Primary Git Repository for the Zephyr Project. Zephyr is a new generation, scalable, optimized, secure RTOS for multiple hardware architectures.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

59 lines
1.9 KiB

.. zephyr:board:: pico2_spe
Overview
********
The Pico2-SPE is a small, low-cost, versatile boards from
KWS Computersysteme Gmbh. They are equipped with an RP2350a SoC, an on-board LED,
a USB connector, an SWD interface. The Pico2-SPE additionally contains an
Microchip LAN8651 10Base-T1S module. The USB bootloader allows the
ability to flash without any adapter, in a drag-and-drop manner.
It is also possible to flash and debug the boards with their SWD interface,
using an external adapter.
Hardware
********
- Dual Cortex-M33 or Hazard3 processors at up to 150MHz
- 520KB of SRAM, and 4MB of on-board flash memory
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26 multi-function GPIO pins including 3 that can be used for ADC
- 1 SPI, 2 I2C, 2 UART, 3 12-bit 500ksps Analogue to Digital - Converter (ADC), 24 controllable PWM channels
- 2 Timer with 4 alarms, 1 AON Timer
- Temperature sensor
- Microchip LAN8651 10Base-T1S
- 3 Programmable IO (PIO) blocks, 12 state machines total for custom peripheral support
- Flexible, user-programmable high-speed IO
- Can emulate interfaces such as SD Card and VGA
Supported Features
==================
.. zephyr:board-supported-hw::
Connections and IOs
===================
The default pin mapping is unchanged from the Pico-SPE.
Programming and Debugging
*************************
.. zephyr:board-supported-runners::
As with the Pico-SPE, the SWD interface can be used to program and debug the
device, e.g. using OpenOCD with the `Raspberry Pi Debug Probe <https://www.raspberrypi.com/documentation/microcontrollers/debug-probe.html>`_ .
References
**********
.. _Getting Started with Pico-SPE-Series:
https://kws-computer.de/go/pico-spe-getting-started
.. _Pico2-SPE Documentation:
https://kws-computer.de/go/pico2-spe-datasheet
.. target-notes::