Primary Git Repository for the Zephyr Project. Zephyr is a new generation, scalable, optimized, secure RTOS for multiple hardware architectures.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

182 lines
5.2 KiB

/*
* Copyright (c) 2024 Nordic Semiconductor ASA
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT nordic_npm2100_gpio
#include <errno.h>
#include <zephyr/drivers/gpio.h>
#include <zephyr/drivers/gpio/gpio_utils.h>
#include <zephyr/drivers/i2c.h>
#include <zephyr/dt-bindings/gpio/nordic-npm2100-gpio.h>
#include <zephyr/kernel.h>
#include <zephyr/sys/util_macro.h>
#define NPM2100_GPIO_CONFIG 0x80U
#define NPM2100_GPIO_USAGE 0x83U
#define NPM2100_GPIO_OUTPUT 0x86U
#define NPM2100_GPIO_READ 0x89U
#define NPM2100_GPIO_PINS 2U
#define NPM2100_GPIO_CONFIG_INPUT 0x01U
#define NPM2100_GPIO_CONFIG_OUTPUT 0x02U
#define NPM2100_GPIO_CONFIG_OPENDRAIN 0x04U
#define NPM2100_GPIO_CONFIG_PULLDOWN 0x08U
#define NPM2100_GPIO_CONFIG_PULLUP 0x10U
#define NPM2100_GPIO_CONFIG_DRIVE 0x20U
#define NPM2100_GPIO_CONFIG_DEBOUNCE 0x40U
struct gpio_npm2100_config {
struct gpio_driver_config common;
struct i2c_dt_spec i2c;
};
struct gpio_npm2100_data {
struct gpio_driver_data common;
};
static int gpio_npm2100_port_get_raw(const struct device *dev, uint32_t *value)
{
const struct gpio_npm2100_config *config = dev->config;
uint8_t data;
int ret;
ret = i2c_reg_read_byte_dt(&config->i2c, NPM2100_GPIO_READ, &data);
if (ret < 0) {
return ret;
}
*value = data;
return 0;
}
static int gpio_npm2100_port_set_masked_raw(const struct device *dev, gpio_port_pins_t mask,
gpio_port_value_t value)
{
const struct gpio_npm2100_config *config = dev->config;
int ret = 0;
for (size_t idx = 0; idx < NPM2100_GPIO_PINS; idx++) {
if ((mask & BIT(idx)) != 0U) {
ret = i2c_reg_write_byte_dt(&config->i2c, NPM2100_GPIO_OUTPUT + idx,
!!(value & BIT(idx)));
if (ret != 0U) {
return ret;
}
}
}
return ret;
}
static int gpio_npm2100_port_set_bits_raw(const struct device *dev, gpio_port_pins_t pins)
{
return gpio_npm2100_port_set_masked_raw(dev, pins, pins);
}
static int gpio_npm2100_port_clear_bits_raw(const struct device *dev, gpio_port_pins_t pins)
{
return gpio_npm2100_port_set_masked_raw(dev, pins, 0U);
}
static inline int gpio_npm2100_configure(const struct device *dev, gpio_pin_t pin,
gpio_flags_t flags)
{
const struct gpio_npm2100_config *config = dev->config;
uint8_t reg = 0U;
if (k_is_in_isr()) {
return -EWOULDBLOCK;
}
if (pin >= NPM2100_GPIO_PINS) {
return -EINVAL;
}
/* Set initial state if defined */
if ((flags & (GPIO_OUTPUT_INIT_LOW | GPIO_OUTPUT_INIT_HIGH)) != 0U) {
int ret = i2c_reg_write_byte_dt(&config->i2c, NPM2100_GPIO_OUTPUT + pin,
!!(flags & GPIO_OUTPUT_INIT_HIGH));
if (ret < 0) {
return ret;
}
}
/* Set pin configuration */
if ((flags & GPIO_INPUT) != 0U) {
reg |= NPM2100_GPIO_CONFIG_INPUT;
}
if ((flags & GPIO_OUTPUT) != 0U) {
reg |= NPM2100_GPIO_CONFIG_OUTPUT;
}
if ((flags & GPIO_SINGLE_ENDED) != 0U) {
reg |= NPM2100_GPIO_CONFIG_OPENDRAIN;
}
if ((flags & GPIO_PULL_UP) != 0U) {
reg |= NPM2100_GPIO_CONFIG_PULLUP;
}
if ((flags & GPIO_PULL_DOWN) != 0U) {
reg |= NPM2100_GPIO_CONFIG_PULLDOWN;
}
if ((flags & NPM2100_GPIO_DRIVE_HIGH) != 0U) {
reg |= NPM2100_GPIO_CONFIG_DRIVE;
}
if ((flags & NPM2100_GPIO_DEBOUNCE_ON) != 0U) {
reg |= NPM2100_GPIO_CONFIG_DEBOUNCE;
}
return i2c_reg_write_byte_dt(&config->i2c, NPM2100_GPIO_CONFIG + pin, reg);
}
static int gpio_npm2100_port_toggle_bits(const struct device *dev, gpio_port_pins_t pins)
{
int ret;
uint32_t value;
ret = gpio_npm2100_port_get_raw(dev, &value);
if (ret < 0) {
return ret;
}
return gpio_npm2100_port_set_masked_raw(dev, pins, ~value);
}
static DEVICE_API(gpio, gpio_npm2100_api) = {
.pin_configure = gpio_npm2100_configure,
.port_get_raw = gpio_npm2100_port_get_raw,
.port_set_masked_raw = gpio_npm2100_port_set_masked_raw,
.port_set_bits_raw = gpio_npm2100_port_set_bits_raw,
.port_clear_bits_raw = gpio_npm2100_port_clear_bits_raw,
.port_toggle_bits = gpio_npm2100_port_toggle_bits,
};
static int gpio_npm2100_init(const struct device *dev)
{
const struct gpio_npm2100_config *config = dev->config;
if (!i2c_is_ready_dt(&config->i2c)) {
return -ENODEV;
}
return 0;
}
#define GPIO_NPM2100_DEFINE(n) \
static const struct gpio_npm2100_config gpio_npm2100_config##n = { \
.common = \
{ \
.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(n), \
}, \
.i2c = I2C_DT_SPEC_GET(DT_INST_PARENT(n))}; \
\
static struct gpio_npm2100_data gpio_npm2100_data##n; \
\
DEVICE_DT_INST_DEFINE(n, &gpio_npm2100_init, NULL, &gpio_npm2100_data##n, \
&gpio_npm2100_config##n, POST_KERNEL, \
CONFIG_GPIO_NPM2100_INIT_PRIORITY, &gpio_npm2100_api);
DT_INST_FOREACH_STATUS_OKAY(GPIO_NPM2100_DEFINE)