- Installing python3-venv should be done right when all dependencies are
installed.
- Installing python3-venv is enough to pull wheel, setuptools
(python3-setuptools-whl), and pip (python3-pip-whl) so that they are
available in the venv, so reduce the list of packages to install
accordingly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Ubuntu 20.04 has entered "security fixes only" mode since May 2025, so
we can simplify the getting started guide by making the instructions
apply to 22.04 and onwards, and remove the instructions for adding
Kitware APT repository in the process.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
When building the docs for a release, the section of the getting started
that lets the user `west init` their workspace now has them check out
the version matchin the release.
Fixeszephyrproject-rtos/zephyr#92163
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add references to new API, functions, devicetree bindings introduced
from introduction of the UVC class.
Signed-off-by: Josuah Demangeon <me@josuah.net>
This reverts commit 043bb58488.
Note that scripts/requirements-actions.txt might not be 100% the same
as what was pinned prior to the revert due to it being difficult to
restore previous versions while also accounting for the new dependencies
that were added in the meantime.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fix a broken link in the 'contribute/proposals_and_rfcs.rst' file that
pointed to a non-existent Markdown RFC template.
The link previously pointed to:
.github/ISSUE_TEMPLATE/003_rfc-proposal.md
It has been corrected to point to the actual YAML file:
.github/ISSUE_TEMPLATE/003_rfc-proposal.yml
Fixes: #92342
Signed-off-by: Gaetan Perrot <gaetan.perrot@spacecubics.com>
The LTDC RGB565 format corresponds to the PIXEL_FORMAT_BGR565 format.
Update the LTDC driver to advertise PIXEL_FORMAT_BGR565 as the supported
format instead of PIXEL_FORMAT_RGB565. This change ensures correct color
rendering in the sample display application and enables usage of the
video capture sample application.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Clarify expectations about the recently modified default variant of the
board.
Update migration guide to warn existing users about the change.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Emphasize the role of maintainers in upholding the project's code of
conduct and fostering an inclusive environment for all.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add information about hostap IPC mechanism change that can save up to
6-8 kB memory when using native wifi stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Utilize a code spell-checking tool to scan for and correct spelling errors
in various files within the `doc` directory.
In `dsa_txrx_process.svg`, correct the typo `Tansmit` to `Transmit`.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This snippet got introduced, and is not a breaking change for C APIs but
still introduce a change of command line to use for building projects,
so add a migration guide entry.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Fixes#92059
Update getting started guide, migration-guide and
python.cmake to use Python 3.12.1 as minimum supported
version
Signed-off-by: Tu Nguyen Van <tu.nguyenvan@nxp.com>
Add dt_compat_enabled_num Kconfig helper function for counting the number
of compatible nodes with status okay.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Allow overriding puncover default host and port. Using
PUNCOVER_HOST/PUNCOVER_PORT it is possible now to set the host and port
to something else other than the default.
example:
export PUNCOVER_HOST=10.0.1.1
export PUNCOVER_PORT=8088
will start puncover on 10.0.1.1:8088 and make it available over the
local network.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Following the addition of USB Video Class, this adds a sample that makes
use of the zephyr,camera chosen node of any board to stream the video
source to the host. A snippet video-sw-generator can be used to test
and debug devices without a zephyr,camera chosen node.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Report the error state to the UpdateHub server before triggering a rollback
in autohandler mode. This prevents the server from redeploying the same
(failed) update after rollback, avoiding update loops. Also exposes a new
public syscall: updatehub_report_error(), allowing manual mode users to
report an error explicitly.
Signed-off-by: Adrien Maillard <adrien.maillard@edu.hefr.ch>
List NEORV32 v1.11.6 as the currently supported version. No changes to the
in-tree drivers needed for the changes between v1.11.3 and v1.11.6.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Updated the contribution guidelines to specify that pseudo or anonymized
emails (e.g., GitHub noreply addresses) are not allowed for commits.
Signed-off-by: Maxwell Weru <mburumaxwell@gmail.com>
Add information how the DNS reconfiguration API functions
dns_resolve_reconfigure() and dns_resolve_reconfigure_with_interfaces()
have changed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Commit adds information about the removal of
the TinyCrypt crypto in Bluetooth Mesh.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The `zephyr-env.sh` script was adjusted to look for the zephyrrc file in
three locations following the [XDG Base Directory Specification]. The
documentation of the environment variables is now adjusted to reflect that
change.
[XDG Base Directory Specification]: (https://specifications.freedesktop.org/basedir-spec/latest/)
Signed-off-by: Andreas Schuster <andreas.schuster@schuam.de>
Adds a reference to west rtt as alternative to using putty. Also provides
a command that prints supported rtt runners for the specific build.
This issue is encountered now with the nRF54L1, for example, because
the nrfutil runner does not support RTT at this time.
Signed-off-by: Helmut Lord <kellyhlord@gmail.com>
- Update to use ETHOS_U config instead of ARM_ETHOS_U
- Update prefix ETHOS_U_ for all configs that use ARM_ETHOS_U_
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Add bullets to release notes for sys_clock_gettime(),
sys_clock_settime(), and sys_clock_nanosleep().
These changes were significant, as they make timekeeping dependencies
more independent between libc and posix, and remove several unnecessary
dependencies on posix for ISO C library routines.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add the ST-Link GDB server (part of the STM32CubeCLT) as west runner.
The STM32CubeCLT is an all-in-one multi-OS command-line toolset, which is
part of the STM32Cube ecosystem, and notably includes a GDB server for
debugging using ST-Link probes.
This runner supports the "attach", "debug" and "debugserver" commands.
Documentation: https://www.st.com/en/development-tools/stm32cubeclt.html
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Allows application code to control allocation of buffers of optional
resources.
Y value, Z value, min range value, max range value resources are
optional.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
Benjamin Cabé
Josuah Demangeon
Gaetan Perrot
Alain Volmat
Kapil Bhatt
Erwan Gouriou
Jukka Rissanen
Pisit Sawangvonganan
Cong Nguyen Huu
Fabio Baltieri
Tu Nguyen Van
Henrik Brix Andersen
Jérôme Pouiller
Anas Nashif
Bjarki Arge Andreasen
Adrien Maillard
Henrik Brix Andersen
Flavio Ceolin
Camille BAUD
Maxwell Weru
Aleksandr Khromykh
Andreas Schuster
Helmut Lord
Khoa Nguyen
Zhang Xingtao
Chris Friedt
Francois Ramu
Johan Hedberg
Sergei Ovchinnikov
Mathieu Choplain
Nick Ward
Jilay Pandya