boards: xtensa: esp32s3_luatos_core: Convert to v2

Converts the board to hwmv2

Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>

boards/boards_legacy/xtensa/esp32s3_luatos_core/Kconfig.board

@@ -1,15 +0,0 @@
-# Copyright (c) 2023 YuLong Yao <feilongphone@gmail.com>
-# SPDX-License-Identifier: Apache-2.0
-
-# ESP32S3 Core board configuration
-config BOARD_ESP32S3_LUATOS_CORE
-	bool "ESP32S3 LuatOS Core Board with ch343 enabled"
-	depends on SOC_SERIES_ESP32S3
-
-config BOARD_ESP32S3_LUATOS_CORE_USB
-	bool "ESP32S3 LuatOS Core Board with ch343 disabled"
-	depends on SOC_SERIES_ESP32S3
-
-choice SOC_PART_NUMBER
-	default SOC_ESP32S3_MINI_N8
-endchoice

boards/boards_legacy/xtensa/esp32s3_luatos_core/Kconfig.defconfig

@@ -1,22 +0,0 @@
-# ESP32S3 Core board configuration
-
-# Copyright (c) 2023 YuLong Yao <feilongphone@gmail.com>
-# SPDX-License-Identifier: Apache-2.0
-
-config BOARD
-	default "esp32s3_luatos_core"
-	depends on BOARD_ESP32S3_LUATOS_CORE || BOARD_ESP32S3_LUATOS_CORE_USB
-
-config ENTROPY_GENERATOR
-	default y
-
-config HEAP_MEM_POOL_ADD_SIZE_BOARD
-	int
-	default 65535 if WIFI && BT
-	default 51200 if WIFI
-	default 40960 if BT
-	default 4096
-
-choice BT_HCI_BUS_TYPE
-	default BT_ESP32 if BT
-endchoice

boards/luatos/esp32s3_luatos_core/Kconfig

@@ -0,0 +1,6 @@
+# Copyright (c) 2024 Espressif Systems (Shanghai) Co., Ltd.
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_ESP32S3_LUATOS_CORE
+	select SOC_ESP32S3_PROCPU if BOARD_ESP32S3_LUATOS_CORE_ESP32S3_PROCPU || BOARD_ESP32S3_LUATOS_CORE_ESP32S3_PROCPU_USB
+	select SOC_ESP32S3_APPCPU if BOARD_ESP32S3_LUATOS_CORE_ESP32S3_APPCPU || BOARD_ESP32S3_LUATOS_CORE_ESP32S3_APPCPU_USB

boards/luatos/esp32s3_luatos_core/Kconfig.defconfig

@@ -0,0 +1,26 @@
+# ESP32S3 Core board configuration
+
+# Copyright (c) 2023 YuLong Yao <feilongphone@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+if BOARD_ESP32S3_LUATOS_CORE_ESP32S3_PROCPU || BOARD_ESP32S3_LUATOS_CORE_ESP32S3_PROCPU_USB
+
+config HEAP_MEM_POOL_ADD_SIZE_BOARD
+	int
+	default 65535 if WIFI && BT
+	default 51200 if WIFI
+	default 40960 if BT
+	default 4096
+
+choice BT_HCI_BUS_TYPE
+	default BT_ESP32 if BT
+endchoice
+
+endif # BOARD_ESP32S3_LUATOS_CORE_ESP32S3_PROCPU || BOARD_ESP32S3_LUATOS_CORE_ESP32S3_PROCPU_USB
+
+if BOARD_ESP32S3_LUATOS_CORE_ESP32S3_APPCPU || BOARD_ESP32S3_LUATOS_CORE_ESP32S3_APPCPU_USB
+
+config HEAP_MEM_POOL_ADD_SIZE_BOARD
+	default 256
+
+endif # BOARD_ESP32S3_LUATOS_CORE_ESP32S3_APPCPU || BOARD_ESP32S3_LUATOS_CORE_ESP32S3_APPCPU_USB

boards/luatos/esp32s3_luatos_core/Kconfig.esp32s3_luatos_core

@@ -0,0 +1,5 @@
+# Copyright (c) 2023 YuLong Yao <feilongphone@gmail.com>
+# SPDX-License-Identifier: Apache-2.0
+
+config BOARD_ESP32S3_LUATOS_CORE
+	select SOC_ESP32S3_MINI_N8

boards/luatos/esp32s3_luatos_core/board.yml

@@ -0,0 +1,10 @@
+board:
+  name: esp32s3_luatos_core
+  vendor: luatos
+  socs:
+  - name: esp32s3
+    variants:
+    - name: usb
+      cpucluster: procpu
+    - name: usb
+      cpucluster: appcpu

boards/luatos/esp32s3_luatos_core/doc/index.rst

@@ -188,9 +188,9 @@ Zephyr build. Output is structured by the domain subdirectories:
 
   build/
   ├── hello_world
-  │   └── zephyr
-  │       ├── zephyr.elf
-  │       └── zephyr.bin
+  │   └── zephyr
+  │       ├── zephyr.elf
+  │       └── zephyr.bin
   ├── mcuboot
   │    └── zephyr
   │       ├── zephyr.elf
@@ -222,14 +222,14 @@ Build and flash applications as usual (see :ref:`build_an_application` and
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
-   :board: esp32s3_luatos_core
+   :board: esp32s3_luatos_core/esp32s3/procpu
    :goals: build
 
 If CH343 chip is disabled, You need use the following command to build:
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
-   :board: esp32s3_luatos_core_usb
+   :board: esp32s3_luatos_core_usb/esp32s3/procpu
    :goals: build
 
 The usual ``flash`` target will work with the ``esp32s3_luatos_core`` board
@@ -238,7 +238,7 @@ application.
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
-   :board: esp32s3_luatos_core
+   :board: esp32s3_luatos_core/esp32s3/procpu
    :goals: flash
 
 Open the serial monitor using the following command:
@@ -270,14 +270,14 @@ Here is an example for building the :ref:`hello_world` application.
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
-   :board: esp32s3_luatos_core
+   :board: esp32s3_luatos_core/esp32s3/procpu
    :goals: build flash
 
 You can debug an application in the usual way. Here is an example for the :ref:`hello_world` application.
 
 .. zephyr-app-commands::
    :zephyr-app: samples/hello_world
-   :board: esp32s3_luatos_core
+   :board: esp32s3_luatos_core/esp32s3/procpu
    :goals: debug
 
 .. _`JTAG debugging for ESP32-S3`: https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/api-guides/jtag-debugging/

boards/luatos/esp32s3_luatos_core/esp32s3_luatos_core_esp32s3_appcpu.dts

@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2023 Espressif Systems (Shanghai) Co., Ltd.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+/dts-v1/;
+
+#include <espressif/esp32s3/esp32s3_appcpu.dtsi>
+/ {
+	model = "ESP32S3 Luatos Core APPCPU";
+	compatible = "espressif,esp32s3";
+
+	chosen {
+		zephyr,sram = &sram0;
+		zephyr,ipc_shm = &shm0;
+		zephyr,ipc = &ipm0;
+	};
+};
+
+&cpu0 {
+	clock-frequency = <ESP32_CLK_CPU_240M>;
+};
+
+&cpu1 {
+	clock-frequency = <ESP32_CLK_CPU_240M>;
+};
+
+&trng0 {
+	status = "okay";
+};
+
+&ipm0 {
+	status = "okay";
+};
+
+&flash0 {
+	status = "okay";
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* Reserve 64kB for the bootloader */
+		boot_partition: partition@0 {
+			label = "mcuboot";
+			reg = <0x00000000 0x00010000>;
+			read-only;
+		};
+
+		/* Reserve 1024kB for the application in slot 0 */
+		slot0_partition: partition@10000 {
+			label = "image-0";
+			reg = <0x00010000 0x00100000>;
+		};
+
+		/* Reserve 1024kB for the application in slot 1 */
+		slot1_partition: partition@110000 {
+			label = "image-1";
+			reg = <0x00110000 0x00100000>;
+		};
+
+		/* Reserve 256kB for the scratch partition */
+		scratch_partition: partition@210000 {
+			   label = "image-scratch";
+			   reg = <0x00210000 0x00040000>;
+		};
+
+		storage_partition: partition@250000 {
+			label = "storage";
+			reg = <0x00250000 0x00006000>;
+		};
+	};
+};

boards/luatos/esp32s3_luatos_core/esp32s3_luatos_core_esp32s3_appcpu.yaml

@@ -0,0 +1,27 @@
+identifier: esp32s3_luatos_core/esp32s3/appcpu
+name: ESP32-S3 LuatOS Core
+type: mcu
+arch: xtensa
+toolchain:
+  - zephyr
+supported:
+  - uart
+testing:
+  ignore_tags:
+    - net
+    - bluetooth
+    - flash
+    - cpp
+    - posix
+    - watchdog
+    - logging
+    - kernel
+    - pm
+    - gpio
+    - crypto
+    - eeprom
+    - heap
+    - cmsis_rtos
+    - jwt
+    - zdsp
+vendor: luatos

boards/luatos/esp32s3_luatos_core/esp32s3_luatos_core_esp32s3_appcpu_defconfig

@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: Apache-2.0
+
+CONFIG_MAIN_STACK_SIZE=2048
+CONFIG_CLOCK_CONTROL=y
+CONFIG_MINIMAL_LIBC=y

boards/luatos/esp32s3_luatos_core/esp32s3_luatos_core_esp32s3_appcpu_usb.dts

@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2023 Espressif Systems (Shanghai) Co., Ltd.
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+/dts-v1/;
+
+#include <espressif/esp32s3/esp32s3_appcpu.dtsi>
+/ {
+	model = "ESP32S3 Luatos Core USB APPCPU";
+	compatible = "espressif,esp32s3";
+
+	chosen {
+		zephyr,sram = &sram0;
+		zephyr,ipc_shm = &shm0;
+		zephyr,ipc = &ipm0;
+	};
+};
+
+&cpu0 {
+	clock-frequency = <ESP32_CLK_CPU_240M>;
+};
+
+&cpu1 {
+	clock-frequency = <ESP32_CLK_CPU_240M>;
+};
+
+&trng0 {
+	status = "okay";
+};
+
+&ipm0 {
+	status = "okay";
+};
+
+&flash0 {
+	status = "okay";
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* Reserve 64kB for the bootloader */
+		boot_partition: partition@0 {
+			label = "mcuboot";
+			reg = <0x00000000 0x00010000>;
+			read-only;
+		};
+
+		/* Reserve 1024kB for the application in slot 0 */
+		slot0_partition: partition@10000 {
+			label = "image-0";
+			reg = <0x00010000 0x00100000>;
+		};
+
+		/* Reserve 1024kB for the application in slot 1 */
+		slot1_partition: partition@110000 {
+			label = "image-1";
+			reg = <0x00110000 0x00100000>;
+		};
+
+		/* Reserve 256kB for the scratch partition */
+		scratch_partition: partition@210000 {
+			   label = "image-scratch";
+			   reg = <0x00210000 0x00040000>;
+		};
+
+		storage_partition: partition@250000 {
+			label = "storage";
+			reg = <0x00250000 0x00006000>;
+		};
+	};
+};

boards/luatos/esp32s3_luatos_core/esp32s3_luatos_core_esp32s3_appcpu_usb.yaml

@@ -0,0 +1,27 @@
+identifier: esp32s3_luatos_core/esp32s3/appcpu/usb
+name: ESP32-S3 LuatOS Core USB
+type: mcu
+arch: xtensa
+toolchain:
+  - zephyr
+supported:
+  - uart
+testing:
+  ignore_tags:
+    - net
+    - bluetooth
+    - flash
+    - cpp
+    - posix
+    - watchdog
+    - logging
+    - kernel
+    - pm
+    - gpio
+    - crypto
+    - eeprom
+    - heap
+    - cmsis_rtos
+    - jwt
+    - zdsp
+vendor: luatos

boards/luatos/esp32s3_luatos_core/esp32s3_luatos_core_esp32s3_appcpu_usb_defconfig

@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: Apache-2.0
+
+CONFIG_MAIN_STACK_SIZE=2048
+CONFIG_CLOCK_CONTROL=y
+CONFIG_MINIMAL_LIBC=y

boards/luatos/esp32s3_luatos_core/esp32s3_luatos_core_esp32s3_procpu.dts

@@ -8,7 +8,7 @@
 #include "esp32s3_luatos_core.dtsi"
 
 / {
-	model = "esp32s3_luatos_core";
+	model = "ESP32S3 Luatos Core PROCPU";
 	compatible = "espressif,esp32s3";
 
 	aliases {

boards/luatos/esp32s3_luatos_core/esp32s3_luatos_core_esp32s3_procpu.yaml

@@ -1,5 +1,5 @@
-identifier: esp32s3_luatos_core
-name: ESP32-S3 Core
+identifier: esp32s3_luatos_core/esp32s3/procpu
+name: ESP32-S3 LuatOS Core
 type: mcu
 arch: xtensa
 toolchain:
@@ -19,4 +19,4 @@ testing:
   ignore_tags:
     - net
     - bluetooth
-vendor: espressif
+vendor: luatos

boards/luatos/esp32s3_luatos_core/esp32s3_luatos_core_esp32s3_procpu_defconfig

@@ -1,8 +1,5 @@
 # SPDX-License-Identifier: Apache-2.0
 
-CONFIG_BOARD_ESP32S3_LUATOS_CORE=y
-CONFIG_SOC_SERIES_ESP32S3=y
-
 CONFIG_MAIN_STACK_SIZE=2048
 
 CONFIG_CONSOLE=y

boards/luatos/esp32s3_luatos_core/esp32s3_luatos_core_esp32s3_procpu_usb.dts

@@ -8,7 +8,7 @@
 #include "esp32s3_luatos_core.dtsi"
 
 / {
-	model = "esp32s3_luatos_core";
+	model = "ESP32S3 Luatos Core USB PROCPU";
 	compatible = "espressif,esp32s3";
 
 	aliases {

boards/luatos/esp32s3_luatos_core/esp32s3_luatos_core_esp32s3_procpu_usb.yaml

@@ -1,5 +1,5 @@
-identifier: esp32s3_luatos_core_usb
-name: ESP32-S3 Core USB
+identifier: esp32s3_luatos_core/esp32s3/procpu/usb
+name: ESP32-S3 LuatOS Core USB
 type: mcu
 arch: xtensa
 toolchain:
@@ -19,4 +19,4 @@ testing:
   ignore_tags:
     - net
     - bluetooth
-vendor: espressif
+vendor: luatos

boards/luatos/esp32s3_luatos_core/esp32s3_luatos_core_esp32s3_procpu_usb_defconfig

@@ -1,8 +1,5 @@
 # SPDX-License-Identifier: Apache-2.0
 
-CONFIG_BOARD_ESP32S3_LUATOS_CORE=y
-CONFIG_SOC_SERIES_ESP32S3=y
-
 CONFIG_MAIN_STACK_SIZE=2048
 
 CONFIG_CONSOLE=y