The log2 prefix was deprecated and changed to log some time ago,
but log2_generic() seems to have been inadvertantly left with
the old prefix.
Rename log2_generic() to log_generic() to follow suit.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
UAC2 explicit feedback sample currently fails twister device testing
with timeout. It is not really clear what twister expects to see on the
serial output when running the sample. Because there is no meaningful
way of testing USB <-> I2S communication, mark the sample with TBD
harness to silence the timeout.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Define the reg and size property for the stm32 boards with qspi inside
Refer to the dts/bindings/flash_controller/st,stm32-ospi-nor.yaml.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The sample illustrates how to calculate feedback value based on I2S
sample clock measurement or indirect I2S FRAMESTART and USBD SOF.
The sample is currently only supported on nrf5340dk_nrf5340_cpuapp
target because the feedback measurement uses target specific
peripherals.
While it should be possible to perform feedback value calculation
entirely in software (possibly with some additional filtering due
to software scheduling jitter), the I2S API does not provide necessary
timestamps.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Introduce new USB Audio 2 implementation written from scratch. Main goal
behind new implementation was to perform entity configuration with
devicetree bindings, hiding the descriptor complexity from application.
Initial implementation is working at Full-Speed only. High-Speed support
will come later, but even at Full-Speed only this is viable replacement
for old stack USB Audio 1 class (USB Audio 1 is limited to Full-Speed by
specification, i.e. it is explicitly forbidden for USB Audio 1 device to
work at High-Speed).
Implemented is only absolute minimum set of features required for basic
implicit and explicit feedback samples. Only one sample frequency is
currently supported. Optional interrupt notifications are not supported.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add a test case for stm32h747i_disco that comes with a display shield.
This will make it easier to catch LVGL regressions on this board.
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
rpmsg_service only loads the main application on the target. Switch to
sysbuild which is know to work as expected with the openamp sample.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
This patch reworks the YAML files for the llext samples and tests to
share a common restriction list. Also, using an arch-specific config
to disable the MPU for the ARM architecture only, there is no need
to duplicate the test cases per architecture.
Use this to enable the "writable" test case for the ARM architecture
and separate the "modules_enabled" case to test building as a module.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Initializers must be compile time constants (not expressions!) for clang
to be happy. Clang rightfully pointed out that the callback_list member
of sensing_connection was being initialized using an expression that was
not compile-time constant.
The macros passed along a pointer created by taking the address of a
global constant and then at initialization time attempting to
dereference it using the * operator. So in the end the compiler has
identifier its trying to first take the address of and then later
dereference in an initializer. Clang didn't appreciate this, though gcc
seemed to be just fine.
Actually clang 17 might work just fine with this as well, but clang 16
(the clang I tried) didn't like it at all.
Instead store the pointer to the callback list rather than copying the
struct. This could be done the other way and not passing a
pointer through the macros perhaps.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Many sensors have multiple functions, for example, icm42688 supports
accel, gyro and temperature, and the sensor streaming api always mixes
the multiple functions in one function call. So we need add a layer in
sensing subsystem to dispatch the result returned from sensor streaming
api for each function.
I changed the sensor-type(int) to sensor-types(array) in sensing sensor
device bindings, so that one device can map to multiple instances of
sensing sensor.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
POSIX API Samples live in another directory, but they should
still be easy to find from Portability Samples.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The place where TF-M places its non-secure api header files has changed
Therefore changing it for for all applications that use it.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Enabling commands for the sample. They were disabled by c0c8952739 but
should be enabled in the sample.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Extend sample with configuration which has shell on one UART and
UART dictionary based frontend on another. Shell commands can be used
to control runtime filtering of logging messages for the frontend and
shell backend.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Change bin name to esp32_appcpu_firmware instead of
esp32_net_firmware to keep naming coherence.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
SOC_ESP32_NET is now SOC_ESP32_APPCPU, following espressif's
naming convention in the same manner as ESP32S3 app cpu.
SOC_ESP32_APPCU is now a subset of SOC_SERIES_ESP32.
This commit also changes the necessary files, samples and tests
for bisect purposes.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Physical boards work on these tests but some of the required
peripherals are not simulated by `renode`, executing the tests
with renode-simulated board in CI will fail.
Exclude `renode` simulation from these tests.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The incorrect semaphore was used for the ipc1 instance to synchronise
the data receiving.
This commit fixes it.
Signed-off-by: Marcin Jelinski <marcin.jelinski@nordicsemi.no>
Adjust the sample to work with the priority boost. It illustrates zbus
being used inside an ISR instead of into the main function.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
This change follow the recent commit that update openamp rsc table logs.
Add the logs for both samples sample client & TTY responder,
as well as for both sides Linux & Zephyr.
Remove the serial connection to Zephyr because it is board specific.
Signed-off-by: Marc-Antoine Riou <marc-antoine.riou@iot.bzh>
Add logs in both of the openamp rsc table loops to stick with
what is shown in Zephyr documentation. Prefix each message with the loop
name and unify logs with those from rpmsg_client_sample module.
Signed-off-by: Marc-Antoine Riou <marc-antoine.riou@iot.bzh>
Sample openamp_rsc_table was sending too many characters to master.
It was displayed as unrecognised character when reading message on master.
Signed-off-by: Marc-Antoine Riou <marc-antoine.riou@iot.bzh>
The sample did not correctly select the WinUSB
driver for the WebUSB interface as required
on Windows when CDC ACM was included in the
build configuration (the case for e.g. nRF52840
Dongle).
Introduce correct function subset header in the
MS OS 2.0 descriptor.
Signed-off-by: Lars Knudsen <larsgk@gmail.com>
Add DT overlay to be able to support and test UDC DWC2 driver
(snps,dwc2) on nucleo_f413zh board. This disables STM32 shim
driver described and configured on the SoC and board level.
Obviously,it should work with other STM32F4 boards as well and we
could have a mechanism to apply it generically using snippets.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add README.rst file with description of sample which shows how to use
pytest and Twister together.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Use the common USBD sample initialization helper where new USB device
support has already been added.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
There is common code for the new USB device support in the samples to
instantiate USB device, descriptors, configuration and initialize USB
device. Add common code that can be used for the simple usecase with a
single USB device and single configuration.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The benchmark sample did not contemplate message subscribers. It adds
the msg subscribers and improves the organization of the project.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
The subsys/logging/logger example can be used to demonstrate how to
use SWO for logging. Add a configuration fragment that enables the
logger's SWO backend. The default SWO frequency in this example is set
to 2 MHz to ensure a well-defined output bit rate instead of the
highest possible.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Enable INPUT_SHELL and INPUT_KBD_MATRIX_STATE by default if the sample
is compiled with CONFIG_SHELL=y. This makes it easier to use the shell
commands in the sample by just enabling the shell and let any help
command turn on automatically.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Update the readme to better describe contents of the sample, which is now
used to showcase the various input device types that LVGL offers.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Adds a zephyr,lvgl-keypad-input compatible to the native_posix board
overlay and the required code to control an button matrix widget.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Add a name for the Kconfig choice symbol
indicating the Zbus subscriber buffer allocation
and adjust the name of the existing choices.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Erwan Gouriou
Pieter De Gendt
Christopher Friedt
Jamie McCrae
Tomasz Moń
Francois Ramu
Joel Guittet
Abderrahmane Jarmouni
Martin Jäger
Wilfried Chauveau
Luca Burelli
Tom Burdick
Zhang Lixu
Guangfu Hu
Markus Swarowsky
Krzysztof Chruściński
Lucas Tamborrino
Yong Cong Sin
Marcin Jelinski
Rodrigo Peixoto
Marc-Antoine Riou
Lars Knudsen
Murlidhar Roy
Ryan Woodward
Johann Fischer
Piotr Golyzniak
Andreas Sandberg
Anas Nashif
Marcio Ribeiro
Arkadiusz Wadowski
Fabio Baltieri
Fabian Blatz
Hake Huang
Alberto Escolar Piedras
Bartosz Bilas