/*
 * Copyright 2024-2025 NXP
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;

#include <nxp/nxp_rt7xx_cm33_cpu0.dtsi>
#include <zephyr/dt-bindings/i2c/i2c.h>
#include <zephyr/dt-bindings/input/input-event-codes.h>
#include "mimxrt700_evk-pinctrl.dtsi"

/ {
	model = "NXP MIMXRT700-EVK board";
	compatible = "nxp,mimxrt798s";

	aliases {
		led0 = &green_led;
		led1 = &blue_led;
		sw0 = &user_button_1;
		sw1 = &user_button_2;
		watchdog0 = &wwdt0;
		pwm-0 = &sc_timer;
		i2s-codec-tx = &sai0;
		i2s-tx = &sai0;
	};

	chosen {
		zephyr,flash-controller = &mx25um51345g;
		zephyr,flash = &mx25um51345g;
		zephyr,sram = &sram0;
		zephyr,console = &flexcomm0_lpuart0;
		zephyr,shell-uart = &flexcomm0_lpuart0;
		zephyr,display = &lcdif;
	};

	leds {
		compatible = "gpio-leds";
		green_led: led_0 {
			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
			label = "User LED_GREEN";
		};
		blue_led: led_1 {
			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
			label = "User LED_BLUE";
		};
	};

	gpio_keys {
		compatible = "gpio-keys";
		user_button_1: button_0 {
			label = "User SW5";
			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
			zephyr,code = <INPUT_KEY_0>;
		};
		user_button_2: button_1 {
			label = "User SW7";
			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
			zephyr,code = <INPUT_KEY_1>;
		};
	};

	/*
	 * This node describes the GPIO pins of the MIPI FPC interface,
	 * J50 on the EVK. This interface is standard to several
	 * NXP EVKs, and is used with several MIPI displays
	 * (available as zephyr shields)
	 */
	nxp_mipi_connector: mipi-connector {
		compatible = "gpio-nexus";
		#gpio-cells = <2>;
		gpio-map-mask = <0xffffffff 0xffffffc0>;
		gpio-map-pass-thru = <0 0x3f>;
		gpio-map =	<0  0 &gpio1 14 0>,	/* Pin 1, LEDK */
					<21 0 &gpio3 4 0>,	/* Pin 21, RESET */
					<22 0 &gpio3 5 0>,	/* Pin 22, LPTE */
					<26 0 &gpio0 6 0>,	/* Pin 26, CTP_I2C SDA */
					<27 0 &gpio0 7 0>,	/* Pin 27, CTP_I2C SCL */
					<28 0 &gpio3 8 0>,	/* Pin 28, CTP_RST */
					<29 0 &gpio1 13 0>,	/* Pin 29, CTP_INT */
					<32 0 &gpio1 10 0>,	/* Pin 32, PWR_EN */
					<34 0 &gpio1 14 0>;	/* Pin 34, BL_PWM */
	};

	en_mipi_display: enable-mipi-display {
		compatible = "regulator-fixed";
		regulator-name = "en_mipi_display";
		enable-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
		regulator-boot-on;
	};
};

&ctimer0 {
	status = "okay";
};

&edma0 {
	status = "okay";
};

/*
 * RT700-EVK board cm33_cpu0 uses OS timer as the kernel timer
 * In case we need to switch to SYSTICK timer, then
 * replace &os_timer with &systick
 */
&os_timer_cpu0 {
	status = "okay";
	wakeup-source;
};

&flexcomm0{
	status = "okay";
};

&flexcomm0_lpuart0 {
	status = "okay";
	current-speed = <115200>;
	pinctrl-0 = <&pinmux_flexcomm0_lpuart>;
	pinctrl-names = "default";
};

&lpspi14 {
	status = "okay";
	/* DMA channels 0 and 1, muxed to LPSPI14 RX and TX */
	dmas = <&edma0 0 73>, <&edma0 1 74>;
	dma-names = "rx", "tx";
	pinctrl-0 = <&pinmux_lpspi14>;
	pinctrl-names = "default";
};

&flexcomm2{
	status = "okay";
};

&flexcomm2_lpi2c2 {
	status = "okay";
	pinctrl-0 = <&pinmux_flexcomm2_i2c>;
	pinctrl-names = "default";
	clock-frequency = <I2C_BITRATE_STANDARD>;
	#address-cells = <1>;
	#size-cells = <0>;

	audio_codec: wm8962@1a {
		compatible = "wolfson,wm8962";
		reg = <0x1a>;
		clock-source = "MCLK";
		clocks = <&clkctl0 MCUX_SAI0_CLK>;
		clock-names = "mclk";
	};
};

&flexcomm8{
	status = "okay";
};

&flexcomm8_lpi2c8 {
	pinctrl-0 = <&pinmux_flexcomm8_i2c>;
	pinctrl-names = "default";
	clock-frequency = <I2C_BITRATE_STANDARD>;
};

nxp_mipi_i2c: &flexcomm8_lpi2c8 {};

zephyr_mipi_dsi: &mipi_dsi {};

zephyr_lcdif: &lcdif {};

&gpio0 {
	status = "okay";
};

&gpio1 {
	status = "okay";
};

&gpio2 {
	status = "okay";
};

&gpio3 {
	status = "okay";
};

&green_led {
	status = "okay";
};

&lpadc0 {
	status = "okay";
	pinctrl-0 = <&pinmux_lpadc0>;
	pinctrl-names = "default";
};

&blue_led {
	status = "okay";
};

&mrt0_channel0 {
	status = "okay";
};

&sai0 {
	status = "okay";
	pinctrl-0 = <&pinmux_sai0>;
	pinctrl-names = "default";
};

&sc_timer {
	status = "okay";
	pinctrl-0 = <&pinmux_sctimer>;
	pinctrl-names = "default";
};

&xspi0 {
	status = "okay";

	mx25um51345g: mx25um51345g@0 {
		compatible = "nxp,xspi-mx25um51345g";
		/* MX25UM51245G is 64MB, 512MBit flash part */
		size = <DT_SIZE_M(64 * 8)>;
		reg = <0>;
		spi-max-frequency = <200000000>;
		status = "okay";
		jedec-id = [c2 81 3a];
		erase-block-size = <4096>;
		write-block-size = <2>;
	};
};

zephyr_udc0: &usb0 {
	status = "okay";
	phy-handle = <&usbphy>;
};

&usbphy {
	status = "okay";
	tx-d-cal = <7>;
	tx-cal-45-dp-ohms = <6>;
	tx-cal-45-dm-ohms = <6>;
};

&wwdt0 {
	status = "okay";
};

p3t1755dp_ard_i2c_interface: &flexcomm8_lpi2c8 {};