Flexram is really not a memory controller, and does not belong in memc
namespace or directory. Move it to it's own misc directory and remove
memc_ from the namespace.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add possibility to use pinctrl to configure pins that should be assigned
to nRF VPR coprocessors and also provide a way of preventing activation
of the nordic_vpr_launcher driver for an enabled VPR so that it can be
supplied with the code to execute and launched in a custom way.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Replace occurrences of "RaspberryPi" with "Raspberry Pi" in
documentation, comment blocks etc. Correct the name of "PicoW" to
"Pico W", matching Raspberry Pi's documentation at
https://www.raspberrypi.com/documentation/microcontrollers/pico-series.html .
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Replace single-letter function argument names in the FT8xx coprocessor
API with full names of the arguments for better code clarity.
The arguments in the ft8xx_reference_api.h are left as single-ltters to
keep the same function declarations as described in the FT8xx
programming guides.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
When decoding logs from a remote core with memory that APP can
access, wrong address of an array with string addresses was used.
Log message contains index of a string and APP strings array was
used instead of remote core. Extend STMESP logging so that address
of string array of a remote core is send during startup to the APP
and APP is using this array to decode strings from remote cores.
Bug applies only to PPR and FLPR as APP has no access to RAD memory.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
It is no longer possible to use other signatures other than
`int fn(const struct device *)`. Just cast the device pointer,
safe in this context because CONFIG_DEVICE_MUTABLE=y.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since the RA2L1 uses the macro "ICU_EVENT" instead of
"ELC_EVENT" (which is currently used) to input into
the IELSR register, the ek_ra2l1 board cannot assign
any interrupts for any driver.
This commit aim to correct the Event macro to input correct
value for IELSR register on all the Renesas SoC by using
"BSP_PRV_IELS_ENUM" macro.
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
The user of the ft8xx driver can register a callback function called
on a touch detection interrupt event. This function is extended to
include a user-defined pointer. The user-defined pointer helps to share
a callback with multiple driver instances.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
Improve the FT8xx display driver to support multiple driver instances.
The ft8xx_reference_api.h still follows the FT8xx programming guides,
limiting the usage of the driver to one instance.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
Write-back cache after copying VPR's code and data to the destination
memory. It allows VPRs to run from RAM regions cacheable by its host.
It allows to use FLPR in nRF54H20.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Removing period, duty and polarity configuration from
channel devicetree. At boot time, only minimal setup like
pinctrl, prescaler, etc should be initialized. PWM signal
is produced by using pwm_set* API
Also after this change, PWM period, duty are changed at the
next counter period boundary
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
First commit to add support for gpio interrupt on Renesas RA
- Add support for external interrupt driver
- Add support for gpio interrupt config
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Add support for optimized short log messages (aka turbo logs). They are
supported on cpuapp and co-processors owned by cpuapp (FLPR and PPR).
In general, it can be supported if cpuapp has access to logging strings
used for the log message. Currently mode is supported only in standalone
logging. When it is extended for dictionary logging then it will also
be supported on other cores (e.g. cpurad).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The `Kconfig.defconfig` is not good place for put `select PINCTRL`.
Drop `select PINCTL` from `Kconfig.defconfig` and add it at each
driver's Kconfig.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
These two new ICs are variants of the nRF54L15 with different memory
sizes:
- nRF54L05: 500KB RRAM, 96KB RAM
- nRF54L10: 1022KB RRAM, 192KB RAM
- nRF54L15: 1524KB RRAM, 256KB RAM
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use int instead of ssize_t for select_get().
This eliminates the unnecessary need for POSIX types.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The production version of the nRF54L15 SoC is now available, so remove
the initial Engineering A (EngA) preview version.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Extend ETR handler to be able to work as shell backend and multiplex
Coresight STM logging with shell content on the UART used by the
ETR handler. Shell backend works only in the standalone mode.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Use DMM_MEMORY_SECTION instead of a custom macro. When file was created
dmm was not present yet.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Asynchronous API is recommended to be used by ETR buffer handler but
polling is also supported. Imply UART_ASYNC_API so that it is possible
to disable it in project config and fall back to polling if needed. For
example to reduce memory footprint.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Extend ETR buffer handler to support standalone mode where data from
ETR buffer is decoded and printed in human readable format on UART.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add module which is dumping data from Coresight ETR buffer. Coresight
ETR is a sink for STMESP data. This module is specific to Nordic SoC
because it does not access ETR registers. Instead it is using Nordic
specific module (Trace Buffer Monitor TBM) to monitor amount of data
in the ETR buffer (which is a circular buffer).
Data from that buffer is sent over UART (in future it may be extended
to other transports). In future, module will be extended with option
to process STM data on chip.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Kconfig for Seeed Grove LCD RGB Backlight was looking.
Make it depend on DT_HAS_SEEED_GROVE_LCD_RGB_ENABLED.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Updated revision for hal_ethos_u module, and adapted
ethosu_semaphore_take function prototype accordingly in order to align
with changes in the NPU driver
Signed-off-by: Ledion Daja <ledion.daja@arm.com>
Firstly, build-asserting the execution/source memory sizes to be equal
wasn't working, due to the wrong (non-inst) DT API being used.
Secondly, this assert can be relaxed so that the source memory region
only needs to have greater than or equal size to the execution region,
as VPR firmware needs to fit into execution memory first and foremost.
This will come in handy, since MRAM partitions (typical source memory)
have stricter alignment requirements than RAM regions.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Set driver to initialize at early POST_KERNEL, so that we make sure
other future dependencies priorities (eg VEVIF) do not conflict.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
When CONFIG_XIP=y, execution address may come from a partition, so its
absolute address is needed. Fix code by using VPR_ADDR() macro in all
cases: execution and source addresses.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add a custom driver that takes care of loading and launching RISC-V VPR
cores found on the new nRF54 SoCs.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Turning on clock via clock controller and
resetting PIO device via reset controller on initializing.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The Device Multiplexer (devmux) is a pseudo-device that can
be used to select between multiple included sub-devices.
It is experimental, but its current use is in system
remediation. Take for example, the scenario where the
system console and log subsystem both have the uart backend
enabled. The case may arise, where the chosen backing uart
could be an abstraction of another very high-bandwidth bus
- such as a PCIe BAR, a UDP socket, or even even just memory.
If the "service" (for lack of a better term) that backs this
abstract "uart" experiences an error, it is of critical
importance to be able to switch the system console, uart log
backend, or whatever to another uart (semi-transparently) in
order to bring up a shell, continue to view system logs, or
even just support user console I/O.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
This enables and declares interrupt handlers for eMIOS,
the handlers defined and implemented at HAL, the driver
takes the name for each id from interrupt-names devicetree
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
A file just named `init.c` is not that descriptive inside of a project
that has a lot of files of already. Rename to `ethos_u.c`.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
The Ethos-U driver was using IRQ_DIRECT_CONNECT. This is not what the
driver needs as this will not detect a context switch when coming out
of the isr, and this is needed as the isr will release a semaphore.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
There's no need to use APPLICATION level. Also create a custom init
level that runs late in the process (depends e.g. on SPI which runs at
high priority level, 70).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This PR adds a misc driver for NXP S32 eMIOS peripheral.
eMIOS provides multiple unified channels (UCs), there are
several channels can be used as reference timebase
(master bus) for other channels. At this time, the
driver does initialize global configuration for eMIOS
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Added a generic driver for RaspberryPi Pico PIO.
This driver is an intermediate driver for abstracting the PIO
device driver from physical pin configuration.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Signed-off-by: Ionut Catalin Pavel <iocapa@iocapa.com>
`spi_is_ready` function is being deprecated in favor of
`spi_is_ready_dt` so let's replace the old usage in the tree.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Add a driver for the Arm Ethos-U NPU, including a Devicetree entry for
the mps3_an547 platform.
Signed-off-by: Kristofer Jonsson <kristofer.jonsson@arm.com>
Signed-off-by: Fredrik Knutsson <fredrik.knutsson@arm.com>
Declan Snyder
Andrzej Głąbek
Andrew Featherstone
Hubert Miś
Krzysztof Chruściński
Gerard Marull-Paretas
Khoa Nguyen
Fabio Baltieri
Hubert Miś
Dat Nguyen Duy
The Nguyen
Pieter De Gendt
TOKITA Hiroshi
Carles Cufi
Chris Friedt
Karol Lasończyk
Yong Cong Sin
Benjamin Cabé
Jakub Zymelka
Ledion Daja
Grzegorz Swiderski
Mikhail Siomin
Gerard Marull-Paretas
Christopher Friedt
Andrei Emeltchenko
Anas Nashif
Anisetti Avinash Krishna
Ryan McClelland
Nick Ward
Yonatan Schachter
Bartosz Bilas
Kristofer Jonsson