flash and 320KB RAM |
|
- ADC & GPIO headers |
|
- SER1, SER2 and SER3 |
|
- FAN PWM interface |
|
- ENE Debug interface |
|
|
|
Supported Features |
|
================== |
|
|
|
.. zephyr:board-supported-hw:: |
|
|
|
System Clock |
|
============ |
|
|
|
The KB1200 MCU is configured to use the 96Mhz internal oscillator with the |
|
on-chip DPLL to generate a resulting EC clock rate of 96MHz/48MHz/24MHz/12MHz. |
|
See Processor clock control register (refer 5.1 General Configuration) |
|
|
|
Programming and Debugging |
|
************************* |
|
|
|
.. zephyr:board-supported-runners:: |
|
|
|
Flashing |
|
======== |
|
|
|
If the correct headers are installed, this board supports SWD Debug Interface. |
|
|
|
To flash with SWD, install the drivers for your programmer, for example: |
|
SEGGER J-link's drivers are at https://www.segger.com/downloads/jlink/ |
|
|
|
Debugging |
|
========= |
|
|
|
Use SWD with a J-Link |
|
|
|
References |
|
========== |
|
|
|
.. target-notes::
|
|
|