The max size was determined by looking at the ARCH of the cpu. This really
comes from the ip configuration when generated. Add `max-xfer-size`
property to the devicetree.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
The old CONFIG_UART_NS16550_ACCESS_IOPORT has been used to
indicate whether to access the NS16550 UART via IO port
before device tree is used to describe hardware. Now we have
device tree, and we can specify whether a particular UART
needs to be accessed via IO port using property io-mapped.
Therefore, CONFIG_UART_NS16550_ACCESS_IOPORT is no longer
needed (and thus also CONFIG_UART_NS16550_SIMULT_ACCESS).
Remove these two kconfigs and modify code to use device tree
to figure out how to access the UART hardware.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Introduce DesignWare ARC Data Fusion IP Subsystem(DFSS) SPI
driver for ARC boards, i.e. EMSDP, which uses DW SPI to controll
SPI-Flash and DFSS SPI to connect external devices. Both drivers
share most source code, but DFSS uses ARC auxiliary registers.
Move FIFO depth setting to device tree.
Signed-off-by: Siyuan Cheng <siyuanc@synopsys.com>
There is a spi-flash fl256s on emsdp board, which can be
contolled by DesignWare SPI driver. Now add DW SPI and
SPI-FLASH support for emsdp board.
Signed-off-by: Siyuan Cheng <siyuanc@synopsys.com>
ICI (Inter-Core Interrupt Unit) interrupts and priorities were hardcoded
in C files. This patch moves this information to Devicetree and updates
code to make use of it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
sysconf base address was hardcoded in <soc.h>. Create a new compatible
and define it in Devicetree, where hardware needs to be described.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe secure timer0 instead of hardcoding values in
<soc.h>.
DT files have been structured to match the following requirements: In
case of sectimer0 - it's should be only enabled for:
- emsdp_em7d_esp.dts
- em_starterkit_em7d.dts
- nsim_sem_mpu_stack_guard.dts
- nsim_sem.dts
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use DT_INST_FOREACH_STATUS_OKAY to reduce duplicated code for each
instance.
We make interrupts optional since they aren't always available.
Signed-off-by: Kumar Gala <galak@kernel.org>
The ns16550 flags reg-shift property as optional. In case it is not
supplied, the ns16550 driver relies on a value defined in <soc.h>, or,
by default it takes 4 (shift by 2).
This patch adds the property to all ns16550 nodes, with the following
values:
- 2 if SoC did not have any custom value defined by
UART_REG_ADDR_INTERVAL (corresponds to 1 << 2 = 4)
- If SoC defined DEFAULT_REG_INTERVAL (snps_arc_iot/it8xxx2), use such
value (4=2, 2=1, 1=0).
These changes will allow simplifying the ns16550 driver.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Pinmux is deprecated (see #39740) so let's get rid of
it's usage for HSDK board.
As we call pinmux only once at init phase we simply do
register setup in platform code instead of pinmux.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Jilay Pandya
Ryan McClelland
Daniel Leung
Siyuan Cheng
Nikolay Agishev
Gerard Marull-Paretas
Kumar Gala
Evgeniy Paltsev
Maureen Helm