boards: arm: mps2: Convert to v2

Converts the board to hwmv2

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>

boards/arm/mps2/CMakeLists.txt

@@ -1,18 +1,13 @@
-#
-# Copyright (c) 2019,2020 Linaro Limited
-#
 # SPDX-License-Identifier: Apache-2.0
-#
 
 zephyr_library()
 zephyr_library_sources(pinmux.c)
 
-if(CONFIG_SOC_MPS2_AN521_CPU1 AND NOT CONFIG_OPENAMP)
+if(CONFIG_BOARD_MPS2_AN521_CPU1 AND NOT CONFIG_OPENAMP)
   # Building a firmware image for CPU1: this requires a binary
   # for CPU0, which will boot the device and wake up CPU1.
   # However, if building with OPENAMP, there is no need to build
   # any binary for CPU0, as this is built by the dual core sample.
-
   set(CPU0_BINARY_DIR ${BOARD_DIR}/empty_cpu0-prefix/src/empty-cpu0-build/zephyr)
 
   include(ExternalProject)
@@ -21,9 +16,8 @@ if(CONFIG_SOC_MPS2_AN521_CPU1 AND NOT CONFIG_OPENAMP)
     empty_cpu0
     SOURCE_DIR ${BOARD_DIR}/empty_cpu0
     INSTALL_COMMAND  ""
-    CMAKE_CACHE_ARGS -DBOARD:STRING=mps2_an521
+    CMAKE_CACHE_ARGS -DBOARD:STRING=${BOARD}/an521/cpu0
     BUILD_BYPRODUCTS "${CPU0_BINARY_DIR}/${KERNEL_BIN_NAME}"
     BUILD_ALWAYS True
   )
-
 endif()

boards/arm/mps2/Kconfig

@@ -1,8 +1,6 @@
 # Copyright (c) 2017 Linaro Limited
 # SPDX-License-Identifier: Apache-2.0
 
-config BOARD_MPS2_AN385
-	bool "ARM Cortex-M3 SMM on V2M-MPS2 (Application Note AN385)"
-	depends on SOC_MPS2_AN385
+config BOARD_MPS2
 	select QEMU_TARGET
 	select HAS_COVERAGE_SUPPORT

boards/arm/mps2/Kconfig.defconfig

@@ -1,6 +1,39 @@
-# Copyright (c) 2018-2019 Linaro Limited
+# Copyright (c) 2017 Linaro Limited
 # SPDX-License-Identifier: Apache-2.0
 
+if BOARD_MPS2_AN385
+
+if SERIAL
+
+config UART_INTERRUPT_DRIVEN
+	default y
+
+endif # SERIAL
+
+config ZTEST_STACK_SIZE
+	default 4096 if ZTEST
+
+if COVERAGE_GCOV
+
+config MAIN_STACK_SIZE
+	default 4096
+
+config IDLE_STACK_SIZE
+	default 4096
+
+config PRIVILEGED_STACK_SIZE
+	default 4096
+
+config ISR_STACK_SIZE
+	default 4096
+
+config TEST_EXTRA_STACK_SIZE
+	default 4096
+
+endif # COVERAGE_GCOV
+
+endif
+
 if BOARD_MPS2_AN521_CPU0 || BOARD_MPS2_AN521_CPU0_NS || BOARD_MPS2_AN521_CPU1
 
 # MPU-based null-pointer dereferencing detection cannot
@@ -9,19 +42,14 @@ if BOARD_MPS2_AN521_CPU0 || BOARD_MPS2_AN521_CPU0_NS || BOARD_MPS2_AN521_CPU1
 choice NULL_POINTER_EXCEPTION_DETECTION
 	bool
 	default NULL_POINTER_EXCEPTION_DETECTION_NONE if QEMU_TARGET
-endchoice
 
-config BOARD
-	default "mps2_an521_ns" if TRUSTED_EXECUTION_NONSECURE
-	default "mps2_an521_remote" if BOARD_MPS2_AN521_CPU1
-	default "mps2_an521"
+endchoice
 
 # By default, if we build for a Non-Secure version of the board,
 # force building with TF-M as the Secure Execution Environment.
 config BUILD_WITH_TFM
 	default y if TRUSTED_EXECUTION_NONSECURE
 
-
 if SERIAL
 
 config UART_INTERRUPT_DRIVEN

boards/arm/mps2/Kconfig.mps2

@@ -0,0 +1,8 @@
+# Copyright (c) 2017 Linaro Limited
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_MPS2
+	select SOC_MPS2_AN385 if BOARD_MPS2_AN385
+	select SOC_MPS2_AN521_CPU0 if BOARD_MPS2_AN521_CPU0
+	select SOC_MPS2_AN521_CPU0 if BOARD_MPS2_AN521_CPU0_NS
+	select SOC_MPS2_AN521_CPU1 if BOARD_MPS2_AN521_CPU1

boards/arm/mps2/board.cmake

@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: Apache-2.0
+
+set(SUPPORTED_EMU_PLATFORMS qemu)
+
+if(CONFIG_BOARD_MPS2_AN385)
+  set(QEMU_CPU_TYPE_${ARCH} cortex-m3)
+  set(QEMU_FLAGS_${ARCH}
+    -cpu ${QEMU_CPU_TYPE_${ARCH}}
+    -machine mps2-an385
+    -nographic
+    -vga none
+    )
+elseif(CONFIG_BOARD_MPS2_AN521_CPU0 OR CONFIG_BOARD_MPS2_AN521_CPU0_NS OR CONFIG_BOARD_MPS2_AN521_CPU1)
+  set(QEMU_CPU_TYPE_${ARCH} cortex-m33)
+  set(QEMU_FLAGS_${ARCH}
+    -cpu ${QEMU_CPU_TYPE_${ARCH}}
+    -machine mps2-an521
+    -nographic
+    -m 16
+    -vga none
+    )
+endif()
+
+board_set_debugger_ifnset(qemu)
+
+if(CONFIG_BOARD_MPS2_AN521_CPU0 OR CONFIG_BOARD_MPS2_AN521_CPU0_NS OR CONFIG_BOARD_MPS2_AN521_CPU1)
+  # To enable a host tty switch between serial and pty
+  #  -chardev serial,path=/dev/ttyS0,id=hostS0
+  list(APPEND QEMU_EXTRA_FLAGS -chardev pty,id=hostS0 -serial chardev:hostS0)
+
+  if(CONFIG_BUILD_WITH_TFM)
+    # Override the binary used by qemu, to use the combined
+    # TF-M (Secure) & Zephyr (Non Secure) image (when running
+    # in-tree tests).
+    set(QEMU_KERNEL_OPTION "-device;loader,file=${CMAKE_BINARY_DIR}/zephyr/tfm_merged.hex")
+  elseif(CONFIG_OPENAMP)
+    set(QEMU_EXTRA_FLAGS "-device;loader,file=${REMOTE_ZEPHYR_DIR}/zephyr.elf")
+  elseif(CONFIG_BOARD_MPS2_AN521_CPU1)
+    set(CPU0_BINARY_DIR ${CMAKE_CURRENT_BINARY_DIR}/zephyr/boards/arm/mps2/empty_cpu0-prefix/src/empty_cpu0-build/zephyr)
+    set(QEMU_KERNEL_OPTION "-device;loader,file=${CPU0_BINARY_DIR}/zephyr.elf")
+    list(APPEND QEMU_EXTRA_FLAGS "-device;loader,file=${PROJECT_BINARY_DIR}/${KERNEL_ELF_NAME}")
+  endif()
+endif()

boards/arm/mps2/board.yml

@@ -0,0 +1,9 @@
+board:
+  name: mps2
+  vendor: ARM
+  socs:
+  - name: an385
+  - name: an521
+    variants:
+    - name: ns
+      cpucluster: cpu0

boards/arm/mps2/doc/mps2_an385.rst

@@ -6,7 +6,7 @@ ARM V2M MPS2
 Overview
 ********
 
-The mps2_an385 board configuration is used by Zephyr applications that run on
+The mps2/an385 board configuration is used by Zephyr applications that run on
 the V2M MPS2 board. It provides support for the ARM Cortex-M3 (AN385) CPU and
 the following devices:
 
@@ -62,7 +62,7 @@ ARM V2M MPS2 provides the following hardware components:
 Supported Features
 ==================
 
-The mps2_an385 board configuration supports the following hardware features:
+The mps2/an385 board configuration supports the following hardware features:
 
 +-----------+------------+-------------------------------------+
 | Interface | Controller | Driver/Component                    |
@@ -87,11 +87,8 @@ Other hardware features are not currently supported by the port.
 See the `V2M MPS2 Website`_ for a complete list of V2M MPS2 board hardware
 features.
 
-The default configuration can be found in the defconfig file:
-
-.. code-block:: console
-
-   boards/arm/mps2_an385/mps2_an385_defconfig
+The default configuration can be found in
+:zephyr_file:`boards/arm/mps2/mps2_an385_defconfig`
 
 Interrupt Controller
 ====================
@@ -260,7 +257,7 @@ Here is an example for the :ref:`hello_world` application.
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
-   :board: mps2_an385
+   :board: mps2/an385
    :goals: build
 
 Connect the V2M MPS2 to your host computer using the USB port and you should

boards/arm/mps2/doc/mps2_an521.rst

@@ -6,7 +6,7 @@ ARM MPS2+ AN521
 Overview
 ********
 
-The mps2_an521 board configuration is used by Zephyr applications that run
+The mps2/an521 board configuration is used by Zephyr applications that run
 on the MPS2+ AN521 board. It provides support for the MPS2+ AN521 ARM Cortex-M33
 CPU and the following devices:
 
@@ -44,11 +44,11 @@ The BOARD options are summarized below:
 +----------------------+-------------------------------------------------------+
 | BOARD                | Description                                           |
 +======================+=======================================================+
-| mps2_an521           | For building Secure (or Secure-only) firmware on CPU0 |
+| mps2/an521/cpu0      | For building Secure (or Secure-only) firmware on CPU0 |
 +----------------------+-------------------------------------------------------+
-| mps2_an521_ns        | For building Non-Secure firmware for CPU0             |
+| mps2/an521/cpu0/ns   | For building Non-Secure firmware for CPU0             |
 +----------------------+-------------------------------------------------------+
-| mps2_an521_remote    | For building firmware on CPU1                         |
+| mps2/an521/cpu1      | For building firmware on CPU1                         |
 +----------------------+-------------------------------------------------------+
 
 Memory Partitioning
@@ -63,17 +63,17 @@ The following memory map and partitioning schemes are used by default, where
 the offset value is the offset from the base of the 4MB code or SRAM block,
 ignoring the S/NS alias difference.
 
-+-------------------+-----+----------------+----------------+------------+
++-------------------------+-----+----------------+----------------+------------+
 | Board                   | CPU | Code (Offset)  | SRAM (Offset)  | S/NS Alias |
-+===================+=====+================+================+============+
-| mps2_an521        | 0   | 4MB (0)        | 4MB (0)        | S          |
-+-------------------+-----+----------------+----------------+------------+
-| mps2_an521_ns     | 0   | 512KB (1MB)    | 512KB (1MB)    | NS         |
-+-------------------+-----+----------------+----------------+------------+
-| mps2_an521_remote | 1   | 468KB (3628KB) | 512KB (1.5MB)  | NS         |
-+-------------------+-----+----------------+----------------+------------+
-
-The ``mps2_an521_ns`` board target is intended to be used with TF-M, with the
++=========================+=====+================+================+============+
+| mps2/an521/cpu0    | 0   | 4MB (0)        | 4MB (0)        | S          |
++-------------------------+-----+----------------+----------------+------------+
+| mps2/an521/cpu0/ns | 0   | 512KB (1MB)    | 512KB (1MB)    | NS         |
++-------------------------+-----+----------------+----------------+------------+
+| mps2/an521/cpu1    | 1   | 468KB (3628KB) | 512KB (1.5MB)  | NS         |
++-------------------------+-----+----------------+----------------+------------+
+
+The ``mps2/an521/cpu0/ns`` board target is intended to be used with TF-M, with the
 Zephyr memory map matching the AN521 memory map defined upstream in TF-M. TF-M
 boots the secure processing environment before initialising Zephyr in the
 non-secure processing environment. The non-secure Zephyr image is offset to
@@ -81,7 +81,7 @@ make room for the secure bootloader, and the secure firmware (TF-M), resulting
 in a starting address of 0x00100000. SRAM begins with a 1MB offset at
 0x28100000.
 
-The ``mps2_an521_remote`` board target is setup for the second core on the
+The ``mps2/an521/cpu1`` board target is setup for the second core on the
 AN521, using the final 468KB code memory in the 4MB code block. This value
 is chosen to maintain compatibility with TF-M, which marks that final 468KB
 code region as ``Unused``. Code memory thus starts with an offset of
@@ -92,9 +92,9 @@ This memory map enables the two alternative board targets to be used together
 if required, at the cost of reducing the amount of code memory available on
 the second core to the worst-case scenario from TF-M.
 
-When using one of the alternative board targets (``mps2_an521_ns`` or
-``mps2_an521_remote``), care needs to be taken with the amount of code or
-SRAM memory used on the primary board target (``mps2_an521``) since there is
+When using one of the alternative board targets (``mps2/an521/cpu0/ns`` or
+``mps2/an521/cpu1``), care needs to be taken with the amount of code or
+SRAM memory used on the primary board target (``mps2/an521``) since there is
 some overlap in the memory maps.
 
 Hardware
@@ -140,7 +140,7 @@ ARM MPS2+ AN521 provides the following hardware components:
 User push buttons
 =================
 
-The mps2_an521 board provides the following user push buttons:
+The mps2/an521 board provides the following user push buttons:
 
 - ON power on
 - nSRST: Cortex-M33 system reset and CoreSight debug reset
@@ -150,7 +150,7 @@ The mps2_an521 board provides the following user push buttons:
 Supported Features
 ===================
 
-The mps2_an521 board configuration supports the following hardware features:
+The mps2/an521 board configuration supports the following hardware features:
 
 +-----------+------------+-------------------------------------+
 | Interface | Controller | Driver/Component                    |
@@ -175,8 +175,8 @@ Other hardware features are not currently supported by the port.
 See the `MPS2 FPGA Website`_ for a complete list of MPS2+ AN521 board hardware
 features.
 
-The default configuration can be found in the defconfig file:
-``boards/arm/mps2_an521/mps2_an521_defconfig``.
+The default configuration can be found in
+:zephyr_file:`boards/arm/mps2/mps2_an521_cpu0_defconfig`.
 
 Interrupt Controller
 ====================
@@ -385,7 +385,7 @@ Programming and Debugging
 *************************
 
 MPS2+ AN521 (CPU0) supports the Armv8m Security Extension.
-Applications built for the mps2_an521 board by default
+Applications built for the mps2/an521 board by default
 boot in the Secure state.
 
 MPS2+ AN521 (CPU1) does not support the Armv8m Security Extension.
@@ -410,7 +410,7 @@ The process to build the Secure firmware image using TF-M and the Non-Secure
 firmware image using Zephyr requires the following steps:
 
 1. Build the Non-Secure Zephyr application
-   for MPS2+ AN521 (CPU0) using ``-DBOARD=mps2_an521_ns``.
+   for MPS2+ AN521 (CPU0) using ``-DBOARD=mps2/an521/cpu0/ns``.
    To invoke the building of TF-M the Zephyr build system requires the
    Kconfig option ``BUILD_WITH_TFM`` to be enabled, which is done by
    default when building Zephyr as a Non-Secure application.
@@ -434,18 +434,18 @@ The process to build the Secure and the Non-Secure firmware images
 using Zephyr requires the following steps:
 
 1. Build the Secure Zephyr application for MPS2+ AN521 (CPU0)
-   using ``-DBOARD=mps2_an521`` and
+   using ``-DBOARD=mps2/an521`` and
    ``CONFIG_TRUSTED_EXECUTION_SECURE=y`` and ``CONFIG_BUILD_WITH_TFM=n``
    in the application project configuration file.
 2. Build the Non-Secure Zephyr application for MPS2+ AN521 (CPU0)
-   using ``-DBOARD=mps2_an521_ns``.
+   using ``-DBOARD=mps2/an521/cpu0/ns``.
 3. Merge the two binaries together.
 
 Building a Secure only application on MPS2+ AN521 (CPU0)
 ========================================================
 
 Build the Zephyr app in the usual way (see :ref:`build_an_application`
-and :ref:`application_run`), using ``-DBOARD=mps2_an521`` for
+and :ref:`application_run`), using ``-DBOARD=mps2/an521`` for
 the firmware running on the MPS2+ AN521 (CPU0).
 
 When building a Secure/Non-Secure application for the MPS2+ AN521 (CPU0),
@@ -472,7 +472,7 @@ Applications may be built for the second Cortex-M33
 (remote) core of MPS2+ AN521. The core is referred to as CPU1.
 
 Build the Zephyr app in the usual way (see :ref:`build_an_application`
-and :ref:`application_run`), using ``-DBOARD=mps2_an521_remote`` for
+and :ref:`application_run`), using ``-DBOARD=mps2/an521/cpu1`` for
 the firmware running on the MPS2+ AN521 (CPU1).
 
 The Zephyr build will automatically trigger building a minimal (empty)
@@ -494,7 +494,7 @@ a secure-only application for CPU0.
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
-   :board: mps2_an521
+   :board: mps2/an521
    :goals: build
 
 

boards/arm/mps2/mps2_an385.yaml

@@ -1,4 +1,4 @@
-identifier: mps2_an385
+identifier: mps2/an385
 name: ARM V2M MPS2
 type: mcu
 arch: arm

boards/arm/mps2/mps2_an385_defconfig

@@ -4,9 +4,6 @@
 # SPDX-License-Identifier: Apache-2.0
 #
 
-CONFIG_SOC_SERIES_MPS2=y
-CONFIG_SOC_MPS2_AN385=y
-CONFIG_BOARD_MPS2_AN385=y
 CONFIG_RUNTIME_NMI=y
 CONFIG_QEMU_ICOUNT_SHIFT=7
 

boards/arm/mps2/mps2_an521_cpu0.yaml

@@ -1,4 +1,4 @@
-identifier: mps2_an521
+identifier: mps2/an521/cpu0
 name: ARM V2M MPS2-AN521
 type: mcu
 arch: arm

boards/arm/mps2/mps2_an521_cpu0_defconfig

@@ -4,9 +4,6 @@
 # SPDX-License-Identifier: Apache-2.0
 #
 
-CONFIG_SOC_SERIES_MPS2=y
-CONFIG_SOC_MPS2_AN521_CPU0=y
-CONFIG_BOARD_MPS2_AN521_CPU0=y
 CONFIG_RUNTIME_NMI=y
 CONFIG_ARM_TRUSTZONE_M=y
 CONFIG_ARM_MPU=y

boards/arm/mps2/mps2_an521_cpu0_ns.yaml

@@ -1,4 +1,4 @@
-identifier: mps2_an521_ns
+identifier: mps2/an521/cpu0/ns
 name: ARM V2M MPS2-AN521_ns
 type: mcu
 arch: arm

boards/arm/mps2/mps2_an521_cpu0_ns_defconfig

@@ -0,0 +1,11 @@
+#
+# Copyright (c) 2018-2019 Linaro Limited
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+
+CONFIG_QEMU_ICOUNT_SHIFT=6
+
+# Build a non-secure firmware image
+CONFIG_TRUSTED_EXECUTION_SECURE=n
+CONFIG_TRUSTED_EXECUTION_NONSECURE=y

boards/arm/mps2/mps2_an521_cpu1.yaml

@@ -1,5 +1,5 @@
-identifier: mps2_an521_remote
-name: ARM V2M MPS2-AN521_remote
+identifier: mps2/an521/cpu1
+name: ARM V2M MPS2-AN521_cpu1
 type: mcu
 arch: arm
 ram: 512

boards/arm/mps2/mps2_an521_cpu1_defconfig

@@ -5,9 +5,6 @@
 # SPDX-License-Identifier: Apache-2.0
 #
 
-CONFIG_SOC_SERIES_MPS2=y
-CONFIG_SOC_MPS2_AN521_CPU1=y
-CONFIG_BOARD_MPS2_AN521_CPU1=y
 CONFIG_RUNTIME_NMI=y
 CONFIG_ARM_MPU=y
 CONFIG_QEMU_ICOUNT_SHIFT=7

boards/boards_legacy/arm/mps2_an385/CMakeLists.txt

@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-
-zephyr_library()
-zephyr_library_sources(pinmux.c)

boards/boards_legacy/arm/mps2_an385/Kconfig.defconfig

@@ -1,38 +0,0 @@
-# Copyright (c) 2017 Linaro Limited
-# SPDX-License-Identifier: Apache-2.0
-
-if BOARD_MPS2_AN385
-
-config BOARD
-	default "mps2_an385"
-
-if SERIAL
-
-config UART_INTERRUPT_DRIVEN
-	default y
-
-endif # SERIAL
-
-config ZTEST_STACK_SIZE
-	default 4096 if ZTEST
-
-if COVERAGE_GCOV
-
-config MAIN_STACK_SIZE
-	default 4096
-
-config IDLE_STACK_SIZE
-	default 4096
-
-config PRIVILEGED_STACK_SIZE
-	default 4096
-
-config ISR_STACK_SIZE
-	default 4096
-
-config TEST_EXTRA_STACK_SIZE
-	default 4096
-
-endif # COVERAGE_GCOV
-
-endif

boards/boards_legacy/arm/mps2_an385/board.cmake

@@ -1,13 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-
-set(SUPPORTED_EMU_PLATFORMS qemu)
-
-set(QEMU_CPU_TYPE_${ARCH} cortex-m3)
-set(QEMU_FLAGS_${ARCH}
-  -cpu ${QEMU_CPU_TYPE_${ARCH}}
-  -machine mps2-an385
-  -nographic
-  -vga none
-  )
-
-board_set_debugger_ifnset(qemu)

boards/boards_legacy/arm/mps2_an521/Kconfig.board

@@ -1,20 +0,0 @@
-# Copyright (c) 2018-2019 Linaro Limited
-# SPDX-License-Identifier: Apache-2.0
-
-config BOARD_MPS2_AN521_CPU0
-	bool "ARM Cortex-M33 SMM on V2M-MPS2 (AN521) (CPU0)"
-	depends on SOC_MPS2_AN521_CPU0
-	select QEMU_TARGET
-	select HAS_COVERAGE_SUPPORT
-
-config BOARD_MPS2_AN521_CPU0_NS
-	bool "ARM Cortex-M33 SMM on V2M-MPS2 (AN521) (CPU0 Non-Secure)"
-	depends on SOC_MPS2_AN521_CPU0
-	select QEMU_TARGET
-	select HAS_COVERAGE_SUPPORT
-
-config BOARD_MPS2_AN521_CPU1
-	bool "ARM Cortex-M33 SMM on V2M-MPS2 (AN521) CPU1"
-	depends on SOC_MPS2_AN521_CPU1
-	select QEMU_TARGET
-	select HAS_COVERAGE_SUPPORT

boards/boards_legacy/arm/mps2_an521/board.cmake

@@ -1,33 +0,0 @@
-# SPDX-License-Identifier: Apache-2.0
-
-set(SUPPORTED_EMU_PLATFORMS qemu)
-
-set(QEMU_CPU_TYPE_${ARCH} cortex-m33)
-set(QEMU_FLAGS_${ARCH}
-  -cpu ${QEMU_CPU_TYPE_${ARCH}}
-  -machine mps2-an521
-  -nographic
-  -m 16
-  -vga none
-  )
-board_set_debugger_ifnset(qemu)
-
-board_runner_args(pyocd "--target=mps2_an521")
-
-include(${ZEPHYR_BASE}/boards/common/pyocd.board.cmake)
- # To enable a host tty switch between serial and pty
- #  -chardev serial,path=/dev/ttyS0,id=hostS0
-list(APPEND QEMU_EXTRA_FLAGS -chardev pty,id=hostS0 -serial chardev:hostS0)
-
-if (CONFIG_BUILD_WITH_TFM)
-  # Override the binary used by qemu, to use the combined
-  # TF-M (Secure) & Zephyr (Non Secure) image (when running
-  # in-tree tests).
-  set(QEMU_KERNEL_OPTION "-device;loader,file=${CMAKE_BINARY_DIR}/zephyr/tfm_merged.hex")
-elseif(CONFIG_OPENAMP)
-  set(QEMU_EXTRA_FLAGS "-device;loader,file=${REMOTE_ZEPHYR_DIR}/zephyr.elf")
-elseif (CONFIG_SOC_MPS2_AN521_CPU1)
-  set(CPU0_BINARY_DIR ${CMAKE_CURRENT_BINARY_DIR}/zephyr/boards/arm/mps2_an521/empty_cpu0-prefix/src/empty_cpu0-build/zephyr)
-  set(QEMU_KERNEL_OPTION "-device;loader,file=${CPU0_BINARY_DIR}/zephyr.elf")
-  list(APPEND QEMU_EXTRA_FLAGS "-device;loader,file=${PROJECT_BINARY_DIR}/${KERNEL_ELF_NAME}")
-endif()

boards/boards_legacy/arm/mps2_an521/mps2_an521_ns_defconfig

@@ -1,22 +0,0 @@
-#
-# Copyright (c) 2018-2019 Linaro Limited
-#
-# SPDX-License-Identifier: Apache-2.0
-#
-
-CONFIG_SOC_SERIES_MPS2=y
-CONFIG_SOC_MPS2_AN521_CPU0=y
-CONFIG_BOARD_MPS2_AN521_CPU0_NS=y
-CONFIG_ARM_TRUSTZONE_M=y
-CONFIG_RUNTIME_NMI=y
-CONFIG_TRUSTED_EXECUTION_NONSECURE=y
-CONFIG_ARM_MPU=y
-CONFIG_QEMU_ICOUNT_SHIFT=6
-
-# GPIOs
-CONFIG_GPIO=y
-
-# Serial
-CONFIG_CONSOLE=y
-CONFIG_UART_CONSOLE=y
-CONFIG_SERIAL=y

boards/boards_legacy/arm/mps2_an521/pinmux.c

@@ -1,164 +0,0 @@
-/*
- * Copyright (c) 2018-2019 Linaro Limited
- *
- * SPDX-License-Identifier: Apache-2.0
- */
-
-#include <zephyr/device.h>
-#include <zephyr/init.h>
-#include <zephyr/kernel.h>
-#include <soc.h>
-#include <zephyr/sys/sys_io.h>
-#include <zephyr/drivers/gpio/gpio_cmsdk_ahb.h>
-
-/**
- * @brief Pinmux driver for ARM MPS2 AN521 Board
- *
- * The ARM MPS2 AN521 Board has 4 GPIO controllers. These controllers
- * are responsible for pin muxing, input/output, pull-up, etc.
- *
- * All GPIO controller pins are exposed via the following sequence of pin
- * numbers:
- *   Pins  0 -  15 are for GPIO0
- *   Pins 16 -  31 are for GPIO1
- *   Pins 32 -  47 are for GPIO2
- *   Pins 48 -  51 are for GPIO3
- *
- * For the GPIO controllers configuration ARM MPS2 AN521 Board follows the
- * Arduino compliant pin out.
- */
-
-#define CMSDK_AHB_GPIO0_DEV \
-	((volatile struct gpio_cmsdk_ahb *)DT_REG_ADDR(DT_NODELABEL(gpio0)))
-#define CMSDK_AHB_GPIO1_DEV \
-	((volatile struct gpio_cmsdk_ahb *)DT_REG_ADDR(DT_NODELABEL(gpio1)))
-#define CMSDK_AHB_GPIO2_DEV \
-	((volatile struct gpio_cmsdk_ahb *)DT_REG_ADDR(DT_NODELABEL(gpio2)))
-#define CMSDK_AHB_GPIO3_DEV \
-	((volatile struct gpio_cmsdk_ahb *)DT_REG_ADDR(DT_NODELABEL(gpio3)))
-
-/*
- * This is the mapping from the ARM MPS2 AN521 Board pins to GPIO
- * controllers.
- *
- * D0 : EXT_0
- * D1 : EXT_4
- * D2 : EXT_2
- * D3 : EXT_3
- * D4 : EXT_1
- * D5 : EXT_6
- * D6 : EXT_7
- * D7 : EXT_8
- * D8 : EXT_9
- * D9 : EXT_10
- * D10 : EXT_12
- * D11 : EXT_13
- * D12 : EXT_14
- * D13 : EXT_11
- * D14 : EXT_15
- * D15 : EXT_5
- * D16 : EXT_16
- * D17 : EXT_17
- * D18 : EXT_18
- * D19 : EXT_19
- * D20 : EXT_20
- * D21 : EXT_21
- * D22 : EXT_22
- * D23 : EXT_23
- * D24 : EXT_24
- * D25 : EXT_25
- * D26 : EXT_26
- * D27 : EXT_30
- * D28 : EXT_28
- * D29 : EXT_29
- * D30 : EXT_27
- * D31 : EXT_32
- * D32 : EXT_33
- * D33 : EXT_34
- * D34 : EXT_35
- * D35 : EXT_36
- * D36 : EXT_38
- * D37 : EXT_39
- * D38 : EXT_40
- * D39 : EXT_44
- * D40 : EXT_41
- * D41 : EXT_31
- * D42 : EXT_37
- * D43 : EXT_42
- * D44 : EXT_43
- * D45 : EXT_45
- * D46 : EXT_46
- * D47 : EXT_47
- * D48 : EXT_48
- * D49 : EXT_49
- * D50 : EXT_50
- * D51 : EXT_51
- *
- * UART_3_RX : D0
- * UART_3_TX : D1
- * SPI_3_CS : D10
- * SPI_3_MOSI : D11
- * SPI_3_MISO : D12
- * SPI_3_SCLK : D13
- * I2C_3_SDA : D14
- * I2C_3_SCL : D15
- * UART_4_RX : D26
- * UART_4_TX : D30
- * SPI_4_CS : D36
- * SPI_4_MOSI : D37
- * SPI_4_MISO : D38
- * SPI_4_SCK : D39
- * I2C_4_SDA : D40
- * I2C_4_SCL : D41
- *
- */
-static void arm_mps2_pinmux_defaults(void)
-{
-	uint32_t gpio_0 = 0;
-	uint32_t gpio_1 = 0;
-	uint32_t gpio_2 = 0;
-
-	/* Set GPIO Alternate Functions */
-
-	gpio_0 = (1<<0)   /* Shield 0 UART 3 RXD */
-	       | (1<<4)   /* Shield 0 UART 3 TXD */
-	       | (1<<5)   /* Shield 0 I2C SCL SBCON2 */
-	       | (1<<15)  /* Shield 0 I2C SDA SBCON2 */
-	       | (1<<11)  /* Shield 0 SPI 3 SCK */
-	       | (1<<12)  /* Shield 0 SPI 3 SS */
-	       | (1<<13)  /* Shield 0 SPI 3 MOSI */
-	       | (1<<14); /* Shield 0 SPI 3 MISO */
-
-	CMSDK_AHB_GPIO0_DEV->altfuncset = gpio_0;
-
-	gpio_1 = (1<<10) /* Shield 1 UART 4 RXD */
-	       | (1<<14) /* Shield 1 UART 4 TXD */
-	       | (1<<15) /* Shield 1 I2C SCL SBCON3 */
-	       | (1<<0)  /* ADC SPI 2 SS */
-	       | (1<<1)  /* ADC SPI 2 MISO */
-	       | (1<<2)  /* ADC SPI 2 MOSI */
-	       | (1<<3)  /* ADC SPI 2 SCK */
-	       | (1<<5)  /* USER BUTTON 0 */
-	       | (1<<6); /* USER BUTTON 1 */
-
-	CMSDK_AHB_GPIO1_DEV->altfuncset = gpio_1;
-
-	gpio_2 = (1<<9)   /* Shield 1 I2C SDA SBCON3 */
-	       | (1<<6)   /* Shield 1 SPI 4 SS */
-	       | (1<<7)   /* Shield 1 SPI 4 MOSI */
-	       | (1<<8)   /* Shield 1 SPI 4 MISO */
-	       | (1<<12); /* Shield 1 SPI 4 SCK */
-
-	CMSDK_AHB_GPIO2_DEV->altfuncset = gpio_2;
-}
-
-static int arm_mps2_pinmux_init(void)
-{
-
-	arm_mps2_pinmux_defaults();
-
-	return 0;
-}
-
-SYS_INIT(arm_mps2_pinmux_init, PRE_KERNEL_1,
-	 CONFIG_KERNEL_INIT_PRIORITY_DEFAULT);

soc/arm/mps2/CMakeLists.txt

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: Apache-2.0
 
-zephyr_sources(
-  soc.c
-  )
+zephyr_sources(soc.c)
+
+zephyr_include_directories(.)
 
 set(SOC_LINKER_SCRIPT ${ZEPHYR_BASE}/include/zephyr/arch/arm/cortex_m/scripts/linker.ld CACHE INTERNAL "")

soc/arm/mps2/Kconfig

@@ -1,29 +1,21 @@
 # Copyright (c) 2017-2019 Linaro Limited
 # SPDX-License-Identifier: Apache-2.0
 
+config SOC_SERIES_MPS2
+	select ARM
+	select GPIO_MMIO32 if GPIO
+
 config SOC_MPS2_AN521
-	bool
 	select CPU_CORTEX_M33
 	select CPU_HAS_ARM_MPU
 
-choice
-	prompt "ARM MPS2 SoCs"
-	depends on SOC_SERIES_MPS2
-
 config SOC_MPS2_AN385
-	bool "ARM Cortex-M3 SMM on V2M-MPS2 (Application Note AN385)"
 	select CPU_CORTEX_M3
 	select CPU_HAS_ARM_MPU
 
 config SOC_MPS2_AN521_CPU0
-	bool "ARM Cortex-M33 SMM-SSE-200 on V2M-MPS2+ (AN521) CPU0"
-	select SOC_MPS2_AN521
 	select CPU_HAS_ARM_SAU
 
 config SOC_MPS2_AN521_CPU1
-	bool "ARM Cortex-M33 SMM-SSE-200 on V2M-MPS2+ (AN521) CPU1"
-	select SOC_MPS2_AN521
 	select CPU_HAS_FPU
 	select ARMV8_M_DSP
-
-endchoice

soc/arm/mps2/Kconfig.defconfig

@@ -3,12 +3,9 @@
 
 if SOC_SERIES_MPS2
 
-config SOC_SERIES
-	default "mps2"
-
 config SYS_CLOCK_HW_CYCLES_PER_SEC
 	default 25000000
 
-source "soc/soc_legacy/arm/arm/mps2/Kconfig.defconfig.mps2*"
+rsource "Kconfig.defconfig.*"
 
 endif # SOC_SERIES_MPS2

soc/arm/mps2/Kconfig.defconfig.an385

@@ -3,9 +3,6 @@
 
 if SOC_MPS2_AN385
 
-config SOC
-	default "mps2_an385"
-
 config NUM_IRQS
 	default 32
 

soc/arm/mps2/Kconfig.defconfig.an521

@@ -3,9 +3,6 @@
 
 if SOC_MPS2_AN521
 
-config SOC
-	default "mps2_an521"
-
 config NUM_IRQS
 	default 96
 

soc/arm/mps2/Kconfig.soc

@@ -0,0 +1,37 @@
+# Copyright (c) 2017-2019 Linaro Limited
+# SPDX-License-Identifier: Apache-2.0
+
+config SOC_SERIES_MPS2
+	bool
+	select SOC_FAMILY_ARM
+	help
+	  Enable support for ARM MPS2 MCU Series
+
+config SOC_MPS2_AN385
+	bool
+	select SOC_SERIES_MPS2
+	help
+	  ARM Cortex-M3 SMM on V2M-MPS2 (Application Note AN385)
+
+config SOC_MPS2_AN521
+	bool
+	select SOC_SERIES_MPS2
+
+config SOC_MPS2_AN521_CPU0
+	bool
+	select SOC_MPS2_AN521
+	help
+	  ARM Cortex-M33 SMM-SSE-200 on V2M-MPS2+ (AN521) CPU0
+
+config SOC_MPS2_AN521_CPU1
+	bool
+	select SOC_MPS2_AN521
+	help
+	  ARM Cortex-M33 SMM-SSE-200 on V2M-MPS2+ (AN521) CPU1
+
+config SOC_SERIES
+	default "mps2" if SOC_SERIES_MPS2
+
+config SOC
+	default "an385" if SOC_MPS2_AN385
+	default "an521" if SOC_MPS2_AN521

soc/arm/soc.yml

@@ -1,6 +1,13 @@
 family:
 - name: arm
   series:
+  - name: mps2
+    socs:
+    - name: an385
+    - name: an521
+      cpuclusters:
+      - name: cpu0
+      - name: cpu1
   - name: mps3
     socs:
     - name: an547

soc/soc_legacy/arm/arm/mps2/Kconfig.series

@@ -1,10 +0,0 @@
-# Copyright (c) 2017 Linaro Limited
-# SPDX-License-Identifier: Apache-2.0
-
-config SOC_SERIES_MPS2
-	bool "Arm MPS2 MCU Series"
-	select ARM
-	select SOC_FAMILY_ARM
-	select GPIO_MMIO32 if GPIO
-	help
-	  Enable support for ARM MPS2 MCU Series