Add a snippet for Wi-Fi credentials support. Update the heap sizes as
required for enterprise mode.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Enable connecting native sim to a physical board running hci_uart
without usage of Bumble or other intermediary steps, but rather using
common h4 hardware driver.
Most commonly used port is USB CDC-ACM, as by default for most nRF
boards.
Signed-off-by: Dmitrii Sharshakov <d3dx12.xx@gmail.com>
Add snippet that can be used to enable packet trace output from
Silicon Labs Series 2 devices.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Make the video software generator a devicetree node, which allows enabling
several instances, and select it as chosen { zephyr,camera = &... }; node.
It can be enabled via a `video-sw-generator` snippet.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Inclusion of CONFIG_WIFI_SHELL_RUNTIME_CERTIFICATES causes build time
RAM overflow issues. Decrease NRF_WIFI_DATA_HEAP_SIZE to accommodate
the RUNTIME_CERTIFICATES feature.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Instead of having an overlay move the Enterprise configurations to a
dedicated snippet so that it can be enabled with any sample.
Can be used along with Wi-Fi snippet e.g., `-S
"wifi-ipv4;wifi-enterprise"`.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Introduce a snippet for configuring IPv4 and IPv6 over Wi-Fi support
in networking samples.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Snippet that helps to build USB device samples with virtual device and
host controllers and USBIP support.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
When using this snippet with Zperf a boot warning is seen, fix the
warning by increasing the sockets.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Deprecate BT_CTLR, and add a new HAS_BT_CTLR as a virtual option which
specific users (like BT_LL_SW_SPLIT) select. This also means that we can
remove all places that were forcefully enabling the BT_CTLR option, and
instead we now depend on devicetree to get some local LL HCI driver
enabled which in turn also enables the HAS_BT_CTLR option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Introduce etrbuffer in the tddconf bindings to support flexible
placement in the memory map.
Signed-off-by: Karsten Koenig <karsten.koenig@nordicsemi.no>
Add a new snippet to enable serial console. Even though most Zephyr
boards enable this by default, the same is not true for many real
boards, where enabling UART can increase power consumption. Having
this snippet may become handy on such scenarios. We could also
consider cleaning up upstream boards by just enabling this snippet
by default.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
- Title underline too long
- Remove redundant how-to-use snippet bit, this can be documented
generically for all snippets instead of repeating it everywhere.
- Snippet does not redirect anything.
- RTT does not require HW support for console.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
There's no point in disabling serial when enabling RTT. They are
not incompatible between each other.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
By defining this snippet it becomes simpler to build an application
for the Zephyr Bluetooth Controller in environments
where this is not enabled in device tree by default.
It removes the need for adding boilerplate overlay files
to applications.
Also, we would be able to add this snippet by default for
samples and tests where it is required to use the zephyr
link layer.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Enable CONFIG_CONSOLE in the Segger RTT console snippet as this is a
dependency for CONFIG_RTT_CONSOLE.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
UART asynchronous API will ensure highest throughput but it is not
necessary as polling API is also supported as a fallback. Do not
enforce use of asynchronous API as there might be cases when polling
might be used (e.g. to reduce memory footprint).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
For nrf54h20 a range of combinations exist to configure the test and
debug domains data sources and sinks. Expose them in DTS to allow
configuring them. Also drop the previous style which was too rigid to
extend to cover all cases cleanly. The old style was only used in a
single sample application so far.
Signed-off-by: Karsten Koenig <karsten.koenig@nordicsemi.no>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add overlays for booting PPR on the `nrf9280pdk/nrf9280/cpuapp` target.
They are identical to the nRF54H ones because of similar DT structure.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Add snippet which allows configuration of logging using STMESP
frontend using standalone mode.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
These were copied-over from cdc-acm-console by mistake. It's not valid
for this snippet, therefore it's being removed.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
The ram-console snippet disabled UART console and enabled the
RAM console with the option link the RAM console buffer to a
dedicate section in a new added memory-region.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
To allow easily building samples using the shell, without needing to
specify additional configurations. Tested with:
```
west build -b nrf52840dk/nrf52840 \
-S nus-console` \
samples/subsys/shell/shell_module
```
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Add support of rcar_spider_ca55 to xen_dom0 snippet.
Disable CONFIG_UART_INTERRUPT_DRIVEN for xen_dom0, because
xen dom0 consoleio doesn't support interrupt driven mode.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
Allowing to be applied on various samples to enable UART over Bluetooth
LE NUS without added complexity.
Tested with nrf52840dk/nrf52840 on the following samples:
- samples/subsys/console/echo.
- samples/subsys/console/getchar.
- samples/subsys/console/getline.
- samples/subsys/logging/logger.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Karol Lasończyk
Ravi Dondaputi
Dmitrii Sharshakov
Aksel Skauge Mellbye
Josuah Demangeon
Marek Matej
Chaitanya Tata
Jukka Rissanen
Adam Kondraciuk
Michał Stasiak
Johann Fischer
Johan Hedberg
Karsten Koenig
Marcin Szymczyk
Gerard Marull-Paretas
Rubin Gerritsen
Maureen Helm
Henrik Brix Andersen
Carles Cufi
Robert Lubos
Krzysztof Chruściński
Benjamin Cabé
Grzegorz Swiderski
Luis Ubieda
Jakub Zymelka
Hou Zhiqiang
Helmut Lord
Mykola Kvach