Defined default values for baudrate, parity, stop bits, and data bits.
This removes complexity and obfuscation from the code.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
Remove address-of operator ('&') when assigning `init_fn`
function pointer in `DEVICE_DT_INST_DEFINE` macro.
This change aims to maintain consistency among the drivers in
`drivers/serial`, ensuring that all function pointer assignments
follow the same pattern.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add clock control support for UART controllers found in i.MX SoC family.
This change moves clock gating out of respective `soc.c` files and into
clock controller's `clock_control_on`/`_off` methods, allowing for
dynamic clock state control, and setup via Device Tree bindings.
This is especially important on SoCs, where Zephyr is sharing the bus
with cores running other OSes, such as might be the case for i.MX 8MM.
Unfortunately, Zephyr doesn't possess an ability to represent clock
hierarchy (e.g. via DT's `assigned-clocks` property), so clock source
and frequency still need to be hardcoded in aforementioned `soc.c`
files.
Signed-off-by: Artur Rojek <artur@conclusive.pl>
soc.h has been removed for ARM64 SoC platforms and it is also needed by
ARM32, so remove it from related drivers.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
MISRA C:2012 Rule 14.4 (The controlling expression of an if statement
and the controlling expression of an iteration-statement shall have
essentially Boolean type.)
Use `do { ... } while (false)' instead of `do { ... } while (0)'.
Use comparisons with zero instead of implicitly testing integers.
The commit is a subset of the original auditable-branch commit:
5d02614e34
Signed-off-by: Simon Hein <SHein@baumer.com>
Adds few missing zephyr/ prefixes to leftover #include statements that
either got added recently or were using double quote format.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Refactors all of the serial drivers to use a shared driver class
initialization priority configuration, CONFIG_SERIAL_INIT_PRIORITY, to
allow configuring serial drivers separately from other devices. This is
similar to other driver classes like I2C and SPI.
The default is set to CONFIG_KERNEL_INIT_PRIORITY_DEVICE to preserve the
existing default initialization priority for most drivers. The one
exception is uart_lpc11u6x.c which previously used
CONFIG_KERNEL_INIT_PRIORITY_OBJECTS.
This change was motivated by an issue on the frdm_k64f board where the
serial driver was incorrectly initialized before the clock control
driver.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
The function uart_irq_rx_ready() should return true if there is data in
the receive buffer, regardless of whether the irq is enabled. Fix the
mcux and rv32m1 shim drivers to implement this behavior correctly.
Prior to this change:
- irq_rx_full() checks if RX data is available
- irq_rx_ready() checks if RX data is available and interrupts are
enabled
After this change:
- irq_rx_full() checks if RX data is available
- irq_rx_ready() renamed to irq_rx_pending() to avoid confusion with the
API ready() function
- API ready() implementation switched to use irq_rx_full()
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
These are all the case that coccinelle cannot find as they are inside
macro declarations.
Fixed via:
git grep -rlz -E "\(struct device \*" |
xargs -0 sed -i 's/(struct device/(const struct device/g'
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add IUART driver based on MCUX SDK. This driver is used to provide
serial console support on i.MX8M Mini SoC.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Yishai Jaffe
Pieter De Gendt
Zheng Wu
Pisit Sawangvonganan
Daniel Fladerer
Artur Rojek
Gerard Marull-Paretas
Jiafei Pan
Henrik Brix Andersen
Simon Hein
Fabio Baltieri
Daniel DeGrasse
Maureen Helm
Kumar Gala
Maureen Helm
Tomasz Bursztyka
Anas Nashif
Manivannan Sadhasivam