Add memory-region to nordic,nrf-spis binding. This commit aligns SPIS
shim to utilize memory-region property. This optional property enables
user to specify placement of dma buffers in memory region. It is done
by assigning to memory-region property, phandle to node with
zephyr,memory-region and mimo-sram compatible.
When memory-region property is not specified for given device, buffer
is placed in default RAM region with other data.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add an initial input driver for the PixArt PAT9125EL, just core
functionalities for now, will add more configuration properties at a
later stage.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This adds additional memory region property
to NFCT peripheral. This is not mandatory
property, it adds possibility to user to
specify memory region for DMA transfer.
If it is not set then data buffer is placed
in default RAM with other data.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
Signed-off-by: Dominik Chat <dominik.chat@nordicsemi.no>
This is a setting that depends on the board or application, so it should
not be part of SoC definition files.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This commit introduces a driver for ADC keys, a common circuit design where
keys are connected to an ADC input via a resistor ladder.
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Added a simple driver for RRAM. It is implemented as a flash driver,
because the "RRAM eFlash" macro obeys flash-like constraints.
Although users are not required to erase before write.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Add driver for ScioSense ENS160 multi-gas sensor. The driver includes
support for I2C and SPI, attributes for setting temperature and
humidity compensation and data ready trigger.
Also add ScioSense to the list of vendor prefixes.
Signed-off-by: Gustavo Silva <gustavograzs@gmail.com>
Add clarifications to mipi-dbi bindings to avoid the confusion
between two options, write-only and duplex.
Signed-off-by: Eve Redero <eve.redero@gmail.com>
Change reset pin polarity for MIPI DBI SPI controller, so that the board
devicetree is responsible for setting the GPIO to active low, and the
driver always sets the pin to a logic 1 to reset the display.
Fixes#68562
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Unlike SPI nodes, I2C nodes (i2c20, i2c21, i2c22 and i2c30) did not have
this required property.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Remove pinctrl from device tree since it is not required
when internal oscillator is used.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Add FlexSPI clock source to RT1010 devicetree definition for FlexSPI
node, to match FlexSPI clock source defined on standard FlexSPI dt node
that is removed in the RT1010 devicetree.
Fixes#68488
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Display is not working on STM32F429i-DISC1 board because
display_blanking_off() needs to be sent to ILI9341 device, but it's sent
to LTDC instead which does not implement it.
This patch adds a LTDC DT property that provides the pHandle of the
display's own controller so that display_blanking_off/on are forwarded to
it when they are called by an application.
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
... so that there is no need to include that header individually
for every added board based on an nRF SoC.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add definition of the nRF54H20 SoC revision EngA with its Application,
Radio, and Peripheral Processor (PPR) cores and basic peripherals:
GRTC, GPIOs, GPIOTE, and UARTs.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add a set of bindings that will be used in the nRF54H20 SoC definition.
Extend the existing GPIOTE binding with properties needed for this SoC.
Also do a tiny clean-up in the bindings added recently for nRF54L15
(HFXO and LFXO).
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
... so that it can be included by ARM and RISC-V cores. For the same
reason, SysTick can no longer be disabled in this common file.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This adds new NXP mailbox driver for MBOX device.
NXP mailbox IP driver supports sending data between cores.
It uses 32 bit register to trigger irq to other core.
This driver implementation uses 4 bits for channel selection of
triggering mode, 4 bits for channel selection of data transfer and
rest 24 bits for data.
NXP mailbox IP Reference Manual UM11126, Chapter 52.
https://www.nxp.com/webapp/Download?colCode=UM11126
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
Address and size are given by the DTS register property
of the qspi nor. The size Property becomes useless.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Address and size are given by the DTS register property
of the ospi nor. The size Property becomes useless
Signed-off-by: Francois Ramu <francois.ramu@st.com>
1. Configure 'core-clock' to 192MHz to generate necessary 48MHz
2. Support workaround to disallowing ISO IN/OUT EPs to be assigned
the same EP numbers
Signed-off-by: Chun-Chieh Li <ccli8@nuvoton.com>
drivers: eth: phy: tja1103: Handle link change
These changes enable -
TJA1103 driver to gracefully handle Link connect or disconnect events
between Ethernet PHY and its link partner and notify it to the
upper network layers
Signed-off-by: Sumit Batra <sumit.batra@nxp.com>
Erwan Gouriou
Krzysztof Chruściński
Henrik Brix Andersen
Fabio Baltieri
Kamil Gawor
Samuel Kleiser
Ricardo Rivera-Matos
Mustafa Abdullah Kus
Yuval Peress
Gerard Marull-Paretas
Chen Xingyu
Mykola Kvach
Jakub Zymelka
Gustavo Silva
Eve Redero
Daniel DeGrasse
Jose Alberto Meza
Juliane Schulze
Joel Guittet
Abderrahmane Jarmouni
Andrzej Głąbek
Grzegorz Swiderski
Tomas Galbicka
Linus Isberg Martinsson
Francois Ramu
Manuel Argüelles
Chun-Chieh Li
Sumit Batra