zephyr

Commit Graph

Author	SHA1	Message	Date
Gerard Marull-Paretas	acc8cb4bc8	include: add missing irq.h include Some modules use the IRQ API without including the necessary headers. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>	3 years ago
Gerard Marull-Paretas	34a6848887	include: add missing arch/cpu.h include The sys* ops like sys_clear_bit are indirectly included via arch CPU header. Other stuff like find_msb_set end up included via this header as well. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>	3 years ago
Anas Nashif	43371d0414	intel_adsp: move cavs to be a series Intel ADSP CAVS is now a proper series with all CAVS SoCs running under it. This will give us to Intel ADSP series: - CAVS - ACE v1.x Signed-off-by: Anas Nashif <anas.nashif@intel.com>	3 years ago
Anas Nashif	2d87948818	drivers: ipm/spi/intc: remove Intel S1000 support Remove intel_s1000_crb support. The board is no longer available or supported in the zephyr tree. Signed-off-by: Anas Nashif <anas.nashif@intel.com>	3 years ago
Gerard Marull-Paretas	fb60aab245	drivers: migrate includes to <zephyr/...> In order to bring consistency in-tree, migrate all drivers to the new prefix <zephyr/...>. Note that the conversion has been scripted, refer to #45388 for more details. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>	3 years ago
Kai Vehmanen	91516a2be3	drivers: intc: intc_cavs: use correct per-core register set for all ops Current code uses per-core register to check interrupt status and dispatch handlers. However to disable/enable the interrupt, core zero register is always used. While the handlers in _sw_isr_table are common for all cores, the status bits should still be handled separate for each core. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>	3 years ago
Gerard Marull-Paretas	e6170a4dbc	drivers: interrupt_controller: remove usage of device_pm_control_nop device_pm_control_nop is now deprecated in favour of NULL. Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>	4 years ago
Guennadi Liakhovetski	bfe9008262	cavs: (cosmetic) clean up and simplification of intc_cavs.c 1. don't use "inline" in .c, let the compiler decide 2. remove superfluous parentheses 3. simplify a function by directly returning the result of a boolean operation Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>	5 years ago
Guennadi Liakhovetski	80f9daab9f	cavs: disable all interrupts when configuring interrupt controllers Some interrupts can be enabled by the ROM, e.g. the timer interrupt. When then in Zephyr the interrupt controller is enabled, before individual interrupts are configured, interrupts can arrive and lead to the spurious interrupt handler being invoked. Fix thid by disabling all child interrupts when configuring cAVS interrupt controllers. Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>	5 years ago
Kumar Gala	2d754333ad	drivers: interrupt_controller: Convert drivers to new DT device macros Convert interrupt_controller drivers from: DEVICE_AND_API_INIT -> DEVICE_DT_INST_DEFINE DEVICE_GET -> DEVICE_DT_INST_GET DEVICE_DECLARE -> DEVICE_DT_INST_DECLARE etc... Signed-off-by: Kumar Gala <kumar.gala@linaro.org>	5 years ago
Anas Nashif	f92d0a4eee	interrupt controller: set PER_CPU_OFFSET for new SoCs Add missing SoCs and set PER_CPU_OFFSET Signed-off-by: Anas Nashif <anas.nashif@intel.com>	5 years ago
Andy Ross	544a38ee62	soc/xtensa/intel_adsp: Upstream updates Significant rework of the Intel Audio DSP SoC/board layers. Includes code from the following upstream commits: Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Thu Jun 25 16:34:36 2020 +0100 xtesna: adsp: use 50k ticks per sec for audio Audio needs high resolution scheduling so schedule to nearest 20uS. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Andy Ross <andrew.j.ross@intel.com> Date: Wed Jun 24 13:59:01 2020 -0700 soc/xtensa/intel_adsp: Remove sof-config.h includes This header isn't used any more, and in any case shouldn't be included by SoC-layer Zephyr headers that need to be able to build without SOF. Signed-off-by: Andy Ross <andrew.j.ross@intel.com> Author: Andy Ross <andrew.j.ross@intel.com> Date: Sat Jun 20 15:42:58 2020 -0700 soc/intel_adsp: Leave interrupts disabled at MP startup This had some code that was pasted in from esp32 that was inexplicably enabling interrupts when starting an auxiliary CPU. The original intent was that the resulting key would be passed down to the OS, but that's a legacy SMP mechanism and unused. What it actually did was SET the resulting value in PS.INTLEVEL, enabling interrupts globally before the CPU is ready to handle them. Just remove. The system doesn't need to enable interrupts until the entrance to the first user thread on this CPU, which will do it automatically as part of the context switch. Signed-off-by: Andy Ross <andrew.j.ross@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Jun 23 13:57:54 2020 +0300 dts: intel_cavs: Add required label Add required label fixing build for CAVS15, 20, 25. Fixes following errors: ... devicetree error: 'label' is marked as required in 'properties:' in bindings/interrupt-controller/intel,cavs-intc.yaml, but does not appear in ... Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Jun 23 15:19:56 2020 +0300 soc: cavs_v18: Remove dts_fixup and fix build Remove unused now dts_fixup.h and fix build with the recent code base. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Jun 23 15:12:25 2020 +0300 soc: cavs_v20: Remove dts_fixup and fix build Remove unused now dts_fixup.h and fix build with the recent code base. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Jun 23 14:59:23 2020 +0300 soc: cavs_v25: Remove dts_fixup fix build Remove unused now dts_fixup and fix build with the latest code base. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Fri Jun 12 12:29:06 2020 +0300 soc: intel_adsp: Remove unused functions Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Wed Jun 10 17:53:58 2020 +0300 soc: intel_adsp: Clean up soc.h Remove unused or duplicated definitions. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Wed Jun 10 17:02:23 2020 +0300 soc: intel_adsp: De-duplicate soc.h Move soc.h to common SOC area. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Wed Jun 10 15:54:19 2020 +0300 soc: intel_adsp: Remove duplicated io.h Move duplicated io.h to common SOC area. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Fri Jun 12 12:39:46 2020 +0300 cmake: Correct SOC_SERIES name for byt and bdw Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Fri Jun 12 12:39:02 2020 +0300 soc: intel_adsp: Build bootloader only for specific SOCs Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Thu Jun 11 13:46:25 2020 +0100 boards: xtensa: adsp: add byt and bdw boards WIP Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Andy Ross <andrew.j.ross@intel.com> Date: Wed Jun 10 10:01:29 2020 -0700 soc/intel_adsp: Make the HDA timer the default always The CAVS_TIMER was originally written because the CCOUNT values are skewed between SMP CPUs, so it's the default when SMP=y. But really it should be the default always, the 19.2 MHz timer is plenty fast enough to be the Zephyr cycle timer, and it's rate is synchronized across the whole system (including the host CPU), making it a better choice for timing-sensitive applications. Signed-off-by: Andy Ross <andrew.j.ross@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Wed Jun 10 15:21:43 2020 +0300 soc: cavs_v25: Enable general samples build Enables general samples build for SOC cavs_v25. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Wed Jun 10 15:13:53 2020 +0300 soc: cavs_v20: Enable general samples build Enable general sample build. Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Wed Jun 10 14:35:13 2020 +0300 soc: cavs_v18: Fix build general samples Fix building general samples for CAVS18. Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Wed Jun 10 14:22:40 2020 +0300 soc: intel_adsp: Add support for other SOCs Support other SOCs in the "ready" message to the Host. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Wed Jun 10 13:25:39 2020 +0300 soc: intel_adsp: Move adsp.c to common SOC area Move adsp.c to common and clean makefiles. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Jun 9 17:18:18 2020 +0300 boards: intel_adsp: Remove dependency on SOF Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Tue Jun 9 14:29:44 2020 +0100 soc: xtensa: cavs: build now good for cavs20 + 25 Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Jun 9 15:57:01 2020 +0300 soc: cavs_v15: Fix build for hello_world Fix build for other then audio/sof targets. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Jun 9 14:50:12 2020 +0300 sample: audio/sof: Remove old overlays Removing old overlays used to switch logging backend. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Mon Jun 8 15:02:01 2020 +0300 soc: intel_adsp: Correct TEXT area Correct HEADER_SPACE and put TEXT to: (HP_SRAM_WIN0_BASE + HP_SRAM_WIN0_SIZE + VECTOR_TBL_SIZE) Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Jun 9 14:44:47 2020 +0300 soc: intel_adsp: Trivial syntax cleanup Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Jun 9 14:41:07 2020 +0300 soc: intel_adsp: Fix bootloader script path Make it possible to find linker script if build is done not inside ZEPHYR_BASE. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Tue Jun 9 12:10:17 2020 +0100 soc: xtensa: cavs20/25: fix build with new headers - WIP Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Jun 9 13:35:38 2020 +0300 soc: intel_adsp: Fix include headers Fixes include headers Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Tue Jun 9 10:38:50 2020 +0100 soc: xtensa: cav18: updated headers- WIP Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Andy Ross <andrew.j.ross@intel.com> Date: Fri May 1 15:29:26 2020 -0700 soc/xtensa/intel_adsp: Clean up MP config logic CONFIG_MP_NUM_CPUS is a platform value, indicating the number of CPUs for which the Zephyr image is built. This is the value kernel and device code should use to predicate questions like "is there more than one CPU?" CONFIG_SMP is an application tunable, controlling whether or not the kernel schedules threads on CPUs other than the first one. This is orthogonal to MP_NUM_CPUS: it's possible to build a "SMP" kernel on a uniprocessor system or have a UP kernel on a MP system if the other cores are used for non-thread application code. CONFIG_SCHED_IPI_SUPPORTED is a platform flag telling an SMP kernel whether or not it can synchronously signal other CPUs of scheduler state changes. It should be inspected only inside the scheduler (or other code that uses the API). This should be selected in kconfig by soc layer code, or by a driver that implements the feature. CONFIG_IPM_CAVS_IDC is a driver required to implement IPI on this platform. This is what we should use as a predicate if we have dependence on the IPM driver for a platform feature. These were all being sort of borged together in code. Split them up correctly, allowing the platform MP layer to be unit tested in the absence of SMP (c.f. tests/kernel/mp), and SMP kernels with only one CPU (which is pathlogical in practice, but also a very good unit test) to be built. Also removes some dead linker code for SMP-related sections that don't exist in Zephyr. Signed-off-by: Andy Ross <andrew.j.ross@intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Jun 8 16:41:55 2020 +0100 soc: xtensa: bootloader - use linker script Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Jun 8 16:26:18 2020 +0100 soc: xtensa: further fix headers - WIP Simplify the directory structure, WIP for cavs20 and cavs25 Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Mon Jun 8 12:59:30 2020 +0300 soc: cavs_v15: Remove unneeded include Remove include fixing build. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Sun Jun 7 12:37:35 2020 +0100 soc:xtensa: adsp: remove sof specific code from soc headers TODO: v1.8+ Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Marc Herbert <marc.herbert@intel.com> Date: Thu Jun 4 23:19:37 2020 -0700 intel_adsp_/doc: fix duplicate .rst labels Quick fix purely to make the build green again. Signed-off-by: Marc Herbert <marc.herbert@intel.com> Author: Marc Herbert <marc.herbert@intel.com> Date: Thu Jun 4 22:34:40 2020 -0700 samples/audio/sof: use OVERLAY_CONFIG to import apollolake_defconfig This reverts commit 21f16b5b1d29fca83d1b62b1b75683b5a1bc2935 that copied it here instead. Signed-off-by: Marc Herbert <marc.herbert@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Fri Jun 5 12:34:48 2020 +0300 soc: intel_adsp: Move soc_mp to common Moving soc_mp to common SOC area, it still needs fixes for taking number of cores from Zephyr Kconfig, etc. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Thu Jun 4 16:05:06 2020 +0300 soc: intel_adsp: Move memory.h from lib/ For those files from SOF referencing platform/lib/memory.h we have include. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Thu Jun 4 15:20:09 2020 +0300 soc: intel_adsp: Rename platform.h to soc.h Rename to prevent including it from SOF. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Thu Jun 4 11:47:55 2020 +0300 soc: intel_adsp: Move headers Move headers to more convenient place Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Thu Jun 4 11:21:51 2020 +0300 soc: intel_adsp: More SOC cleaning Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Marc Herbert <marc.herbert@intel.com> Date: Mon Jun 1 15:31:34 2020 -0700 samples/audio/sof: import sof/src/arch/xtensa/ apollolake_defconfig Import modules/audio/sof/src/arch/xtensa/configs/apollolake_defconfig into prj.conf and new boards/up_squared_adsp.conf Signed-off-by: Marc Herbert <marc.herbert@intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Wed Jun 3 15:07:40 2020 +0100 soc:xtensa: adsp: let SOF configure the DSP for audio Let SOF do this for the moment. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Wed Jun 3 15:06:20 2020 +0100 soc: xtensa: cavs: remove headers similar to cavs15 Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Wed Jun 3 15:58:38 2020 +0300 soc: intel_adsp: Move ipc header to common Remove duplicated headers from CAVS to common SOC part Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Wed Jun 3 13:02:09 2020 +0300 soc: cavs_v15: Remove unneeded headers Remove also from CAVS15. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Jun 2 18:34:11 2020 +0300 Remove more headers Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Wed Jun 3 14:12:09 2020 +0100 soc: xtensa: remove cavs sod headers for drivers and trace. Duplicate cavs15 headers. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Wed Jun 3 14:05:12 2020 +0100 samples: move sof dai, dma and clk configs to SOF Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Jun 2 17:38:45 2020 +0300 soc: intel_adsp: Remove more duplicated headers Remove more headers Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Tue Jun 2 15:50:03 2020 +0100 samples: sof: remove pm realted files. Use the SOF versions. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Jun 2 16:55:40 2020 +0300 WIP: Strip lib from include path WIP, pushed for sync Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Jun 2 14:44:33 2020 +0300 soc: intel_adsp: Remove more headers Remove even more common headers Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Jun 2 14:00:47 2020 +0300 soc: intel_adsp: Remove SOF headers The headers would be used by audio/sof app directly from SOF module. Author: Andy Ross <andrew.j.ross@intel.com> Date: Sat May 30 11:01:26 2020 -0700 soc/intel_adsp: Alternative log reading script This script speaks the same protocol and works with the same firmware, but: Is a single file with no dependencies outside the python3 standard library and can be run out-of-tree (i.e. with setups where the firmware is not built on the device under test) * Operates in "tail" mode, where it will continue polling for more output, making it easier to watch a running process and acting more like a conventional console device. * Has no dependence on the diag_driver kernel module (it reads the DSP SRAM memory directly from the BAR mapping in the PCI device) * Is MUCH smaller than the existing tool. Signed-off-by: Andy Ross <andrew.j.ross@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Thu May 28 16:17:51 2020 +0300 Decrease HEP pool size to 192000 Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Fri May 29 10:27:00 2020 +0100 soc: xtensa: cavs25: complete support for cavs25 Builds, not tested on qmeu due to missing SOF ROM (TODO) Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Fri May 29 10:24:26 2020 +0100 soc: xtensa: cavs20: complete cavs20 support Now boots on qemu. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Fri May 29 10:22:13 2020 +0100 soc: xtensa: cavs18: complete boot support Now boots on qemu. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Fri May 29 10:19:23 2020 +0100 soc: xtensa: cavs15: use cavs15 instead of apl as linker soc name Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Fri May 29 10:16:06 2020 +0100 TODO: samples: sof: work around missing trace symbols. Disable local trace. Needs trace updates finished before this can be removed. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Wed May 27 15:57:19 2020 +0100 dts: xtensa: rename apl to cavs15 DTS This DTS is used by more than APL SOC. i.e. all CAVS15 SOCs Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Wed May 27 15:52:20 2020 +0100 west: commands: sign: Add signing support for other CAVS targets Sign for CAVS15, CAVS18, CAVS20 and CAVS25 SOCs Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Wed May 27 15:50:07 2020 +0100 boards: xtensa: cavs: used Zephyr mask macro Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Wed May 27 15:49:46 2020 +0100 soc: xtensa: move code to SOF Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Tue May 26 11:40:36 2020 +0100 soc: xtensa: use SOF versions of clk Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Mon May 25 18:38:45 2020 +0300 soc: intel_adsp: Send FW ready for non SOF configuration Configure windows and send FW ready when used without SOF, should be loaded with fw_loader script. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Mon May 25 18:02:22 2020 +0300 soc: intel_adsp: Use SOF version of the file Use exact copy from SOF module. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Mon May 25 17:47:27 2020 +0300 soc: intel_adsp: Clean up include headers Remove SOF mentions from the SOC headers. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Mon May 25 17:43:05 2020 +0300 soc: intel_adsp: Move SOF specific code to samples/audio/sof Move SOF specific code to the SOF sample. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Mon May 25 17:39:42 2020 +0300 soc: intel_adsp: Use SOF module's version of mem_window.c Use exact copy from SOF module. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Mon May 25 17:36:41 2020 +0300 soc: intel_adsp: Use exact copy from SOF module Use SOF module verion of the clk.c Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Mon May 25 14:03:35 2020 +0300 soc: xtensa: Add {SOC_FAMILY}/common/include path Add ${SOC_DIR}/${ARCH}/${SOC_FAMILY}/common/include path if exist. Fixes issues for xtensa SOCs. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon May 25 16:18:50 2020 +0100 soc: xtensa: cavs common: fix headers for build Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon May 25 16:10:57 2020 +0100 soc: xtensa: adsp: add so_inthandlers.h for Intel platforms Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon May 25 16:08:26 2020 +0100 cmake: xtensa: select correct compiler per CAVS target. TODO: what about XCC ? Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue May 19 14:59:26 2020 +0300 boards: up_squared_adsp: Move SOF configuration to samples Move SOF-specific configuration to samples/audio/sof prj. Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Fri May 15 15:29:50 2020 +0300 soc: intel_adsp: Move SOF code to modules/audio/sof Move SOF dependent code out of SOC area. Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Thu May 14 17:30:38 2020 +0300 Move task_main_start() to audio/sof sample Start task_main_start() from main of audio/sof sample. Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Wed May 13 15:37:20 2020 +0300 Rename up_xtreme_adsp to intel_adsp_cavs18 Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Mon Apr 27 14:12:59 2020 +0300 Add sample audio/sof for SOF initialization Add dedicated sample where we put SOF specific initialization. Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Mon May 11 18:49:36 2020 +0300 WIP: soc: cavs_v18: Cleanup Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Mon May 11 15:44:06 2020 +0300 soc: cavs_v15: Move soc init to common part Moving SOC init to the right place. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Mon May 11 15:02:28 2020 +0300 soc: intel_adsp: Move common part to special dir Moving common part to common/adsp.c Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Fri May 8 14:37:50 2020 +0300 boards: up_xtreme_adsp: Add initial up_xtreme_adsp board Add initial board copying existing up_squared_adsp board and using CAVS1.8 SOC family. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Thu May 7 15:30:51 2020 +0300 soc: intel_adsp: Generalize bootloader Move bootloader to soc/xtensa/intel_adsp making it available for other boards. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Tue May 5 21:31:00 2020 +0100 boards: xtensa: up_squared: Add support for all CAVS Add boot support for all CAVS versions. TODO: needs to be made common Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Tue May 5 21:25:34 2020 +0100 soc: xtensa: intel_adsp: Manage cache for DMA descriptors Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon May 4 21:10:50 2020 +0100 soc: xtensa: adsp: use 24M567 clock Use audio clock Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon May 4 10:04:01 2020 +0100 xtensa: soc: adsp: enable system agent Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Sun May 3 15:03:07 2020 +0100 soc: xtensa: intel_adsp: increase mem pool to 192k Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Sun May 3 15:02:31 2020 +0100 soc: xtensa: intel_adsp: re-enable DMA trace Buffer will be empty (as trace items sent to Zephyr LOG) but logic is running. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Sun May 3 11:18:55 2020 +0100 soc: xtensa: intel: dont use uncache region yet. Some code was still using this region. Use later. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Sun May 3 10:07:28 2020 +0100 soc: xtensa: intel_adsp: fix notifier init Topology now loads. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Fri May 1 21:18:38 2020 +0100 boards: up2: Need to use sof config for bootloader This will need uncoupled at some point. For testing today. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Fri May 1 21:16:38 2020 +0100 boards: up2: increase heap to 128k Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Thu Apr 30 11:35:19 2020 +0300 boards: up_squared_adsp: Use bigger HEAP Use HEAP from old demo. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Fri May 1 16:06:32 2020 +0100 soc: xtensa: intel_adsp: Fix config.h naming collisions Rename sof version to sof-config.h Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Thu Apr 30 11:22:42 2020 +0300 Small cleanups Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Wed Apr 29 22:00:44 2020 +0300 tests: sof/audio: Test ll scheduler Add more tests for scheduler. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Wed Apr 29 18:38:35 2020 +0300 tests: Add first schedule test Add initial test for testing scheduling. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Wed Apr 29 13:36:23 2020 +0100 soc: xtensa: rmeove build warnings Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Apr 28 18:04:33 2020 +0300 soc/intel_adsp: Register sof logging Register sof logging for tracing Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Apr 28 14:16:55 2020 +0300 boards: up_squared_adsp: Define HEAP_MEM_POOL_SIZE Define HEAP_MEM_POOL_SIZE when SOF enabled. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Apr 28 10:09:20 2020 +0300 tests: audio/sof: Add interrupt API for testing Add initial interrupt API for testing. Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Apr 27 15:54:28 2020 +0100 soc: xtensa: adsp: Update linker script for SOF sections. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Apr 27 11:20:01 2020 +0100 soc: xtensa: adsp: send SOF FW metadata as boot message Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Sun Apr 26 21:47:20 2020 +0100 soc: xtensa: adsp: re-enable all SOF IP init. Do all SOF IP init. TODO: ATOMCTL, WFI on LX6 Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Sat Apr 25 15:30:40 2020 +0100 soc: xtensa: irq: Make sure IPC IRQ is registered. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Wed Apr 22 20:56:09 2020 +0300 tests: sof: Enable console Enable console for the test. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Wed Apr 22 17:57:22 2020 +0300 soc: cavs_v15: Fix XTENSA_KERNEL_CPU_PTR_SR Use correct value for XTENSA_KERNEL_CPU_PTR_SR. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Wed Apr 22 14:48:31 2020 +0300 tests: audio/sof: Add tests for alloc API testing Add initial tests for allocation API testing. Can be extended for other later. Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Apr 21 17:49:32 2020 +0300 logging: Enable xtensa simulator backend for ADSP Enable xtensa simulator backend for SOC_FAMILY_INTEL_ADSP. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Apr 20 20:58:30 2020 +0100 soc: xtensa: add common cpu logic Support for additional cores. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Date: Tue Apr 21 10:11:07 2020 +0300 Update west.yaml to point to the latest repo Update west.yaml Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Apr 20 16:17:01 2020 +0100 soc: xtensa: cavs: Fix build for clk.c on cavs18+ Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Apr 20 16:05:31 2020 +0100 soc: xtensa: cavs15: removed unused headers. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Apr 20 16:05:09 2020 +0100 soc: xtensa: cavs25: align with SOF headers Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Apr 20 16:03:52 2020 +0100 soc: xtensa: cavs20: align with SOF headers Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Apr 20 16:03:09 2020 +0100 soc: xtensa: cavs18: Align with SOF headers. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Apr 20 11:42:39 2020 +0100 west: sof: Updated to latest version. Now builds, links and runs SOF code (but not to FW ready). Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Sun Apr 19 13:28:53 2020 +0100 xtensa: intel adsp: build in SOF symbols if CONFIG_SOF Code now fully links against SOF. Needs to be run tested. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Daniel Leung <daniel.leung@intel.com> Date: Wed Apr 15 10:19:28 2020 -0700 DO NOT MERGE: temporarily add thesoftproject as remote for sof module Signed-off-by: Daniel Leung <daniel.leung@intel.com> Author: Daniel Leung <daniel.leung@intel.com> Date: Wed Apr 15 10:33:40 2020 -0700 ipm: cavs_idc: use the IPC/IDC definitions in SoC The SoC definitions have the necessary IPC/IDC bits so there is no need to define them separately. Signed-off-by: Daniel Leung <daniel.leung@intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Wed Apr 15 14:30:20 2020 +0100 TODO: config: Use static config for SOF module. TODO: needs to be generated as part of SOF kconfig Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Fri Apr 10 21:56:07 2020 +0100 HACK: Add SOF into build Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Wed Apr 15 13:55:15 2020 +0100 west: modules: Add SOF audio module. Add support for building SOF as a Zephyr module. This is the starting point for add SOF audio into Zephyr. Currently builds but does not use any symbols yet. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Wed Apr 15 13:48:48 2020 +0100 WIP soc: adsp-cavs15: Use same include directory structure as SOF Use the same directory structure as SOF to simplify porting and allow SOF to build without Zephyr until porting work is complete. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Wed Apr 15 13:43:44 2020 +0100 WIP soc: adsp-common: Use same include directory structure as SOF Use the same directory structure as SOF to simplify porting and allow SOF to build without Zephyr until porting work is complete. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Mar 16 14:36:32 2020 +0000 WIP: soc: adsp-common: cache is common across all Intel ADSP platforms De-duplicate soc.h cache definitions. TODO: this needs done for other common functions. TODO: need to fix include path Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Mar 30 11:07:43 2020 -0700 WIP: soc: cavs25: Import SOF SoC support SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4 Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Mar 30 11:07:12 2020 -0700 WIP: soc: cavs20: Import SOF SoC support SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4 Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Mar 30 11:06:40 2020 -0700 WIP: soc: cavs18: Import SOF SoC support SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4 Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Daniel Leung <daniel.leung@intel.com> Date: Mon Mar 30 12:37:17 2020 -0700 soc: intel_adsp: use main_entry.S in common for cavs_v15 The files are identical anyway. Signed-off-by: Daniel Leung <daniel.leung@intel.com> Author: Daniel Leung <daniel.leung@intel.com> Date: Mon Mar 30 11:38:14 2020 -0700 soc: intel_adsp/cavs_v15: link common code Let cavs_v15 link against the code compiled under common/. Signed-off-by: Daniel Leung <daniel.leung@intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Mar 16 13:08:28 2020 +0000 WIP: soc: common: Import SOF SoC support SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4 Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Mar 16 14:37:32 2020 +0000 WIP soc: adsp-cavs15: build power down support Build the power down support for CAVS1.5 Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Mar 16 12:40:17 2020 +0000 WIP: soc: cavs15: Import SOF SoC support SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4 Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Mar 16 14:30:08 2020 +0000 soc: cavs15: Add missing SHIM registers. SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4 Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Mon Mar 9 15:43:01 2020 +0000 xtensa: intel_adsp/cavs_v15: fix usage of LP SRAM power gating Remove LSPGCTL as it can cause confusion, use SHIM_LSPGCTL instead. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> Date: Wed Feb 26 15:28:48 2020 +0000 boards: up_squared_adsp: Use local xtensa HAL instead of SDK HAL SDK HAL is deprecated for Intel ADSP SoCs so fix and use local HAL module. Signed-off-by: Daniel Leung <daniel.leung@intel.com> Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Author: Daniel Leung <daniel.leung@intel.com> Date: Mon Mar 30 10:45:15 2020 -0700 soc: add Intel Audio DSP SoC family This creates a SoC family for the audio DSPs on various Intel CPUs. The intel_apl_adsp is being moved into this family as well, since it is part of the CAVS v1.5 series of DSPs. Signed-off-by: Daniel Leung <daniel.leung@intel.com> Author: Daniel Leung <daniel.leung@intel.com> Date: Mon Mar 30 11:29:02 2020 -0700 soc: xtensa: add CMakeLists.txt Add CMakeLists.txt under soc/xtensa so that CMakeLists.txt inside each SoC directory will be included, similar to what ARM and RISCV have. Signed-off-by: Daniel Leung <daniel.leung@intel.com> Author: Andy Ross <andrew.j.ross@intel.com> Date: Wed Jun 17 12:30:43 2020 -0700 Revert "boards: up_squared_adsp: Add flasher script" This reverts commit `80f295a9dd`. Author: Andy Ross <andrew.j.ross@intel.com> Date: Wed Jun 17 12:30:32 2020 -0700 Revert "boards: up_squared_adsp: Update logtool tool" This reverts commit `7770d182c1`. Author: Andy Ross <andrew.j.ross@intel.com> Date: Wed Jun 17 12:30:23 2020 -0700 Revert "soc: intel_adsp: Generalize bootloader" This reverts commit `d6a33ef467`. Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> soc: xtensa; intel: remove sof-config.h - SQUASH No longer used. Signed-off-by: Andy Ross <andrew.j.ross@intel.com> Signed-off-by: Anas Nashif <anas.nashif@intel.com>	5 years ago
Tomasz Bursztyka	ef560e0a53	drivers: Manual const-ification of device driver instance These are all the case that coccinelle cannot find as they are inside macro declarations. Fixed via: git grep -rlz -E "\(struct device \*" \| xargs -0 sed -i 's/(struct device/(const struct device/g' Fixes #27399 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>	5 years ago
Tomasz Bursztyka	4dcfb5531c	isr: Normalize usage of device instance through ISR The goal of this patch is to replace the 'void ' parameter by 'struct device ' if they use such variable or just 'const void ' on all relevant ISRs This will avoid not-so-nice const qualifier tweaks when device instances will be constant. Note that only the ISR passed to IRQ_CONNECT are of interest here. In order to do so, the script fix_isr.py below is necessary: from pathlib import Path import subprocess import pickle import mmap import sys import re import os cocci_template = """ @r_fix_isr_0 @ type ret_type; identifier P; identifier D; @@ -ret_type <!fn!>(void P) +ret_type <!fn!>(const struct device P) { ... ( const struct device D = (const struct device )P; \| const struct device D = P; ) ... } @r_fix_isr_1 @ type ret_type; identifier P; identifier D; @@ -ret_type <!fn!>(void P) +ret_type <!fn!>(const struct device P) { ... const struct device D; ... ( D = (const struct device )P; \| D = P; ) ... } @r_fix_isr_2 @ type ret_type; identifier A; @@ -ret_type <!fn!>(void A) +ret_type <!fn!>(const void A) { ... } @r_fix_isr_3 @ const struct device D; @@ -<!fn!>((void )D); +<!fn!>(D); @r_fix_isr_4 @ type ret_type; identifier D; identifier P; @@ -ret_type <!fn!>(const struct device P) +ret_type <!fn!>(const struct device D) { ... ( -const struct device D = (const struct device )P; \| -const struct device D = P; ) ... } @r_fix_isr_5 @ type ret_type; identifier D; identifier P; @@ -ret_type <!fn!>(const struct device P) +ret_type <!fn!>(const struct device D) { ... -const struct device D; ... ( -D = (const struct device *)P; \| -D = P; ) ... } """ def find_isr(fn): db = [] data = None start = 0 try: with open(fn, 'r+') as f: data = str(mmap.mmap(f.fileno(), 0).read()) except Exception as e: return db while True: isr = "" irq = data.find('IRQ_CONNECT', start) while irq > -1: p = 1 arg = 1 p_o = data.find('(', irq) if p_o < 0: irq = -1 break; pos = p_o + 1 while p > 0: if data[pos] == ')': p -= 1 elif data[pos] == '(': p += 1 elif data[pos] == ',' and p == 1: arg += 1 if arg == 3: isr += data[pos] pos += 1 isr = isr.strip(',\\n\\t ') if isr not in db and len(isr) > 0: db.append(isr) start = pos break if irq < 0: break return db def patch_isr(fn, isr_list): if len(isr_list) <= 0: return for isr in isr_list: tmplt = cocci_template.replace('<!fn!>', isr) with open('/tmp/isr_fix.cocci', 'w') as f: f.write(tmplt) cmd = ['spatch', '--sp-file', '/tmp/isr_fix.cocci', '--in-place', fn] subprocess.run(cmd) def process_files(path): if path.is_file() and path.suffix in ['.h', '.c']: p = str(path.parent) + '/' + path.name isr_list = find_isr(p) patch_isr(p, isr_list) elif path.is_dir(): for p in path.iterdir(): process_files(p) if len(sys.argv) < 2: print("You need to provide a dir/file path") sys.exit(1) process_files(Path(sys.argv[1])) And is run: ./fix_isr.py <zephyr root directory> Finally, some files needed manual fixes such. Fixes #27399 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>	5 years ago
Tomasz Bursztyka	e18fcbba5a	device: Const-ify all device driver instance pointers Now that device_api attribute is unmodified at runtime, as well as all the other attributes, it is possible to switch all device driver instance to be constant. A coccinelle rule is used for this: @r_const_dev_1 disable optional_qualifier @ @@ -struct device * +const struct device * @r_const_dev_2 disable optional_qualifier @ @@ -struct device * const +const struct device * Fixes #27399 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>	5 years ago
Tomasz Bursztyka	98d9b01322	device: Apply driver_api/data attributes rename everywhere Via coccinelle: @r_device_driver_api_and_data_1@ struct device *D; @@ ( D-> - driver_api + api \| D-> - driver_data + data ) @r_device_driver_api_and_data_2@ expression E; @@ ( net_if_get_device(E)-> - driver_api + api \| net_if_get_device(E)-> - driver_data + data ) And grep/sed rules for macros: git grep -rlz 'dev)->driver_data' \| xargs -0 sed -i 's/dev)->driver_data/dev)->data/g' git grep -rlz 'dev->driver_data' \| xargs -0 sed -i 's/dev->driver_data/dev->data/g' git grep -rlz 'device->driver_data' \| xargs -0 sed -i 's/device->driver_data/device->data/g' Fixes #27397 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>	5 years ago
Tomasz Bursztyka	af6140cc0d	device: Apply config_info rename everywhere Via coccinelle: @r_device_config@ struct device *D; @@ D-> - config_info + config And 2 grep/sed rules for macros: git grep -rlz 'dev)->config_info' \| xargs -0 sed -i 's/dev)->config_info/dev)->config/g' git grep -rlz 'dev->config_info' \| xargs -0 sed -i 's/dev->config_info/dev->config/g' Fixes #27397 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>	5 years ago
Kumar Gala	a1b77fd589	zephyr: replace zephyr integer types with C99 types git grep -l 'u$8\\|16\\|32\\|64$_t' \| \ xargs sed -i "s/u$8\\|16\\|32\\|64$_t/uint\1_t/g" git grep -l 's$8\\|16\\|32\\|64$_t' \| \ xargs sed -i "s/s$8\\|16\\|32\\|64$_t/int\1_t/g" Signed-off-by: Kumar Gala <kumar.gala@linaro.org>	5 years ago
Martí Bolívar	7e0eed9235	devicetree: allow access to all nodes Usually, we want to operate only on "available" device nodes ("available" means "status is okay and a matching binding is found"), but that's not true in all cases. Sometimes we want to operate on special nodes without matching bindings, such as those describing memory. To handle the distinction, change various additional devicetree APIs making it clear that they operate only on available device nodes, adjusting gen_defines and devicetree.h implementation details accordingly: - emit macros for all existing nodes in gen_defines.py, regardless of status or matching binding - rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY - rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY - rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY - rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY - rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS - resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS - remove DT_COMPAT_ON_BUS as a public API - use the new default_prop_types edtlib parameter Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>	5 years ago
Tomasz Bursztyka	97326c0445	device: Fix structure attributes access Since struct devconfig was merged earlier into struct device, let's fix accessing config_info, name, ... attributes everywhere via: grep -rlZ 'dev->config->' \| xargs -0 sed -i 's/dev->config->/dev->/g' Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>	5 years ago
Kumar Gala	45a014a883	drivers: intc: intc_cavs: Convert to DT_INST Convert driver to use new DT_INST macros throughout. This allows us to also remove dts_fixup.h that are no longer used. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>	5 years ago
Kumar Gala	492fbf7bba	intc: intc_cavs: Use DTS labels for device names Replace Kconfig device names with one's that come from device tree like most all other devices do. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>	5 years ago
Daniel Leung	4b4593e76b	interrupt_controller: cavs: add CPU offset for intel_apl_adsp This adds the per CPU address offset for intel_apl_adsp, so the correct base address can be calculated under SMP. Signed-off-by: Daniel Leung <daniel.leung@intel.com>	5 years ago
Daniel Leung	e6d468ac22	interrupt_controller: cavs: add support in ISR for SMP The CAVS interrupt controller has different base addresses for each CPU. When running under SMP, the driver needs to look at the correct address for the CPU the ISR is running so interrupts can be dispatched correctly. This adds a function to calculate the correct base address. Note that each supported SoC may have different offsets so per SoC config will need to added. Support for intel_s1000 is added as an example. Signed-off-by: Daniel Leung <daniel.leung@intel.com>	5 years ago
Daniel Leung	518f329b3a	interrupt_controller/cavs_ictl: need to be initialized earlier The cavs_ictl interrupt controller is an interrupt aggregator supporting multi-level interrupts. Therefore, it needs to be initialized earlier than any downstream interrupt controllers and devices. Signed-off-by: Daniel Leung <daniel.leung@intel.com>	5 years ago
Tomasz Bursztyka	c30600d4ab	drivers/interrupt_controller: Adopt file naming as other drivers Pattern being <domain>_<model>.<c/h>. Here interrupt_controller as a domain would be far too long so shortening it to "intc", as DTS does actually. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>	6 years ago
Daniel Leung	958f2d5295	drivers/interrupt_controller: cavs_ictl: add get_line_state() This implements the new API to query whether a particular IRQ line is enabled. Signed-off-by: Daniel Leung <daniel.leung@intel.com>	6 years ago
Andrzej Głąbek	20202902f2	dts_fixups: Use DT_ prefix in all defined labels not related to Kconfig These changes were obtained by running a script created by Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following specification: 1. Read the contents of all dts_fixup.h files in Zephyr 2. Check the left-hand side of the #define macros (i.e. the X in #define X Y) 3. Check if that name is also the name of a Kconfig option 3.a If it is, then do nothing 3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it has neither of these two prefixes 4. Replace the use of the changed #define in the code itself (.c, .h, .ld) Additionally, some tweaks had to be added to this script to catch some of the macros used in the code in a parameterized form, e.g.: - CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS - CONFIG_UART_##idx##_TX_PIN - I2C_SBCON_##_num##_BASE_ADDR and to prevent adding DT_ prefix to the following symbols: - FLASH_START - FLASH_SIZE - SRAM_START - SRAM_SIZE - _ROM_ADDR - _ROM_SIZE - _RAM_ADDR - _RAM_SIZE which are surprisingly also defined in some dts_fixup.h files. Finally, some manual corrections had to be done as well: - name##_IRQ -> DT_##name##_IRQ in uart_stm32.c Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>	7 years ago
Kumar Gala	aa2bdbe322	drivers: Remove board.h include We either don't need board.h in the driver or we should be include soc.h instead. Signed-off-by: Kumar Gala <kumar.gala@linaro.org>	7 years ago
Rajavardhan Gundi	74016bb64c	drivers: interrupts: introduce CAVS interrupt logic CAVS interrupt logic is an intel IP that combines several sources of interrupt into one line that is then routed to the parent controller. CAVS stands for "connected Audio, Voice and Speech". This IP supports 4 lines which can have a max of 32 interrupts each. Change-Id: Ia6be51428bedf1011d148ae1fc5d4c34252c05da Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com> Signed-off-by: Anas Nashif <anas.nashif@intel.com>	7 years ago

26 Commits (acc8cb4bc8369f9c9f0ac59bcf2912f51a25db7e)