Extend the testcase schema to provide a way to communicate that a given
test is expected to reboot during execution. The generic harness takes
that information and suppresses `already STARTED` warnings if the
restart is expected.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Since BOOT-SERIAL isn't a recognized STMicroelectronics product name,
when Twister saves the new map.yaml, it will also check if the previous
map.yaml had the 'SERIAL-BOOT' product name and attach the corresponding
serial device.It won't generate a new one with an unknown platform name.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Fix missing match on Ztest test case summary log entries, so even
if the test case 'END' log entry is missed or corrupted, its status
will be updated from the Ztest summary log entries, if present.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Kconfig settings of string type is passed to CMake with quotes to ensure
they are properly handled, for example when specified in testcase.yml as
> extra_args:
> - CONFIG_FOO="bar"
Support sysbuild Kconfig settings `SB_CONFIG` by performing the same
quoting for settings starting with `SB_CONFIG_`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
need add protection when check with sysbuild filter out
application, the domains is NULL
fixes: #87163
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Quarantine filter was not correctly identifying the simulator name.
Now it uses the simulator name from the Platform object,
ensuring that quarantined tests are properly excluded or verified
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
The section lists that govern whether the ELF
section is recognised or not are out of date.
A programming bug has rendered the unrecognised
section check unrunnable for years.
Thus, the practically dead code of the
unrecognised section check is removed
in this commit.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Removed logger.setLevel(...) from all twister modules, becasue
there should be only one place where twister loggers are configured,
and the log level should be set in that place.
This should be done in twister_main.py in setup_logging function.
Signed-off-by: Lukasz Fundakowski <lukasz.fundakowski@nordicsemi.no>
Add option to force integration mode on a defined list of tests, for
example tests for sample that are identified with 'sample.'.
A sample per definition shall be tested on documented and supported
platforms listed in the sample documentation. Samples shall not be used
as tests to verify functionality of a feature on all available plaforms
in Zephyr.
To still allow testing on platforms not listed in the doc, and when such
platforms are covered by the provided filter, we should still be able to
build/run the tests on those platforms (not directly listed in
integration_platforms).
We detect a sample by its test identifier, i.e., it starts with 'sample.'.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If BB tests failed, crashed, etc., log handles
could linger and crash test cleanup.
Adding log closing to a `finally` section
should prevent those issues.
Loggers should not be set up as globals,
as it makes testing much harder.
Running multiple Twisters may cause for the
logfiles to be still "in use".
When exiting main, close all logfiles
and remove their handlers from all loggers.
Do that for conftest as well.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Rename the driver from uart_native_posix to uart_native_pty.
Including renaming the DTS compatible, and kconfig options, deprecating
the old ones.
And refactor the driver, generalizing it, so we can have any number of
instances.
Note that, unfortunately generalizing to N instances cannot be done
without a degree of backwards compatibility breakage: This driver was
born with all its configuration and selection of the instances based on
kconfig.
When the driver was made to use DT, it was done in a way that required
both DT and kconfig needing to manually coherently enable the 2nd UART.
This has now been fixed, which it means only DT is used to decide how
many instances are avaliable, and UART_NATIVE_POSIX_PORT_1_ENABLE is
just ignored.
Including:
* Deprecate UART_NATIVE_WAIT_PTS_READY_ENABLE: the options is always on
now as it has no practical drawbacks.
* Deprecate UART_NATIVE_POSIX_PORT_1_ENABLE: DTS intanciation defines it
being available now.
* Rename a few functions and in general shorten pseudo-tty/pseudo-
terminal to PTY instead of PTTY.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
MD5 and SHA1 are not supposed to be used nowadays on security context.
Some ancillary scripts in tree do use them, but for verification only -
or where externally mandated, such the SPDX tool.
This patch marks those usages as `usedforsecurity=False`, which helps
clarify intent.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Rename the driver files, binding and kconfig options, while deprecating
the old binding and kconfig options.
Uses in tree are replaced.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Incremental refactoring.
Fix PEP8 issues to make ruff green for config_parser.py module.
Add __init__.py to twister directory to make it a proper python package,
and make modules importable.
Signed-off-by: Lukasz Fundakowski <lukasz.fundakowski@nordicsemi.no>
Setup logging per process to fix issue on both mac and windows where
handlers are not available to the processes.
Fixes#86237
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
native_sim only works and builds on Linux, when running twister on the
Mac, this platform fails to build and reports errors.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce a new command-line option `--keep-artifacts` in twister that
allows users to specify which artifacts should be preserved
during test cleanup in addition to the default set.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Co-authored-by: Anas Nashif <anas.nashif@intel.com>
These files can be useful to troubleshoot a test that's failing,
and they're really small, too.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
NOTE: Even though previous commits indicate, that this can only happen on
MacOS, that's actually not true. It happens on Linux as well.
The constructor of `psutil.Process` can throw an exception as well, so we
need to wrap the whole loop in another try, unfortunately.
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
While it doesn't cause any issues, it's more consistent and makes future
commits which add handling for more exception types more readable.
Based on: 0df8240b49
Signed-off-by: Michael Zimmermann <sigmaepsilon92@gmail.com>
Problem
-------
Board & SoC extensions are used to define out-of-tree board variants or
SoC qualifiers. When a board is extended, it has multiple directories
associated with it (each with its own `board.yml`), where twister should
be able to find additional platform files to support these qualifiers.
Currently, this doesn't work, because twister only traverses the primary
BOARD_DIR and ignores the rest.
The fix would've been trivial in the case of "legacy" platform files,
i.e. those of the form `<normalized_board_target>.yaml`, but it's less
straightforward for the newly introduced `twister.yaml` format.
A `twister.yaml` file contains platform configuration that can be shared
by multiple board targets and tweaked for specific targets by using the
top-level `variants` key. Normally, there is at most one `twister.yaml`
per board, but the file isn't necessarily unique to one board. Instead,
it's unique to one directory, which may define multiple boards (as is
the case with e.g. `boards/qemu/x86/`).
With extensions in the picture, the goal is to initialize platforms when
given multiple `twister.yaml` per board. The OOT files are expected to
only provide information about OOT board targets, without being able to
override in-tree targets (same principle as in the Zephyr build system).
Solution
--------
The `twister.yaml` handling is broken up into multiple passes - first
loading all the files, then splitting the `variants` keys apart from the
shared configuration, before constructing the Platform instances.
The purpose of the split is to treat the variant information as global,
instead of making unnecessary or faulty assumptions about locality.
Remember that the build system can derive board target names not only
from `board.yml`, but from `soc.yml` too. Considering that any board may
end up using an OOT-extended SoC (and hence multiple `soc.yml` files),
not every board target can be said to belong to some board dir.
Unlike the variant data, the remaining top-level config is still rooted
to the primary BOARD_DIR and inherited by the extension dirs from there.
This is quite intuitive in most imagined cases, but there is a caveat:
if a `twister.yaml` resides in an extension dir, then it is allowed to
have a top-level config of its own, but it will be silently ignored.
This is to support corner cases where, much like how a single board dir
can define multiple boards, a single board dir can also extend multiple
boards, or even do both. In those cases, the primary BOARD_DIR rule
should make it unambiguous which config belongs to which board, even if
it may seem counter-intuitive at first.
For concrete examples of what this means, please see the newly added
platform unit tests.
As part of these functional changes, a good chunk of logic is moved out
of `TestPlan.add_configurations()` into a new function in `platform.py`.
This is because recombining the top-level and variant configs requires
direct manipulation of the loaded YAML contents, which would be improper
to do outside of the module responsible for encapsulating this data.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Allow user to add shell commands in testcase/sample yaml file
alongside the harness_config like in the console harness.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Extended the reason field in Twister report to include
more detailed information for 'Build failure' and
'CMake build failure'
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Introduce a new harness based on pytest that does basic shell command
handling. The harness is enabeld using:
harness: shell
and expects a file with parameters in the form:
test_shell_harness:
- command: "kernel version"
expected: "Zephyr version .*"
- ...
Multiple commands and their expected output can be tested.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When using --coverage-per-instance, collect the test names in lcov, and
add --show-details to the html report to display those test names.
Signed-off-by: Jeremy Bettis <jbettis@google.com>
Instead of capturing the coverage data twice with
--coverage-per-instance, just merge the lcov files in the aggregation
report.
Signed-off-by: Jeremy Bettis <jbettis@google.com>
When pytest is executed, it only writes logging messages to the twister
harness, and does not include information about any test assertion
failures. This information is printed to stdout, so simply write
the contents stdout to the harness log.
Remove the log file arguments previously passed to pytest, as these are
no longer needed.
Signed-off-by: Daniel DeGrasse <ddegrasse@tenstorrent.com>
In `--coverage-per-instance` mode for 'gcovr' merge individual
coverage.json reports into the aggregate code coverage report
instead of processing .gcda data files again.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
With this change, the coverage data (GCOV dump) is extracted from the
test log files after each of the test instance parallel execution,
instead of post processing all the logs at the end of the Twister run.
The new `--coverage-per-instance` mode extends Twister coverage operations
to report coverage statistics on each test instance execution individually
in addition to the default reporting mode which aggregates data to one
report with all the test instances in the current scope of the Twister run.
The split mode allows to identify precisely what amount of code coverage
each test suite provides and to analyze its contribution to the overall
test plan's coverage. Each test configuration's output directory will have
its own coverage report and data files, so the overall disk space and
the total execution time increase.
Another new `--disable-coverage-aggregation` option allows to execute
only the `--coverage-per-instance` mode when the aggregate coverage
report for the whole Twister run scope is not needed.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Group Twister code coverage command line arguments for better usability.
Add more details in descriptions.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
In situations where a test won't be run because there is a gap
in the hardware support, add the gap information to the "reason"
field to aid in debugging test cases.
With this change, the reason field for the error in test case
will show the gap:
e.g. reason field now updated with gaps
"No hardware support {'usbd'} but is one of the integration platforms"
Signed-off-by: David Leach <david.leach@nxp.com>
Actually using the error count before clearing it
would probably be more useful.
ExecutionCounter's error count was set to 0
before being used to lower the done count properly.
This should fix in-progress overcounting,
where Twister claimed to execute more tests than planned.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Refactor Reporting to use custom ReportingJSONEncoder and encode
all pathlib.Path derived instances there which are possible
e.g. in 'environment.options' received from command line.
Fixes: #83823
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Device adapter strips all whitespace from output lines causing test
failures when matching default shell prompt "uart:~$ " with trailing
space. Update _handle_device_output to only strip line endings (\r\n)
while preserving whitespace required for prompt detection.
A testcase sample.pytest.shell.no_vt100 was added to verify prompt
matching works with CONFIG_SHELL_VT100_COLORS disabled.
Signed-off-by: Thomas Günther <thomas.guenther@limatica.com>
This commit removes all references to the `xtools` toolchain variant in the
twister scripts.
Note that the `xtools` toolchain variant has been deprecated since Zephyr
v3.3.0 and now removed.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Extend Twister Harness 'recording' feature to allow multiple
regular expression patterns to extract different types of records
from test output.
Add 'merge' recording mode to collect all extracted data fields
into a single record object of the test instance.
Export to CSV file now takes all field names occurred in the collected
records, sort it alphabetically, and then use it for columns instead of
using only the first record's fields. This is done to address possible
situation when records have different set of fields.
Adjust Twister documentation and test suite to the above changes.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Jordan Yates
Fabrice DJIATSA
Dmitrii Golovanov
Torsten Rasmussen
Arkadiusz Cholewinski
Reto Schneider
Hake Huang
Grzegorz Chwierut
Lukasz Mrugala
Anas Nashif
Lukasz Fundakowski
Alberto Escolar Piedras
Ederson de Souza
Benjamin Cabé
Michael Zimmermann
Grzegorz Swiderski
Armin Kessler
Jeremy Bettis
Erwan Gouriou
Daniel DeGrasse
David Leach
Thomas Günther
Stephanos Ioannidis
Sylvio Alves
Pieter De Gendt