Add here as an example that support setting customized TX power limit
file to override the default one.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
fix issue with (no paths) != sum(<no paths>)
In some cases it was observed that item were being
added to the node_no_paths and these only had a
path of ':' hence no node was ever added.
This resulted in the size of (no paths) to not be
equal to the sum of it's children.
I am not sure if this size should be a child named
of no paths or if this should be part of the
node_hidden_syms. I assumed it should be part
of node_hidden_syms
Signed-off-by: Kyle Micallef Bonnici <kylebonnici@hotmail.com>
In twister coverage runs we create the gcov sym link to llvm-cov
executable. This code runs multiple times which causes errors with the
current implementation since creating the symlink will fail; then
copying will also fail because we're using the symlink (self copy the
file).
Add a helper function to `try_making_symlink` which will handle the
following cases:
1. If the symlink already exists and is correct, do nothing.
2. If the symlink exists but points to the wrong file, replace it.
3. If the symlink doesn't exist create it.
4. If creating a symlink fails, just copy the file.
Signed-off-by: Yuval Peress <peress@google.com>
The hw feature generation takes a long time. The HW_FEATURES_TURBO_MODE
option completely disables hw feature generation. Add a new option
HW_FEATURES_VENDOR_FILTER to be able to selectively enable hw feature
generation only for a given list of vendors. This option is useful
when working on board documentation pages.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
To improve code clarity, use `shell_print` in place of `shell_fprintf`
with `SHELL_NORMAL` where appropriate.
For partial-line outputs, use `shell_fprintf_normal` to preserve output
formatting.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Make `sensor_channel_name` and `sensor_attribute_name arrays` to use
`const char *const`. This ensures full immutability of the tables,
placing them entirely in the `.rodata` section and reducing usage
of the `.data` segment.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Aligned the `struct shell *` argument name from `shell_ptr` to `sh`
for consistency with other drivers' usage of `sh`, and to match
the `shell_cmd_handler` argument name.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Aligned the `struct shell *` argument name from `shell_ptr` to `sh`
for consistency with other drivers' usage of `sh`, and to match
the `shell_cmd_handler` argument name.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
For some reasons, xt-clang does not like "%hhd" or "%hd"
(for example) being fed int data (same goes for unsigned ones)
and will always complain about mismatched types. GCC and newer
LLVM/Clang do not complain. This could be due to xt-clang
being based on older LLVM/Clang. So skip the check.
Fixes: #89008
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Declare the dts and binding files used for the supported hardware
directive as dependencies of doc pages that use them.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The script zephyr/scripts/kconfig/kconfigfunctions.py used by
Kconfig's "shields_list_contains" searches shield names in lower-case,
like they are passed through the SHIELD in CMake, --shield argument
in west. Make the mt9m114 shield upper-case. This has no effect currently
as this Kconfig entry is not used anywhere in Zephyr.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Add FRDM-MCXN947 to the video capture sample documentation and twister
YAML configuration, using the DVP OV7670 camera module newly introduced.
Signed-off-by: Josuah Demangeon <me@josuah.net>
The OV7670 was defined as part of the FRDM-MCXN947 board attached to the
SmartDMA and I2C peripheral. Migrate the devicetree to a reusable shield
that can be swapped with other image sensors.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Add the 20-pin camera connector used by at least Arducam, Waveshare,
Olimex, Arduino, NXP, ST, Adafruit that connects image sensor module
boards and devkits.
Signed-off-by: Josuah Demangeon <me@josuah.net>
The PWDWN_CTLx have been adjusted to support for NPCK chips. This
commit updates powe-down control initialization for NPCXN and NPCKN chips.
Signed-off-by: Tom Chang <CHChang19@nuvoton.com>
This patch modifies the DTS files for Intel ADSP ACE 3.0 platforms,
ensuring the power-states node is a child of the cpus node. This change
aligns with Linux conventions and mirrors the adjustments made in commit
e4c43e4cc9 for other platforms.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Fix Central CIS offset calculation for dissimilar ACL and
ISO intervals in use.
Mayfly execution of `mfy_cig_offset_get()` could be after
"LLL Prepare" or before depending on whether a previous radio
event is being preempted or not, respectively; the
`conn->lll.event_counter` may not be pre-incremented.
This race condition is fixed by the fact that we use a
constant instant delta value now.
Dissimilar ACL and ISO intervals may lead to ACL overlapping
or be too close to ISO event, causing preemption; under this
case ACLs "LLL Prepare" would run after `mfy_cig_offset_get`
causing incorrect calculation of CIS offset without the fix.
Remove redundant `instant` member in `ll_conn_iso_stream`
structure as a constant CIS Create instant delta is now
used.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for using the diag0 pin as an interrupt source. This
allows event detection via diag0 interrupts instead of polling rampstat.
The driver now:
- Configures diag0 when the GPIO is available
- Sets up GPIO interrupt handling for rising edge transitions for
rampstat reading
- Falls back to polling only when diag0 is not available
Signed-off-by: Dipak Shetty <shetty.dipak@gmx.com>
Simplified by removing redundant options and
enabled automatic fallback to ramp status polling when
diag0 pin is unavailable for event detection.
Signed-off-by: Dipak Shetty <shetty.dipak@gmx.com>
This diag0-gpios property allows configuring the diag0 diagnostic pin,
which can be used to indicate position reached, stall detection, and
other status information from the controller.
Signed-off-by: Dipak Shetty <shetty.dipak@gmx.com>
This fixes several ways to hang the driver, such as:
- typing too fast
- going over the read buffer capacity
- pasting anything
- using arrow keys (sending 2 chars at once)
etc
Signed-off-by: Camille BAUD <mail@massdriver.space>
Replace `CONFIG_NET_L2_IEEE802154` with `CONFIG_NET_L2_PHY_IEEE802154`
as `NET_LINK_ADDR_MAX_LENGTH` should be set to `8` for all IEEE 802.15.4
based L2, e.g. OpenThread.
Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no>
Change the base address of GPIO and pinctrl voltage selection
The new base address enables more pins to support voltage selection.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
When the supplied server address is already an
ip address, CONFIG_DNS_RESOLVER is not required,
as zsock_getaddrinfo() can resolve literal addresses
without it.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
The commit `1f73ca3` clarified that a scan time of 0 should be used to
apply the default scan timeout, as opposed to using
SL_WIFI_DEFAULT_ACTIVE_CHANNEL_SCAN_TIME, which incorrectly results in
a 65-second timeout.
However, this fix was unintentionally omitted in commit `bf22b61`
when the `sl_si91x_configure_timeout()` function was relocated.
This commit restores the behavior.
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Implemented logic to detect changes in key Wi-Fi parameters (SSID, PSK,
security, channel) and disable the interface accordingly. For STA mode,
the driver disconnects before reconnecting with updated parameters. For
AP mode, it disables and re-enables the AP if changes are detected.
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Relocate the functions siwx91x_status(), siwx91x_disconnect(), and
siwx91x_ap_disable() to improve code structure and accessibility. This
reorganization prepares the codebase for upcoming integration of
connection and AP enable logic that handles parameter differences.
No functional changes are introduced in this commit.
Signed-off-by: Arunmani Alagarsamy <arunmani.a@silabs.com>
Default the BT Tester to use the overlay-bt_ll_sw_split.conf for all
Zephyr based configurations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a new BT controller configuration that can be applied
to multiple boards and not specific to the nRF5340 cpunet
as the existing setup uses from hci_ipc.
The config is based on nrf5340_cpunet_iso-bt_ll_sw_split.conf
from hci_ipc sample.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The stream_started and stream_stopped callbacks are called for
both broadcast sink and source in the BT Tester, and thus
they should check if the stream can send before attempting
to register it for TX (which would otherwise fail).
This also guards the call to btp_send_bis_syced_ev so that
the event is only sent for broadcast sinks.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This change plays with situation in nRF54L devices where XOTUNE make
LF clock calibration process starts a bit longer. Now HF clock
is configured to be ready right before LF calibration test.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
the k_event_clear in the work might be to late sometimes, when
hawkbit_autohandler_wait() is executed directly after
hawkbit_autohandler(). This leads to getting the events
of the former execution and also not waiting until the
current autohandler run is finished.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Alain Volmat
Maochen Wang
Kyle Micallef Bonnici
dependabot[bot]
Yuval Peress
Aksel Skauge Mellbye
Pisit Sawangvonganan
Daniel Leung
Josuah Demangeon
Tom Chang
Tomasz Leman
Vinayak Kariappa Chettimada
Armin Brauns
James Roy
Jamie McCrae
Benjamin Cabé
Dipak Shetty
Camille BAUD
Adrian Gielniewski
Tim Lin
Fin Maaß
Johan Hedberg
Ayush Singh
Arunmani Alagarsamy
Emil Gydesen
Karol Lasończyk
David Schneider
Krzysztof Chruściński
Dean Sellers