- Fixed the partition sizes in the comments
- Updated the second partition base address to be correct
The layout now matches the Arduino Nano Matter
which was used for reference.
Signed-off-by: Tamas Jozsi <tamas.jozsi@silabs.com>
These are equivalent and there's adapters on the market, having a single
label allows using it shields with any other board with connectorized
i2c busses.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Avoid the individual `CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC` for each
board instead to referencing the dt value.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Fix board DTS coding style issues to prevent them from spreading when a
new board is introduced and uses an existing DTS as a referance.
Issues addressed from Zephyr devicetree style guidelines [1]:
- Don’t insert empty lines before a deindenting };.
- Insert a single empty line to separate nodes at the same hierarchy
level.
- status is "okay" by default.
- compatible property comes first in node.
- reg property comes second in node.
- status property comes last in node.
- the rest of the properties within are nodes naturally sorted.
- child nodes are sorted by address or alphabetically if there is no
address.
No functional change.
Link: https://docs.zephyrproject.org/latest/contribute/style/devicetree.html [1]
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
ESP32-C6 now supports both HP and LP core app.
This fixes and updates XIAO board to support that as well.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add .. zephyr:board-supported-runners:: to the Programming and Debugging
section of the documentation for each board that has one such section,
as this is the most natural place to put it.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Enable wifi node in all procpu dts, so Wi-Fi could be enabled simply by
enabling the CONFIG_WIFI. In turn some sample code overlay files can be
dismissed.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Nordic has a new tool, nRF Util (`nrfutil`) which is replacing the
previous set of command-line tools (particularly `nrfjprog`) that Zephyr
had been using by default in many of the boards to flash the firmware
onto the device.
Since nRF Util is already mature and is going to be replacing the existing
tools, including `nrfjprog`, it is now a good time to change the default
flash tool to reflect this fact.
Note that `nrfjprog` support is not being removed at all, but this may
be a breaking change for users that do not have nRF Util installed. For
this reason we also add a note in the migration guide.
More info:
https://devzone.nordicsemi.com/nordic/nordic-blog/b/blog/posts/nrf-util-unified-command-line-utility
Installation:
https://www.nordicsemi.com/Products/Development-tools/nrf-util
Documentation:
https://docs.nordicsemi.com/bundle/nrfutil/page/README.html
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace manually authored "Supported Features" tables with the new Zephyr
board supported hardware directive which automatically generates an
up-to-date table based on the boards' Devicetree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
There were some inconsistencies in flash memory for both
of these boards where they do not match their stated specs.
This commit fixes the inconsistencies.
Signed-off-by: Nicolas Munnich <nickmunnich@gmail.com>
Mark interfaces on XIAO header that are supported by each board. This
allows to filter by them (with depends_on) when running twister.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This commit removes all references to the `xtools` toolchain variant in the
board YAML files.
Note that the `xtools` toolchain variant has been deprecated since Zephyr
v3.3.0 and now removed.
The removal process was automated using the following command line:
git grep -l xtools -- boards/*.{yml,yaml} | \
xargs -n 1 -P $(nproc) \
yq -i 'del(.toolchain[] | select(. == "xtools"))'
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In all STM32 dtsi and board dts, update the st,adc-sequencer and the
st,adc-clock-source properties so they are strings.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
fu dts: arm: st: use string instead of enum
Remove all USB and CDC ACM configuration in favor of common
configuraiton.
Do not adapt board-specific configurations such as unknown PID/VID or
string descriptors. There is no justification for using them on specific
boards, and we do not have formal approval to use them in the project
tree. Also, we need more uniform configuration, since the main reason
for enabling CDC ACM here is to allow users to run examples like
hello_world right out of the box. Of course, anyone is free to customize
these settings in their fork or downstream project.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Correct "zephyr,sram" property under /chosen node to make board and samples
compatible with new SoC memory description.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
No in-tree board uses this driver's pinctrl functionality, and every
RP2040-based board was configuring this to be an empty node in the
device tree, so remove them.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Follow the wider directory convention of dts/<arch>/<vendor>/<family>.
This is foundation work ahead of introducing support for the RP2350.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Deprecate BT_CTLR, and add a new HAS_BT_CTLR as a virtual option which
specific users (like BT_LL_SW_SPLIT) select. This also means that we can
remove all places that were forcefully enabling the BT_CTLR option, and
instead we now depend on devicetree to get some local LL HCI driver
enabled which in turn also enables the HAS_BT_CTLR option.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
* Replace copies of fixed-partitions nodes in related boards by
referencing the apropriate partition table from the available list.
* For better reference the `partitions_*.dtsi` file has boot offset,
purpose and the flash size encoded in the file name. Default flash size
is considered to be 4MB.
* Added the flash size node for the boards which are not based on the
module.
* Removed flash size registry from the esp32.*common.dtsi
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Use configdefault when enabling LV_COLOR_SWAP_16 within boards and
shield definitions, to avoid OR'ing the dependencies for the Kconfig
symbol. Otherwise, a user manually selecting LV_COLOR_DEPTH will
encounter build errors as LV_COLOR_SWAP_16 may be enabled when
LV_COLOR_DEPTH_16 is not selected
Fixes#81546
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Fix missing flash and code partition.
Add missing dts entries and use common partition tables to all related
non-Espressif boards, previously ommited.
Add uart1 node in pinctrl for APPCPU.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Remove CONFIG_SDMMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the sdmmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
sdmmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The Seeed Studio XIAO ESP32S3 Sense board is a board based on the XIAO
ESP32S3 board with a soldered B2B connector that allows to connect
an extension board with a camera sensor, microphone and the sdcard slot.
Signed-off-by: Patryk Biel <pbiel7@gmail.com>
For the "References" section to be useful, it needs to include a call to
the target-notes directive, which is the one that actually generates the
list of references made in the current document.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixes selection of a symbol that was done in a defconfig file,
when actually it should be done in a Kconfig file as a dependency
for the board
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This updates the documentation of all the Seeed Studio boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Full name was set based on the information available either in board
documentation or in Twister files.
Whenever applicable, vendor name was dropped from the full name so that
all boards have a consistent naming scheme.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
HEAP_MEM_POOL_ADD_SIZE_BOARD is not a zephyr-defined entry and
should be placed into Kconfig instead of Kconfig.defconfig.
This PR moves that entry for all ESP32-based boards accordingly.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
These test features are not required and are not used in any USB samples
or tests.
Follow-up on commit 0809b75b42 ("boards: remove test feature usb_cdc")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Common uf2 partition configurations to avoid duplication in boards.
There appears to be a bit of confusion about exactly what a proper
UF2 partition map looks like for the nrf52840, so common dts
configurations should help to avoid confusion.
Configuration for SoftDevice v6 and v7 provided as thats what was
fouond in use in tree already.
Signed-off-by: Jacob Winther <jacob@9.nz>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to the Hello World sample in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This PR updates all Espressif board names to meet its
original value. It also update reference links, re-organize
entries and removes unused content.
This also fixes bootloader information regarding a few boards.
IDF Bootloader was removed and these boards kept that info.
This updated it accordingly with the Simpleboot Bootloader.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
QSPI sleep now set QSPI CS pin to pull-up, decreasing
current consumption.
Co-authored-by: Vidar Berg <vidar.berg@nordicsemi.no>
Signed-off-by: Sigurd Hellesvik <sigurd.hellesvik@nordicsemi.no>
Sylvio Alves
Tamas Jozsi
Martin Jäger
Fabio Baltieri
TOKITA Hiroshi
Yishai Jaffe
Aksel Skauge Mellbye
Peter Johanson
Benjamin Cabé
Marek Matej
Carles Cufi
Nicolas Munnich
Marcin Niestroj
Jamie McCrae
Stephanos Ioannidis
Romain Pelletant
Guillaume Gautier
Johann Fischer
Xudong Zheng
Marcio Ribeiro
Andrew Featherstone
Johan Hedberg
Mario Paja
Daniel DeGrasse
Patryk Biel
Jacob Winther
Sigurd Hellesvik