You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
507 lines
13 KiB
507 lines
13 KiB
/* |
|
* Copyright (c) 2022 BrainCo Inc. |
|
* |
|
* SPDX-License-Identifier: Apache-2.0 |
|
*/ |
|
|
|
#define DT_DRV_COMPAT gd_gd32_adc |
|
|
|
#include <errno.h> |
|
|
|
#include <zephyr/drivers/clock_control.h> |
|
#include <zephyr/drivers/clock_control/gd32.h> |
|
#include <zephyr/drivers/pinctrl.h> |
|
#include <zephyr/drivers/adc.h> |
|
#include <zephyr/drivers/reset.h> |
|
#include <zephyr/devicetree.h> |
|
#include <zephyr/irq.h> |
|
|
|
#include <gd32_adc.h> |
|
#include <gd32_rcu.h> |
|
|
|
#define ADC_CONTEXT_USES_KERNEL_TIMER |
|
#include "adc_context.h" |
|
|
|
#include <zephyr/logging/log.h> |
|
LOG_MODULE_REGISTER(adc_gd32, CONFIG_ADC_LOG_LEVEL); |
|
|
|
/** |
|
* @brief gd32 adc irq have some special cases as below: |
|
* 1. adc number no larger than 3. |
|
* 2. adc0 and adc1 share the same irq number. |
|
* 3. For gd32f4xx, adc2 share the same irq number with adc0 and adc1. |
|
* |
|
* To cover this cases, gd32_adc driver use node-label 'adc0', 'adc1' and |
|
* 'adc2' to handle gd32 adc irq config directly.' |
|
* |
|
* @note Sorry for the restriction, But new added gd32 adc node-label must be 'adc0', |
|
* 'adc1' and 'adc2'. |
|
*/ |
|
#define ADC0_NODE DT_NODELABEL(adc0) |
|
#define ADC1_NODE DT_NODELABEL(adc1) |
|
#define ADC2_NODE DT_NODELABEL(adc2) |
|
|
|
#define ADC0_ENABLE DT_NODE_HAS_STATUS_OKAY(ADC0_NODE) |
|
#define ADC1_ENABLE DT_NODE_HAS_STATUS_OKAY(ADC1_NODE) |
|
#define ADC2_ENABLE DT_NODE_HAS_STATUS_OKAY(ADC2_NODE) |
|
|
|
#ifndef ADC0 |
|
/** |
|
* @brief The name of gd32 ADC HAL are different between single and multi ADC SoCs. |
|
* This adjust the single ADC SoC HAL, so we can call gd32 ADC HAL in a common way. |
|
*/ |
|
#undef ADC_STAT |
|
#undef ADC_CTL0 |
|
#undef ADC_CTL1 |
|
#undef ADC_SAMPT0 |
|
#undef ADC_SAMPT1 |
|
#undef ADC_RSQ2 |
|
#undef ADC_RDATA |
|
|
|
#define ADC_STAT(adc0) REG32((adc0) + 0x00000000U) |
|
#define ADC_CTL0(adc0) REG32((adc0) + 0x00000004U) |
|
#define ADC_CTL1(adc0) REG32((adc0) + 0x00000008U) |
|
#define ADC_SAMPT0(adc0) REG32((adc0) + 0x0000000CU) |
|
#define ADC_SAMPT1(adc0) REG32((adc0) + 0x00000010U) |
|
#define ADC_RSQ2(adc0) REG32((adc0) + 0x00000034U) |
|
#define ADC_RDATA(adc0) REG32((adc0) + 0x0000004CU) |
|
#endif |
|
|
|
#define SPT_WIDTH 3U |
|
#define SAMPT1_SIZE 10U |
|
|
|
#if defined(CONFIG_SOC_SERIES_GD32F4XX) |
|
#define SMP_TIME(x) ADC_SAMPLETIME_##x |
|
|
|
static const uint16_t acq_time_tbl[8] = {3, 15, 28, 56, 84, 112, 144, 480}; |
|
static const uint32_t table_samp_time[] = { |
|
SMP_TIME(3), |
|
SMP_TIME(15), |
|
SMP_TIME(28), |
|
SMP_TIME(56), |
|
SMP_TIME(84), |
|
SMP_TIME(112), |
|
SMP_TIME(144), |
|
SMP_TIME(480) |
|
}; |
|
#elif defined(CONFIG_SOC_SERIES_GD32L23X) |
|
#define SMP_TIME(x) ADC_SAMPLETIME_##x##POINT5 |
|
|
|
static const uint16_t acq_time_tbl[8] = {3, 8, 14, 29, 42, 56, 72, 240}; |
|
static const uint32_t table_samp_time[] = { |
|
SMP_TIME(2), |
|
SMP_TIME(7), |
|
SMP_TIME(13), |
|
SMP_TIME(28), |
|
SMP_TIME(41), |
|
SMP_TIME(55), |
|
SMP_TIME(71), |
|
SMP_TIME(239), |
|
}; |
|
#elif defined(CONFIG_SOC_SERIES_GD32A50X) |
|
#define SMP_TIME(x) ADC_SAMPLETIME_##x##POINT5 |
|
|
|
static const uint16_t acq_time_tbl[8] = {3, 15, 28, 56, 84, 112, 144, 480}; |
|
static const uint32_t table_samp_time[] = { |
|
SMP_TIME(2), |
|
SMP_TIME(14), |
|
SMP_TIME(27), |
|
SMP_TIME(55), |
|
SMP_TIME(83), |
|
SMP_TIME(111), |
|
SMP_TIME(143), |
|
SMP_TIME(479) |
|
}; |
|
#else |
|
#define SMP_TIME(x) ADC_SAMPLETIME_##x##POINT5 |
|
|
|
static const uint16_t acq_time_tbl[8] = {2, 8, 14, 29, 42, 56, 72, 240}; |
|
static const uint32_t table_samp_time[] = { |
|
SMP_TIME(1), |
|
SMP_TIME(7), |
|
SMP_TIME(13), |
|
SMP_TIME(28), |
|
SMP_TIME(41), |
|
SMP_TIME(55), |
|
SMP_TIME(71), |
|
SMP_TIME(239) |
|
}; |
|
#endif |
|
|
|
struct adc_gd32_config { |
|
uint32_t reg; |
|
#ifdef CONFIG_SOC_SERIES_GD32F3X0 |
|
uint32_t rcu_clock_source; |
|
#endif |
|
uint16_t clkid; |
|
struct reset_dt_spec reset; |
|
uint8_t channels; |
|
const struct pinctrl_dev_config *pcfg; |
|
uint8_t irq_num; |
|
void (*irq_config_func)(void); |
|
}; |
|
|
|
struct adc_gd32_data { |
|
struct adc_context ctx; |
|
const struct device *dev; |
|
uint16_t *buffer; |
|
uint16_t *repeat_buffer; |
|
}; |
|
|
|
static void adc_gd32_isr(const struct device *dev) |
|
{ |
|
struct adc_gd32_data *data = dev->data; |
|
const struct adc_gd32_config *cfg = dev->config; |
|
|
|
if (ADC_STAT(cfg->reg) & ADC_STAT_EOC) { |
|
*data->buffer++ = ADC_RDATA(cfg->reg); |
|
|
|
/* Disable EOC interrupt. */ |
|
ADC_CTL0(cfg->reg) &= ~ADC_CTL0_EOCIE; |
|
/* Clear EOC bit. */ |
|
ADC_STAT(cfg->reg) &= ~ADC_STAT_EOC; |
|
|
|
adc_context_on_sampling_done(&data->ctx, dev); |
|
} |
|
} |
|
|
|
static void adc_context_start_sampling(struct adc_context *ctx) |
|
{ |
|
struct adc_gd32_data *data = CONTAINER_OF(ctx, struct adc_gd32_data, ctx); |
|
const struct device *dev = data->dev; |
|
const struct adc_gd32_config *cfg = dev->config; |
|
|
|
data->repeat_buffer = data->buffer; |
|
|
|
/* Enable EOC interrupt */ |
|
ADC_CTL0(cfg->reg) |= ADC_CTL0_EOCIE; |
|
|
|
/* Set ADC software conversion trigger. */ |
|
ADC_CTL1(cfg->reg) |= ADC_CTL1_SWRCST; |
|
} |
|
|
|
static void adc_context_update_buffer_pointer(struct adc_context *ctx, |
|
bool repeat_sampling) |
|
{ |
|
struct adc_gd32_data *data = CONTAINER_OF(ctx, struct adc_gd32_data, ctx); |
|
|
|
if (repeat_sampling) { |
|
data->buffer = data->repeat_buffer; |
|
} |
|
} |
|
|
|
static inline void adc_gd32_calibration(const struct adc_gd32_config *cfg) |
|
{ |
|
ADC_CTL1(cfg->reg) |= ADC_CTL1_RSTCLB; |
|
/* Wait for calibration registers initialized. */ |
|
while (ADC_CTL1(cfg->reg) & ADC_CTL1_RSTCLB) { |
|
} |
|
|
|
ADC_CTL1(cfg->reg) |= ADC_CTL1_CLB; |
|
/* Wait for calibration complete. */ |
|
while (ADC_CTL1(cfg->reg) & ADC_CTL1_CLB) { |
|
} |
|
} |
|
|
|
static int adc_gd32_configure_sampt(const struct adc_gd32_config *cfg, |
|
uint8_t channel, uint16_t acq_time) |
|
{ |
|
uint8_t index = 0, offset; |
|
|
|
if (acq_time != ADC_ACQ_TIME_DEFAULT) { |
|
/* Acquisition time unit is adc clock cycle. */ |
|
if (ADC_ACQ_TIME_UNIT(acq_time) != ADC_ACQ_TIME_TICKS) { |
|
return -EINVAL; |
|
} |
|
|
|
for ( ; index < ARRAY_SIZE(acq_time_tbl); index++) { |
|
if (ADC_ACQ_TIME_VALUE(acq_time) <= acq_time_tbl[index]) { |
|
break; |
|
} |
|
} |
|
|
|
if (ADC_ACQ_TIME_VALUE(acq_time) != acq_time_tbl[index]) { |
|
return -ENOTSUP; |
|
} |
|
} |
|
|
|
if (channel < SAMPT1_SIZE) { |
|
offset = SPT_WIDTH * channel; |
|
ADC_SAMPT1(cfg->reg) &= ~(ADC_SAMPTX_SPTN << offset); |
|
ADC_SAMPT1(cfg->reg) |= table_samp_time[index] << offset; |
|
} else { |
|
offset = SPT_WIDTH * (channel - SAMPT1_SIZE); |
|
ADC_SAMPT0(cfg->reg) &= ~(ADC_SAMPTX_SPTN << offset); |
|
ADC_SAMPT0(cfg->reg) |= table_samp_time[index] << offset; |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
static int adc_gd32_channel_setup(const struct device *dev, |
|
const struct adc_channel_cfg *chan_cfg) |
|
{ |
|
const struct adc_gd32_config *cfg = dev->config; |
|
|
|
if (chan_cfg->gain != ADC_GAIN_1) { |
|
LOG_ERR("Gain is not valid"); |
|
return -ENOTSUP; |
|
} |
|
|
|
if (chan_cfg->reference != ADC_REF_INTERNAL) { |
|
LOG_ERR("Reference is not valid"); |
|
return -ENOTSUP; |
|
} |
|
|
|
if (chan_cfg->differential) { |
|
LOG_ERR("Differential sampling not supported"); |
|
return -ENOTSUP; |
|
} |
|
|
|
if (chan_cfg->channel_id >= cfg->channels) { |
|
LOG_ERR("Invalid channel (%u)", chan_cfg->channel_id); |
|
return -EINVAL; |
|
} |
|
|
|
return adc_gd32_configure_sampt(cfg, chan_cfg->channel_id, |
|
chan_cfg->acquisition_time); |
|
} |
|
|
|
static int adc_gd32_start_read(const struct device *dev, |
|
const struct adc_sequence *sequence) |
|
{ |
|
struct adc_gd32_data *data = dev->data; |
|
const struct adc_gd32_config *cfg = dev->config; |
|
uint8_t resolution_id; |
|
uint32_t index; |
|
|
|
index = find_lsb_set(sequence->channels) - 1; |
|
if (sequence->channels > BIT(index)) { |
|
LOG_ERR("Only single channel supported"); |
|
return -ENOTSUP; |
|
} |
|
|
|
switch (sequence->resolution) { |
|
case 12U: |
|
resolution_id = 0U; |
|
break; |
|
case 10U: |
|
resolution_id = 1U; |
|
break; |
|
case 8U: |
|
resolution_id = 2U; |
|
break; |
|
case 6U: |
|
resolution_id = 3U; |
|
break; |
|
default: |
|
return -EINVAL; |
|
} |
|
|
|
#if defined(CONFIG_SOC_SERIES_GD32F4XX) || \ |
|
defined(CONFIG_SOC_SERIES_GD32F3X0) || \ |
|
defined(CONFIG_SOC_SERIES_GD32L23X) |
|
ADC_CTL0(cfg->reg) &= ~ADC_CTL0_DRES; |
|
ADC_CTL0(cfg->reg) |= CTL0_DRES(resolution_id); |
|
#elif defined(CONFIG_SOC_SERIES_GD32F403) || \ |
|
defined(CONFIG_SOC_SERIES_GD32A50X) |
|
ADC_OVSAMPCTL(cfg->reg) &= ~ADC_OVSAMPCTL_DRES; |
|
ADC_OVSAMPCTL(cfg->reg) |= OVSAMPCTL_DRES(resolution_id); |
|
#elif defined(CONFIG_SOC_SERIES_GD32VF103) |
|
ADC_OVSCR(cfg->reg) &= ~ADC_OVSCR_DRES; |
|
ADC_OVSCR(cfg->reg) |= OVSCR_DRES(resolution_id); |
|
#endif |
|
|
|
if (sequence->calibrate) { |
|
adc_gd32_calibration(cfg); |
|
} |
|
|
|
/* Signle conversion mode with regular group. */ |
|
ADC_RSQ2(cfg->reg) &= ~ADC_RSQX_RSQN; |
|
ADC_RSQ2(cfg->reg) = index; |
|
|
|
data->buffer = sequence->buffer; |
|
|
|
adc_context_start_read(&data->ctx, sequence); |
|
|
|
return adc_context_wait_for_completion(&data->ctx); |
|
} |
|
|
|
static int adc_gd32_read(const struct device *dev, |
|
const struct adc_sequence *sequence) |
|
{ |
|
struct adc_gd32_data *data = dev->data; |
|
int error; |
|
|
|
adc_context_lock(&data->ctx, false, NULL); |
|
error = adc_gd32_start_read(dev, sequence); |
|
adc_context_release(&data->ctx, error); |
|
|
|
return error; |
|
} |
|
|
|
#ifdef CONFIG_ADC_ASYNC |
|
static int adc_gd32_read_async(const struct device *dev, |
|
const struct adc_sequence *sequence, |
|
struct k_poll_signal *async) |
|
{ |
|
struct adc_gd32_data *data = dev->data; |
|
int error; |
|
|
|
adc_context_lock(&data->ctx, true, async); |
|
error = adc_gd32_start_read(dev, sequence); |
|
adc_context_release(&data->ctx, error); |
|
|
|
return error; |
|
} |
|
#endif /* CONFIG_ADC_ASYNC */ |
|
|
|
static DEVICE_API(adc, adc_gd32_driver_api) = { |
|
.channel_setup = adc_gd32_channel_setup, |
|
.read = adc_gd32_read, |
|
#ifdef CONFIG_ADC_ASYNC |
|
.read_async = adc_gd32_read_async, |
|
#endif /* CONFIG_ADC_ASYNC */ |
|
}; |
|
|
|
static int adc_gd32_init(const struct device *dev) |
|
{ |
|
struct adc_gd32_data *data = dev->data; |
|
const struct adc_gd32_config *cfg = dev->config; |
|
int ret; |
|
|
|
data->dev = dev; |
|
|
|
ret = pinctrl_apply_state(cfg->pcfg, PINCTRL_STATE_DEFAULT); |
|
if (ret < 0) { |
|
return ret; |
|
} |
|
|
|
#ifdef CONFIG_SOC_SERIES_GD32F3X0 |
|
/* Select adc clock source and its prescaler. */ |
|
rcu_adc_clock_config(cfg->rcu_clock_source); |
|
#endif |
|
|
|
(void)clock_control_on(GD32_CLOCK_CONTROLLER, |
|
(clock_control_subsys_t)&cfg->clkid); |
|
|
|
(void)reset_line_toggle_dt(&cfg->reset); |
|
|
|
#if defined(CONFIG_SOC_SERIES_GD32F403) || \ |
|
defined(CONFIG_SOC_SERIES_GD32VF103) || \ |
|
defined(CONFIG_SOC_SERIES_GD32F3X0) || \ |
|
defined(CONFIG_SOC_SERIES_GD32L23X) |
|
/* Set SWRCST as the regular channel external trigger. */ |
|
ADC_CTL1(cfg->reg) &= ~ADC_CTL1_ETSRC; |
|
ADC_CTL1(cfg->reg) |= CTL1_ETSRC(7); |
|
|
|
/* Enable external trigger for regular channel. */ |
|
ADC_CTL1(cfg->reg) |= ADC_CTL1_ETERC; |
|
#endif |
|
|
|
#ifdef CONFIG_SOC_SERIES_GD32A50X |
|
ADC_CTL1(cfg->reg) |= ADC_CTL1_ETSRC; |
|
ADC_CTL1(cfg->reg) |= ADC_CTL1_ETERC; |
|
#endif |
|
|
|
/* Enable ADC */ |
|
ADC_CTL1(cfg->reg) |= ADC_CTL1_ADCON; |
|
|
|
adc_gd32_calibration(cfg); |
|
|
|
cfg->irq_config_func(); |
|
|
|
adc_context_unlock_unconditionally(&data->ctx); |
|
|
|
return 0; |
|
} |
|
|
|
#define HANDLE_SHARED_IRQ(n, active_irq) \ |
|
static const struct device *const dev_##n = DEVICE_DT_INST_GET(n); \ |
|
const struct adc_gd32_config *cfg_##n = dev_##n->config; \ |
|
\ |
|
if ((cfg_##n->irq_num == active_irq) && \ |
|
(ADC_CTL0(cfg_##n->reg) & ADC_CTL0_EOCIE)) { \ |
|
adc_gd32_isr(dev_##n); \ |
|
} |
|
|
|
static void adc_gd32_global_irq_handler(const struct device *dev) |
|
{ |
|
const struct adc_gd32_config *cfg = dev->config; |
|
|
|
LOG_DBG("global irq handler: %u", cfg->irq_num); |
|
|
|
DT_INST_FOREACH_STATUS_OKAY_VARGS(HANDLE_SHARED_IRQ, (cfg->irq_num)); |
|
} |
|
|
|
static void adc_gd32_global_irq_cfg(void) |
|
{ |
|
static bool global_irq_init = true; |
|
|
|
if (!global_irq_init) { |
|
return; |
|
} |
|
|
|
global_irq_init = false; |
|
|
|
#if ADC0_ENABLE |
|
/* Shared irq config default to adc0. */ |
|
IRQ_CONNECT(DT_IRQN(ADC0_NODE), |
|
DT_IRQ(ADC0_NODE, priority), |
|
adc_gd32_global_irq_handler, |
|
DEVICE_DT_GET(ADC0_NODE), |
|
0); |
|
irq_enable(DT_IRQN(ADC0_NODE)); |
|
#elif ADC1_ENABLE |
|
IRQ_CONNECT(DT_IRQN(ADC1_NODE), |
|
DT_IRQ(ADC1_NODE, priority), |
|
adc_gd32_global_irq_handler, |
|
DEVICE_DT_GET(ADC1_NODE), |
|
0); |
|
irq_enable(DT_IRQN(ADC1_NODE)); |
|
#endif |
|
|
|
#if (ADC0_ENABLE || ADC1_ENABLE) && \ |
|
defined(CONFIG_SOC_SERIES_GD32F4XX) |
|
/* gd32f4xx adc2 share the same irq number with adc0 and adc1. */ |
|
#elif ADC2_ENABLE |
|
IRQ_CONNECT(DT_IRQN(ADC2_NODE), |
|
DT_IRQ(ADC2_NODE, priority), |
|
adc_gd32_global_irq_handler, |
|
DEVICE_DT_GET(ADC2_NODE), |
|
0); |
|
irq_enable(DT_IRQN(ADC2_NODE)); |
|
#endif |
|
} |
|
|
|
#ifdef CONFIG_SOC_SERIES_GD32F3X0 |
|
#define ADC_CLOCK_SOURCE(n) \ |
|
.rcu_clock_source = DT_INST_PROP(n, rcu_clock_source) |
|
#else |
|
#define ADC_CLOCK_SOURCE(n) |
|
#endif |
|
|
|
#define ADC_GD32_INIT(n) \ |
|
PINCTRL_DT_INST_DEFINE(n); \ |
|
static struct adc_gd32_data adc_gd32_data_##n = { \ |
|
ADC_CONTEXT_INIT_TIMER(adc_gd32_data_##n, ctx), \ |
|
ADC_CONTEXT_INIT_LOCK(adc_gd32_data_##n, ctx), \ |
|
ADC_CONTEXT_INIT_SYNC(adc_gd32_data_##n, ctx), \ |
|
}; \ |
|
const static struct adc_gd32_config adc_gd32_config_##n = { \ |
|
.reg = DT_INST_REG_ADDR(n), \ |
|
.clkid = DT_INST_CLOCKS_CELL(n, id), \ |
|
.reset = RESET_DT_SPEC_INST_GET(n), \ |
|
.channels = DT_INST_PROP(n, channels), \ |
|
.pcfg = PINCTRL_DT_INST_DEV_CONFIG_GET(n), \ |
|
.irq_num = DT_INST_IRQN(n), \ |
|
.irq_config_func = adc_gd32_global_irq_cfg, \ |
|
ADC_CLOCK_SOURCE(n) \ |
|
}; \ |
|
DEVICE_DT_INST_DEFINE(n, \ |
|
&adc_gd32_init, NULL, \ |
|
&adc_gd32_data_##n, &adc_gd32_config_##n, \ |
|
POST_KERNEL, CONFIG_ADC_INIT_PRIORITY, \ |
|
&adc_gd32_driver_api); \ |
|
|
|
DT_INST_FOREACH_STATUS_OKAY(ADC_GD32_INIT)
|
|
|