You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
357 lines
8.9 KiB
357 lines
8.9 KiB
/* |
|
* Copyright (c) 2017 Piotr Mienkowski |
|
* |
|
* SPDX-License-Identifier: Apache-2.0 |
|
*/ |
|
|
|
#define DT_DRV_COMPAT atmel_sam_i2c_twihs |
|
|
|
/** @file |
|
* @brief I2C bus (TWIHS) driver for Atmel SAM MCU family. |
|
* |
|
* Only I2C Master Mode with 7 bit addressing is currently supported. |
|
*/ |
|
|
|
|
|
#include <errno.h> |
|
#include <sys/__assert.h> |
|
#include <kernel.h> |
|
#include <device.h> |
|
#include <init.h> |
|
#include <soc.h> |
|
#include <drivers/i2c.h> |
|
|
|
#define LOG_LEVEL CONFIG_I2C_LOG_LEVEL |
|
#include <logging/log.h> |
|
LOG_MODULE_REGISTER(i2c_sam_twihs); |
|
|
|
#include "i2c-priv.h" |
|
|
|
/** I2C bus speed [Hz] in Standard Mode */ |
|
#define BUS_SPEED_STANDARD_HZ 100000U |
|
/** I2C bus speed [Hz] in Fast Mode */ |
|
#define BUS_SPEED_FAST_HZ 400000U |
|
/** I2C bus speed [Hz] in High Speed Mode */ |
|
#define BUS_SPEED_HIGH_HZ 3400000U |
|
/* Maximum value of Clock Divider (CKDIV) */ |
|
#define CKDIV_MAX 7 |
|
|
|
/* Device constant configuration parameters */ |
|
struct i2c_sam_twihs_dev_cfg { |
|
Twihs *regs; |
|
void (*irq_config)(void); |
|
uint32_t bitrate; |
|
const struct soc_gpio_pin *pin_list; |
|
uint8_t pin_list_size; |
|
uint8_t periph_id; |
|
uint8_t irq_id; |
|
}; |
|
|
|
struct twihs_msg { |
|
/* Buffer containing data to read or write */ |
|
uint8_t *buf; |
|
/* Length of the buffer */ |
|
uint32_t len; |
|
/* Index of the next byte to be read/written from/to the buffer */ |
|
uint32_t idx; |
|
/* Value of TWIHS_SR at the end of the message */ |
|
uint32_t twihs_sr; |
|
/* Transfer flags as defined in the i2c.h file */ |
|
uint8_t flags; |
|
}; |
|
|
|
/* Device run time data */ |
|
struct i2c_sam_twihs_dev_data { |
|
struct k_sem sem; |
|
struct twihs_msg msg; |
|
}; |
|
|
|
#define DEV_NAME(dev) ((dev)->name) |
|
#define DEV_CFG(dev) \ |
|
((const struct i2c_sam_twihs_dev_cfg *const)(dev)->config) |
|
#define DEV_DATA(dev) \ |
|
((struct i2c_sam_twihs_dev_data *const)(dev)->data) |
|
|
|
static int i2c_clk_set(Twihs *const twihs, uint32_t speed) |
|
{ |
|
uint32_t ck_div = 0U; |
|
uint32_t cl_div; |
|
bool div_completed = false; |
|
|
|
/* From the datasheet "TWIHS Clock Waveform Generator Register" |
|
* T_low = ( ( CLDIV × 2^CKDIV ) + 3 ) × T_MCK |
|
*/ |
|
while (!div_completed) { |
|
cl_div = ((SOC_ATMEL_SAM_MCK_FREQ_HZ / (speed * 2U)) - 3) |
|
/ (1 << ck_div); |
|
|
|
if (cl_div <= 255U) { |
|
div_completed = true; |
|
} else { |
|
ck_div++; |
|
} |
|
} |
|
|
|
if (ck_div > CKDIV_MAX) { |
|
LOG_ERR("Failed to configure I2C clock"); |
|
return -EIO; |
|
} |
|
|
|
/* Set I2C bus clock duty cycle to 50% */ |
|
twihs->TWIHS_CWGR = TWIHS_CWGR_CLDIV(cl_div) | TWIHS_CWGR_CHDIV(cl_div) |
|
| TWIHS_CWGR_CKDIV(ck_div); |
|
|
|
return 0; |
|
} |
|
|
|
static int i2c_sam_twihs_configure(const struct device *dev, uint32_t config) |
|
{ |
|
const struct i2c_sam_twihs_dev_cfg *const dev_cfg = DEV_CFG(dev); |
|
Twihs *const twihs = dev_cfg->regs; |
|
uint32_t bitrate; |
|
int ret; |
|
|
|
if (!(config & I2C_MODE_MASTER)) { |
|
LOG_ERR("Master Mode is not enabled"); |
|
return -EIO; |
|
} |
|
|
|
if (config & I2C_ADDR_10_BITS) { |
|
LOG_ERR("I2C 10-bit addressing is currently not supported"); |
|
LOG_ERR("Please submit a patch"); |
|
return -EIO; |
|
} |
|
|
|
/* Configure clock */ |
|
switch (I2C_SPEED_GET(config)) { |
|
case I2C_SPEED_STANDARD: |
|
bitrate = BUS_SPEED_STANDARD_HZ; |
|
break; |
|
case I2C_SPEED_FAST: |
|
bitrate = BUS_SPEED_FAST_HZ; |
|
break; |
|
default: |
|
LOG_ERR("Unsupported I2C speed value"); |
|
return -EIO; |
|
} |
|
|
|
/* Setup clock waveform */ |
|
ret = i2c_clk_set(twihs, bitrate); |
|
if (ret < 0) { |
|
return ret; |
|
} |
|
|
|
/* Disable Slave Mode */ |
|
twihs->TWIHS_CR = TWIHS_CR_SVDIS; |
|
|
|
/* Enable Master Mode */ |
|
twihs->TWIHS_CR = TWIHS_CR_MSEN; |
|
|
|
return 0; |
|
} |
|
|
|
static void write_msg_start(Twihs *const twihs, struct twihs_msg *msg, |
|
uint8_t daddr) |
|
{ |
|
/* Set slave address. */ |
|
twihs->TWIHS_MMR = TWIHS_MMR_DADR(daddr); |
|
|
|
/* Write first data byte on I2C bus */ |
|
twihs->TWIHS_THR = msg->buf[msg->idx++]; |
|
|
|
/* Enable Transmit Ready and Transmission Completed interrupts */ |
|
twihs->TWIHS_IER = TWIHS_IER_TXRDY | TWIHS_IER_TXCOMP | TWIHS_IER_NACK; |
|
} |
|
|
|
static void read_msg_start(Twihs *const twihs, struct twihs_msg *msg, |
|
uint8_t daddr) |
|
{ |
|
uint32_t twihs_cr_stop; |
|
|
|
/* Set slave address and number of internal address bytes */ |
|
twihs->TWIHS_MMR = TWIHS_MMR_MREAD | TWIHS_MMR_DADR(daddr); |
|
|
|
/* Enable Receive Ready and Transmission Completed interrupts */ |
|
twihs->TWIHS_IER = TWIHS_IER_RXRDY | TWIHS_IER_TXCOMP | TWIHS_IER_NACK; |
|
|
|
/* In single data byte read the START and STOP must both be set */ |
|
twihs_cr_stop = (msg->len == 1U) ? TWIHS_CR_STOP : 0; |
|
/* Start the transfer by sending START condition */ |
|
twihs->TWIHS_CR = TWIHS_CR_START | twihs_cr_stop; |
|
} |
|
|
|
static int i2c_sam_twihs_transfer(const struct device *dev, |
|
struct i2c_msg *msgs, |
|
uint8_t num_msgs, uint16_t addr) |
|
{ |
|
const struct i2c_sam_twihs_dev_cfg *const dev_cfg = DEV_CFG(dev); |
|
struct i2c_sam_twihs_dev_data *const dev_data = DEV_DATA(dev); |
|
Twihs *const twihs = dev_cfg->regs; |
|
|
|
__ASSERT_NO_MSG(msgs); |
|
if (!num_msgs) { |
|
return 0; |
|
} |
|
|
|
/* Clear pending interrupts, such as NACK. */ |
|
(void)twihs->TWIHS_SR; |
|
|
|
/* Set number of internal address bytes to 0, not used. */ |
|
twihs->TWIHS_IADR = 0; |
|
|
|
for (int i = 0; i < num_msgs; i++) { |
|
dev_data->msg.buf = msgs[i].buf; |
|
dev_data->msg.len = msgs[i].len; |
|
dev_data->msg.idx = 0U; |
|
dev_data->msg.twihs_sr = 0U; |
|
dev_data->msg.flags = msgs[i].flags; |
|
if ((msgs[i].flags & I2C_MSG_RW_MASK) == I2C_MSG_READ) { |
|
read_msg_start(twihs, &dev_data->msg, addr); |
|
} else { |
|
write_msg_start(twihs, &dev_data->msg, addr); |
|
} |
|
/* Wait for the transfer to complete */ |
|
k_sem_take(&dev_data->sem, K_FOREVER); |
|
|
|
if (dev_data->msg.twihs_sr > 0) { |
|
/* Something went wrong */ |
|
return -EIO; |
|
} |
|
} |
|
|
|
return 0; |
|
} |
|
|
|
static void i2c_sam_twihs_isr(const struct device *dev) |
|
{ |
|
const struct i2c_sam_twihs_dev_cfg *const dev_cfg = DEV_CFG(dev); |
|
struct i2c_sam_twihs_dev_data *const dev_data = DEV_DATA(dev); |
|
Twihs *const twihs = dev_cfg->regs; |
|
struct twihs_msg *msg = &dev_data->msg; |
|
uint32_t isr_status; |
|
|
|
/* Retrieve interrupt status */ |
|
isr_status = twihs->TWIHS_SR & twihs->TWIHS_IMR; |
|
|
|
/* Not Acknowledged */ |
|
if (isr_status & TWIHS_SR_NACK) { |
|
msg->twihs_sr = isr_status; |
|
goto tx_comp; |
|
} |
|
|
|
/* Byte received */ |
|
if (isr_status & TWIHS_SR_RXRDY) { |
|
|
|
msg->buf[msg->idx++] = twihs->TWIHS_RHR; |
|
|
|
if (msg->idx == msg->len - 1U) { |
|
/* Send STOP condition */ |
|
twihs->TWIHS_CR = TWIHS_CR_STOP; |
|
} |
|
} |
|
|
|
/* Byte sent */ |
|
if (isr_status & TWIHS_SR_TXRDY) { |
|
if (msg->idx == msg->len) { |
|
if (msg->flags & I2C_MSG_STOP) { |
|
/* Send STOP condition */ |
|
twihs->TWIHS_CR = TWIHS_CR_STOP; |
|
/* Disable Transmit Ready interrupt */ |
|
twihs->TWIHS_IDR = TWIHS_IDR_TXRDY; |
|
} else { |
|
/* Transmission completed */ |
|
goto tx_comp; |
|
} |
|
} else { |
|
twihs->TWIHS_THR = msg->buf[msg->idx++]; |
|
} |
|
} |
|
|
|
/* Transmission completed */ |
|
if (isr_status & TWIHS_SR_TXCOMP) { |
|
goto tx_comp; |
|
} |
|
|
|
return; |
|
|
|
tx_comp: |
|
/* Disable all enabled interrupts */ |
|
twihs->TWIHS_IDR = twihs->TWIHS_IMR; |
|
/* We are done */ |
|
k_sem_give(&dev_data->sem); |
|
} |
|
|
|
static int i2c_sam_twihs_initialize(const struct device *dev) |
|
{ |
|
const struct i2c_sam_twihs_dev_cfg *const dev_cfg = DEV_CFG(dev); |
|
struct i2c_sam_twihs_dev_data *const dev_data = DEV_DATA(dev); |
|
Twihs *const twihs = dev_cfg->regs; |
|
uint32_t bitrate_cfg; |
|
int ret; |
|
|
|
/* Configure interrupts */ |
|
dev_cfg->irq_config(); |
|
|
|
/* Initialize semaphore */ |
|
k_sem_init(&dev_data->sem, 0, 1); |
|
|
|
/* Connect pins to the peripheral */ |
|
soc_gpio_list_configure(dev_cfg->pin_list, dev_cfg->pin_list_size); |
|
|
|
/* Enable module's clock */ |
|
soc_pmc_peripheral_enable(dev_cfg->periph_id); |
|
|
|
/* Reset the module */ |
|
twihs->TWIHS_CR = TWIHS_CR_SWRST; |
|
|
|
bitrate_cfg = i2c_map_dt_bitrate(dev_cfg->bitrate); |
|
|
|
ret = i2c_sam_twihs_configure(dev, I2C_MODE_MASTER | bitrate_cfg); |
|
if (ret < 0) { |
|
LOG_ERR("Failed to initialize %s device", DEV_NAME(dev)); |
|
return ret; |
|
} |
|
|
|
/* Enable module's IRQ */ |
|
irq_enable(dev_cfg->irq_id); |
|
|
|
LOG_INF("Device %s initialized", DEV_NAME(dev)); |
|
|
|
return 0; |
|
} |
|
|
|
static const struct i2c_driver_api i2c_sam_twihs_driver_api = { |
|
.configure = i2c_sam_twihs_configure, |
|
.transfer = i2c_sam_twihs_transfer, |
|
}; |
|
|
|
#define I2C_TWIHS_SAM_INIT(n) \ |
|
static void i2c##n##_sam_irq_config(void) \ |
|
{ \ |
|
IRQ_CONNECT(DT_INST_IRQN(n), DT_INST_IRQ(n, priority), \ |
|
i2c_sam_twihs_isr, \ |
|
DEVICE_DT_INST_GET(n), 0); \ |
|
} \ |
|
\ |
|
static const struct soc_gpio_pin pins_twihs##n[] = \ |
|
{ATMEL_SAM_DT_PIN(n, 0), ATMEL_SAM_DT_PIN(n, 1)}; \ |
|
\ |
|
static const struct i2c_sam_twihs_dev_cfg i2c##n##_sam_config = {\ |
|
.regs = (Twihs *)DT_INST_REG_ADDR(n), \ |
|
.irq_config = i2c##n##_sam_irq_config, \ |
|
.periph_id = DT_INST_PROP(n, peripheral_id), \ |
|
.irq_id = DT_INST_IRQN(n), \ |
|
.pin_list = pins_twihs##n, \ |
|
.pin_list_size = ARRAY_SIZE(pins_twihs##n), \ |
|
.bitrate = DT_INST_PROP(n, clock_frequency), \ |
|
}; \ |
|
\ |
|
static struct i2c_sam_twihs_dev_data i2c##n##_sam_data; \ |
|
\ |
|
DEVICE_DT_INST_DEFINE(n, &i2c_sam_twihs_initialize, \ |
|
device_pm_control_nop, \ |
|
&i2c##n##_sam_data, &i2c##n##_sam_config, \ |
|
POST_KERNEL, CONFIG_I2C_INIT_PRIORITY, \ |
|
&i2c_sam_twihs_driver_api); |
|
|
|
DT_INST_FOREACH_STATUS_OKAY(I2C_TWIHS_SAM_INIT)
|
|
|