boards: Update documentation links

Updates documentation links for shortened paths

Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>

boards/96boards/aerocore2/doc/index.rst

@@ -80,7 +80,7 @@ features:
 More details about the board can be found at `96Boards website`_.
 
 The default configuration can be found in
-:zephyr_file:`boards/96boards/96b_aerocore2/96b_aerocore2_defconfig`
+:zephyr_file:`boards/96boards/aerocore2/96b_aerocore2_defconfig`
 
 Connections and IOs
 ===================

boards/96boards/argonkey/doc/index.rst

@@ -78,7 +78,7 @@ More information about the board can be found at the
 `ARGONKEY website`_.
 
 The default board configuration can be found in
-:zephyr_file:`boards/96boards/96b_argonkey/96b_argonkey_defconfig`
+:zephyr_file:`boards/96boards/argonkey/96b_argonkey_defconfig`
 
 Connections and IOs
 ===================

boards/96boards/avenger96/doc/index.rst

@@ -164,7 +164,7 @@ features:
 +-----------+------------+-------------------------------------+
 
 The default configuration can be found in
-:zephyr_file:`boards/96boards/96b_avenger96/96b_avenger96_defconfig`
+:zephyr_file:`boards/96boards/avenger96/96b_avenger96_defconfig`
 
 
 Connections and IOs

boards/96boards/carbon/doc/nrf51822.rst

@@ -50,7 +50,7 @@ Supported Features
 +-----------+------------+-------------------------------------+
 
 The default configuration can be found in
-:zephyr_file:`boards/96boards/96b_carbon/96b_carbon_nrf51822_defconfig`
+:zephyr_file:`boards/96boards/carbon/96b_carbon_nrf51822_defconfig`
 
 Connections and IOs
 ===================

boards/96boards/carbon/doc/stm32f401xe.rst

@@ -101,7 +101,7 @@ hardware features:
 More details about the board can be found at `96Boards website`_.
 
 The default configuration can be found in
-:zephyr_file:`boards/96boards/96b_carbon/96b_carbon_stm32f401xe_defconfig`
+:zephyr_file:`boards/96boards/carbon/96b_carbon_stm32f401xe_defconfig`
 
 Connections and IOs
 ===================

boards/96boards/neonkey/doc/index.rst

@@ -75,7 +75,7 @@ features:
 More details about the board can be found at `96Boards website`_.
 
 The default board configuration can be found in
-:zephyr_file:`boards/96boards/96b_neonkey/96b_neonkey_defconfig`
+:zephyr_file:`boards/96boards/neonkey/96b_neonkey_defconfig`
 
 Connections and IOs
 ===================

boards/96boards/nitrogen/doc/index.rst

@@ -76,7 +76,7 @@ See `Nordic Semiconductor Infocenter`_ for a complete list of nRF52-based
 board hardware features.
 
 The default configuration can be found in
-:zephyr_file:`boards/96boards/96b_nitrogen/96b_nitrogen_defconfig`
+:zephyr_file:`boards/96boards/nitrogen/96b_nitrogen_defconfig`
 
 Pin Mapping
 ===========

boards/96boards/stm32_sensor_mez/doc/index.rst

@@ -74,7 +74,7 @@ hardware features:
 +-----------+------------+-------------------------------------+
 
 The default board configuration can be found in
-:zephyr_file:`boards/96boards/96b_stm32_sensor_mez/96b_stm32_sensor_mez_defconfig`
+:zephyr_file:`boards/96boards/stm32_sensor_mez/96b_stm32_sensor_mez_defconfig`
 
 Connections and IOs
 ===================

boards/96boards/wistrio/doc/96b_wistrio.rst

@@ -71,7 +71,7 @@ features:
 +-----------+------------+-------------------------------------+
 
 The default board configuration can be found in
-:zephyr_file:`boards/96boards/96b_wistrio/96b_wistrio_defconfig`
+:zephyr_file:`boards/96boards/wistrio/96b_wistrio_defconfig`
 
 Connections and IOs
 ===================

boards/adafruit/feather_m0_basic_proto/doc/index.rst

@@ -58,7 +58,7 @@ following hardware features:
 Other hardware features are not currently supported by Zephyr.
 
 The default configuration can be found in the Kconfig file
-:zephyr_file:`boards/adafruit/adafruit_feather_m0_basic_proto/adafruit_feather_m0_basic_proto_defconfig`.
+:zephyr_file:`boards/adafruit/feather_m0_basic_proto/adafruit_feather_m0_basic_proto_defconfig`.
 
 Connections and IOs
 ===================

boards/adafruit/feather_m0_lora/doc/index.rst

@@ -61,7 +61,7 @@ following hardware features:
 Other hardware features are not currently supported by Zephyr.
 
 The default configuration can be found in the Kconfig file
-:zephyr_file:`boards/adafruit/adafruit_feather_m0_lora/adafruit_feather_m0_lora_defconfig`.
+:zephyr_file:`boards/adafruit/feather_m0_lora/adafruit_feather_m0_lora_defconfig`.
 
 Connections and IOs
 ===================

boards/adafruit/grand_central_m4_express/doc/index.rst

@@ -61,7 +61,7 @@ hardware features:
 Other hardware features are not currently supported by Zephyr.
 
 The default configuration can be found in the Kconfig file
-:zephyr_file:`boards/adafruit/adafruit_grand_central_m4_express/adafruit_grand_central_m4_express_defconfig`.
+:zephyr_file:`boards/adafruit/grand_central_m4_express/adafruit_grand_central_m4_express_defconfig`.
 
 Connections and IOs
 ===================

boards/adafruit/itsybitsy/doc/index.rst

@@ -127,7 +127,7 @@ with the :zephyr:code-sample:`led-apa102` sample application.
 
 You can build and flash the examples to make sure Zephyr is running correctly on
 your board. The button and LED definitions can be found in
-:zephyr_file:`boards/adafruit/adafruit_itsybitsy/adafruit_itsybitsy_nrf52840.dts`.
+:zephyr_file:`boards/adafruit/itsybitsy/adafruit_itsybitsy_nrf52840.dts`.
 
 Programming and Debugging
 *************************

boards/adafruit/itsybitsy_m4_express/doc/index.rst

@@ -63,7 +63,7 @@ hardware features:
 Other hardware features are not currently supported by Zephyr.
 
 The default configuration can be found in the Kconfig file
-:zephyr_file:`boards/adafruit/adafruit_itsybitsy_m4_express/adafruit_itsybitsy_m4_express_defconfig`.
+:zephyr_file:`boards/adafruit/itsybitsy_m4_express/adafruit_itsybitsy_m4_express_defconfig`.
 
 Zephyr can use the default Cortex-M SYSTICK timer or the SAM0 specific RTC.
 To use the RTC, set :code:`CONFIG_CORTEX_M_SYSTICK=n` and set

boards/adafruit/trinket_m0/doc/index.rst

@@ -56,7 +56,7 @@ features:
 Other hardware features are not currently supported by Zephyr.
 
 The default configuration can be found in the Kconfig file
-:zephyr_file:`boards/adafruit/adafruit_trinket_m0/adafruit_trinket_m0_defconfig`.
+:zephyr_file:`boards/adafruit/trinket_m0/adafruit_trinket_m0_defconfig`.
 
 Connections and IOs
 ===================

boards/adi/eval_adin1110ebz/doc/index.rst

@@ -82,7 +82,7 @@ following hardware features:
 
 The default configuration can be found in the defconfig file:
 
-	:zephyr_file:`boards/adi/adi_eval_adin1110ebz/adi_eval_adin1110ebz_defconfig`
+	:zephyr_file:`boards/adi/eval_adin1110ebz/adi_eval_adin1110ebz_defconfig`
 
 
 Connections and IOs

boards/adi/eval_adin2111ebz/doc/index.rst

@@ -86,7 +86,7 @@ following hardware features:
 
 The default configuration can be found in the defconfig file:
 
-	:zephyr_file:`boards/adi/adi_eval_adin2111ebz/adi_eval_adin2111ebz_defconfig`
+	:zephyr_file:`boards/adi/eval_adin2111ebz/adi_eval_adin2111ebz_defconfig`
 
 
 Connections and IOs

boards/adi/sdp_k1/doc/index.rst

@@ -90,7 +90,7 @@ The Zephyr stm32f469i_disco board configuration supports the following hardware
 Other hardware features are not yet supported on Zephyr porting.
 
 The default configuration can be found in
-:zephyr_file:`boards/adi/adi_sdp_k1/adi_sdp_k1_defconfig`
+:zephyr_file:`boards/adi/sdp_k1/adi_sdp_k1_defconfig`
 
 Pin Mapping
 ===========

boards/arduino/due/doc/index.rst

@@ -56,7 +56,7 @@ See `Arduino Due website`_ and `Atmel SAM3X8E Datasheet`_ for a complete
 list of Arduino Due board hardware features.
 
 The default configuration can be found in the Kconfig
-:zephyr_file:`boards/arduino/arduino_due/arduino_due_defconfig`.
+:zephyr_file:`boards/arduino/due/arduino_due_defconfig`.
 
 .. note::
    For I2C, pull-up resistors are required for using SCL1 and SDA1 (near IO13).

boards/arduino/mkrzero/doc/index.rst

@@ -66,7 +66,7 @@ features:
 Other hardware features are not currently supported by Zephyr.
 
 The default configuration can be found in the Kconfig
-:zephyr_file:`boards/arduino/arduino_mkrzero/arduino_mkrzero_defconfig`.
+:zephyr_file:`boards/arduino/mkrzero/arduino_mkrzero_defconfig`.
 
 Connections and IOs
 ===================

boards/arduino/nano_33_iot/doc/index.rst

@@ -64,7 +64,7 @@ features:
 Other hardware features are not currently supported by Zephyr.
 
 The default configuration can be found in the Kconfig
-:zephyr_file:`boards/arduino/arduino_nano_33_iot/arduino_nano_33_iot_defconfig`.
+:zephyr_file:`boards/arduino/nano_33_iot/arduino_nano_33_iot_defconfig`.
 
 Connections and IOs
 ===================

boards/arduino/opta/doc/index.rst

@@ -63,7 +63,7 @@ The current Zephyr arduino_opta_m4 board configuration supports the following ha
 Other hardware features are not yet supported on Zephyr porting.
 
 The default configuration per core can be found in the defconfig file:
-:zephyr_file:`boards/arduino/arduino_opta/arduino_opta_stm32h747xx_m4_defconfig`
+:zephyr_file:`boards/arduino/opta/arduino_opta_stm32h747xx_m4_defconfig`
 
 Pin Mapping
 ===========

boards/arduino/zero/doc/index.rst

@@ -58,7 +58,7 @@ features:
 Other hardware features are not currently supported by Zephyr.
 
 The default configuration can be found in the Kconfig
-:zephyr_file:`boards/arduino/arduino_zero/arduino_zero_defconfig`.
+:zephyr_file:`boards/arduino/zero/arduino_zero_defconfig`.
 
 Connections and IOs
 ===================

boards/circuit_dojo/feather/doc/index.rst

@@ -147,7 +147,7 @@ the board are working properly with Zephyr:
 
 You can build and flash the examples to make sure Zephyr is running correctly on
 your board. The button and LED definitions can be found in
-:zephyr_file:`boards/circuit_dojo/circuitdojo_feather/circuitdojo_feather_nrf9160_common.dtsi`.
+:zephyr_file:`boards/circuit_dojo/feather/circuitdojo_feather_nrf9160_common.dtsi`.
 
 References
 **********

boards/dragino/lsn50/doc/index.rst

@@ -101,7 +101,7 @@ The Zephyr Dragino LSN50 board configuration supports the following hardware fea
 Other hardware features are not yet supported on this Zephyr port.
 
 The default configuration can be found in the defconfig file:
-:zephyr_file:`boards/dragino/dragino_lsn50/dragino_lsn50_defconfig`
+:zephyr_file:`boards/dragino/lsn50/dragino_lsn50_defconfig`
 
 
 Connections and IOs

boards/dragino/nbsn95/doc/index.rst

@@ -100,7 +100,7 @@ The Zephyr Dragino NBSN95 board configuration supports the following hardware fe
 Other hardware features are not yet supported on this Zephyr port.
 
 The default configuration can be found in the defconfig file:
-:zephyr_file:`boards/dragino/dragino_nbsn95/dragino_nbsn95_defconfig`
+:zephyr_file:`boards/dragino/nbsn95/dragino_nbsn95_defconfig`
 
 
 Connections and IOs

boards/ebyte/e73_tbb/doc/index.rst

@@ -211,7 +211,7 @@ the board are working properly with Zephyr:
 
 You can build and flash the examples to make sure Zephyr is running correctly on
 your board. The button and LED definitions can be found in
-:zephyr_file:`boards/ebyte/ebyte_e73_tbb/ebyte_e73_tbb_nrf52832.dts`.
+:zephyr_file:`boards/ebyte/e73_tbb/ebyte_e73_tbb_nrf52832.dts`.
 
 References
 **********

boards/google/kukui/doc/index.rst

@@ -48,7 +48,7 @@ The following features are supported:
 Other features (such as I2C) are not available in Zephyr.
 
 The default configuration can be found in
-:zephyr_file:`boards/google/google_kukui/google_kukui_defconfig`
+:zephyr_file:`boards/google/kukui/google_kukui_defconfig`
 
 Connections and IOs
 ===================

boards/google/twinkie_v2/doc/index.rst

@@ -32,7 +32,7 @@ The following features are supported:
 +-----------+------------+-------------------------------------+
 
 The default configuration can be found in the defconfig file:
-:zephyr_file:`boards/google/google_twinkie_v2/google_twinkie_v2_defconfig`
+:zephyr_file:`boards/google/twinkie_v2/google_twinkie_v2_defconfig`
 
 Pin Mapping
 ===========

boards/holyiot/yj16019/doc/index.rst

@@ -136,7 +136,7 @@ the board are working properly with Zephyr:
 
 You can build and flash the examples to make sure Zephyr is running
 correctly on your board. The button and LED definitions can be found
-in :zephyr_file:`boards/holyiot/holyiot_yj16019/holyiot_yj16019.dts`.
+in :zephyr_file:`boards/holyiot/yj16019/holyiot_yj16019.dts`.
 
 References
 **********

boards/intel/adsp/doc/intel_adsp_generic.rst

@@ -139,7 +139,7 @@ undocumented rimage precedence rules it's best to use only one way at a time.
 
 - For board-specific needs you can define WEST_SIGN_OPTS in
   ``boards/my/board/board.cmake``, see example in
-  ``soc/intel/intel_adsp/common/CMakeLists.txt``
+  ``soc/intel/adsp/common/CMakeLists.txt``
 
 Starting with Zephyr 3.6.0, ``west flash`` does not invoke ``west sign``
 anymore and you cannot pass rimage parameters to ``west flash`` anymore. To

boards/intel/socfpga/agilex_socdk/doc/index.rst

@@ -41,7 +41,7 @@ hardware features:
 Other hardware features have not been enabled yet for this board.
 
 The default configuration can be found in
-:zephyr_file:`boards/intel/intel_socfpga/agilex_socdk/intel_socfpga_agilex_socdk_defconfig`
+:zephyr_file:`boards/intel/socfpga/agilex_socdk/intel_socfpga_agilex_socdk_defconfig`
 
 Programming and Debugging
 *************************

boards/intel/socfpga_std/cyclonev_socdk/doc/index.rst

@@ -169,7 +169,7 @@ application.
 ``Important!!!`` : Before flashing the board a ``preloader`` is required,
 you can download `cv_soc_devkit_ghrd.tar.gz <https://releases.rocketboards.org/release/2018.05/gsrd/hw/cv_soc_devkit_ghrd.tar.gz>`_,
 extract the file and copy ``cv_soc_devkit_ghrd/software/preloader/uboot-socfpga/spl/u-boot-spl``
-to :zephyr_file:`boards/intel/intel_socfpga_std/cyclonev_socdk/support/`
+to :zephyr_file:`boards/intel/socfpga_std/cyclonev_socdk/support/`
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
@@ -184,7 +184,7 @@ using the customized OpenOCD runner script :zephyr_file:`scripts/west_commands/r
 After it completes the kernel will immediately boot using the GSRD preloader.
 Notice that there a lot of helper files to ``flash`` the application with
 OpenOCD and GDB Debbuger (Zephyr SDK must be installed in your machine).
-This files should be located in :zephyr_file:`boards/intel/intel_socfpga_std/cyclonev_socdk/support/` including:
+This files should be located in :zephyr_file:`boards/intel/socfpga_std/cyclonev_socdk/support/` including:
 
 * blaster_6810.hex : USB-BlasterII firmware
 * tmp_preloader_dl_cmd.txt : GDB helper file to load the preloader
@@ -294,7 +294,7 @@ You will see output similar to the following:
    warning: No executable has been specified and target does not support
    determining executable automatically.  Try using the "file" command.
    0xffff147c in ?? ()
-   warning: /home/demo/zephyrproject/zephyr/boards/intel/intel_socfpga_std/cyclonev_socdk/support/tmp_appli_debug_cmd.gdb: No such file or directory
+   warning: /home/demo/zephyrproject/zephyr/boards/intel/socfpga_std/cyclonev_socdk/support/tmp_appli_debug_cmd.gdb: No such file or directory
    [Inferior 1 (Remote target) detached]
    Info : dropped 'gdb' connection
    shutdown command invoked

boards/khadas/edgev/doc/index.rst

@@ -32,7 +32,7 @@ hardware features:
 Other hardware features have not been enabled yet for this board.
 
 The default configuration can be found in (NON-SMP)
-:zephyr_file:`boards/khadas/khadas_edgev/khadas_edgev_defconfig`
+:zephyr_file:`boards/khadas/edgev/khadas_edgev_defconfig`
 
 There are multiple serial ports on the board: Zephyr is using
 uart2 as serial console.

boards/mikroe/clicker_2/doc/mikroe_clicker_2.rst

@@ -55,7 +55,7 @@ The Zephyr MikroE Clicker 2 configuration supports the following hardware featur
 Other hardware features have not been enabled yet for this board.
 
 The default configuration can be found in
-:zephyr_file:`boards/mikroe/mikroe_clicker_2/mikroe_clicker_2_defconfig`
+:zephyr_file:`boards/mikroe/clicker_2/mikroe_clicker_2_defconfig`
 
 Connections and IOs
 ===================

boards/mikroe/mini_m4_for_stm32/doc/mikroe_mini_m4_for_stm32.rst

@@ -86,7 +86,7 @@ features:
 Other hardware features have not been enabled yet for this board.
 
 The default configuration can be found in
-:zephyr_file:`boards/mikroe/mikroe_mini_m4_for_stm32/mikroe_mini_m4_for_stm32_defconfig`
+:zephyr_file:`boards/mikroe/mini_m4_for_stm32/mikroe_mini_m4_for_stm32_defconfig`
 
 Serial Port
 ===========

boards/olimex/lora_stm32wl_devkit/doc/olimex_lora_stm32wl_devkit.rst

@@ -83,8 +83,8 @@ Other hardware features are not yet supported on this Zephyr port.
 
 The default configuration can be found in:
 
-- :zephyr_file:`boards/olimex/olimex_lora_stm32wl_devkit/olimex_lora_stm32wl_devkit_defconfig`
-- :zephyr_file:`boards/olimex/olimex_lora_stm32wl_devkit/olimex_lora_stm32wl_devkit.dts`
+- :zephyr_file:`boards/olimex/lora_stm32wl_devkit/olimex_lora_stm32wl_devkit_defconfig`
+- :zephyr_file:`boards/olimex/lora_stm32wl_devkit/olimex_lora_stm32wl_devkit.dts`
 
 Programming and Debugging
 *************************

boards/raytac/mdbt50q_db_33/doc/index.rst

@@ -187,7 +187,7 @@ the board are working properly with Zephyr:
 
 You can build and flash the examples to make sure Zephyr is running correctly on
 your board. The button and LED definitions can be found in
-:zephyr_file:`boards/raytac/raytac_mdbt50q_db_33/raytac_mdbt50q_db_33_nrf52833.dts`.
+:zephyr_file:`boards/raytac/mdbt50q_db_33/raytac_mdbt50q_db_33_nrf52833.dts`.
 
 Selecting the pins
 ==================

boards/raytac/mdbt50q_db_40/doc/index.rst

@@ -189,7 +189,7 @@ the board are working properly with Zephyr:
 
 You can build and flash the examples to make sure Zephyr is running correctly on
 your board. The button and LED definitions can be found in
-:zephyr_file:`boards/raytac/raytac_mdbt50q_db_40/raytac_mdbt50q_db_40_nrf52840.dts`.
+:zephyr_file:`boards/raytac/mdbt50q_db_40/raytac_mdbt50q_db_40_nrf52840.dts`.
 
 Selecting the pins
 ==================

boards/sparkfun/thing_plus/doc/index.rst

@@ -139,7 +139,7 @@ the board are working properly with Zephyr:
 
 You can build and flash the examples to make sure Zephyr is running correctly on
 your board. The button and LED definitions can be found in
-:zephyr_file:`boards/sparkfun/sparkfun_thing_plus/sparkfun_thing_plus_nrf9160_common.dtsi`.
+:zephyr_file:`boards/sparkfun/thing_plus/sparkfun_thing_plus_nrf9160_common.dtsi`.
 
 References
 **********

boards/weact/stm32g431_core/doc/index.rst

@@ -52,7 +52,7 @@ features:
 
 The default configuration can be found in the defconfig file:
 
-:zephyr_file:`boards/weact/weact_stm32g431_core/weact_stm32g431_core_defconfig`
+:zephyr_file:`boards/weact/stm32g431_core/weact_stm32g431_core_defconfig`
 
 Pin Mapping
 ===========

boards/wurth_elektronik/proteus2ev/doc/index.rst

@@ -150,7 +150,7 @@ the board are working properly with Zephyr:
 
 You can build and flash the examples to make sure Zephyr is running correctly on
 your board. The button and LED definitions can be found in
-:zephyr_file:`boards/wurth_elektronik/we_proteus2ev/we_proteus2ev_nrf52832.dts`.
+:zephyr_file:`boards/wurth_elektronik/proteus2ev/we_proteus2ev_nrf52832.dts`.
 
 References
 **********

boards/wurth_elektronik/proteus3ev/doc/index.rst

@@ -151,7 +151,7 @@ LEDs on the board are working properly with Zephyr:
 
 You can build and flash the examples to make sure Zephyr is running correctly
 on your board. The button and LED definitions can be found in
-:zephyr_file:`boards/wurth_elektronik/we_proteus3ev/we_proteus3ev_nrf52840.dts`.
+:zephyr_file:`boards/wurth_elektronik/proteus3ev/we_proteus3ev_nrf52840.dts`.
 
 References
 **********