Instead of using 32 bit enum values for event numbers, convert
the code to use 64 bit long bit fields. This means that the
user API is changed to use 64 bit event values instead of 32
bit event values.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In the previous code, strnlen could have returned WIFI_SSID_MAX_LEN, and
the following statement ensuring NUL termination would have written one
past the end of the array.
Replace this with code that ensures a NUL termination within the bounds
of the array and then use strlen to compute the length.
Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes the check for connected interface if CONFIG_ESP32_WIFI_AP_STA_MODE=y
(different data objects for STA (esp32_data) and AP (esp32_ap_sta_data)).
As the correct data object is linked to device object, we can check for
ESP32_STA_CONNECTED or ESP32_AP_CONNECTED in dev->data.
This fixes AP mode in samples/net/wifi/apsta_mode if STA WIFI_SSID/WIFI_PSK
are invalid and no STA connection can be established before
(samples/net/wifi/apsta_mode/src/main.c#L28-L29) for all ESP32 derivates.
Fixes false check from 183b74c558
Signed-off-by: Gregor Copoix <gregor.copoix@ithinx.io>
Make sure send event returns error when device is not connected
into STA or have AP mode in place.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Wi-Fi AP-STA mode fails on ESP32 due to incorrect interface
initialization. In AP-STA mode, esp32_wifi_init first sets the driver's AP
interface, followed by the STA interface. However, the driver initializes
them in reverse order, causing both to read incorrect device data and
resulting in a "Wi-Fi not in station mode" error.
This fix handles STA and AP initialization in separate functions and
checks for correct mode in esp32_wifi_status.
Tested on a custom ESP32-S3-WROOM-1-N4R2 board, where both STA and AP
can connect, send, and receive data.
Signed-off-by: Oskari Seppä <seppaoskari@gmail.com>
Update and enable Wi-Fi/Bluetooth software coexistence management.
This improves package handling and is recommended to be used
in high traffic scenarios.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Remove ESP heap from the sources. System heap is default heap.
Use heap adapter layer to configure used heap.
Use MEM_POOL memory request config to Wi-Fi and Bluetooth drivers.
Update the Wi-Fi and BLE memory needs.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
The station-mode channel scan method is currently set to WIFI_FAST_SCAN
which ignores the signal strength and connects to the first channel found
which may result in poor WiFi bandwidth.
Change the scan mode to scan all channels and connect to the channel with
the highest RSSI.
Fixes#84488
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
Convert vendor specific **_WIFI_BUILD_ONLY_MODE symbol as global
in order to provide common build flag to enable CI with no blobs.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This commit aims to improve the integration of `esp_wifi_drv` by
providing the link mode information to `wifi_mgmt` when a station device
is connected to the AP.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
As long as MBEDTLS_ENTROPY_C is enabled, Mbed TLS needs to
poll some entropy source to gather data that will then be
processed by CTR/HMAC-DRBG modules. This means that in most
of the cases, once MBEDTLS_ENTROPY_C is enabled then also
MBEDTLS_ENTROPY_POLL_ZEPHYR needs to be enabled. This was
done manually until now, as the long list of samples/tests
demonstrate.
This commit solves this dependency by defaulting
MBEDTLS_ENTROPY_POLL_ZEPHYR to on as soon as
MBEDTLS_ENTROPY_C is set. As a consequence, all manual
enablement of MBEDTLS_ENTROPY_POLL_ZEPHYR in samples/tests
are removed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Make sure all kconfig related to Wi-Fi is
in its driver area.
This commit also removes esp_timer_init() call
from Wi-Fi driver.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This commit applies several changes in the way "heap_runtime"
feature is used. It can't be split due to bisectability issues.
Whenever the feature is enabled, a new heap is created and
custom malloc/calloc/free functions are added into the build
system. Those functions are currently used for internal Wi-Fi and BLE
drivers only.
Such changes are described below:
1) Rename heap.c to esp_heap_runtime.c for better readability.
2) Rename RUNTIME_HEAP to HEAP_RUNTIME to make it similar to what is
available in Zephyr.
3) Add runtime heap to BT as such as Wi-Fi.
Fixes#79490Fixes#79470
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Update both Wi-FI and BLE init codes to return proper
error code and logging when it is missing heap.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Checks blobs presence as dependency to allow driver build.
Goal is to avoid building in environment where blobs won't
be present (e.g GitHub CI environment).
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
There is a regression caused by #76177, which
causes build to fail due to missing includes and others.
This wraps it with proper checks and fixes wifi scan call.
This also remove unused variable present in the same driver.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Remove all entries that as not being used.
This also update hal to re-enable warning flags
as such as -Wno-unused-variable.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The ESP32 Wi-Fi driver previously did not support APSTA mode,
enabling AP mode would disable STA mode and vice versa.
Support for APSTA has been added by introducing additional
network interface: one for STA (Interface 2) and one for
AP (Interface 1). The CONFIG_ESP32_WIFI_AP_STA_MODE option in
Kconfig now allows enabling or disabling this support.
Signed-off-by: Muhammad Haziq <muhammad.haziq@zintechnologies.com>
- Slightly improve the name of this kconfig adding the suffix
_POLL in order to highlight that this adds a callback
function used to poll data.
- Description was also updated to point out that this symbols
might not only use the (secure) entropy driver, but also
generic number generators, some of which are not really
secure.
- The symbol was move from Kconfig to Kconfig.tls-generic because
this is where MBEDTLS_ENTROPY_C is located and since
MBEDTLS_ENTROPY_HARDWARE_ALT depends on the former (it only
makes sense if the entropy module is also enabled), we add
also the "depends on".
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Updated `link_mode` assignment to reflect the actual negotiated PHY mode
by using `esp_wifi_sta_get_negotiated_phymode`.
Since `ap_info.phy_11b` ... `ap_info.phy_11ax` represent the access point
capabilities and not the actual current link mode.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
In case where the system is overloaded, net stack buffer
could fail to allocate next packet. That scenario requires
wifi internal Wi-Fi driver to free current rx buffer. This is
currently not being called. This fixes it by making sure
esp_wifi_internal_free_rx_buffer() is called in all scenarios.
Fixes#63043
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Remove the `_MAC` part because those Kconfig options enable only hash
algorithms, nothing MAC-related, and the `_ENABLED` part to align the
naming to the Mbed TLS defines (plus we don't need such a part).
As a bonus, enabling SHA-256 does not automatically enable SHA-224
anymore.
See the migration guide entries for more details on the practical
changes.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
In #72651, build fails due to conflict when enabling mbedTLS components.
Current Wi-Fi implementation for ESP32 can discard those selected cryptos.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Bind WiFi network devices to the generic WiFi connectivity backend if
the appropriate option is set.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This driver doesn't use any APIs outside of the Zephyr C library list, so
it doesn't need this _POSIX_C_SOURCE define.
Signed-off-by: Keith Packard <keithp@keithp.com>
Automatic Wi-Fi station reconnection is forced even when
application requests disconnection. This PR adds a check
in the disconnection event reason to decide whether or not
perform the reconnection.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Mute the function declaration warning, the compiler was emitting when
compiling the esp32 Wi-Fi driver with IPv4 disabled. The
net_dhcpv4_start() function was visible during compile time, even when
IPv4 was disabled.
Signed-off-by: Marc Lasch <mlasch@mailbox.org>
when ap mode is enable,
we don't enable iface by `net_eth_carrier_on` before,
this will cause wifi tx error.
this patch fix this issues.
Signed-off-by: YuLong Yao <feilongphone@gmail.com>
When channel set to WIFI_CHANNEL_ANY, ap will not work.
This patch choose channel 0 when channel is WIFI_CHANNEL_ANY.
Signed-off-by: YuLong Yao <feilongphone@gmail.com>
When testing Wi-Fi with MQTT/HTTP/Socket features,
network stacks can be full very fast, causing network issues
and eventual crash.
By analyzing used stacks,increasing the stack size described
in this PR fixes most use cases related above.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Decouple interface and Wi-Fi APIs, Wi-Fi APIs are common independent of
Wi-Fi offload or implemented natively (This is preparation for
introducing Native Wi-Fi).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Default scan mode is Active. User can force the scan mode to passive
through Kconfig option or using 'passive' option from shell.
Using either of this option will override regulatory settings and
forces all scan channels to be passive only.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Identify the Wi-Fi capability to the networking stack and also the type
of Wi-Fi (Native vs Offloaded), this helps identifying Wi-Fi interfaces
that can be used by applications.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Move esp_wifi_internal_reg_rxcb() after esp_wifi_init(), so that
wifi_connect() is successful.
Fixes: 690f65dbd9 ("drivers: wifi: esp32: fix possible interface null
pointer")
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
esp32_wifi_dev_init() currently starts Wi-Fi stack before
the interface is properly configured, which happens in function
esp32_wifi_init(). This can trigger a ESP32_WIFI_EVENT_STA_START event
before interface initialization, causing a crash.
Moving esp_wifi_start() to esp32_wifi_init() will guarantee that
this won't happen.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Marek Matej
Jukka Rissanen
Keith Packard
Jordan Yates
Gregor Copoix
Sylvio Alves
Oskari Seppä
Eric Holmberg
Pisit Sawangvonganan
Valerio Setti
James Roy
Marcio Ribeiro
Raffael Rostagno
Muhammad Haziq
barry batsbak
Tomi Fontanilles
Lucas Tamborrino
Jordan Yates
Marc Lasch
Benedikt Schmidt
YuLong Yao
Chaitanya Tata
Ajay Parida
Marcin Niestroj