Added queue for memory slab addresses to ensure that they
are released in correct order. Improved formula for frequency
scaling for nRF54H20. Fixed alternative channel mapping.
Signed-off-by: Michał Stasiak <michal.stasiak@nordicsemi.no>
Change erroneous mask in wm8904_volume_config. Extend
WM8904_REGVAL_INSEL. Unflip register mask and value parameters.
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Use shell_device_get_binding() instead of device_get_binding() so that
we get the device based on its name and in addition by its label.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
The `default y`, which is coupled with
`depends on DT_HAS_WOLFSON_WM8904_ENABLED` to link the settings with
DeviceTree, which was missing, so I added it.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Currently the dmic_nrfx_pdm read implementation treats a timeout as an
error, in that a logging error message is produced when no PDM data is
available. However, for non-(or minimally-)blocking applications this is
normal behavior. Classified this way, the logger is flooded with error
messages unnecessarily, unless the log level is changed for the dmic
module, which is not desirable.
This modification simply changes the log-level to debug so the
application user can then decide whether or not a failed read needs to
produce an error message.
Signed-off-by: Anthony Wertz <awertz@pm.me>
Driver now uses multi-instance PDM nrfx API and
defines PDM device based on available instances.
It also introduces calculating PDM frequency using
prescaler, present on nRF54L15 FP1.
Updated nrfx API version changed to 3.7 to use the
new PDM API.
Signed-off-by: Michał Stasiak <michal.stasiak@nordicsemi.no>
The Drivers using Pinctrl should be turning Pinctrl on
this should not be the responsibility of the board. This
commit removes CONFIG_PINCTRL from the boards side for nxp boards.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
The Open_PDM_Filter_64/128() functions of the third-party OpenPDMFilter
library are designed to handle a fixed PCM block size of 1 ms of audio.
Allow the MPxxDTyy drivers to use a block size of more than 1 ms by
calling the filtering function multiple times, once for each ms of
audio.
Fixeszephyrproject-rtos/zephyr#69447
Signed-off-by: Petar Susac <petar.susac@byte-lab.com>
Mute GPIO mutes both channel 1 and channel 2.
So, only control it when all channels have to be muted.
Signed-off-by: Benjamin Lemouzy <blemouzy@centralp.fr>
Add driver for NXP DMIC peripheral. This peripheral is present on the
iMX RT5xx and iMX RT6xx parts, as well as some LPC SOCs. The following
features are supported:
- up to 2 simultaneous channels of L/R PCM data (4 channels are not
supported due to limitations of the DMA engine)
- individual configuration of gain and filter parameters for each DMIC
channel input
The driver has been tested with up to 4 PCM data streams (2 L/R channels),
as well as the MEMS microphones present on the RT595 EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Co-authored-by: Yves Vandervennet <yves.vandervennet@nxp.com>
This commit fixes the following compiler warnings:
* implicit declaration of function 'strtoul'; did you mean 'strtok'?
* passing argument 2 of 'parse_named_int' discards 'const' qualifier
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Do not enable subsystem/driver shell modules by default and stop abusing
CONFIG_SHELL_MINIMAL, which is internal to the shell subsystem, to decide
when to enable a driver shell.
The list of shell modules has grown considerably through the
years. Enabling CONFIG_SHELL for doing e.g. an interactive debug session
leads to a large number of shell modules also being enabled unless
explicitly disabled, which again leads to non-negligible increases in
RAM/ROM usage.
This commit attempts to establish a policy of subsystem/driver shell
modules being disabled by default, requiring the user/application to
explicitly enable only those needed.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Drivers for nRF SoCs using pinctrl did not select PINCTRL. This means
boards are forced to enable PINCTRL.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Modify the signature of the k_mem_slab_free() function with a new one,
replacing the old void **mem with void *mem as a parameter.
The following function:
void k_mem_slab_free(struct k_mem_slab *slab, void **mem);
has the wrong signature. mem is only used as a regular pointer, so there
is no need to use a double-pointer. The correct signature should be:
void k_mem_slab_free(struct k_mem_slab *slab, void *mem);
The issue with the current signature, although functional, is that it is
extremely confusing. I myself, a veteran Zephyr developer, was confused
by this parameter when looking at it recently.
All in-tree uses of the function have been adapted.
Fixes#61888.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Many areas of Zephyr divide and round up without using the DIV_ROUND_UP
macro. Make use of it, so that we make use of a tested system macro and
at the same time we make code more readable.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Unify the drivers/*/Kconfig menuconfig title strings to the format
"<class> [(acronym)] [bus] drivers".
Including both the full name of the driver class and an acronym makes
menuconfig more user friendly as some of the acronyms are less well-known
than others. It also improves Kconfig search, both via menuconfig and via
the generated Kconfig documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Since PINCTRL and pinctrl-0 is now required, there's no point in doing
extra validation at driver level. Modify the macro to just check that
sleep state is present when needed, since it was the only remaining
assertion that was not covered. Renamed the macro to make it more clear
what it does: NRF_DT_CHECK_NODE_HAS_PINCTRL_SLEEP
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When the PAUSE or STOP command was triggered, the driver was first
requesting the PDM peripheral to stop by calling nrfx_pdm_stop() and
then it was setting a flag that was in turn checked in an interrupt
that was generated when the PDM actually stopped (what happens a moment
after the stop request is made). But that setting of the flag could get
preempted and the interrupt handler could get executed first causing
the stopping to be not handled properly and leaving the driver falsely
considering the peripheral as still active.
This commit reverses the order of these two operations to avoid
the described race condition.
Same sequence is corrected also in event_handler(), but this is
done only for consistency (it is in the interrupt handler itself
so there is no race possible in this case).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
* Utilize DT_HAS_<COMPAT>_ENABLED for devicetree based drivers
* Move to using 'select I2C'/'select I2S' instead of 'depends on'
(see commit df81fef944 for
more details)
Signed-off-by: Kumar Gala <galak@kernel.org>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Instead of selecting appropriate HAS_HW_NRF_* options for particular
nRF SoCs (and simulated nRF52 target), set their values basing on
information from devicetree.
Correct also semantics of those options so that they are set only when
a corresponding DT node is enabled. This allows using them directly in
Kconfig dependencies of Zephyr drivers for nRF peripherals. Update
appropriately these dependencies.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Extend the macro with checks for DT properties related to pin
assignments that are defined but would be ignored, depending on
whether PINCTRL is enabled or not, what presumably indicates
a resulting configuration different from what the user expects.
Add also a possibility to indicate that the pinctrl-1 property
should not be checked because the caller does not support the
sleep state.
Rename the macro so that its name better reflects its function.
Update accordingly all drivers that use it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add support for the new pinctrl API to the DMIC driver that handles
the nRF PDM peripheral. Update code of the driver and the related
devicetree binding.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Shims for nrfx drivers should only connect the related IRQ handlers,
they should not enable the IRQs, as this could lead to a situation
where the interrupt handler is called before the driver had a chance
to properly initialize the peripheral and install the provided event
handler. nrfx drivers will enable the interrupts appropriately on
their own by calling the NRFX_IRQ_ENABLE macro which is implemented
in nrfx_glue.h as a call to irq_enable().
This commit fixes the above issue spotted in the following shims:
- dmic_nrfx_pdm
- clock_control_nrf
- i2s_nrfx
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The device configuration field access was dropping const qualifier for
no reason, don't do that.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use struct i2c_dt_spec to simplify code. This change also allows to drop
device_get_binding usage.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The bus device can be obtained at compile time, so use DEVICE_DT_GET
instead. Device configuration is now used to store the bus device
reference.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a shim that allows using the nrfx PDM driver via the Zephyr API.
Add also missing devicetree nodes representing the PDM peripherals
in the nRF52 Series SoCs.
Extend the "nordic,nrf-pdm" binding with a new property that allows
specifying the clock source to be used by the PDM peripheral (so that
it is possible to use HFXO for better accuracy of the peripheral clock
or, in the nRF53 Series SoCs, to use the dedicated audio oscillator).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The AUDIO_DMIC INIT_PRIORITY definition is set to 60 by default,
but this value is causing dmic drivers to be initialized prior to
i2s, to which they are dependent from.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Michał Stasiak
Florijan Plohl
Adrian Bonislawski
Vit Stanicek
Titouan Christophe
Michal Bukowski
Yishai Jaffe
TOKITA Hiroshi
Anthony Wertz
Emilio Benavente
Gerard Marull-Paretas
Yong Cong Sin
Lingao Meng
Petar Susac
Benjamin Lemouzy
Daniel DeGrasse
Pieter De Gendt
Henrik Brix Andersen
Carles Cufi
Nick Ward
Gerard Marull-Paretas
Andrzej Głąbek
Kumar Gala
Anas Nashif
Nazar Kazakov
Armando Visconti