TLS_CREDENTIAL_SERVER_CERTIFICATE credential type is misleading, as in
fact it just represents a public certificate, it does not matter if the
certificate belongs to a server or a client. And actually, it was
already used in-tree for clients as well, for example in LwM2M.
Therefore rename the credential type to a more generic
TLS_CREDENTIAL_PUBLIC_CERTIFICATE and deprecate the old one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The TOOLCHAIN_DISABLE_WARNING/TOOLCHAIN_ENABLE_WARNING macros are easier
to read and compiler agnostic.
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Added configuration for new audio PLL service.
Pull in new service implementation in new hal nordic.
Signed-off-by: Łukasz Stępnicki <lukasz.stepnicki@nordicsemi.no>
Added Kconfig options to allow use of TWIM frequency
workaround in NRFX for nRF52 and nRF53.
Signed-off-by: Michał Stasiak <michal.stasiak@nordicsemi.no>
This is to fix the below compiler warning from TF-M builds
that don't use the Ethos-U driver.
```
CMake Warning:
Manually-specified variables were not used by the project:
ETHOS_DRIVER_PATH
```
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Add a Kconfig option to match the Mbed TLS define
instead of defining it based on CONFIG_SECURE_STORAGE.
This gives more flexibility regarding the potential re-definition of the
CONFIG_MBEDTLS_PSA_CRYPTO_STORAGE_C Kconfig option.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add interrupt controller driver support for RZ/N2L
Signed-off-by: Quang Le <quang.le.eb@bp.renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Add serial driver support for RZ/N2L
Signed-off-by: Hoang Nguyen <hoang.nguyen.jx@bp.renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Add DMA driver support for Renesas RZ/G3S
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
-Mbed TLS has come up with its own naming-convention with regards
to certain Mbed TLS configurations for TLS/DTLS and X.509. This
commit fixes a couple of them by depending on MBEDTLS_BUILTIN
which is set when Kconfig.tls-generic is used
1. Make MBEDTLS_PEM_CERTIFICATE_FORMAT depend on MBEDTLS_BUILTIN
The proper name for this functionaity is MBEDTL_PEM_PARSE_C and
MBEDTLS_PEM_WRITE_C
2. Make MBEDTLS_SERVER_NAME_INDICATION depend on MBEDTLS_BUILTIN
The proper name for this is MBEDTLS_SSL_SERVER_NAME_INDICATION
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
-PSA_WANT_ALG_CMAC must be set for PSA_WANT_ALG_PBKDF2_AES_CMAC_PRF_128
to be valid. This commit fixes this mismatch for hostap
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
MDK 8.70.0 introduced following changes in the device naming:
- renamed nRF54L20 Eng A to nRF54LM20A Eng A
- renamed nRF54L09 Eng A to nRF54LV10A Eng A
Actual SoC renaming will happen in followup PR.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
As of today, nrfx components are selectable depending if devicetree has
a certain compatible or not, and in case of IP that can operate in
multiple modes, nodelabel+compatible. An example of the later is:
```
config NRFX_SPI0
bool "SPI0 driver instance"
depends on $(dt_nodelabel_has_compat,spi0,$(DT_COMPAT_NORDIC_NRF_SPI))
select NRFX_SPI
config NRFX_SPIM0
bool "SPIM0 driver instance"
depends on $(dt_nodelabel_has_compat,spi0,$(DT_COMPAT_NORDIC_NRF_SPIM))
select NRFX_SPIM
config NRFX_SPIS0
bool "SPIS0 driver instance"
depends on $(dt_nodelabel_has_compat,spi0,$(DT_COMPAT_NORDIC_NRF_SPIS))
select NRFX_SPIS
```
These symbols are later selected by e.g. SPI driver if `spi0` node is
enabled. While this works in the Zephyr context, it can be a problem in
applications using nrfx directly in the application layer, unless they
tweak devicetree. For example, if devicetree `spi0` node defaults to
`compatible = "nordic,nrf-spim"`, NRFX_SPI0 or NRFX_SPIS0 won't be
selectable, but an application using nrfx directly doesn't really care
about what is defined in devicetree as it is effectively bypassing it.
It just wants to select e.g. `CONFIG_NRFX_SPI0=y` and forget about the
rest.
This patch fixes this problem by just checking for the existence of
certain nodelabels.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Added additional analog channels for ADC and COMP/LPCOMP and new pin
functionality mapping for TDM.
Signed-off-by: Karsten Koenig <karsten.koenig@nordicsemi.no>
Remove `select FILE_SYSTEM` from `WIFI_NM_WPA_SUPPLICANT`, originally
added in 3fc932c5. The selection is not required by any tests, and does
not appear to be used by any code in the module.
Signed-off-by: Jordan Yates <jordan@embeint.com>
CMSIS modules dsp and nn sets the optimization flag -Ofast for their
libraries. I've now made a new compiler property optimization_fast to
avoid using ifdefs in the cmsis CMakeLists.txt files.
I've update GCC and arcmwdt (not sure if arcmwdt supports -Ofast)
Signed-off-by: Lars-Ove Karlsson <lars-ove.karlsson@iar.com>
A PSA crypto operation object can be initialized in multiple
ways according to the documentation. For example,
1. Using a dedicated psa_xxx_operation_init() function that
returns an initialized object.
2. Using memset() to zero out the operation object.
For some PSA crypto driver implementations, using the first
method causes an excessive stack usage if the operation
object is large and psa_xxx_operation_init() is not inlined.
Instead, it is better to stick to memset() for this purpose.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
To ensure that the accesses to the radio peripheral are done with
predictable timings, the constant latency must be enabled.
The constant latency mode is enabled alongside the HFXO.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Added option to retry message send over ipc when for example
there is -ENOMEM error (shared memory buffer full).
Number of max retries and delay between them are Kconfigs.
Fixed nrfs error reporting when sending directly over
ipc service, status was not correct when negative value
was returned from ipc service send function.
Signed-off-by: Łukasz Stępnicki <lukasz.stepnicki@nordicsemi.no>
Added CONFIG_AMBIQ_COMPONENT_USE_BT and CONFIG_SOC_AMBIQ_BT_SUPPORTED
to fix empty zephyr_library() warning when BLE is not needed for compile.
Added CMake message if BT related Ambiq specific Kconfig is overriden for
not supported SoC.
Signed-off-by: Swift Tian <swift.tian@ambiq.com>
With introduction of OSAL wrapper for memory allocation, usage of
zephyr's native malloc calls need to be removed. When NRF70 driver
is not enabled, OSAL needs to be built explicitly.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Create dedicated memory pools for Wi-Fi management and
data operations (defaults: 20KB for management and 130KB for data).
Setting Data pool to 110KB for non-Nordic SOCs to resolve
RAM overflows seen in twister runs.
Remove the `HEAP_MEM_POOL_ADD_SIZE_NRF70` hint since we are
creating separate heaps for driver and not allocating from
system heap.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Drop the override conditions to ADC_MCUX_12B1MSPS_SAR for imxrt, the
current one causes the driver to be built when it does not have to and
are not needed anyway, and drop the HAS_MCUX_12B1MSPS_SAR option
entirely as it's not needed anymore.
Tested with:
west build -p -b teensy40 tests/lib/devicetree/api_ext
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Enable MBEDTLS_SHA384 support to use of RSA3K + Suite-B, that
is required by WPA3-Enterprise.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
The segger cmake linker script is out of date compared to
segger_rtt.ld. This is causing linker failures with IAR
when segger is enabled (on nrf hardware for example).
Signed-off-by: Carl Eriksson Skogh <carl.erikssonskogh@gmail.com>
Deprecate NRFS_LOCAL_DOMAIN_DVFS_SCALE_DOWN_AFTER_INIT option for
scaling down CPU frequency during dvfs handler initialization.
Clock control API is managing access to DVFS and DVFS should not
be controlled bypassing this API. Deprecated feature will be added in
the clock control.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
We need to make sure that within Zephyr different users of the PSA APIs
don't interfere with each other because of using the same numerical IDs
for persistent assets.
This takes care of the PSA key IDs when using persistent keys through
the PSA Crypto API.
See the comments in `<zephyr/psa/key_ids.h>` for more information.
This removes the recently-introduced Kconfig options that allowed changing
the base IDs subsystems were using for their persistent keys.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Pull latest revision of the uoscore-uedhoc module and align
corresponding CMake file with the changes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Honor Kconfig option `BT_CTLR_TX_PWR_ANTENNA` for limiting the maximum TX
power. The default value for this option is 0 dBm, which means that after
this change the actual TX power is likely lower than before, unless
increased by this option.
Signed-off-by: Kalle Kietäväinen <kalle.kietavainen@silabs.com>
Introduce two new kconfig options in order
to be able to define custom named fatfs
mount points. If activated replace the static
FF_VOLUME_STRS approach with the runtime
generated VolumeStr array containing those
mount points.
Signed-off-by: Carlo Kirchmeier <carlo.kirchmeier@zuehlke.com>
Add Clock Control driver support for Renesas RZ/G3S
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Robert Lubos
Tom Hughes
Łukasz Stępnicki
Michał Stasiak
The Nguyen
Sudan Landge
Sai Santhosh Malae
Tomi Fontanilles
Camille BAUD
Quang Le
Hoang Nguyen
Tien Nguyen
Hui Bai
Khoa Nguyen
Frank Audun Kvamtrø
Phuc Pham
Nikodem Kastelik
Gerard Marull-Paretas
Karsten Koenig
Jordan Yates
Lars-Ove Karlsson
Damian Krolik
Robin Kastberg
Rafał Kuźnia
TOKITA Hiroshi
Swift Tian
Ravi Dondaputi
Chaitanya Tata
Marcel Graber
Fabio Baltieri
Carl Eriksson Skogh
Benjamin Cabé
Jiawei Yang
Rafal Dyla
Dominik Ermel
Krzysztof Chruściński
Kalle Kietäväinen
Carlo Kirchmeier