Provided nodes reflect the clock tree of each series.
Clock nodes are disabled by default but populated with default
start up configuration. Main reason is the we don't want to
impact boards using Kconfig based clock configuration for now.
Exception to these rules:
- syslck: Default enabled, clock frequency and clock source not
provided
- pll: clock source not provided
This is made on purpose so that errors are triggered if parameters
essential to the board configuration are not provided.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Since there are times that we include a base .dtsi file and change the
reg address we tend to end up with warnings that the reg address and
unit-address don't match. To handle this introduce a simple DT_ADDR(x)
macro that will prepend '0x' to a 'unit-address' style address.
#define DCCM_ADDR 80000000 /* in unit-address format */
dccm0: dccm@DCCM_ADDR {
reg = <DT_ADDR(DCCM_ADDR) 0x1>;
...
};
This allows the dts file to override the value of DCCM_ADDR and than to
have the unit-address of the node and the reg address match.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove the common.dts file which has been used for a year.
common.dts at one point allowed us to conditionally add an MCUBoot
overlay based on Kconfig.
but since DT lost access to Kconfig options it has been unused.
The overridable variable DTS_COMMON_OVERLAYS, which by default points
to common.dts, is also unused in-tree, and any out-of-tree usage can
be ported over to use DTC_OVERLAY_FILE instead, so we remove the
variable as well.
This simplifies the configuration system.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This commit adds a flash driver implementation that writes to RAM and
exports statistics through stats.h. It can be used to simulate flash
memory for testing purposes.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
As we want to remove dts dependency on Kconfig, we had a case based on
CONFIG_BOOTLOADER_MCUBOOT. From a DTS point of view that was just
getting the chosen property 'zephyr,code-partition' set. We can easily
move this to the actual dts files and remove the mcuboot.overlay.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. This lets us
remove:
CONFIG_SOC_CC3220SF
CONFIG_SOC_MSP432P401R
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When the Kconfig BOOTLOADER_MCUBOOT is selected, an overlay to place the
image at the slot0 location is required. In order to avoid having to do
this manually for all samples when targetting MCUboot, include the logic
inside the dts.cmake script to prepend a new common.dts file that then
conditionally includes mcuboot.overlay.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Moved yaml files to be under dts/bindings and have the bindings try
and match the linux doc device tree binding dir structure as the
canonical binding reference.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
1. Use compatible "ns16550" to match upstream binding
2. Add reg-shift as optional property to binding yaml
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added flash-controller description and moved flash description to
it (for coherence). Added property for description of
the flash alignment required by write operations.
Thanks to that l-value FLASH_WRITE_BLOCK_SIZE macro
will be generated. It is useful for any component uses
the flash.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This patch fixes the size and address cells yaml generation. Due to
the leading #, the yaml generation incorrectly parses the property
name. Adding quotes around the property name fixes this.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Clarify that the clock-frequency is the bitrate at boot and introduce
defines that .dts files can use to set the clock-frequency.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adds common and Kinetis-specific pwm device tree properties, and updates
the k64 SoC and board dts files to include all four pwm nodes.
Jira: ZEP-2025
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Remove memory node from skeleton dtsi and add device_type
property in every memory node in soc dtsi files
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Adds common and Kinetis-specific adc device tree properties, and updates
all Kinetis SoC and board dts files to include adc nodes.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The I2C controller nodes are the root of the I2C bus for that controller
and thus may have children nodes that represent the I2C devices on that
controller. Thus we need to specify the #address-cell & #size-cell
properties.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds a YAML template file that describes the format of a
Zephyr device tree YAML specification.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add optional label property to be generated as part of the UART yaml
spec. This lets us use the label string in a device tree to generate
the device name (for example CONFIG_UART_STM32_PORT_1_NAME).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Devicetree.org specifies that serial devices property used to set
baud rate is "current-speed", while zephyr uses "baud-rate".
Align property name in order to keep zephyr dts files compatible
with device tree specification and could be re-used from/to
Linux for instance. We also cleanup a few SoCs that set "baud-rate" in
the SoC dts and not the board.
Jira: ZEP-2048
Change-Id: I097e7439ee46fe77c628b56531772950382fafcc
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rather than having a zephyr specific property we will encode the IRQ
priority as part of the interrupt property for ARM NVIC based interrupt
controllers.
Change-Id: I7d1489f0bffa7a6369f0622f748bb70dc83fa0cd
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds the base DTS and YAML files that may be referenced by
SoCs. The device tree files provide base definitions for the more well
known ARMV7M device nodes. These files are meant to be included in
SoC vendor specific device tree files.
The YAML files provide definitions for the contents of device tree node
that contain information that will be parsed and used for configuration
in the system.
DTS files define hardware and software configuration and YAML files
provide the markers for knowing which pieces need to be extracted.
Change-Id: I7e90fe19f09afb269b7b2988c2c19c0f26d7ee7c
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Erwan Gouriou
Kumar Gala
Sebastian Bøe
Kamil Piszczek
Anas Nashif
Marti Bolivar
Carles Cufi
Savinay Dharmappa
Andrzej Puzdrowski
Andy Gross
Maureen Helm
Yannis Damigos