ENET timestamp IRQ still needed to be enabled from IP.
This is a fix-up for below commit:
faa55bd44b drivers: ptp_clock_nxp_enet: avoid configuring
IRQ handlers again
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Assertion checked whether pointer is NULL.
Assertion should check whether pointer is *not* NULL.
Fixed by changing check in assertion.
Signed-off-by: Frank Duerr <frank.duerr@ipvs.uni-stuttgart.de>
Converted ENET_Ptp1588Configure to ENET_Ptp1588StartTimer during reset.
This is to avoid configuring IRQ handlers again in hal driver with
ENET_Ptp1588Configure.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
The rate adjustment should be based on nomianl frequency, but not
current frequency. Then any PTP stack with PID control could adjust
frequency well.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
The enet handle in mac driver was not shared with ptp driver
properly. This was causing wrong TX timestamp.
This patch is to fix it.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
The Drivers using Pinctrl should be turning Pinctrl on
this should not be the responsibility of the board. This
commit removes CONFIG_PINCTRL from the boards side for nxp boards.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
c8d8dce755 introduced a regression whereby driver config should hold
module device pointer, except it didn't.
This commit adds module_dev to the driver config.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
1. Correct node label in k64 overlay for ptp test
- Not sure if this actually matters since it appears
that actual hardware is no longer tested in net tests
2. Include fsl_enet with <> instead of "".
3. Build the ptp clock driver only if the ethernet driver is built
- Technically I think the 1588 timer should be able to be used
even if the ethernet mac is not used, but I would imagine this
to be an extraordinarily rare, weird, and niche use case, so to fix
the current CI error caused by net test disabling ethernet drivers,
couple the ptp clock driver to the ethernet driver in the build
configuration.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The dependencies should be in a 'depends on' clause.
Also, 'depends on PTP_CLOCK' is redundant because this is
within 'if PTP_CLOCK' already.
Additionally, conditionally include the PTP header in the mac driver.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Simplify the driver header implementation, so that there are not
structs and unions different per each situtaion, and make just one
function for the enet module drivers to call on each other. Also,
capitalize existing enums.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Move the syscall_handler.h header, used internally only to a dedicated
internal folder that should not be used outside of Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds a few line use zephyr_syscall_header() to include
headers containing syscall function prototypes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Unify the drivers/*/Kconfig menuconfig title strings to the format
"<class> [(acronym)] [bus] drivers".
Including both the full name of the driver class and an acronym makes
menuconfig more user friendly as some of the acronyms are less well-known
than others. It also improves Kconfig search, both via menuconfig and via
the generated Kconfig documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Move ptp_clock.h out of the top level include/ dir into
include/drivers/ptp_clock.h and deprecated the old location.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Defining a symbol with 'menuconfig' just tells the menuconfig to display
any dependent symbols that immediately follow it in a separate menu.
'menuconfig' has no effect on symbol values.
Making a symbol that doesn't have any dependent symbols after it a
'menuconfig' should be avoided, because then you end up with an empty
menu, which is shown as e.g.
[*] Enable foo ---
This is how it would be shown if there were children but they all
happened to be invisible as well.
With a regular 'config', it turns into
[*] Enable foo
Change all pointless 'menuconfig's to 'config's.
See the section on 'menuconfig' on the Kconfig - Tips and Best Practices
page as well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
System call arguments, at the arch layer, are single words. So
passing wider values requires splitting them into two registers at
call time. This gets even more complicated for values (e.g
k_timeout_t) that may have different sizes depending on configuration.
This patch adds a feature to gen_syscalls.py to detect functions with
wide arguments and automatically generates code to split/unsplit them.
Unfortunately the current scheme of Z_SYSCALL_DECLARE_* macros won't
work with functions like this, because for N arguments (our current
maximum N is 10) there are 2^N possible configurations of argument
widths. So this generates the complete functions for each handler and
wrapper, effectively doing in python what was originally done in the
preprocessor.
Another complexity is that traditional the z_hdlr_*() function for a
system call has taken the raw list of word arguments, which does not
work when some of those arguments must be 64 bit types. So instead of
using a single Z_SYSCALL_HANDLER macro, this splits the job of
z_hdlr_*() into two steps: An automatically-generated unmarshalling
function, z_mrsh_*(), which then calls a user-supplied verification
function z_vrfy_*(). The verification function is typesafe, and is a
simple C function with exactly the same argument and return signature
as the syscall impl function. It is also not responsible for
validating the pointers to the extra parameter array or a wide return
value, that code gets automatically generated.
This commit includes new vrfy/msrh handling for all syscalls invoked
during CI runs. Future commits will port the less testable code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
It is useful that the ptp_clock_get() function can be called from
the userspace. Create also unit test for calling that function
from userspace.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Defines a PTP clock driver that can be implemented in those network
interface drivers that provide gPTP support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Julien Chevrier <julien.chevrier@intel.com>
Qiang Zhao
Yangbo Lu
Frank Duerr
Jamie McCrae
Pieter De Gendt
Emilio Benavente
Benjamin Cabé
Jiafei Pan
Yong Cong Sin
Declan Snyder
Anas Nashif
Daniel Leung
Henrik Brix Andersen
Gerard Marull-Paretas
Kumar Gala
Tomasz Bursztyka
Ulf Magnusson
Andy Ross
Jukka Rissanen