Add function to check if a property of a node
is equal to a passed string.
The motivation is that in current USB device support
the sizes of bulk endpoints are configured in Kconfig.
The information if a USB device controller supports
high-speed comes from devicetree. This information must be
mapped in controller driver Kconfig and corresponding options
in USB device stack configured must be adjusted.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This action replaces current buildkite workflow and uses github actions
to build and run tests in the zephyr tree using twister. The main
differences to current builtkite workflow:
- the action handles all 3 events: pull requests, push and schedule
- the action determines size of matrix (number of build hosts) based on
the change with a minimum of 1 builder. If more tests are built/run
due to changes to boards or tests/samples, the matrix size is
increased. This will avoid timeouts when running over capacity due to
board/test changes.
- We use ccache and store cache files on amazon S3 for more flexibility
- Results are collected per build host and merged in the final step and
failures are posted into github action check runs.
- It runs on more powerful instances that can handle more load.
Currently we have 10 build hosts per run (that can increase depending
on number of tests run) and can deliver results within 1 hour.
- the action can deal with non code changes and will not allocate more
than required to deal with changes to documentation and other files
that do not require running twister
The goal long-term is better integrate this workflow with other actions
and not run unncessarily if other workflows have failed, for example, if
commit message is bogus, we should stop at that check, to avoid wasting
resources given that the commit message will have to be fixed anyways
which would later trigger another run on the same code.
Currently there is 1 open issue with this action related to a github
workflow bug where the final results are not posted to the same workflow
and might appear under other workflows. Github is working on this bug.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not load empty files through the ELF parser and raise exception when
magic number of ELF is not matched.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add supported device information to the device `handles` array. This
enables API's to iterate over supported devices for power management
purposes.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Black Magic Probe supports a "monitor connect_srst" command [1] to
configure whether to assert reset when connecting to the target. This is
useful to reprogram a target that may be idling in a low power state,
with an otherwise unresponsive debug core.
Adding a --connect-srst runner option for enabling this for "flash" and
"debug" operations to ensure that programming works in that case, but
also explicitly disabling it for "attach", to allow attaching to a
running target without changing its state.
Not turning this on by default since apparently some MCUs disable the
SWD interface while in reset.
[1] https://github.com/blacksphere/blackmagic/wiki/Useful-GDB-commands
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
replace with version.parse from packaging module.
prevent this warning message:
DeprecationWarning: The distutils package is deprecated
and slated for removal in Python 3.12. Use setuptools or
check PEP 632 for potential alternatives
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Change the "yes/no" value to "true/false".
Otherwise pykwalify 1.8.0 will report below errors:
- Value: 'no' for required keyword must be a boolean:
Path: '/mapping/common'>
- Value: 'yes' for required keyword must be a boolean:
Path: '/mapping/sample/mapping/name'>
Signed-off-by: Shao Ming <ming.shao@intel.com>
Added a unit divisor option to the dt_node_int_prop_int and
dt_node_int_prop_hex functions to allow retrieval of DTS items as
a size value of K, M, or G divisor similar to the dt_node_reg_size_int
function.
Signed-off-by: David Leach <david.leach@nxp.com>
Removes hardcoded logic in the west signing script that translates
Zephyr board names to rimage target names. Instead, use a cached CMake
variable set at the board level to define its respective rimage target
name. This eliminates the need to modify the west signing script when
new SOF-supported boards are introduced to Zephyr.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
With `gen_handles.py` now running on the first pre-built image,
`zephyr_pre0.elf` there is no requirement for the device handle arrays
to remain the same size after processing.
Remove the padding generated in `gen_handles.py`, as well as the
temporary option `CONFIG_DEVICE_HANDLE_PADDING` which was added to work
around this issue.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This commit is motivated by the west discussion in:
https://github.com/zephyrproject-rtos/west/issues/548
The commit provides the ability to generate a build meta info file
containing lists of:
- Zephyr: path and revision
- Zephyr modules: name, path, and revision
- West: manifest path
path and revision for each project
For Zephyr or Zephyr modules the revision will be `null` if it is not
under git version control.
If Zephyr, a modules, or a project has uncommitted changes, the revision
will be marked dirty.
If west is not installed or used for the build process, the
west-projects list will be empty.
If a project is both a Zephyr module and a west project it will show up
in both lists.
Similar to Zephyr, which is independently referred as the Zephyr in use
but also listed as west project when west is used.
This is important in case ZEPHYR_BASE was manually set and pointing to
a different Zephyr repository.
The build meta file is not created per default but can be enabled with
the BUILD_OUTPUT_META Kconfig setting.
A project using west and having an extra Zephyr module loaded not
controlled using git can look like:
zephyr:
path: /.../zephyr
revision: 863600cd0e3c0a271e86629c5089821e5e4380cc-dirty
modules:
- name: mcuboot
path: /.../bootloader/mcuboot
revision: c61538748ead773ea75a551a7beee299228bdcaf
- name: local_module
path: /.../local_module
revision: null
west:
manifest: /.../zephyr/west.yml
projects:
- path: /.../zephyr
revision: 863600cd0e3c0a271e86629c5089821e5e4380cc-dirty
- path: /.../bootloader/mcuboot
revision: c61538748ead773ea75a551a7beee299228bdcaf
- path: /.../tools/net-tools
revision: f49bd1354616fae4093bf36e5eaee43c51a55127
And without west:
zephyr:
path: /.../zephyr
revision: 863600cd0e3c0a271e86629c5089821e5e4380cc-dirty
modules:
- name: hal_nordic
path: /.../modules/hal/nordic
revision: a6e5299041f152da5ae0ab17b2e44e088bb96d6d
west: null
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Many tests and CI activties are being missed by excluding tests
mistakingly when running twister.
This is visibile when you change one or more tests in kernel/ for
example, twister does not run those tests that have changed at all and
marking the PR as tested and ready to be merged.
Temporary fix for #40235.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixes the following error:
ERROR: Build directory "<whatever>" is for application "<symbolic source
dir in CMakeCache.txt>", but source directory "<resolved source dir>"
was specified; please clean it, use --pristine, or use --build-dir to
set another build directory
FATAL ERROR: refusing to proceed without --force due to above error
Fixes initial commit ab82264ace ("scripts: add west build, flash, and
debug commands")
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
As described in IEEE Std 1275-1994, the PCIe bindings uses the ranges
property to describe the PCI I/O and memory regions.
Write _RANGES_ defines that will be used to determines the I/O and
memory regions from PCIe Controller drivers.
Also exclude "ranges" & "dma-ranges" property's length generation
alogn "reg" and "interrupt".
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This adds some tests in test_edtlib.py and test.dts to check all
common possible combination of ranges property usage and handling
by edtlib.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
As described in IEEE Std 1275-1994, the PCIe bindings uses the ranges
property to describe the PCI I/O and memory regions.
Add parsing of this property in edtlib.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Add a few Bluetooth samples to track their footprint as part of the
effort to contain firmware bloat.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add GigaDevice ISP console flash runner. This tool enable uses ROM
bootloader to flash devices using serial port.
The GD32_ISP_Console tool can be found at
http://www.gd32mcu.com/download/down/document_id/175/path_type/1
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Fix few limitation which do not allow to run Twister on Windows OS.
Especially turn off "import pty" module, due to the fact, that this
module can be used only on POSIX OS.
Fixes#40007
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Check each line whether contains the correct pattern
${location}:${file} before splitting because it
turns out that script passes also compile
definitions added in project CMakeLists.txt such as:
add_compile_definitions(ABCD="XYZ")
which results in the build failure.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
As pylint says "Consider iterating the dictionary directly
instead of calling .keys()" don't use .keys() method.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Introduce a weak implementation of test_main() which calls:
* ztest_run_registered_test_suites(NULL);
* ztest_verify_all_registered_test_suites_ran();
This will attempt to run all registered test suites and verify that
they each ran.
Signed-off-by: Yuval Peress <peress@chromium.org>
Add new functionality to ztest to improve test modularity. The two
primary new entry points are:
* ztest_register_test_suite
* ztest_run_registered_test_suites
When registering a new test suite, users provide the name as well as
an optional predicate used to filter the tests for each run. Using NULL
as the predicate ensures that the test is run exactly once (after which
it is automatically filtered from future runs).
Calls to ztest_run_registered_test_suites take a state pointer as an
argument. This allows the the pragma functions to decide whether the
test should be run.
The biggest benefit of this system (other than the ability to filter
tests and maintain a larger test state) is the ability to better
modularize the test source code. Instead of all the various tests
having to coordinate and the main function having to know which tests
to run, each source file manages registering its own test
suite and handling the conditions for running the suite.
Signed-off-by: Yuval Peress <peress@chromium.org>
Add "ExitOnError 1" argument that treats any command-error
as fatal thus in the case of a programming error the "west flash"
command will return the correct error code instead of the default 0. It
fixes the false positive return codes when e.g we call west flash
command without a connected programmer or with the disconnected board.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Added check to respect the TRACING_SYSCALL tracing option
when generating syscall tracing overrides in
gen_syscalls.py.
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
Some architectures (e.g. RISC-V) has .sdata/.sbss section for small
data/bss. Memory partition should also manage the permission of these
sections in library so they should be put into app_smem.
(For example, newlib _impure_ptr is in .sdata section and
__malloc_top_pad is in .sbss section in RISC-V.)
Signed-off-by: Jim Shu <cwshu@andestech.com>
When generating syscall wrappers, call a tracing macro with the id,
name, and all parameters of the syscall as params when entering and
leaving the syscall. This can be disabled in certain call sites
by defining DISABLE_SYSCALL_TRACING which is useful for certain
tracing implementations which require syscalls themselves to work.
Notably some syscalls *cannot* be automatically traced this way and
headers where exclusions are set are in the gen_syscall.py as notracing.
Includes a systemview and test format implementation.
Tested with systemview, usb, and uart backends with the string
formatter using the tracing sample app.
Debugging the trace wrapper can be aided by setting the TRACE_DIAGNOSTIC
env var and rebuilding from scratch, a warning is issued for every
instance a syscall is traced.
Automatically generating a name mapping for SYSVIEW_Zephyr.txt is a
future item as is documenting how to capture and use the tracing data
generated.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This adds two new Kconfig settings.
The first setting `EXPERIMENTAL` which is a promptless symbol.
This symbol must be selected by any setting which is used to enable
an experimental feature.
The second setting is `WARN_EXPERIMENTAL` which is a user controlled
setting that configures the build system to print a warning when
experimental features are enabled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes a bug causing tests with error status get silently skipped
when --subset is used.
Fixes: #39619
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Always add the boards/<arch>/<board>/support directory to the OpenOCD
runner search path if the directory exists.
This simplifies using custom --config <partial-board.cfg> runner
arguments without having to use the full path to the cfg file.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Currently, west spdx --init uses os.mknod to create an empty file
to enable the Cmake file-based API system. As reported in #39311,
Python on Windows does not implement os.mknod.
This commit switches to using open()/close() instead of os.mknod()
to address this issue.
Signed-off-by: Steve Winslow <steve@swinslow.net>
For looking at statistics over time, it is helpful to be able to
quickly query the number of unique maintainers, collaborators,
areas, and the number of orphaned areas (without a maintainer).
This change adds the `count` subcommand to
`scripts/get_maintainer.py`.
```
% python3 ./scripts/get_maintainer.py count -h
usage: get_maintainer.py count [-h] [-a] [-c] [-n] [-o]
optional arguments:
-h, --help show this help message and exit
-a, --count-areas Count the number of areas
-c, --count-collaborators
Count the number of unique collaborators
-n, --count-maintainers
Count the number of unique maintainers
-o, --count-orphaned Count the number of orphaned areas
% python3 ./scripts/get_maintainer.py count
areas: 113
maintainers: 49
collaborators: 81
orphaned: 21
% python3 ./scripts/get_maintainer.py count -o
orphaned: 21
```
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
#38557 Reordered the argument for openocd, but we should not try
to call the init command before giving the board configuration
file stored in 'self.cfg_cmd'.
Move back this variable to it's original position.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Commits 49bcc08033 introduced
a possible None object 'gdb_init', do not try to iterate over
this variable if it is a None object.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Threads may wait on an event object such that any events posted to
that event object may wake a waiting thread if the posting satisfies
the waiting threads' event conditions.
The configuration option CONFIG_EVENTS is used to control the inclusion
of events in a system as their use increases the size of
'struct k_thread'.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Fixes#38046
Document the changes in twister.rst
Add baud rate to debug message in twister
Add baud parameter to twister's add_device function
Set the twister baud rate from input parameters
Use 115200 as the default baud rate if not specified
Add baud to the hwmap-schema.yaml file
Add --device-serial-baud to twister arguments
Fix compliance issues
Fix mistake in parameter name from device-baud to device-serial-baud
Refactoring of the code in orded to simplify the logic
and clear multiple definitions of the default baud rate.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Signed-off-by: Dennis Ruffer <daruffer@gmail.com>
Poll the flash status instead of just reading the flash status once. Add
support for controlling the number of SDO retries and the SDO timeouts.
These changes allows for greater control of the CANopen program
download, which is especially useful on noisy or congested CAN networks
and on devices with slower flash access.
Fixes: #39409
Signed-off-by: Klaus H. Sorensen <khso@vestas.com>
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Currently all the *-names and *-cells properties are derived from the
name of the base <name>s property. This is a limitation because:
- It forces the base property name to be plural ending in -s
- It doesn't allow the english exception of plural words ending in -es
With this patch we add one additional property 'specifier-space' that
can be used to explicitly specify the base property name.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Suggested-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
In order to allow for further options to be deprecated with minimal
impact, add a deprecation argparse Action and a callable instantiator
that can be used to deprecate options in favor of new ones.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Johann Fischer
Anas Nashif
Jordan Yates
Fabio Baltieri
Olof Johansson
Julien Massot
Shao Ming
David Leach
Maureen Helm
Torsten Rasmussen
Marc Herbert
Neil Armstrong
Carles Cufi
Gerson Fernando Budke
Piotr Golyzniak
Bartosz Bilas
Bartosz Bilas
Yuval Peress
Torbjörn Leksell
Jim Shu
Tom Burdick
Maciej Perkowski
Iuliana Prodan
Henrik Brix Andersen
Steve Winslow
Christopher Friedt
Peter Mitsis
Dennis Ruffer
Carlo Caione