40k heap size is not enough and results in handshake errors:
<err> net_sock_tls: TLS handshake error: -0x2700
Increasing it to 55k already works (when used with native_sim_64 and
offloaded sockets), but use 60k to get a bit more room for future.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This update the echo_client configurations for the atsamr21_xpro board
to match same configs defined at echo_server.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
In the Zephyr v3.5 to build the net samples pair echo-server/client the
SRAM requirements increased for the atsamr21_xpro board when passing
-DEXTRA_CONF_FILE=overlay-802154.conf argument. This adjusts example
features to free necessary SRAM to build and run the example.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Convert the network log backend to use socket API instead of
net_context API. This allows the backend to be used also
with socket offloading network drivers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Clarify some documentation regarding DTLS settings.
Set default QUEUE uptime to 30s, which would be same as
most cellular networks use, and nRF SDK use.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Relocate network stack to RAM for iMX RT boards when running the zperf
sample. Relocating the network stack to ITCM greatly improves
performance on these platforms.
Also, remove overlays for the RT1050 and RT1060 setting the system timer
to systick. This is no longer required as this is the default timer for
these boards.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enable relocation of key networking stack functions to RAM when running
the zperf example. This will enable better performance on platforms with
fast code RAM.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Decrease total RAM usage when Wi-Fi is enabled, specially after
`config HEAP_MEM_POOL_ADD_SIZE_BOARD` was added. This allows application
to handle additional HEAP as required.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
A growing number of CAN controllers do not have support for individual RX
hardware filters based on the Remote Transmission Request (RTR) bit. This
leads to various work-arounds on the driver level mixing hardware and
software filtering.
As the use of RTR frames is discouraged by CAN in Automation (CiA) - and
not even supported by newer standards, e.g. CAN FD - this often leads to
unnecessary overhead, added complexity, and worst-case to non-portable
behavior between various CAN controller drivers.
Instead, move to a simpler approach where the ability to accept/reject RTR
frames is globally configured via Kconfig. By default, all incoming RTR
frames are rejected at the driver level, a setting which can be supported
in hardware by most in-tree CAN controllers drivers.
Legacy applications or protocol implementations, where RTR reception is
required, can now select CONFIG_CAN_ACCEPT_RTR to accept incoming RTR
frames matching added CAN filters. These applications or protocols will
need to distinguish between RTR and data frames in their respective CAN RX
frame handling routines.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
If accept() returns an error, it typically means that the
system is running out of resources. In this case sleep
some time in order the system to cool down a bit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If accept() returns an error, it typically means that the
system is running out of resources. In this case sleep
some time in order the system to cool down a bit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow engine to give hints about ongoing CoAP transmissions.
This information can be used to control various power saving
modes for network interfaces. For example cellular networks might
support release assist indicator.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Update coap_service_send and coap_resource_send to take an optional
pointer argument to the newly introduced coap_transmission_parameters.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The conf and overlay files to properly compile the wifi samples were
omitted for the Xiao_esp32c3 board. I've added those two files and
confirmed that the sample properly compiles and runs.
Signed-off-by: Robert Baruch <robertbaruch@mac.com>
In preparation of migrating to net_mgmt events, we need to remove
the observer event callback handler.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
If server registration fails, allow fallback to secondary server,
or fallback to bootstrap.
Also allow fallback to different bootstrap server.
Add API to tell RD client when server have been disabled by
executable command.
Changes to RD state machine:
* All retry logic should be handled in NETWORK_ERROR state.
* New state SERVER_DISABLED.
* Internally disable servers that reject registration
* Temporary disable server on network error.
* Clean up all "disable timers" on start.
* Select server first, then find security object for it.
* State functions return void, error handling is done using states.
* DISCONNECT event will only come when client is requested to stop.
* NETWORK_ERROR will stop engine. This is generic error for all kinds
of registration or network failures.
* BOOTSTRAP_REG_FAILURE also stops engine. This is fatal, and we cannot
recover.
Refactoring:
* Server selection logic is inside server object.
* sm_handle_timeout_state() does not require msg parameter. Unused.
* When bootstrap fail, we should NOT back off to registration.
This is a fatal error, and it stops the engine and informs application.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
in ip_k66f platfrom, we using rtt as debug port,
which is conflicted with usermode. see below:
warning: LOG_PRINTK
(defined at subsys/logging/Kconfig.processing:8)
has direct dependencies !USERSPACE && !LOG_MODE_MINIMAL
&& LOG with value n, but is currently being y-selected
by the following symbols:
- LOG_BACKEND_RTT_FORCE_PRINTK
(defined at subsys/logging/backends/Kconfig.rtt:103),
with value y, direct dependencies LOG_BACKEND_RTT &&
!LOG_FRONTEND_ONLY && !LOG_MODE_MINIMAL && LOG (value: y),
and select condition LOG_BACKEND_RTT &&
!LOG_FRONTEND_ONLY && !LOG_MODE_MINIMAL && LOG (value: y)
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Using Connection Manager, it's easy to run lwm2m sample on
devices supporting different connectivity technologies
(for example, Wi-Fi and LTE).
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Add virtual LAN support to the sample so that it is easier to
test the multiple mDNS listener feature implemented in previous
commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
DTLS Connection Identifier support requires DTLS stack
that supports it. MbedTLS support in Zephyr is already
ported in, also some offloaded sockets support it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
For several samples that today have native_sim
enabled, enable them also for native_sim.
And set native_sim as default integration_platform
instead of native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Enable native_sim in the sample yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Enable native_sim in the sample yaml, and switch
integration_platform
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide overlays for native_sim
* Enable native_sim in the sample yaml
* Remove native_posix from the sample yaml platform_allow as it was
filtered out by the host libC
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide overlays for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc and shell script,
replace native_posix references with native_sim
* Provide overlays for native_sim(_64)
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's replace the references to native_posix with native_sim.
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Rename
Networking with native_posix
to
Networking with native_sim
replace all links to this page accordingly
and replace its references to native_posix with native_sim.
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide an overlay for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* In the sample doc, replace native_posix references with native_sim
* Provide an overlay for native_sim
* Enable native_sim in the test yaml
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
When connection manager (CONFIG_NET_CONNECTION_MANAGER) is disabled,
application starts right away. Scenario that it covers is when static
networking is used, like with emulators (QEMU, Native Sim, ...).
Since 'connected' flag was not set in such scenario, the internal loop
inside start_client() has ended up early and stop_udp_and_tcp() was called
quickly after starting TCP and UDP clients.
Set 'connected = true', when connection manager is disabled, so that it is
assumed that connection is working for the whole duration of the
echo-client sample.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Added initial version of Infineon AIROC WIFI driver
Added initial version of binding file for Infineon AIROC WIFI
driver
Rename CONFIG_ABSTRACTION_RTOS_COMPONENT_ZEPHYR to
CONFIG_USE_INFINEON_ABSTRACTION_RTOS
Exclude cy8cproto_062_4343w platform from
drivers.modem.esp_at.build test
Change revision hal_infineon to
69c883d3bd9fac8a18dd8384624b8c472a68d06f
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
* Add support for running interoperability tests with
Qemu X86.
* Remove some debugging messages to allow binary to
fix Qemu Cortex-M3 board.
* Tune buffer and stack sizes to fit all boards.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Instead of forcing use of NEWLIB_LIBC, select any available complete C
library implementation. Add CONFIG_REQUIRES_FLOAT_PRINTF and adjust
CONFIG_LIBC_MALLOC_ARENA_SIZE as needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
The sample enables CONFIG_NET_IPV4_MAPPING_TO_IPV6 and then
turns off IPV6_V6ONLY option which allows it to support both
IPv6 and IPv4 using the same socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix the west invokation. "-t" is added automatically
to the run goal, otherwise we get a "-t -t" command.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Juha Ylinen
Marcin Niestroj
Karthikeyan Krishnasamy
Gerson Fernando Budke
Jukka Rissanen
Seppo Takalo
Daniel DeGrasse
Declan Snyder
Sylvio Alves
Henrik Brix Andersen
Andriy Gelman
Pieter De Gendt
Lucas Denefle
Robert Baruch
Hake Huang
Alberto Escolar Piedras
Nazar Palamar
Anas Nashif
Benedikt Schmidt
Keith Packard