Instead of hard coding some random value to layer code, use the
code that is registered in net_mgmt.h
This way it is easier to keep track of used layer codes in the
future, and we also allow out-of-tree components a way to avoid
allocating same layer code to in-tree-source code.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The _ is a reserved character in front of the symbols so remove
it from network management event macros. The remaining string
without the _ will identify the network API anyway so having
underscore there is not needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Added IW416 SoC support to enable Bluetooth HCI driver perform
firmware load, and works with blueooth HCI interface.
Removed cmake file from bt_controller/, added support in hal_nxp
module to fetch firmware blobs for iW416/nw612 BT Only FW.
Signed-off-by: Nirav Agrawal <nirav.agrawal@nxp.com>
In some cases, pixel inversion is managed by the display hardware
and software inversion is not required.
Signed-off-by: Robin-Charles Guihéneuf <robin-charles@hotmail.fr>
For simplicity/consistency with many other soc families, rename the
bouffalolab_bflb soc family to the simpler bflb.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The CH32V003 CPU is a QingKe V2A while others in the CH32V00x series
use the QingKe V2C. Prepare for adding support for the CH32V006 moving
to the more specifc qingke-v2a, moving some cases of SOC_CH32V003
actually meaning SOC_FAMILY_QINGKE_V2A.
Signed-off-by: Michael Hope <michaelh@juju.nz>
Changes for this package version:
* CTRLSEL is now set appropriately for the SPIS121 pins.
* DPPI.LINK configuration is now skipped when processing
the 'dppic130' devicetree node.
Signed-off-by: Jonathan Nilsen <jonathan.nilsen@nordicsemi.no>
These are applicable for Wi-Fi over QSPI (nRF7002DK) or Flash over QSPI
(nRF52/53 + nRF7002EK) and as most Wi-Fi samples run on 128MHz (for
performance), disable the anomalies for both.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Instead of relying on a hardcoded list of valid strings, automatically
create a perfectly sized array of disk names from devicetree.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Background:
In DPP hostapd will put more than 1K bytes text in multiple
wpa_msg calls in one loop. This will drain hostapd monitor
socket pair and fail. Thus DPP connection will fail.
The monitor socket pair of wpa_supplicant and hostapd are not like
ctrl_iface socket pair, which are used for sending command to
hostap from other tasks. The monitor socket pair is used by wpa_msg
to send messages to attatched ctrl_iface monitors. But in zephyr case,
the monitor is hostap task itself.
This means hostap task is both the sender and receiver task.
So it writes all the wpa_msg text into FIFO and read it in next loop.
So there is risk of draining socket pair FIFO and missing msg.
And the reading socket loop can be omitted by directly handling msg
in wpa_msg_cb.
Linux uses monitor socket pair because hostap is a process and wpa_msg
does cross-process communication.
But zephyr hostap is used as module in the same binary with
zephyr kernel.
So the usage is different and we don't need to use socket pair to
notify ctrl_iface monitors.
As long as we don't do time-consuming process in zephyr_wpa_msg_cb,
it won't affect hostap task.
So the zephyr_wpa_msg_cb will only filter and restore interesting logs,
or raise mgmt events to wifi l2 mgmt task.
Fix:
Remove socket send flow in wpa_msg.
Directly filter and handle text in zephyr_wpa_msg_cb,
coding in zephyr repo.
This will save 2K RAM in supplicant case and 4K RAM in
supplicant & hostapd coex case, in current default hostap
socket pair config.
And this will save max 50% loops of hostap task.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Add Bouffalo Lab serial driver. The driver uses pinctrl to configure
pins and have power management capabilities.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Moved OpenThread-related Kconfigs from L2 layer to
modules/openthread. All of those configs were not strictly related
to the L2 layer, so they fits better to OpenThread module.
This operation allows using OpenThread Kconfigs even if L2 layer is
disabled.
Enabling NET_L2_OPENTHREAD also configures those configs by
selecting the OPENTHREAD kconfig, so there is no change regarding
backwards compatibility. The only change is that the Kconfigs
related to Thread were moved to the modules space, so their
location in the menuconfig also changed.
Once it is done, a choice for setting different L2 implementations
seems to be redundant.
Signed-off-by: Arkadiusz Balys <arkadiusz.balys@nordicsemi.no>
Introduce NXP NCNano driver using MIPI DBI class. This peripheral
supports 8080 and 6800 mode. The driver also supports used with
nxp,mipi_dsi_2l driver, for the panel with DPHY bus, such as g1120b0mipi.
Signed-off-by: Kate Wang <yumeng.wang@nxp.com>
- The fsl_common_dsp driver needs to be loaded
when building xtensa projects and the fsl_common_arm
driver needs to be loaded when building arm projects.
- Add a condition to load power driver, because the power
driver is needed to build RT700 arm core project, but it
is not needed to build hifi core project.
Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
Memory allocations in HAL are using data pool. These operations
are in control plane. Add APIs for allocation/free operations on
control pool.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Make the IOVDD settling delay configurable, instead of hardcoding a
delay that happens to work for the dev kits. For example, the nPM1300
load switches have a soft-start time of 1.8 ms.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This adds the nrf54l15dk/nrf54l10/cpuapp/ns board variant to
Zephyr. It allows to build applications for this target.
This is an initial support for the non secure target which allows
building and running tfm_ipc and config_build.
This is NOT full support of the non secure target in upstream
Zephyr.
There are important limitations, such as:
- The hardware Crypto accelerator is not supported and thus the non
secur target is NOT secure for production applications in upstream
Zephyr.
- The BL2 is not supported, so no DFU is supported with this support
Most of the code changes here are taken from nRF Connect SDK
in order to avoid having noups there.
Signed-off-by: Georgios Vasilakis <georgios.vasilakis@nordicsemi.no>
Update the header to include a generic header for the NRF54L
series and not a specific one for the NRF54L15.
Signed-off-by: Georgios Vasilakis <georgios.vasilakis@nordicsemi.no>
- In middleware/CMakeLists.txt, using add_subdirectory()
to load the cmakelists.txt under bt_controller will
result in the bt_controller directory not being found
correctly, because the starting point of the query
is mcux-sdk-ng/CMakeLists.txt. Need to add
${CMAKE_CURRENT_LIST_DIR} to bt_controller to correctly
locate the folder.
Signed-off-by: Zhaoxiang Jin <Zhaoxiang.Jin_1@nxp.com>
Verify return values for otPlatRadio* functions and log the error
accordingly. For otPlatRadioTransmit() case, just log the error
and let the entire TX procedure proceed on the next timeout.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The CMakeLists.txt files in folders modules/hal_nxp/mcux/mcux-sdk-ng/*/
are loaded in modules/hal_nxp/mcux/mcux-sdk-ng/CMakeLists.txt using
cmake function `add_subdirectory`.
One issue is, when variables defined in one CMakeLists.txt are needed
by another CMakeLists.txt, then the variables need be exposed to parent
scope. This is not convenient.
Another issue is, to expose variables, the function `set_variable_ifdef`
sets the variables as global variables. The CMake global variables
named `CONFIG_xxx` will be collected by Kconfig, and results in build
fail.
The solution is:
1. Replace `add_subdirectory` with `include`, so that the variables will
be in the same file scope, don't need to expose them.
2. Modify the implementation of `set_variable_ifdef`, don't set
variables as global variables.
Resolves#88135
Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
Created new files and relocate hostapd support code in glue layer to new
files. The new files will be compiled only if hostapd support is enabled.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Fixes an issue where pinctrl psel properties encoded with
NRF_PSEL_DISCONNECTED() caused a build failure.
Signed-off-by: Jonathan Nilsen <jonathan.nilsen@nordicsemi.no>
MCUboot has a configuration for single application slot RAM loading, in
which the single loader (or a hook thereof) can load an application from
an arbitrary flash location to RAM. Applications that are to be loaded
in this way need to specify, in their mcuboot header, the load address
in RAM they are meant to be loaded.
This patch adds a new Kconfig for this mode. The load address used comes
from devicetree chosen property "mcuboot,ram-load-dev", if it exists,
and if not, "zephyr,sram".
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
This adds the nrf54l15dk/nrf54l15/cpuapp/ns board variant to
Zephyr. It allows to build applications for this target.
This is an initial support for the non secure target which allows
building and running tfm_ipc and config_build.
This is NOT full support of the non secure target in upstream
Zephyr.
There are important limitations, such as:
- The hardware Crypto accelerator is not supported and thus the non
secur target is NOT secure for production applicatiions in upstream
Zephyr.
- The BL2 is not supported, so no DFU is supported with this support
Most of the code chagnes here are taken from nRF Connect SDK
in order to avoid having noups there.
Signed-off-by: Georgios Vasilakis <georgios.vasilakis@nordicsemi.no>
The Zephyr base variable is not used below and also is deprecated and
not needed to be set.
Fixes#87950.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add support for processing the Fault Status Registers and recoverable
data abort for the cortex A7.
Based on Cortex-A7 MPCore Technical Reference Manual (ARM DDI 0406).
(see https://developer.arm.com/documentation/ddi0406)
Signed-off-by: Julien Racki <julien.racki@st.com>
In order to support higher frequencies than 8MHz, we need to implement
frequency switching while waking up the RPU, as it has to be done only
at 8MHz, once RPU is awake, we can switch back to the configured (DTS)
frequency.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Disable automatic LFCLK selection for GRTC during driver initialization.
For Zephyr applications it is selected by `sys_clock_driver_init()`
depending on configuration and DTS.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Add missing entry for DAI_NXP_MICFIL, which was accidentally removed
during the transition to SDK-NG.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
The new SDK-NG is missing some EDMA-related headers/drivers because of
which the 'dma_nxp_edma' driver no longer compiles with it. Mark the new
SDK as unsupported for this platform until this is fixed.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
This uses the network packet as is without the need for a copy all the
way till the packet is handed over to RPU.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Increase stack size of supplicant thread to fix crash seen during
enterprise mode connection. Increase heap requirement of hostap
to handle TLS processing failures.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Jukka Rissanen
Nirav Agrawal
Robin-Charles Guihéneuf
Benjamin Cabé
Michael Hope
Jonathan Nilsen
Chaitanya Tata
Jordan Yates
Fengming Ye
Gerson Fernando Budke
Arkadiusz Balys
Kate Wang
Zhaoxiang Jin
Hao Luo
Sreeram Tatapudi
Ravi Dondaputi
Przemyslaw Bida
Georgios Vasilakis
Robert Lubos
Jason Yu
Hui Bai
Ederson de Souza
Remi Buisson
Julien Racki
Khanh Nguyen
S Mohamed Fiaz
Quang Le
Adam Kondraciuk
Laurentiu Mihalcea