Add coverity integration as a SCA variant. This is targetting the
service provided by blackduck to open-source projects available on
scan.coverity.com.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
when following the example it was not clear that BUILD_DIR needs to point
to application for sysbuild builds
Signed-off-by: Tobias Meyer <tobiuhg@gmail.com>
Arm Toolchain for Embedded (ATfE) is the next-generation Arm embedded
C/C++ compilation toolchain.
Arm Toolchain for Embedded is 100% open source. Arm is investing in the
LLVM linker and minor tools, and in the Picolib C library, to create a
performant 100% open source compilation toolchain for embedded
development with Arm-based designs.
The proprietary components used in Arm Compiler for Embedded 6 (the
linker, C library, and binutils carried over from the legacy Arm
Compiler 5 toolchain) are retired in favour of their open source
(LLVM and Picolib) equivalents.
Product page: https://developer.arm.com/Tools%20and%20Software/Arm%20Toolchain%20for%20Embedded
Github repo: https://github.com/arm/arm-toolchain
Signed-off-by: Alex Fabre <alex.fabre@rtone.fr>
This update changes the filename from 'arm_compiler.rst' to
'arm_compiler_6.rst' to accurately reflects its focus on AC6.
Recently, Arm introduced the Arm Toolchain for Embedded (ATfE), which is
distinct from AC6. This 7th generation compiler is entirely open source
for the first time. To distinguish it from AC6 and highlight it's a
complete toolchain rather than just a compiler, this new version will
be named Arm Toolchain for Embedded (ATfE).
Signed-off-by: Alex Fabre <alex.fabre@rtone.fr>
Windows powershell can by default not autocomplete known boards when
tapping which can cause frustration when you can't quite remember the
exact name or you don't want to type it out.
west build .\path\to\application\ -p -b stm<tab> will search for
available board including 'stm' in their name.
Signed-off-by: Tais Hjortshøj <tbh@mjolner.dk>
Extend the testcase schema to provide a way to communicate that a given
test is expected to reboot during execution. The generic harness takes
that information and suppresses `already STARTED` warnings if the
restart is expected.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Use runners.yaml from build metadata to gather info regarding board
supported runners, store the info in the board catalog, and allow
to display it as a table in a board's doc page using the
.. zephyr:board-supported-runner:: directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add a basic RFP runner that supports the `flash` command targettting
the Renesas Standard Boot Firmware.
Signed-off-by: Peter Johanson <peter@peterjohanson.com>
Update the quarantine section in the twister.rst documentation
to include information about excluding specific platforms,
architectures, and simulators
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Winget has become the standard Windows package manager, and it already
contains all the packages required for Zephyr development. Switch to it
from Chocolatey for simplicity and consistency with the OS.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Adds zephyr:board and zephyr:board-supported-hw directives to the
Arduino docs in order to generate more of the boards' documentation
automatically.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Seemed to be a typo in the Rust doc page saying to enable CMake support
in your CMakeLists.txt. Swapped to say Rust.
Signed-off-by: Michael Feist <michael.feist@etcconnect.com>
This commit brings support for additional GCC static analyzer options
with 'GCC_SCA_OPTS=...'
Linked to discussion on 'ccache' side effect on analyzer file
generation[1]
[1] https://github.com/zephyrproject-rtos/zephyr/discussions/86196
Signed-off-by: Alex Fabre <alex.fabre@rtone.fr>
Document this command's existence, provide basic usage, and describe
the locations of resources where additional help etc. should be found.
Signed-off-by: Martí Bolívar <marti.bolivar@oss.qualcomm.com>
Activating the Python environment on Windows can be done in a regular
command line prompt, or in powershell. But the activation script is
different.
Add a code tabs to include the powershell alternative.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Start a simple set of documentation on using Rust within Zephyr. This
gives an overview of how to use Rust, and pointers to the generated API
documentation.
Signed-off-by: David Brown <david.brown@linaro.org>
Perl is required for check_compliance.py/checkpatch.pl, and needs to be
installed in Windows to run these scripts.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Add an entry to the commands to run for "Keeping Zephyr Updated" as
python packages might have been updated/added as dependencies.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Allow user to add shell commands in testcase/sample yaml file
alongside the harness_config like in the console harness.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
The BLE acronym is not an official description of Bluetooth
LE, and the Bluetooth SIG only ever refers to it as Bluetooth
Low Energy or Bluetooth LE, so Zephyr should as well.
This commit does not change any board or vendor specific
documentation, and the term BLE may still be used in those.
It will be up to the vendors to update it if they want,
since many of them are using the term BLE in their
products.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The way the instructions were formulated, it was possible for someone to
get the impression that only a specific name of the workspace is allowable.
Clarify that the name and location can be freely chosen.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Add an example of using Twister for an 'out-of-tree' application's
code coverage report generation with `--coverage-basedir` option,
and a note about `gcovr` tool possible problems with symlinks.
Fixes: #83764
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
It's a design decision that the west workspace "topdir"
(that is, the top level directory containing the .west directory), is
not itself a git repository. This exists to give us some breathing
room to make changes to the workspace which would otherwise
potentially cause breakage if the entire workspace is in .git.
While this has always been the case, I'm documenting this now because
I reviewed a PR today that flipped my bit from "this is a question to
answer on a case by case basis" to "this is a frequently enough asked
question that I want to be able to link people to the answer":
https://github.com/zephyrproject-rtos/zephyr/pull/84305
We can debate the wisdom of this design decision (and, informally,
I've always tried to avoid breaking these setups), but IMO it's too
late to try to change this in west. Make it explicit in the docs that
you're on your own if you try this.
Signed-off-by: Martí Bolívar <marti.bolivar@oss.qualcomm.com>
Extend Twister Harness 'recording' feature to allow multiple
regular expression patterns to extract different types of records
from test output.
Add 'merge' recording mode to collect all extracted data fields
into a single record object of the test instance.
Export to CSV file now takes all field names occurred in the collected
records, sort it alphabetically, and then use it for columns instead of
using only the first record's fields. This is done to address possible
situation when records have different set of fields.
Adjust Twister documentation and test suite to the above changes.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Add an example for the `runners` section in the zephyr/module.yml file,
and a paragraph to the west "flash and debug runners" section.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add the cmake files for running static code analysis with the Polyspace
tools in the west build. The analysis leverages the compilation database.
Options for the analysis are documented in doc/develop/sca/polyspace.rst.
Analysis results are printed as command line output and provided as CSV.
Manually tested on v4.0.0 with various sample applications.
Signed-off-by: Martin Becker <mbecker@mathworks.com>
Instead of unconditionally erasing the whole target, add
support for using the common --erase flag.
Signed-off-by: Peter Johanson <peter@peterjohanson.com>
CLion now offers a more native approach to working with Zephyr projects.
We would like to inform users about this.
Signed-off-by: Oleg Zinovyev <oleg.zinovyev@jetbrains.com>
Extend `--no-detailed-test-id` command line option: in addition to its
current behavior to exclude from a test Suite name its configuration path
prefix, also don't prefix each Ztest Case name with its Scenario name.
For example: 'kernel.common.timing' Scenario name, the same Suite name,
and 'sleep.usleep' test Case (where 'sleep' is its Ztest suite name
and 'usleep' is Ztest test name.
This way both TestSuite and TestCase names follow the same principle
having no parent object name prefix.
There is no information loss in Twister reports with this naming:
TestSuite is a container object for its TestCases, whereas TestSuite
has its configuration path as a property.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Add documentation for the get_filtered_output method in both the Python
implementation and the Integration with pytest chapter. The method is used
to filter command outputs by removing prompts and log messages, making it
easier to process shell command results.
Signed-off-by: Thomas Günther <thomas.guenther@limatica.com>
removed traling whitespace
Anas Nashif
Chris Friedt
Mateusz Junkier
Arkadiusz Cholewinski
Benjamin Cabé
Tobias Meyer
Alex Fabre
Tais Hjortshøj
Jordan Yates
Peter Johanson
Grzegorz Chwierut
Carles Cufi
Michael Feist
Martí Bolívar
Jamie McCrae
Pieter De Gendt
David Brown
Butch Warns
Guillaume Gautier
Derek Snell
Robin Kastberg
Emil Gydesen
Grant Ramsay
Johan Hedberg
Dmitrii Golovanov
Stephanos Ioannidis
Martin Becker
Oleg Zinovyev
Thomas Günther