You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
959 lines
24 KiB
959 lines
24 KiB
/* |
|
* Copyright (c) 2018 STMicroelectronics |
|
* |
|
* SPDX-License-Identifier: Apache-2.0 |
|
*/ |
|
|
|
#define DT_DRV_COMPAT st_stm32_i2s |
|
|
|
#include <string.h> |
|
#include <drivers/dma.h> |
|
#include <drivers/i2s.h> |
|
#include <dt-bindings/dma/stm32_dma.h> |
|
#include <soc.h> |
|
#include <stm32_ll_rcc.h> |
|
#include <stm32_ll_spi.h> |
|
#include <drivers/clock_control/stm32_clock_control.h> |
|
#include <drivers/clock_control.h> |
|
#include <pinmux/stm32/pinmux_stm32.h> |
|
|
|
#include "i2s_ll_stm32.h" |
|
#include <logging/log.h> |
|
LOG_MODULE_REGISTER(i2s_ll_stm32); |
|
|
|
/* FIXME change to |
|
* #if __DCACHE_PRESENT == 1 |
|
* when cache support is added |
|
*/ |
|
#if 0 |
|
#define DCACHE_INVALIDATE(addr, size) \ |
|
SCB_InvalidateDCache_by_Addr((uint32_t *)addr, size) |
|
#define DCACHE_CLEAN(addr, size) \ |
|
SCB_CleanDCache_by_Addr((uint32_t *)addr, size) |
|
#else |
|
#define DCACHE_INVALIDATE(addr, size) {; } |
|
#define DCACHE_CLEAN(addr, size) {; } |
|
#endif |
|
|
|
#define MODULO_INC(val, max) { val = (++val < max) ? val : 0; } |
|
|
|
static unsigned int div_round_closest(uint32_t dividend, uint32_t divisor) |
|
{ |
|
return (dividend + (divisor / 2U)) / divisor; |
|
} |
|
|
|
/* |
|
* Get data from the queue |
|
*/ |
|
static int queue_get(struct ring_buf *rb, void **mem_block, size_t *size) |
|
{ |
|
unsigned int key; |
|
|
|
key = irq_lock(); |
|
|
|
if (rb->tail == rb->head) { |
|
/* Ring buffer is empty */ |
|
irq_unlock(key); |
|
return -ENOMEM; |
|
} |
|
|
|
*mem_block = rb->buf[rb->tail].mem_block; |
|
*size = rb->buf[rb->tail].size; |
|
MODULO_INC(rb->tail, rb->len); |
|
|
|
irq_unlock(key); |
|
|
|
return 0; |
|
} |
|
|
|
/* |
|
* Put data in the queue |
|
*/ |
|
static int queue_put(struct ring_buf *rb, void *mem_block, size_t size) |
|
{ |
|
uint16_t head_next; |
|
unsigned int key; |
|
|
|
key = irq_lock(); |
|
|
|
head_next = rb->head; |
|
MODULO_INC(head_next, rb->len); |
|
|
|
if (head_next == rb->tail) { |
|
/* Ring buffer is full */ |
|
irq_unlock(key); |
|
return -ENOMEM; |
|
} |
|
|
|
rb->buf[rb->head].mem_block = mem_block; |
|
rb->buf[rb->head].size = size; |
|
rb->head = head_next; |
|
|
|
irq_unlock(key); |
|
|
|
return 0; |
|
} |
|
|
|
static int i2s_stm32_enable_clock(const struct device *dev) |
|
{ |
|
const struct i2s_stm32_cfg *cfg = DEV_CFG(dev); |
|
const struct device *clk; |
|
int ret; |
|
|
|
clk = device_get_binding(STM32_CLOCK_CONTROL_NAME); |
|
__ASSERT_NO_MSG(clk); |
|
|
|
ret = clock_control_on(clk, (clock_control_subsys_t *) &cfg->pclken); |
|
if (ret != 0) { |
|
LOG_ERR("Could not enable I2S clock"); |
|
return -EIO; |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
#ifdef CONFIG_I2S_STM32_USE_PLLI2S_ENABLE |
|
#define PLLI2S_MAX_MS_TIME 1 /* PLLI2S lock time is 300us max */ |
|
static uint16_t plli2s_ms_count; |
|
|
|
#define z_pllr(v) LL_RCC_PLLI2SR_DIV_ ## v |
|
#define pllr(v) z_pllr(v) |
|
#endif |
|
|
|
static int i2s_stm32_set_clock(const struct device *dev, |
|
uint32_t bit_clk_freq) |
|
{ |
|
const struct i2s_stm32_cfg *cfg = DEV_CFG(dev); |
|
uint32_t pll_src = LL_RCC_PLL_GetMainSource(); |
|
int freq_in; |
|
uint8_t i2s_div, i2s_odd; |
|
|
|
freq_in = (pll_src == LL_RCC_PLLSOURCE_HSI) ? |
|
HSI_VALUE : CONFIG_CLOCK_STM32_HSE_CLOCK; |
|
|
|
#ifdef CONFIG_I2S_STM32_USE_PLLI2S_ENABLE |
|
/* Set PLLI2S */ |
|
LL_RCC_PLLI2S_Disable(); |
|
LL_RCC_PLLI2S_ConfigDomain_I2S(pll_src, |
|
CONFIG_I2S_STM32_PLLI2S_PLLM, |
|
CONFIG_I2S_STM32_PLLI2S_PLLN, |
|
pllr(CONFIG_I2S_STM32_PLLI2S_PLLR)); |
|
LL_RCC_PLLI2S_Enable(); |
|
|
|
/* wait until PLLI2S gets locked */ |
|
while (!LL_RCC_PLLI2S_IsReady()) { |
|
if (plli2s_ms_count++ > PLLI2S_MAX_MS_TIME) { |
|
return -EIO; |
|
} |
|
|
|
/* wait 1 ms */ |
|
k_sleep(K_MSEC(1)); |
|
} |
|
LOG_DBG("PLLI2S is locked"); |
|
|
|
/* Adjust freq_in according to PLLM, PLLN, PLLR */ |
|
float freq_tmp; |
|
|
|
freq_tmp = freq_in / CONFIG_I2S_STM32_PLLI2S_PLLM; |
|
freq_tmp *= CONFIG_I2S_STM32_PLLI2S_PLLN; |
|
freq_tmp /= CONFIG_I2S_STM32_PLLI2S_PLLR; |
|
freq_in = (int) freq_tmp; |
|
#endif /* CONFIG_I2S_STM32_USE_PLLI2S_ENABLE */ |
|
|
|
/* Select clock source */ |
|
LL_RCC_SetI2SClockSource(cfg->i2s_clk_sel); |
|
|
|
/* |
|
* The ratio between input clock (I2SxClk) and output |
|
* clock on the pad (I2S_CK) is obtained using the |
|
* following formula: |
|
* (i2s_div * 2) + i2s_odd |
|
*/ |
|
i2s_div = div_round_closest(freq_in, bit_clk_freq); |
|
i2s_odd = (i2s_div & 0x1) ? 1 : 0; |
|
i2s_div >>= 1; |
|
|
|
LOG_DBG("i2s_div: %d - i2s_odd: %d", i2s_div, i2s_odd); |
|
|
|
LL_I2S_SetPrescalerLinear(cfg->i2s, i2s_div); |
|
LL_I2S_SetPrescalerParity(cfg->i2s, i2s_odd); |
|
|
|
return 0; |
|
} |
|
|
|
static int i2s_stm32_configure(const struct device *dev, enum i2s_dir dir, |
|
struct i2s_config *i2s_cfg) |
|
{ |
|
const struct i2s_stm32_cfg *const cfg = DEV_CFG(dev); |
|
struct i2s_stm32_data *const dev_data = DEV_DATA(dev); |
|
struct stream *stream; |
|
uint32_t bit_clk_freq; |
|
int ret; |
|
|
|
if (dir == I2S_DIR_RX) { |
|
stream = &dev_data->rx; |
|
} else if (dir == I2S_DIR_TX) { |
|
stream = &dev_data->tx; |
|
} else { |
|
LOG_ERR("Either RX or TX direction must be selected"); |
|
return -EINVAL; |
|
} |
|
|
|
if (stream->state != I2S_STATE_NOT_READY && |
|
stream->state != I2S_STATE_READY) { |
|
LOG_ERR("invalid state"); |
|
return -EINVAL; |
|
} |
|
|
|
stream->master = true; |
|
if (i2s_cfg->options & I2S_OPT_FRAME_CLK_SLAVE || |
|
i2s_cfg->options & I2S_OPT_BIT_CLK_SLAVE) { |
|
stream->master = false; |
|
} |
|
|
|
if (i2s_cfg->frame_clk_freq == 0U) { |
|
stream->queue_drop(stream); |
|
memset(&stream->cfg, 0, sizeof(struct i2s_config)); |
|
stream->state = I2S_STATE_NOT_READY; |
|
return 0; |
|
} |
|
|
|
memcpy(&stream->cfg, i2s_cfg, sizeof(struct i2s_config)); |
|
|
|
/* set I2S bitclock */ |
|
bit_clk_freq = i2s_cfg->frame_clk_freq * |
|
i2s_cfg->word_size * i2s_cfg->channels; |
|
|
|
ret = i2s_stm32_set_clock(dev, bit_clk_freq); |
|
if (ret < 0) { |
|
return ret; |
|
} |
|
|
|
/* set I2S Master Clock */ |
|
if (stream->master) { |
|
LL_I2S_EnableMasterClock(cfg->i2s); |
|
} else { |
|
LL_I2S_DisableMasterClock(cfg->i2s); |
|
} |
|
|
|
/* set I2S Data Format */ |
|
if (i2s_cfg->word_size == 16U) { |
|
LL_I2S_SetDataFormat(cfg->i2s, LL_I2S_DATAFORMAT_16B); |
|
} else if (i2s_cfg->word_size == 24U) { |
|
LL_I2S_SetDataFormat(cfg->i2s, LL_I2S_DATAFORMAT_24B); |
|
} else if (i2s_cfg->word_size == 32U) { |
|
LL_I2S_SetDataFormat(cfg->i2s, LL_I2S_DATAFORMAT_32B); |
|
} else { |
|
LOG_ERR("invalid word size"); |
|
return -EINVAL; |
|
} |
|
|
|
/* set I2S Standard */ |
|
switch (i2s_cfg->format & I2S_FMT_DATA_FORMAT_MASK) { |
|
case I2S_FMT_DATA_FORMAT_I2S: |
|
LL_I2S_SetStandard(cfg->i2s, LL_I2S_STANDARD_PHILIPS); |
|
break; |
|
|
|
case I2S_FMT_DATA_FORMAT_PCM_SHORT: |
|
LL_I2S_SetStandard(cfg->i2s, LL_I2S_STANDARD_PCM_SHORT); |
|
break; |
|
|
|
case I2S_FMT_DATA_FORMAT_PCM_LONG: |
|
LL_I2S_SetStandard(cfg->i2s, LL_I2S_STANDARD_PCM_LONG); |
|
break; |
|
|
|
case I2S_FMT_DATA_FORMAT_LEFT_JUSTIFIED: |
|
LL_I2S_SetStandard(cfg->i2s, LL_I2S_STANDARD_MSB); |
|
break; |
|
|
|
case I2S_FMT_DATA_FORMAT_RIGHT_JUSTIFIED: |
|
LL_I2S_SetStandard(cfg->i2s, LL_I2S_STANDARD_LSB); |
|
break; |
|
|
|
default: |
|
LOG_ERR("Unsupported I2S data format"); |
|
return -EINVAL; |
|
} |
|
|
|
/* set I2S clock polarity */ |
|
if ((i2s_cfg->format & I2S_FMT_CLK_FORMAT_MASK) == I2S_FMT_BIT_CLK_INV) |
|
LL_I2S_SetClockPolarity(cfg->i2s, LL_I2S_POLARITY_HIGH); |
|
else |
|
LL_I2S_SetClockPolarity(cfg->i2s, LL_I2S_POLARITY_LOW); |
|
|
|
stream->state = I2S_STATE_READY; |
|
return 0; |
|
} |
|
|
|
static int i2s_stm32_trigger(const struct device *dev, enum i2s_dir dir, |
|
enum i2s_trigger_cmd cmd) |
|
{ |
|
struct i2s_stm32_data *const dev_data = DEV_DATA(dev); |
|
struct stream *stream; |
|
unsigned int key; |
|
int ret; |
|
|
|
if (dir == I2S_DIR_RX) { |
|
stream = &dev_data->rx; |
|
} else if (dir == I2S_DIR_TX) { |
|
stream = &dev_data->tx; |
|
} else { |
|
LOG_ERR("Either RX or TX direction must be selected"); |
|
return -EINVAL; |
|
} |
|
|
|
switch (cmd) { |
|
case I2S_TRIGGER_START: |
|
if (stream->state != I2S_STATE_READY) { |
|
LOG_ERR("START trigger: invalid state %d", |
|
stream->state); |
|
return -EIO; |
|
} |
|
|
|
__ASSERT_NO_MSG(stream->mem_block == NULL); |
|
|
|
ret = stream->stream_start(stream, dev); |
|
if (ret < 0) { |
|
LOG_ERR("START trigger failed %d", ret); |
|
return ret; |
|
} |
|
|
|
stream->state = I2S_STATE_RUNNING; |
|
stream->last_block = false; |
|
break; |
|
|
|
case I2S_TRIGGER_STOP: |
|
key = irq_lock(); |
|
if (stream->state != I2S_STATE_RUNNING) { |
|
irq_unlock(key); |
|
LOG_ERR("STOP trigger: invalid state"); |
|
return -EIO; |
|
} |
|
irq_unlock(key); |
|
stream->stream_disable(stream, dev); |
|
stream->queue_drop(stream); |
|
stream->state = I2S_STATE_READY; |
|
stream->last_block = true; |
|
break; |
|
|
|
case I2S_TRIGGER_DRAIN: |
|
key = irq_lock(); |
|
if (stream->state != I2S_STATE_RUNNING) { |
|
irq_unlock(key); |
|
LOG_ERR("DRAIN trigger: invalid state"); |
|
return -EIO; |
|
} |
|
stream->stream_disable(stream, dev); |
|
stream->queue_drop(stream); |
|
stream->state = I2S_STATE_READY; |
|
irq_unlock(key); |
|
break; |
|
|
|
case I2S_TRIGGER_DROP: |
|
if (stream->state == I2S_STATE_NOT_READY) { |
|
LOG_ERR("DROP trigger: invalid state"); |
|
return -EIO; |
|
} |
|
stream->stream_disable(stream, dev); |
|
stream->queue_drop(stream); |
|
stream->state = I2S_STATE_READY; |
|
break; |
|
|
|
case I2S_TRIGGER_PREPARE: |
|
if (stream->state != I2S_STATE_ERROR) { |
|
LOG_ERR("PREPARE trigger: invalid state"); |
|
return -EIO; |
|
} |
|
stream->state = I2S_STATE_READY; |
|
stream->queue_drop(stream); |
|
break; |
|
|
|
default: |
|
LOG_ERR("Unsupported trigger command"); |
|
return -EINVAL; |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
static int i2s_stm32_read(const struct device *dev, void **mem_block, |
|
size_t *size) |
|
{ |
|
struct i2s_stm32_data *const dev_data = DEV_DATA(dev); |
|
int ret; |
|
|
|
if (dev_data->rx.state == I2S_STATE_NOT_READY) { |
|
LOG_DBG("invalid state"); |
|
return -EIO; |
|
} |
|
|
|
if (dev_data->rx.state != I2S_STATE_ERROR) { |
|
ret = k_sem_take(&dev_data->rx.sem, |
|
SYS_TIMEOUT_MS(dev_data->rx.cfg.timeout)); |
|
if (ret < 0) { |
|
return ret; |
|
} |
|
} |
|
|
|
/* Get data from the beginning of RX queue */ |
|
ret = queue_get(&dev_data->rx.mem_block_queue, mem_block, size); |
|
if (ret < 0) { |
|
return -EIO; |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
static int i2s_stm32_write(const struct device *dev, void *mem_block, |
|
size_t size) |
|
{ |
|
struct i2s_stm32_data *const dev_data = DEV_DATA(dev); |
|
int ret; |
|
|
|
if (dev_data->tx.state != I2S_STATE_RUNNING && |
|
dev_data->tx.state != I2S_STATE_READY) { |
|
LOG_DBG("invalid state"); |
|
return -EIO; |
|
} |
|
|
|
ret = k_sem_take(&dev_data->tx.sem, |
|
SYS_TIMEOUT_MS(dev_data->tx.cfg.timeout)); |
|
if (ret < 0) { |
|
return ret; |
|
} |
|
|
|
/* Add data to the end of the TX queue */ |
|
queue_put(&dev_data->tx.mem_block_queue, mem_block, size); |
|
|
|
return 0; |
|
} |
|
|
|
static const struct i2s_driver_api i2s_stm32_driver_api = { |
|
.configure = i2s_stm32_configure, |
|
.read = i2s_stm32_read, |
|
.write = i2s_stm32_write, |
|
.trigger = i2s_stm32_trigger, |
|
}; |
|
|
|
#define STM32_DMA_NUM_CHANNELS 8 |
|
static const struct device *active_dma_rx_channel[STM32_DMA_NUM_CHANNELS]; |
|
static const struct device *active_dma_tx_channel[STM32_DMA_NUM_CHANNELS]; |
|
|
|
static int reload_dma(const struct device *dev_dma, uint32_t channel, |
|
struct dma_config *dcfg, void *src, void *dst, |
|
uint32_t blk_size) |
|
{ |
|
int ret; |
|
|
|
ret = dma_reload(dev_dma, channel, (uint32_t)src, (uint32_t)dst, blk_size); |
|
if (ret < 0) { |
|
return ret; |
|
} |
|
|
|
ret = dma_start(dev_dma, channel); |
|
|
|
return ret; |
|
} |
|
|
|
static int start_dma(const struct device *dev_dma, uint32_t channel, |
|
struct dma_config *dcfg, void *src, |
|
bool src_addr_increment, void *dst, |
|
bool dst_addr_increment, uint8_t fifo_threshold, |
|
uint32_t blk_size) |
|
{ |
|
struct dma_block_config blk_cfg; |
|
int ret; |
|
|
|
memset(&blk_cfg, 0, sizeof(blk_cfg)); |
|
blk_cfg.block_size = blk_size; |
|
blk_cfg.source_address = (uint32_t)src; |
|
blk_cfg.dest_address = (uint32_t)dst; |
|
if (src_addr_increment) { |
|
blk_cfg.source_addr_adj = DMA_ADDR_ADJ_INCREMENT; |
|
} else { |
|
blk_cfg.source_addr_adj = DMA_ADDR_ADJ_NO_CHANGE; |
|
} |
|
if (dst_addr_increment) { |
|
blk_cfg.dest_addr_adj = DMA_ADDR_ADJ_INCREMENT; |
|
} else { |
|
blk_cfg.dest_addr_adj = DMA_ADDR_ADJ_NO_CHANGE; |
|
} |
|
blk_cfg.fifo_mode_control = fifo_threshold; |
|
|
|
dcfg->head_block = &blk_cfg; |
|
|
|
ret = dma_config(dev_dma, channel, dcfg); |
|
if (ret < 0) { |
|
return ret; |
|
} |
|
|
|
ret = dma_start(dev_dma, channel); |
|
|
|
return ret; |
|
} |
|
|
|
static const struct device *get_dev_from_rx_dma_channel(uint32_t dma_channel); |
|
static const struct device *get_dev_from_tx_dma_channel(uint32_t dma_channel); |
|
static void rx_stream_disable(struct stream *stream, const struct device *dev); |
|
static void tx_stream_disable(struct stream *stream, const struct device *dev); |
|
|
|
/* This function is executed in the interrupt context */ |
|
static void dma_rx_callback(const struct device *dma_dev, void *arg, |
|
uint32_t channel, int status) |
|
{ |
|
const struct device *dev = get_dev_from_rx_dma_channel(channel); |
|
const struct i2s_stm32_cfg *cfg = DEV_CFG(dev); |
|
struct i2s_stm32_data *const dev_data = DEV_DATA(dev); |
|
struct stream *stream = &dev_data->rx; |
|
void *mblk_tmp; |
|
int ret; |
|
|
|
if (status != 0) { |
|
ret = -EIO; |
|
stream->state = I2S_STATE_ERROR; |
|
goto rx_disable; |
|
} |
|
|
|
__ASSERT_NO_MSG(stream->mem_block != NULL); |
|
|
|
/* Stop reception if there was an error */ |
|
if (stream->state == I2S_STATE_ERROR) { |
|
goto rx_disable; |
|
} |
|
|
|
mblk_tmp = stream->mem_block; |
|
|
|
/* Prepare to receive the next data block */ |
|
ret = k_mem_slab_alloc(stream->cfg.mem_slab, &stream->mem_block, |
|
K_NO_WAIT); |
|
if (ret < 0) { |
|
stream->state = I2S_STATE_ERROR; |
|
goto rx_disable; |
|
} |
|
|
|
ret = reload_dma(dev_data->dev_dma_rx, stream->dma_channel, |
|
&stream->dma_cfg, |
|
(void *)LL_SPI_DMA_GetRegAddr(cfg->i2s), |
|
stream->mem_block, |
|
stream->cfg.block_size); |
|
if (ret < 0) { |
|
LOG_DBG("Failed to start RX DMA transfer: %d", ret); |
|
goto rx_disable; |
|
} |
|
|
|
/* Assure cache coherency after DMA write operation */ |
|
DCACHE_INVALIDATE(mblk_tmp, stream->cfg.block_size); |
|
|
|
/* All block data received */ |
|
ret = queue_put(&stream->mem_block_queue, mblk_tmp, |
|
stream->cfg.block_size); |
|
if (ret < 0) { |
|
stream->state = I2S_STATE_ERROR; |
|
goto rx_disable; |
|
} |
|
k_sem_give(&stream->sem); |
|
|
|
/* Stop reception if we were requested */ |
|
if (stream->state == I2S_STATE_STOPPING) { |
|
stream->state = I2S_STATE_READY; |
|
goto rx_disable; |
|
} |
|
|
|
return; |
|
|
|
rx_disable: |
|
rx_stream_disable(stream, dev); |
|
} |
|
|
|
static void dma_tx_callback(const struct device *dma_dev, void *arg, |
|
uint32_t channel, int status) |
|
{ |
|
const struct device *dev = get_dev_from_tx_dma_channel(channel); |
|
const struct i2s_stm32_cfg *cfg = DEV_CFG(dev); |
|
struct i2s_stm32_data *const dev_data = DEV_DATA(dev); |
|
struct stream *stream = &dev_data->tx; |
|
size_t mem_block_size; |
|
int ret; |
|
|
|
if (status != 0) { |
|
ret = -EIO; |
|
stream->state = I2S_STATE_ERROR; |
|
goto tx_disable; |
|
} |
|
|
|
__ASSERT_NO_MSG(stream->mem_block != NULL); |
|
|
|
/* All block data sent */ |
|
k_mem_slab_free(stream->cfg.mem_slab, &stream->mem_block); |
|
stream->mem_block = NULL; |
|
|
|
/* Stop transmission if there was an error */ |
|
if (stream->state == I2S_STATE_ERROR) { |
|
LOG_ERR("TX error detected"); |
|
goto tx_disable; |
|
} |
|
|
|
/* Stop transmission if we were requested */ |
|
if (stream->last_block) { |
|
stream->state = I2S_STATE_READY; |
|
goto tx_disable; |
|
} |
|
|
|
/* Prepare to send the next data block */ |
|
ret = queue_get(&stream->mem_block_queue, &stream->mem_block, |
|
&mem_block_size); |
|
if (ret < 0) { |
|
if (stream->state == I2S_STATE_STOPPING) { |
|
stream->state = I2S_STATE_READY; |
|
} else { |
|
stream->state = I2S_STATE_ERROR; |
|
} |
|
goto tx_disable; |
|
} |
|
k_sem_give(&stream->sem); |
|
|
|
/* Assure cache coherency before DMA read operation */ |
|
DCACHE_CLEAN(stream->mem_block, mem_block_size); |
|
|
|
ret = reload_dma(dev_data->dev_dma_tx, stream->dma_channel, |
|
&stream->dma_cfg, |
|
stream->mem_block, |
|
(void *)LL_SPI_DMA_GetRegAddr(cfg->i2s), |
|
stream->cfg.block_size); |
|
if (ret < 0) { |
|
LOG_DBG("Failed to start TX DMA transfer: %d", ret); |
|
goto tx_disable; |
|
} |
|
|
|
return; |
|
|
|
tx_disable: |
|
tx_stream_disable(stream, dev); |
|
} |
|
|
|
static uint32_t i2s_stm32_irq_count; |
|
static uint32_t i2s_stm32_irq_ovr_count; |
|
|
|
static void i2s_stm32_isr(const struct device *dev) |
|
{ |
|
const struct i2s_stm32_cfg *cfg = DEV_CFG(dev); |
|
struct i2s_stm32_data *const dev_data = DEV_DATA(dev); |
|
struct stream *stream = &dev_data->rx; |
|
|
|
LOG_ERR("%s: err=%d", __func__, (int)LL_I2S_ReadReg(cfg->i2s, SR)); |
|
stream->state = I2S_STATE_ERROR; |
|
|
|
/* OVR error must be explicitly cleared */ |
|
if (LL_I2S_IsActiveFlag_OVR(cfg->i2s)) { |
|
i2s_stm32_irq_ovr_count++; |
|
LL_I2S_ClearFlag_OVR(cfg->i2s); |
|
} |
|
|
|
i2s_stm32_irq_count++; |
|
} |
|
|
|
static int i2s_stm32_initialize(const struct device *dev) |
|
{ |
|
const struct i2s_stm32_cfg *cfg = DEV_CFG(dev); |
|
struct i2s_stm32_data *const dev_data = DEV_DATA(dev); |
|
int ret, i; |
|
|
|
/* Enable I2S clock propagation */ |
|
ret = i2s_stm32_enable_clock(dev); |
|
if (ret < 0) { |
|
LOG_ERR("%s: clock enabling failed: %d", __func__, ret); |
|
return -EIO; |
|
} |
|
|
|
/* Configure dt provided device signals when available */ |
|
ret = stm32_dt_pinctrl_configure(cfg->pinctrl_list, |
|
cfg->pinctrl_list_size, |
|
(uint32_t)cfg->i2s); |
|
if (ret < 0) { |
|
LOG_ERR("I2S pinctrl setup failed (%d)", ret); |
|
return ret; |
|
} |
|
|
|
cfg->irq_config(dev); |
|
|
|
k_sem_init(&dev_data->rx.sem, 0, CONFIG_I2S_STM32_RX_BLOCK_COUNT); |
|
k_sem_init(&dev_data->tx.sem, CONFIG_I2S_STM32_TX_BLOCK_COUNT, |
|
CONFIG_I2S_STM32_TX_BLOCK_COUNT); |
|
|
|
for (i = 0; i < STM32_DMA_NUM_CHANNELS; i++) { |
|
active_dma_rx_channel[i] = NULL; |
|
active_dma_tx_channel[i] = NULL; |
|
} |
|
|
|
/* Get the binding to the DMA device */ |
|
dev_data->dev_dma_tx = device_get_binding(dev_data->tx.dma_name); |
|
if (!dev_data->dev_dma_tx) { |
|
LOG_ERR("%s device not found", dev_data->tx.dma_name); |
|
return -ENODEV; |
|
} |
|
dev_data->dev_dma_rx = device_get_binding(dev_data->rx.dma_name); |
|
if (!dev_data->dev_dma_rx) { |
|
LOG_ERR("%s device not found", dev_data->rx.dma_name); |
|
return -ENODEV; |
|
} |
|
|
|
LOG_INF("%s inited", dev->name); |
|
|
|
return 0; |
|
} |
|
|
|
static int rx_stream_start(struct stream *stream, const struct device *dev) |
|
{ |
|
const struct i2s_stm32_cfg *cfg = DEV_CFG(dev); |
|
struct i2s_stm32_data *const dev_data = DEV_DATA(dev); |
|
int ret; |
|
|
|
ret = k_mem_slab_alloc(stream->cfg.mem_slab, &stream->mem_block, |
|
K_NO_WAIT); |
|
if (ret < 0) { |
|
return ret; |
|
} |
|
|
|
if (stream->master) { |
|
LL_I2S_SetTransferMode(cfg->i2s, LL_I2S_MODE_MASTER_RX); |
|
} else { |
|
LL_I2S_SetTransferMode(cfg->i2s, LL_I2S_MODE_SLAVE_RX); |
|
} |
|
|
|
/* remember active RX DMA channel (used in callback) */ |
|
active_dma_rx_channel[stream->dma_channel] = dev; |
|
|
|
ret = start_dma(dev_data->dev_dma_rx, stream->dma_channel, |
|
&stream->dma_cfg, |
|
(void *)LL_SPI_DMA_GetRegAddr(cfg->i2s), |
|
stream->src_addr_increment, stream->mem_block, |
|
stream->dst_addr_increment, stream->fifo_threshold, |
|
stream->cfg.block_size); |
|
if (ret < 0) { |
|
LOG_ERR("Failed to start RX DMA transfer: %d", ret); |
|
return ret; |
|
} |
|
|
|
LL_I2S_EnableDMAReq_RX(cfg->i2s); |
|
|
|
LL_I2S_EnableIT_ERR(cfg->i2s); |
|
LL_I2S_Enable(cfg->i2s); |
|
|
|
return 0; |
|
} |
|
|
|
static int tx_stream_start(struct stream *stream, const struct device *dev) |
|
{ |
|
const struct i2s_stm32_cfg *cfg = DEV_CFG(dev); |
|
struct i2s_stm32_data *const dev_data = DEV_DATA(dev); |
|
size_t mem_block_size; |
|
int ret; |
|
|
|
ret = queue_get(&stream->mem_block_queue, &stream->mem_block, |
|
&mem_block_size); |
|
if (ret < 0) { |
|
return ret; |
|
} |
|
k_sem_give(&stream->sem); |
|
|
|
/* Assure cache coherency before DMA read operation */ |
|
DCACHE_CLEAN(stream->mem_block, mem_block_size); |
|
|
|
if (stream->master) { |
|
LL_I2S_SetTransferMode(cfg->i2s, LL_I2S_MODE_MASTER_TX); |
|
} else { |
|
LL_I2S_SetTransferMode(cfg->i2s, LL_I2S_MODE_SLAVE_TX); |
|
} |
|
|
|
/* remember active TX DMA channel (used in callback) */ |
|
active_dma_tx_channel[stream->dma_channel] = dev; |
|
|
|
ret = start_dma(dev_data->dev_dma_tx, stream->dma_channel, |
|
&stream->dma_cfg, |
|
stream->mem_block, stream->src_addr_increment, |
|
(void *)LL_SPI_DMA_GetRegAddr(cfg->i2s), |
|
stream->dst_addr_increment, stream->fifo_threshold, |
|
stream->cfg.block_size); |
|
if (ret < 0) { |
|
LOG_ERR("Failed to start TX DMA transfer: %d", ret); |
|
return ret; |
|
} |
|
|
|
LL_I2S_EnableDMAReq_TX(cfg->i2s); |
|
|
|
LL_I2S_EnableIT_ERR(cfg->i2s); |
|
LL_I2S_Enable(cfg->i2s); |
|
|
|
return 0; |
|
} |
|
|
|
static void rx_stream_disable(struct stream *stream, const struct device *dev) |
|
{ |
|
const struct i2s_stm32_cfg *cfg = DEV_CFG(dev); |
|
struct i2s_stm32_data *const dev_data = DEV_DATA(dev); |
|
const struct device *dev_dma = dev_data->dev_dma_rx; |
|
|
|
LL_I2S_DisableDMAReq_RX(cfg->i2s); |
|
LL_I2S_DisableIT_ERR(cfg->i2s); |
|
|
|
dma_stop(dev_dma, stream->dma_channel); |
|
if (stream->mem_block != NULL) { |
|
k_mem_slab_free(stream->cfg.mem_slab, &stream->mem_block); |
|
stream->mem_block = NULL; |
|
} |
|
|
|
LL_I2S_Disable(cfg->i2s); |
|
|
|
active_dma_rx_channel[stream->dma_channel] = NULL; |
|
} |
|
|
|
static void tx_stream_disable(struct stream *stream, const struct device *dev) |
|
{ |
|
const struct i2s_stm32_cfg *cfg = DEV_CFG(dev); |
|
struct i2s_stm32_data *const dev_data = DEV_DATA(dev); |
|
const struct device *dev_dma = dev_data->dev_dma_tx; |
|
|
|
LL_I2S_DisableDMAReq_TX(cfg->i2s); |
|
LL_I2S_DisableIT_ERR(cfg->i2s); |
|
|
|
dma_stop(dev_dma, stream->dma_channel); |
|
if (stream->mem_block != NULL) { |
|
k_mem_slab_free(stream->cfg.mem_slab, &stream->mem_block); |
|
stream->mem_block = NULL; |
|
} |
|
|
|
LL_I2S_Disable(cfg->i2s); |
|
|
|
active_dma_tx_channel[stream->dma_channel] = NULL; |
|
} |
|
|
|
static void rx_queue_drop(struct stream *stream) |
|
{ |
|
size_t size; |
|
void *mem_block; |
|
|
|
while (queue_get(&stream->mem_block_queue, &mem_block, &size) == 0) { |
|
k_mem_slab_free(stream->cfg.mem_slab, &mem_block); |
|
} |
|
|
|
k_sem_reset(&stream->sem); |
|
} |
|
|
|
static void tx_queue_drop(struct stream *stream) |
|
{ |
|
size_t size; |
|
void *mem_block; |
|
unsigned int n = 0U; |
|
|
|
while (queue_get(&stream->mem_block_queue, &mem_block, &size) == 0) { |
|
k_mem_slab_free(stream->cfg.mem_slab, &mem_block); |
|
n++; |
|
} |
|
|
|
for (; n > 0; n--) { |
|
k_sem_give(&stream->sem); |
|
} |
|
} |
|
|
|
static const struct device *get_dev_from_rx_dma_channel(uint32_t dma_channel) |
|
{ |
|
return active_dma_rx_channel[dma_channel]; |
|
} |
|
|
|
static const struct device *get_dev_from_tx_dma_channel(uint32_t dma_channel) |
|
{ |
|
return active_dma_tx_channel[dma_channel]; |
|
} |
|
|
|
/* src_dev and dest_dev should be 'MEMORY' or 'PERIPHERAL'. */ |
|
#define I2S_DMA_CHANNEL_INIT(index, dir, dir_cap, src_dev, dest_dev) \ |
|
.dir = { \ |
|
.dma_name = DT_DMAS_LABEL_BY_NAME(DT_NODELABEL(i2s##index), dir),\ |
|
.dma_channel = \ |
|
DT_DMAS_CELL_BY_NAME(DT_NODELABEL(i2s##index), dir, channel),\ |
|
.dma_cfg = { \ |
|
.block_count = 2, \ |
|
.dma_slot = \ |
|
DT_DMAS_CELL_BY_NAME(DT_NODELABEL(i2s##index), dir, slot),\ |
|
.channel_direction = src_dev##_TO_##dest_dev, \ |
|
.source_data_size = 2, /* 16bit default */ \ |
|
.dest_data_size = 2, /* 16bit default */ \ |
|
.source_burst_length = 0, /* SINGLE transfer */ \ |
|
.dest_burst_length = 1, \ |
|
.channel_priority = STM32_DMA_CONFIG_PRIORITY( \ |
|
DT_DMAS_CELL_BY_NAME(DT_NODELABEL(i2s##index), dir, channel_config)),\ |
|
.dma_callback = dma_##dir##_callback, \ |
|
}, \ |
|
.src_addr_increment = STM32_DMA_CONFIG_##src_dev##_ADDR_INC( \ |
|
DT_DMAS_CELL_BY_NAME(DT_NODELABEL(i2s##index), dir, channel_config)),\ |
|
.dst_addr_increment = STM32_DMA_CONFIG_##dest_dev##_ADDR_INC( \ |
|
DT_DMAS_CELL_BY_NAME(DT_NODELABEL(i2s##index), dir, channel_config)),\ |
|
.fifo_threshold = STM32_DMA_FEATURES_FIFO_THRESHOLD( \ |
|
DT_DMAS_CELL_BY_NAME(DT_NODELABEL(i2s##index), dir, channel_config)),\ |
|
.stream_start = dir##_stream_start, \ |
|
.stream_disable = dir##_stream_disable, \ |
|
.queue_drop = dir##_queue_drop, \ |
|
.mem_block_queue.buf = dir##_##index##_ring_buf, \ |
|
.mem_block_queue.len = ARRAY_SIZE(dir##_##index##_ring_buf) \ |
|
} |
|
|
|
#define I2S_INIT(index, clk_sel) \ |
|
static const struct soc_gpio_pinctrl i2s_pins_##index[] = \ |
|
ST_STM32_DT_INST_PINCTRL(index, 0);\ |
|
\ |
|
static void i2s_stm32_irq_config_func_##index(const struct device *dev);\ |
|
\ |
|
static const struct i2s_stm32_cfg i2s_stm32_config_##index = { \ |
|
.i2s = (SPI_TypeDef *) DT_REG_ADDR(DT_NODELABEL(i2s##index)), \ |
|
.pclken = { \ |
|
.enr = DT_CLOCKS_CELL(DT_NODELABEL(i2s##index), bits), \ |
|
.bus = DT_CLOCKS_CELL(DT_NODELABEL(i2s##index), bus), \ |
|
}, \ |
|
.i2s_clk_sel = CLK_SEL_##clk_sel, \ |
|
.pinctrl_list = i2s_pins_##index, \ |
|
.pinctrl_list_size = ARRAY_SIZE(i2s_pins_##index), \ |
|
.irq_config = i2s_stm32_irq_config_func_##index, \ |
|
}; \ |
|
\ |
|
struct queue_item rx_##index##_ring_buf[CONFIG_I2S_STM32_RX_BLOCK_COUNT + 1];\ |
|
struct queue_item tx_##index##_ring_buf[CONFIG_I2S_STM32_TX_BLOCK_COUNT + 1];\ |
|
\ |
|
static struct i2s_stm32_data i2s_stm32_data_##index = { \ |
|
UTIL_AND(DT_DMAS_HAS_NAME(DT_NODELABEL(i2s##index), rx), \ |
|
I2S_DMA_CHANNEL_INIT(index, rx, RX, PERIPHERAL, MEMORY)),\ |
|
UTIL_AND(DT_DMAS_HAS_NAME(DT_NODELABEL(i2s##index), tx), \ |
|
I2S_DMA_CHANNEL_INIT(index, tx, TX, MEMORY, PERIPHERAL)),\ |
|
}; \ |
|
DEVICE_DT_DEFINE(DT_NODELABEL(i2s##index), \ |
|
&i2s_stm32_initialize, device_pm_control_nop, \ |
|
&i2s_stm32_data_##index, \ |
|
&i2s_stm32_config_##index, POST_KERNEL, \ |
|
CONFIG_I2S_INIT_PRIORITY, &i2s_stm32_driver_api); \ |
|
\ |
|
static void i2s_stm32_irq_config_func_##index(const struct device *dev) \ |
|
{ \ |
|
IRQ_CONNECT(DT_IRQN(DT_NODELABEL(i2s##index)), \ |
|
DT_IRQ(DT_NODELABEL(i2s##index), priority), \ |
|
i2s_stm32_isr, DEVICE_DT_GET(DT_NODELABEL(i2s##index)), 0);\ |
|
irq_enable(DT_IRQN(DT_NODELABEL(i2s##index))); \ |
|
} |
|
|
|
#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2s1), okay) |
|
I2S_INIT(1, 2) |
|
#endif |
|
|
|
#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2s2), okay) |
|
I2S_INIT(2, 1) |
|
#endif |
|
|
|
#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2s3), okay) |
|
I2S_INIT(3, 1) |
|
#endif |
|
|
|
#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2s4), okay) |
|
I2S_INIT(4, 2) |
|
#endif |
|
|
|
#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2s5), okay) |
|
I2S_INIT(5, 2) |
|
#endif
|
|
|