Browse Source
Support for the cy8cmbr3xxx input driver is added. Signed-off-by: Matthias Alleman <matthias.alleman@basalte.be>pull/84300/head
Matthias Alleman
6 months ago
committed by
Benjamin Cabé
6 changed files with 530 additions and 0 deletions
@ -0,0 +1,11 @@ |
|||||||
|
# Copyright (c) 2025 Basalte bv |
||||||
|
# SPDX-License-Identifier: Apache-2.0 |
||||||
|
|
||||||
|
config INPUT_CY8CMBR3XXX |
||||||
|
bool "CY8CMBR3XXX capacitive touch sensor driver" |
||||||
|
default y |
||||||
|
depends on DT_HAS_CYPRESS_CY8CMBR3XXX_ENABLED |
||||||
|
select I2C |
||||||
|
help |
||||||
|
Enable driver for cypress CY8CMBR3XXX capacitive |
||||||
|
touch sensor. |
||||||
@ -0,0 +1,445 @@ |
|||||||
|
/*
|
||||||
|
* Copyright (c) 2025 Basalte bv |
||||||
|
* |
||||||
|
* SPDX-License-Identifier: Apache-2.0 |
||||||
|
*/ |
||||||
|
|
||||||
|
#define DT_DRV_COMPAT cypress_cy8cmbr3xxx |
||||||
|
|
||||||
|
#include <zephyr/drivers/gpio.h> |
||||||
|
#include <zephyr/drivers/i2c.h> |
||||||
|
#include <zephyr/input/cy8cmbr3xxx.h> |
||||||
|
#include <zephyr/input/input.h> |
||||||
|
#include <zephyr/logging/log.h> |
||||||
|
|
||||||
|
LOG_MODULE_REGISTER(cy8cmbr3xxx, CONFIG_INPUT_LOG_LEVEL); |
||||||
|
|
||||||
|
#define CY8CMBR3XXX_SENSOR_EN 0x00 |
||||||
|
#define CY8CMBR3XXX_FSS_EN 0x02 |
||||||
|
#define CY8CMBR3XXX_TOGGLE_EN 0x04 |
||||||
|
#define CY8CMBR3XXX_LED_ON_EN 0x06 |
||||||
|
#define CY8CMBR3XXX_SENSITIVITY0 0x08 |
||||||
|
#define CY8CMBR3XXX_SENSITIVITY1 0x09 |
||||||
|
#define CY8CMBR3XXX_SENSITIVITY2 0x0A |
||||||
|
#define CY8CMBR3XXX_SENSITIVITY3 0x0B |
||||||
|
#define CY8CMBR3XXX_BASE_THRESHOLD0 0x0C |
||||||
|
#define CY8CMBR3XXX_BASE_THRESHOLD1 0x0D |
||||||
|
#define CY8CMBR3XXX_FINGER_THRESHOLD2 0x0E |
||||||
|
#define CY8CMBR3XXX_FINGER_THRESHOLD3 0x0F |
||||||
|
#define CY8CMBR3XXX_FINGER_THRESHOLD4 0x10 |
||||||
|
#define CY8CMBR3XXX_FINGER_THRESHOLD5 0x11 |
||||||
|
#define CY8CMBR3XXX_FINGER_THRESHOLD6 0x12 |
||||||
|
#define CY8CMBR3XXX_FINGER_THRESHOLD7 0x13 |
||||||
|
#define CY8CMBR3XXX_FINGER_THRESHOLD8 0x14 |
||||||
|
#define CY8CMBR3XXX_FINGER_THRESHOLD9 0x15 |
||||||
|
#define CY8CMBR3XXX_FINGER_THRESHOLD10 0x16 |
||||||
|
#define CY8CMBR3XXX_FINGER_THRESHOLD11 0x17 |
||||||
|
#define CY8CMBR3XXX_FINGER_THRESHOLD12 0x18 |
||||||
|
#define CY8CMBR3XXX_FINGER_THRESHOLD13 0x19 |
||||||
|
#define CY8CMBR3XXX_FINGER_THRESHOLD14 0x1A |
||||||
|
#define CY8CMBR3XXX_FINGER_THRESHOLD15 0x1B |
||||||
|
#define CY8CMBR3XXX_SENSOR_DEBOUNCE 0x1C |
||||||
|
#define CY8CMBR3XXX_BUTTON_HYS 0x1D |
||||||
|
#define CY8CMBR3XXX_BUTTON_LBR 0x1F |
||||||
|
#define CY8CMBR3XXX_BUTTON_NNT 0x20 |
||||||
|
#define CY8CMBR3XXX_BUTTON_NT 0x21 |
||||||
|
#define CY8CMBR3XXX_PROX_EN 0x26 |
||||||
|
#define CY8CMBR3XXX_PROX_CFG 0x27 |
||||||
|
#define CY8CMBR3XXX_PROX_CFG2 0x28 |
||||||
|
#define CY8CMBR3XXX_PROX_TOUCH_TH0 0x2A |
||||||
|
#define CY8CMBR3XXX_PROX_TOUCH_TH1 0x2C |
||||||
|
#define CY8CMBR3XXX_PROX_RESOLUTION0 0x2E |
||||||
|
#define CY8CMBR3XXX_PROX_RESOLUTION1 0x2F |
||||||
|
#define CY8CMBR3XXX_PROX_HYS 0x30 |
||||||
|
#define CY8CMBR3XXX_PROX_LBR 0x32 |
||||||
|
#define CY8CMBR3XXX_PROX_NNT 0x33 |
||||||
|
#define CY8CMBR3XXX_PROX_NT 0x34 |
||||||
|
#define CY8CMBR3XXX_PROX_POSITIVE_TH0 0x35 |
||||||
|
#define CY8CMBR3XXX_PROX_POSITIVE_TH1 0x36 |
||||||
|
#define CY8CMBR3XXX_PROX_NEGATIVE_TH0 0x39 |
||||||
|
#define CY8CMBR3XXX_PROX_NEGATIVE_TH1 0x3A |
||||||
|
#define CY8CMBR3XXX_LED_ON_TIME 0x3D |
||||||
|
#define CY8CMBR3XXX_BUZZER_CFG 0x3E |
||||||
|
#define CY8CMBR3XXX_BUZZER_ON_TIME 0x3F |
||||||
|
#define CY8CMBR3XXX_GPO_CFG 0x40 |
||||||
|
#define CY8CMBR3XXX_PWM_DUTYCYCLE_CFG0 0x41 |
||||||
|
#define CY8CMBR3XXX_PWM_DUTYCYCLE_CFG1 0x42 |
||||||
|
#define CY8CMBR3XXX_PWM_DUTYCYCLE_CFG2 0x43 |
||||||
|
#define CY8CMBR3XXX_PWM_DUTYCYCLE_CFG3 0x44 |
||||||
|
#define CY8CMBR3XXX_PWM_DUTYCYCLE_CFG4 0x45 |
||||||
|
#define CY8CMBR3XXX_PWM_DUTYCYCLE_CFG5 0x46 |
||||||
|
#define CY8CMBR3XXX_PWM_DUTYCYCLE_CFG6 0x47 |
||||||
|
#define CY8CMBR3XXX_PWM_DUTYCYCLE_CFG7 0x48 |
||||||
|
#define CY8CMBR3XXX_SPO_CFG 0x4C |
||||||
|
#define CY8CMBR3XXX_DEVICE_CFG0 0x4D |
||||||
|
#define CY8CMBR3XXX_DEVICE_CFG1 0x4E |
||||||
|
#define CY8CMBR3XXX_DEVICE_CFG2 0x4F |
||||||
|
#define CY8CMBR3XXX_DEVICE_CFG3 0x50 |
||||||
|
#define CY8CMBR3XXX_I2C_ADDR 0x51 |
||||||
|
#define CY8CMBR3XXX_REFRESH_CTRL 0x52 |
||||||
|
#define CY8CMBR3XXX_STATE_TIMEOUT 0x55 |
||||||
|
#define CY8CMBR3XXX_SLIDER_CFG 0x5D |
||||||
|
#define CY8CMBR3XXX_SLIDER1_CFG 0x61 |
||||||
|
#define CY8CMBR3XXX_SLIDER1_RESOLUTION 0x62 |
||||||
|
#define CY8CMBR3XXX_SLIDER1_THRESHOLD 0x63 |
||||||
|
#define CY8CMBR3XXX_SLIDER2_CFG 0x67 |
||||||
|
#define CY8CMBR3XXX_SLIDER2_RESOLUTION 0x68 |
||||||
|
#define CY8CMBR3XXX_SLIDER2_THRESHOLD 0x69 |
||||||
|
#define CY8CMBR3XXX_SLIDER_LBR 0x71 |
||||||
|
#define CY8CMBR3XXX_SLIDER_NNT 0x72 |
||||||
|
#define CY8CMBR3XXX_SLIDER_NT 0x73 |
||||||
|
#define CY8CMBR3XXX_SCRATCHPAD0 0x7A |
||||||
|
#define CY8CMBR3XXX_SCRATCHPAD1 0x7B |
||||||
|
#define CY8CMBR3XXX_CONFIG_CRC 0x7E |
||||||
|
#define CY8CMBR3XXX_GPO_OUTPUT_STATE 0x80 |
||||||
|
#define CY8CMBR3XXX_SENSOR_ID 0x82 |
||||||
|
#define CY8CMBR3XXX_CTRL_CMD 0x86 |
||||||
|
#define CY8CMBR3XXX_CTRL_CMD_STATUS 0x88 |
||||||
|
#define CY8CMBR3XXX_CTRL_CMD_ERR 0x89 |
||||||
|
#define CY8CMBR3XXX_SYSTEM_STATUS 0x8A |
||||||
|
#define CY8CMBR3XXX_PREV_CTRL_CMD_CODE 0x8C |
||||||
|
#define CY8CMBR3XXX_FAMILY_ID 0x8F |
||||||
|
#define CY8CMBR3XXX_DEVICE_ID 0x90 |
||||||
|
#define CY8CMBR3XXX_DEVICE_REV 0x92 |
||||||
|
#define CY8CMBR3XXX_CALC_CRC 0x94 |
||||||
|
#define CY8CMBR3XXX_TOTAL_WORKING_SNS 0x97 |
||||||
|
#define CY8CMBR3XXX_SNS_CP_HIGH 0x98 |
||||||
|
#define CY8CMBR3XXX_SNS_VDD_SHORT 0x9A |
||||||
|
#define CY8CMBR3XXX_SNS_GND_SHORT 0x9C |
||||||
|
#define CY8CMBR3XXX_SNS_SNS_SHORT 0x9E |
||||||
|
#define CY8CMBR3XXX_CMOD_SHIELD_TEST 0xA0 |
||||||
|
#define CY8CMBR3XXX_BUTTON_STAT 0xAA |
||||||
|
#define CY8CMBR3XXX_LATCHED_BUTTON_STAT 0xAC |
||||||
|
#define CY8CMBR3XXX_PROX_STAT 0xAE |
||||||
|
#define CY8CMBR3XXX_LATCHED_PROX_STAT 0xAF |
||||||
|
#define CY8CMBR3XXX_SLIDER1_POSITION 0xB0 |
||||||
|
#define CY8CMBR3XXX_LIFTOFF_SLIDER1_POSITION 0xB1 |
||||||
|
#define CY8CMBR3XXX_SLIDER2_POSITION 0xB2 |
||||||
|
#define CY8CMBR3XXX_LIFTOFF_SLIDER2_POSITION 0xB3 |
||||||
|
#define CY8CMBR3XXX_SYNC_COUNTER0 0xB9 |
||||||
|
#define CY8CMBR3XXX_DIFFERENCE_COUNT_SENSOR0 0xBA |
||||||
|
#define CY8CMBR3XXX_DIFFERENCE_COUNT_SENSOR1 0xBC |
||||||
|
#define CY8CMBR3XXX_DIFFERENCE_COUNT_SENSOR2 0xBE |
||||||
|
#define CY8CMBR3XXX_DIFFERENCE_COUNT_SENSOR3 0xC0 |
||||||
|
#define CY8CMBR3XXX_DIFFERENCE_COUNT_SENSOR4 0xC2 |
||||||
|
#define CY8CMBR3XXX_DIFFERENCE_COUNT_SENSOR5 0xC4 |
||||||
|
#define CY8CMBR3XXX_DIFFERENCE_COUNT_SENSOR6 0xC6 |
||||||
|
#define CY8CMBR3XXX_DIFFERENCE_COUNT_SENSOR7 0xC8 |
||||||
|
#define CY8CMBR3XXX_DIFFERENCE_COUNT_SENSOR8 0xCA |
||||||
|
#define CY8CMBR3XXX_DIFFERENCE_COUNT_SENSOR9 0xCC |
||||||
|
#define CY8CMBR3XXX_DIFFERENCE_COUNT_SENSOR10 0xCE |
||||||
|
#define CY8CMBR3XXX_DIFFERENCE_COUNT_SENSOR11 0xD0 |
||||||
|
#define CY8CMBR3XXX_DIFFERENCE_COUNT_SENSOR12 0xD2 |
||||||
|
#define CY8CMBR3XXX_DIFFERENCE_COUNT_SENSOR13 0xD4 |
||||||
|
#define CY8CMBR3XXX_DIFFERENCE_COUNT_SENSOR14 0xD6 |
||||||
|
#define CY8CMBR3XXX_DIFFERENCE_COUNT_SENSOR15 0xD8 |
||||||
|
#define CY8CMBR3XXX_GPO_DATA 0xDA |
||||||
|
#define CY8CMBR3XXX_SYNC_COUNTER1 0xDB |
||||||
|
#define CY8CMBR3XXX_DEBUG_SENSOR_ID 0xDC |
||||||
|
#define CY8CMBR3XXX_DEBUG_CP 0xDD |
||||||
|
#define CY8CMBR3XXX_DEBUG_DIFFERENCE_COUNT0 0xDE |
||||||
|
#define CY8CMBR3XXX_DEBUG_BASELINE0 0xE0 |
||||||
|
#define CY8CMBR3XXX_DEBUG_RAW_COUNT0 0xE2 |
||||||
|
#define CY8CMBR3XXX_DEBUG_AVG_RAW_COUNT0 0xE4 |
||||||
|
#define CY8CMBR3XXX_SYNC_COUNTER2 0xE7 |
||||||
|
|
||||||
|
#define CY8CMBR3XXX_CTRL_CMD_CALC_CRC 0x02 |
||||||
|
#define CY8CMBR3XXX_CTRL_CMD_RESET 0xFF |
||||||
|
|
||||||
|
/* The controller wakes up from the low-power state on an address match but sends NACK
|
||||||
|
* until it transitions into the Active state. When the device NACKs a transaction, the host is |
||||||
|
* expected to retry the transaction until it receives an ACK. Typically, no more than 3 retries are |
||||||
|
* necessary, depending on time between the interrupt and the first i2c transfer or if |
||||||
|
* no interrupt has caused the initiation of the communication. |
||||||
|
*/ |
||||||
|
#define CY8CMBR3XXX_I2C_RETRIES 5 |
||||||
|
|
||||||
|
struct cy8cmbr3xxx_config { |
||||||
|
struct i2c_dt_spec i2c; |
||||||
|
struct gpio_dt_spec int_gpio; |
||||||
|
struct gpio_dt_spec rst_gpio; |
||||||
|
const uint16_t *input_codes; |
||||||
|
uint8_t input_codes_count; |
||||||
|
const uint16_t *proximity_codes; |
||||||
|
uint8_t proximity_codes_count; |
||||||
|
}; |
||||||
|
|
||||||
|
struct cy8cmbr3xxx_data { |
||||||
|
const struct device *dev; |
||||||
|
struct k_work work; |
||||||
|
struct gpio_callback int_gpio_cb; |
||||||
|
uint16_t prev_button_state; |
||||||
|
uint8_t prev_proximity_state; |
||||||
|
}; |
||||||
|
|
||||||
|
static int cy8cmbr3xxx_i2c_read(const struct device *dev, uint8_t address, void *buf, size_t len) |
||||||
|
{ |
||||||
|
const struct cy8cmbr3xxx_config *config = dev->config; |
||||||
|
int ret; |
||||||
|
|
||||||
|
for (int i = 0; i < CY8CMBR3XXX_I2C_RETRIES; i++) { |
||||||
|
ret = i2c_write_read_dt(&config->i2c, &address, sizeof(address), buf, len); |
||||||
|
if (ret == 0) { |
||||||
|
break; |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
return ret; |
||||||
|
} |
||||||
|
|
||||||
|
static int cy8cmbr3xxx_i2c_write(const struct device *dev, uint8_t address, const void *buf, |
||||||
|
size_t len) |
||||||
|
{ |
||||||
|
const struct cy8cmbr3xxx_config *config = dev->config; |
||||||
|
int ret; |
||||||
|
|
||||||
|
for (int i = 0; i < CY8CMBR3XXX_I2C_RETRIES; i++) { |
||||||
|
ret = i2c_burst_write_dt(&config->i2c, address, buf, len); |
||||||
|
if (ret == 0) { |
||||||
|
break; |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
return ret; |
||||||
|
} |
||||||
|
|
||||||
|
static int cy8cmbr3xxx_wait_for_command_completion(const struct device *dev, k_timeout_t timeout) |
||||||
|
{ |
||||||
|
uint8_t current_command; |
||||||
|
int ret; |
||||||
|
k_timepoint_t end = sys_timepoint_calc(timeout); |
||||||
|
|
||||||
|
do { |
||||||
|
/* Wait for the completion of the command. After a reset command, it can
|
||||||
|
* happen that the device NACKs for some time. |
||||||
|
*/ |
||||||
|
ret = cy8cmbr3xxx_i2c_read(dev, CY8CMBR3XXX_CTRL_CMD, ¤t_command, |
||||||
|
sizeof(uint8_t)); |
||||||
|
|
||||||
|
/* As soon as current_command is 0x00, the command is completed */ |
||||||
|
if (ret == 0 && current_command == 0x00) { |
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
k_msleep(1); |
||||||
|
} while (!sys_timepoint_expired(end)); |
||||||
|
|
||||||
|
LOG_ERR("Wait for command completion timed out"); |
||||||
|
|
||||||
|
return -ETIMEDOUT; |
||||||
|
} |
||||||
|
|
||||||
|
int cy8cmbr3xxx_configure(const struct device *dev, const struct cy8cmbr3xxx_config_data *config) |
||||||
|
{ |
||||||
|
int ret; |
||||||
|
uint8_t read_config[CY8CMBR3XXX_EZ_CLICK_CONFIG_SIZE]; |
||||||
|
uint8_t command; |
||||||
|
|
||||||
|
if (config == NULL) { |
||||||
|
return -EINVAL; |
||||||
|
} |
||||||
|
|
||||||
|
/* Read the complete configuration */ |
||||||
|
ret = cy8cmbr3xxx_i2c_read(dev, CY8CMBR3XXX_SENSOR_EN, read_config, sizeof(read_config)); |
||||||
|
if (ret < 0) { |
||||||
|
LOG_ERR("Failed to read i2c (%d)", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
|
||||||
|
if (memcmp(read_config, config->data, sizeof(config->data)) == 0) { |
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
/* Write the complete configuration of 128 bytes to the CY8CMBR3XXX controller */ |
||||||
|
ret = cy8cmbr3xxx_i2c_write(dev, CY8CMBR3XXX_SENSOR_EN, config->data, sizeof(config->data)); |
||||||
|
if (ret < 0) { |
||||||
|
LOG_ERR("Failed to write i2c (%d)", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
|
||||||
|
/* The device calculates a CRC checksum over the configuration data in this
|
||||||
|
* register map and compares the result with the content of CONFIG_CRC. If the |
||||||
|
* two values match, the device saves the configuration and the CRC checksum to |
||||||
|
* nonvolatile memory. |
||||||
|
*/ |
||||||
|
command = CY8CMBR3XXX_CTRL_CMD_CALC_CRC; |
||||||
|
ret = cy8cmbr3xxx_i2c_write(dev, CY8CMBR3XXX_CTRL_CMD, &command, 1); |
||||||
|
if (ret < 0) { |
||||||
|
LOG_ERR("Failed to write i2c (%d)", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
|
||||||
|
/* 600ms seems to be sufficient */ |
||||||
|
ret = cy8cmbr3xxx_wait_for_command_completion(dev, K_MSEC(600)); |
||||||
|
if (ret < 0) { |
||||||
|
LOG_ERR("Failed to wait for command completion (%d)", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
|
||||||
|
/* The device resets itself */ |
||||||
|
command = CY8CMBR3XXX_CTRL_CMD_RESET; |
||||||
|
ret = cy8cmbr3xxx_i2c_write(dev, CY8CMBR3XXX_CTRL_CMD, &command, 1); |
||||||
|
if (ret < 0) { |
||||||
|
LOG_ERR("Failed to write i2c (%d)", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
|
||||||
|
ret = cy8cmbr3xxx_wait_for_command_completion(dev, K_MSEC(50)); |
||||||
|
if (ret < 0) { |
||||||
|
LOG_ERR("Failed to wait for command completion (%d)", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
static int cy8cmbr3xxx_process(const struct device *dev) |
||||||
|
{ |
||||||
|
const struct cy8cmbr3xxx_config *config = dev->config; |
||||||
|
struct cy8cmbr3xxx_data *data = dev->data; |
||||||
|
int ret; |
||||||
|
uint16_t button_state, single_button_state; |
||||||
|
uint8_t proximity_state, single_proximity_state; |
||||||
|
|
||||||
|
/* Request button status */ |
||||||
|
ret = cy8cmbr3xxx_i2c_read(dev, CY8CMBR3XXX_BUTTON_STAT, &button_state, sizeof(uint16_t)); |
||||||
|
if (ret < 0) { |
||||||
|
LOG_ERR("Failed to read button status (%d)", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
|
||||||
|
for (uint8_t i = 0; i < config->input_codes_count; i++) { |
||||||
|
single_button_state = button_state & BIT(i); |
||||||
|
if (single_button_state != (data->prev_button_state & BIT(i))) { |
||||||
|
input_report_key(dev, config->input_codes[i], single_button_state, true, |
||||||
|
K_FOREVER); |
||||||
|
} |
||||||
|
} |
||||||
|
data->prev_button_state = button_state; |
||||||
|
|
||||||
|
/* Request proximity status */ |
||||||
|
if (config->proximity_codes_count > 0) { |
||||||
|
ret = cy8cmbr3xxx_i2c_read(dev, CY8CMBR3XXX_PROX_STAT, &proximity_state, |
||||||
|
sizeof(uint8_t)); |
||||||
|
if (ret < 0) { |
||||||
|
LOG_ERR("Failed to read proximity status (%d)", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
|
||||||
|
for (uint8_t i = 0; i < config->proximity_codes_count; i++) { |
||||||
|
single_proximity_state = proximity_state & BIT(i); |
||||||
|
if (single_proximity_state != (data->prev_proximity_state & BIT(i))) { |
||||||
|
input_report_key(dev, config->proximity_codes[i], |
||||||
|
single_proximity_state, true, K_FOREVER); |
||||||
|
} |
||||||
|
} |
||||||
|
data->prev_proximity_state = proximity_state; |
||||||
|
} |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
static void cy8cmbr3xxx_work_handler(struct k_work *work) |
||||||
|
{ |
||||||
|
struct cy8cmbr3xxx_data *data = CONTAINER_OF(work, struct cy8cmbr3xxx_data, work); |
||||||
|
|
||||||
|
cy8cmbr3xxx_process(data->dev); |
||||||
|
} |
||||||
|
|
||||||
|
static void cy8cmbr3xxx_isr_handler(const struct device *dev, struct gpio_callback *cb, |
||||||
|
uint32_t pins) |
||||||
|
{ |
||||||
|
struct cy8cmbr3xxx_data *data = CONTAINER_OF(cb, struct cy8cmbr3xxx_data, int_gpio_cb); |
||||||
|
|
||||||
|
k_work_submit(&data->work); |
||||||
|
} |
||||||
|
|
||||||
|
static void cy8cmbr3xxx_reset(const struct device *dev) |
||||||
|
{ |
||||||
|
const struct cy8cmbr3xxx_config *config = dev->config; |
||||||
|
int ret; |
||||||
|
|
||||||
|
if (!gpio_is_ready_dt(&config->rst_gpio)) { |
||||||
|
LOG_ERR("GPIO controller device not ready"); |
||||||
|
return; |
||||||
|
} |
||||||
|
|
||||||
|
ret = gpio_pin_configure_dt(&config->rst_gpio, GPIO_OUTPUT_ACTIVE); |
||||||
|
if (ret < 0) { |
||||||
|
LOG_ERR("Could not configure reset GPIO pin (%d)", ret); |
||||||
|
return; |
||||||
|
} |
||||||
|
|
||||||
|
k_usleep(5); |
||||||
|
|
||||||
|
ret = gpio_pin_set_dt(&config->rst_gpio, 0); |
||||||
|
if (ret < 0) { |
||||||
|
LOG_ERR("Could not set reset GPIO pin (%d)", ret); |
||||||
|
return; |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
static int cy8cmbr3xxx_init(const struct device *dev) |
||||||
|
{ |
||||||
|
const struct cy8cmbr3xxx_config *config = dev->config; |
||||||
|
struct cy8cmbr3xxx_data *data = dev->data; |
||||||
|
int ret; |
||||||
|
|
||||||
|
data->dev = dev; |
||||||
|
|
||||||
|
k_work_init(&data->work, cy8cmbr3xxx_work_handler); |
||||||
|
|
||||||
|
if (!i2c_is_ready_dt(&config->i2c)) { |
||||||
|
LOG_ERR("I2C controller device not ready"); |
||||||
|
return -ENODEV; |
||||||
|
} |
||||||
|
|
||||||
|
cy8cmbr3xxx_reset(dev); |
||||||
|
|
||||||
|
if (!gpio_is_ready_dt(&config->int_gpio)) { |
||||||
|
LOG_ERR("GPIO controller device not ready"); |
||||||
|
return -ENODEV; |
||||||
|
} |
||||||
|
|
||||||
|
ret = gpio_pin_configure_dt(&config->int_gpio, GPIO_INPUT); |
||||||
|
if (ret < 0) { |
||||||
|
LOG_ERR("Could not configure interrupt GPIO pin (%d)", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
|
||||||
|
ret = gpio_pin_interrupt_configure_dt(&config->int_gpio, GPIO_INT_EDGE_TO_ACTIVE); |
||||||
|
if (ret < 0) { |
||||||
|
LOG_ERR("Could not configure GPIO interrupt (%d)", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
|
||||||
|
gpio_init_callback(&data->int_gpio_cb, cy8cmbr3xxx_isr_handler, BIT(config->int_gpio.pin)); |
||||||
|
|
||||||
|
ret = gpio_add_callback(config->int_gpio.port, &data->int_gpio_cb); |
||||||
|
if (ret < 0) { |
||||||
|
LOG_ERR("Could not set gpio callback (%d)", ret); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
#define CY8CMBR3XXX_INIT(inst) \ |
||||||
|
static const uint16_t cy8cmbr3xxx_input_codes_##inst[] = DT_INST_PROP(inst, input_codes); \ |
||||||
|
static const uint16_t cy8cmbr3xxx_proximity_codes_##inst[] = \ |
||||||
|
DT_INST_PROP_OR(inst, proximity_codes, {}); \ |
||||||
|
static const struct cy8cmbr3xxx_config cy8cmbr3xxx_config_##inst = { \ |
||||||
|
.i2c = I2C_DT_SPEC_INST_GET(inst), \ |
||||||
|
.int_gpio = GPIO_DT_SPEC_INST_GET(inst, int_gpios), \ |
||||||
|
.rst_gpio = GPIO_DT_SPEC_INST_GET(inst, rst_gpios), \ |
||||||
|
.input_codes = cy8cmbr3xxx_input_codes_##inst, \ |
||||||
|
.input_codes_count = DT_INST_PROP_LEN(inst, input_codes), \ |
||||||
|
.proximity_codes = cy8cmbr3xxx_proximity_codes_##inst, \ |
||||||
|
.proximity_codes_count = DT_INST_PROP_LEN_OR(inst, proximity_codes, 0), \ |
||||||
|
}; \ |
||||||
|
static struct cy8cmbr3xxx_data cy8cmbr3xxx_data_##inst; \ |
||||||
|
DEVICE_DT_INST_DEFINE(inst, cy8cmbr3xxx_init, NULL, &cy8cmbr3xxx_data_##inst, \ |
||||||
|
&cy8cmbr3xxx_config_##inst, POST_KERNEL, CONFIG_INPUT_INIT_PRIORITY, \ |
||||||
|
NULL); |
||||||
|
|
||||||
|
DT_INST_FOREACH_STATUS_OKAY(CY8CMBR3XXX_INIT) |
||||||
@ -0,0 +1,35 @@ |
|||||||
|
# Copyright (c) 2025 Basalte bv |
||||||
|
# SPDX-License-Identifier: Apache-2.0 |
||||||
|
|
||||||
|
description: | |
||||||
|
Cypress CY8CMBR3002/3102/3106S/3108/3110/3116 capacitive touch sensor |
||||||
|
|
||||||
|
compatible: "cypress,cy8cmbr3xxx" |
||||||
|
|
||||||
|
include: i2c-device.yaml |
||||||
|
|
||||||
|
properties: |
||||||
|
int-gpios: |
||||||
|
type: phandle-array |
||||||
|
required: true |
||||||
|
description: | |
||||||
|
The interrupt pin generates an active low pulse signal on |
||||||
|
any change in the CapSense sensor's status. |
||||||
|
|
||||||
|
rst-gpios: |
||||||
|
type: phandle-array |
||||||
|
required: true |
||||||
|
description: | |
||||||
|
The reset pin resets the capsense controller with an active |
||||||
|
low reset pulse. |
||||||
|
|
||||||
|
input-codes: |
||||||
|
type: array |
||||||
|
required: true |
||||||
|
description: | |
||||||
|
Array of input event key codes (INPUT_KEY_* or INPUT_BTN_*). |
||||||
|
|
||||||
|
proximity-codes: |
||||||
|
type: array |
||||||
|
description: | |
||||||
|
Array of input event key codes (INPUT_KEY_* or INPUT_BTN_*). |
||||||
@ -0,0 +1,37 @@ |
|||||||
|
/*
|
||||||
|
* Copyright (c) 2025 Basalte bv |
||||||
|
* SPDX-License-Identifier: Apache-2.0 |
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef ZEPHYR_INCLUDE_INPUT_CY8CMBR3XXX_H_ |
||||||
|
#define ZEPHYR_INCLUDE_INPUT_CY8CMBR3XXX_H_ |
||||||
|
|
||||||
|
#include <zephyr/types.h> |
||||||
|
|
||||||
|
#define CY8CMBR3XXX_EZ_CLICK_CONFIG_SIZE 128 |
||||||
|
|
||||||
|
#ifdef __cplusplus |
||||||
|
extern "C" { |
||||||
|
#endif /* __cplusplus */ |
||||||
|
|
||||||
|
struct cy8cmbr3xxx_config_data { |
||||||
|
uint8_t data[CY8CMBR3XXX_EZ_CLICK_CONFIG_SIZE]; |
||||||
|
}; |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Configure the CY8CMBR3xxx device with an EZ-Click generated configuration. |
||||||
|
* |
||||||
|
* @param dev Pointer to the input device instance |
||||||
|
* @param config_data Pointer to the configuration data for the device |
||||||
|
* |
||||||
|
* @retval 0 if successful |
||||||
|
* @retval <0 if failed |
||||||
|
*/ |
||||||
|
int cy8cmbr3xxx_configure(const struct device *dev, |
||||||
|
const struct cy8cmbr3xxx_config_data *config_data); |
||||||
|
|
||||||
|
#ifdef __cplusplus |
||||||
|
} |
||||||
|
#endif /* __cplusplus */ |
||||||
|
|
||||||
|
#endif /* ZEPHYR_INCLUDE_INPUT_CY8CMBR3XXX_H_ */ |
||||||
Loading…
Reference in new issue