This commit fixes#54492 where return code 1 is returned
when twister tests fail when twister is called directly and
return code 0 in similar scenario but twister is invoked using
west.
Signed-off-by: Andrey Borisovich <andrey.borisovich@intel.com>
This is a partial revert of commit
2cee5ff519
("scripts: west_commands: runners: remove deprecated options").
I remarked at the time that the removal of the older way of writing
things from the runners themselves seemed gratuitous since they are
easy to continue to support indefinitely and people may have been used
to the old way of doing things. It didn't seem worth the fight to push
for a revert at the time, though.
Since then I've run into real problems that their removal has caused
in the wild and I am convinced that this part of that patch was wrong.
Restore the original, undeprecated forms of these options, but make it
clear in the command line help that they're just obsolete alternative
spellings at this point.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Currently we just pass in case of the unsupported jtag adapter
is selected. Fix that by rising ValueError as we do in case of
other incorrect arguments.
While I'm at it add few missing test-cases for mdb west runners.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Currently, in case of multi-core target or in case jtag adapter
auto-selectio, we pass unexpected empty argument (empty quotes `''`)
to MDB binary due to argument generation error.
Fix that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Remove code which looking for `cld` process pid - this functionality
isn't use anymore by twister. And as manual MDB termination is also
fixed now this functionality isn't required for anything now.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Currently we try to start MDB (MetaWare Debugger) in background
with ignored sigint no matter if we are planing to do debug
session (via `west debug`) or just run something on HW or on
nSIM (via `west flash`)
That cause really bad user experience as after we do
`west debug` or `west flash` we can't terminate the debugger
from the console. Moreover even if we terminate the debugger
process from separate terminal the console stil would be
broken so we need to do `stty sane` in it to make it usable
again.
Fix all that by proper starting the debugger process.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This will allow something like this:
west build -b qemu_x86 -T samples/hello_world/sample.basic.helloworld
instead of:
cd samples/hello_world
west build -b qemu_x86 -T sample.basic.helloworld
Using this option will allow to take twister output and just pass it to
west to reproduce failures.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Disables allowing the python argparse library from automatically
shortening command line arguments, this prevents issues whereby
a new command is added and code that wrongly uses the shortened
command of an existing argument which is the same as the new
command being added will silently change script behaviour.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add some logic in blackmagicprobe.py to guess the GDB serial port based
on the OS instead of just trying the flag or /dev/ttyACM0.
The new logic explicitly looks for the well known path for BMP on Linux
(/dev/ttyBmpGdb), so that we can remove it from the board files that
have it set explicitly right now. At the same time it still allows
setting the port from the flag and also checks an environment variable,
so that it can be used for systems with multiple probes.
As a fallback, it looks for a valid serial port, picking the first one
(the probe creates two, the GDB one is the first one), and raise an
exception if nothing is found.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Recently the blackmagicprobe command for "connect under reset" has been
updated from "connect_srst" to "connect_rst". Update the flag name in
the west blackmagicprobe binding, keep the old one as well for
compatibility with out of tree boards, and send both the old and new
commands to GDB so that it works with both the old and new firmware. GDB
is going to get a "command not supported by this target" for one of the
two and proceed with the other one.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add SDO block transfer support for the CANopen program download west
runner. SDO block transfers are experimental in the underlying CANopen for
Python.
Reduce the program download chunk size to half the program download buffer
size to avoid blocking IO.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Make sure that this runner can handle multiple --tool-opt arguments,
and that the options specified for pyocd are passed to that tool in
order.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The --snr (nrfjprog) --id (jlink) and --board-id (pyocd) options were
deprecated a long time ago in favor of --dev-id. It is time to remove
them.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fixes for the following issues that a new version of mypy started
reporting recently:
runners/trace32.py:34: error: Incompatible default for argument
"startup_args" (default has type "None", argument has type
"List[str]") [assignment]
runners/trace32.py:137: error: Incompatible default for argument
"cfg" (default has type "None", argument has type "Path") [assignment]
runners/trace32.py:34: note: PEP 484 prohibits implicit Optional.
Accordingly, mypy has changed its default to no_implicit_optional=True
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
in some builds there is need to pass different value for -i parameter
and current code will override it to 3
Also in rimage i parameter is by default set to 3
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Since twister can make use of domains.py as well, refactor west's use
this file so that domains.py can be moved to a generic library folder.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Currently, it is not possible to use a normal flash command to flash two
hex files that contain data in the UICR region, even though these
data don't conflict with each other.
However, that is not a technical limitation of the device, but of the
nrfjprog runner as it fails as soon as the hex file contained UICR data
and there was no --force/--erase/--recover used.
That approach was used in the past as program operation was used
without --verify, but as this option was added a while ago it is an
unnecessary limitation.
If the UICR wasn't erased before programming, the verify of the program
operation will now fail, so giving the user a warning in this case that
the hex files contain data in the UICR will still give the user a hint
of what might have caused the failing verify.
Additionally, it enables partial programming of the UICR without the
use of the --force option.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
This patch introduces a West runner for flashing and debugging with
Lauterbach TRACE32 debuggers. The runner consists of a wrapper around
TRACE32 software, and allows a Zephyr board to execute a custom start-up
script (Practice Script) for the different commands supported, including
the ability to pass extra arguments from CMake. Is up to the board using
this runner to define the actions performed on each command.
The `debug` command launches TRACE32 GUI to allow debug the Zephyr
application, while the `flash` command hides the GUI and executes the
start-up script in a background process.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
We need to give gdb slash-separated paths to ELF files on Windows.
Just make sure we always have slash-separated paths. We use this
technique in various places around the tree.
Fixes: #50789
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Instead of 'reset halt', default the command to reset and halt the target
to 'reset init'.
OpenOCD strictly requires 'reset init' to halt and prepare the device
before flash programming.
See https://openocd.org/doc/html/Flash-Commands.html chapter
"12.2 Preparing a Target before Flash Programming."
For targets implementing the init hook, it will allows to perform some
target specific init improvements (such as speed flash improvements).
Targets not implementing this hook will end up executing the usual and
previous 'halt'.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Although 8644b333cd added support for some
missing commands an options, the bash completion file was still in bad
need for some cleanup, fixes and additions.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
With revision 7.70d, Segger changed the command line interface of the
jlink client, requiring some flash specific information, such as
the base address and the type of memory, e.g. QSPI.
This commit adds an optional argument to the West jlink runner,
'--loader' which passes the information to the jlink client.
This change is backward compatible with versions of jlink older
than v7.70d which introduces the CLI change.
Fixes: #50327
Signed-off-by: Yves Vandervennet <yves.vandervennet@nxp.com>
When using west runners with multi domains we want to warn users when
they user runner args on multi domain builds.
Therefore fix the `>1` to the correct `>0` which ensures the warning
is printed in all expected cases.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
As part of the overall work on improving west integration with Zephyr,
add support for zsh completion in the `west completion` command.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This adds support for ezFlashCLI tool to allow flashing DA1469x MCU
family from Renesas.
The tool is available at https://github.com/ezflash/ezFlashCLI or can
be installed via pip.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Signed-off-by: Ben Lauret <ben.lauret.wm@renesas.com>
Allows to use the stm32cubeprogrammer runner on Linux to be executed
from any installation directory as long as the executable is found
in PATH.
Until now on Linux the programmer could only be used if it either has
been installed in the default location or if the executable path was
passed via the cli parameter.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
In preparation for the handling of taint flags in zephyr_module.py, move
blob-processing code from the west command to it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Turns out that `Namespace.format` was not a good fix to the issue
described in f033040812, it was returning
the default format even when the user specified -f/--format.
Replace "getattr" with a simple logical operation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
There were two issues with the original commit
e04487cad2b98385c850fa478e1d1ca97bf0e836:
- getattr() doesn't seem to work properly with args
- Comparison between bound methods with "is" seems not to work, so
replace it with a simpler string comparison
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Make some no-op log messages require 'west -v blobs ...'.
The current implementation won't scale as the number of blobs goes up.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This option does not apply to 'west blobs clean' or 'west blobs
fetch'. Error out if it is given to either of those.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Make it consistent with the usual argparse style by using lower case
and no period at the end.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The help text is mixing up 'blobs' with 'modules', and doesn't
document the new behavior that uses all modules when nothing is
mentioned. Fix both issues.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Without this patch, "west blobs -h" says:
{list,fetch,clean} Select the sub-command to execute. Sub-commands
available: - list: list binary blobs - fetch: fetch and store binary
blobs - clean: remove fetched binary blobs
With this patch:
{list,fetch,clean} sub-command to execute
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It looks like the latest release, 0.14.2, changed the contents of
JLINK_SDK_NAME as it was before 0.14.0 release. That means that the
previous fix is only applicable to a couple of releases: 0.14.0/0.14.1.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The introduction of sysbuild and west build / flash / debug / etc.
support raises questions regarding how to handle user specified runner
arguments.
Some arguments may be acceptable for all domains, whereas others are
only valid for a single or few domains in a multi domain build.
Therefore, consider the usages of runner specific options experimental
when applied to multiple domains.
The following warning is printed to the user when using runner specific
arguments on multiple domains:
> WARNING: Specifying runner options for multiple domains is
> experimental.
> If problems are experienced, please specify a single domain using
> '--domain <domain>'
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The `<module>/zephyr/blobs/` folder, as well as any additional
sub-folders that might be required under `blobs/` may not exist when
fetching a blob. Ensure that the folder exists, create it if it doesn't.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The new "clean" blobs sub-command deletes any blobs present on the
filesystem.
Also improve the help text for sub-commands.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To align with other commands, such as "west update", convert the
accumulative -m option into an nargs="*"-type one that takes the list of
modules directly without a flag.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Instead of both listing and fetching only the blobs in the
modules listed by the user in the command-line, default to
listing/fetching them all for ease-of-use and consistency with other
commands. Remove the --all options since it's meaningless now.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove ZEPHYR_BASE as default root in list_boards.py.
This allows list_boards.py to be used to only print boards at given
root(s) without printing Zephyr default boards.
Secondly it remove the need in list_boards.py to have any knowledge of
ZEPHYR_BASE.
The `west boards` command already has ZEPHYR_BASE knowledge and can
easily add ZEPHYR_BASE to the list of roots it is already constructing,
thus removing the need for knowing that ZEPHYR_BASE is always added.
Update boards.cmake to pass ZEPHYR_BASE as an additional arch root, as
arch.cmake has not yet been processed,which means ZEPHYR_BASE is missing
in ARCH_ROOT list at this point in time.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add parameter for possible extending in the future, --tool-opt
passes arguments to execution of the run service.
Ex.
--tool-opt=--arg='white space' --tool-opt=-r --tool-opt=12345
will be parsed as ['--arg=white space', '-r', '12345']
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
Add specifying the port for the remote cavstool remote service.
Ex.
west flash --remote-host {host}:{port} \
--pty {host}:{port}
Specify the port is optional when running west.
And another major change is now we have to specify the remote log
service by --pty to make it output the log message immediately.
Previously it will output directly. Why we make this change is
because this is more close to the behavior we use west flash.
Fixes. #46865
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
This patch introduces the basic infrastructure to list and fetch binary
blobs. This includes:
- The new 'blobs' extension command
- An implementation of the `west blobs list` command
with custom formatting
- A very simple mechanism for loading fetchers
- A basic implementation of an HTTP fetcher
In order to ensure consistency among the west extension commands in the
main zephyr tree, we reuse a similar class factory pattern that is present
for ZephyrBinaryRunner instances in the ZephyrBlobFetcher case. This
could be achieved with a simpler mechanism, but opted for consistency
before simplicity.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The boards command was not properly using the zephyr_module
functionality to obtain the board roots of all modules. Fix that by
moving the functionality required to the core zephyr_module file and
reuse it from external scripts.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Andrey Borisovich
Marti Bolivar
Evgeniy Paltsev
Anas Nashif
Jamie McCrae
Fabio Baltieri
Al Semjonovs
Henrik Brix Andersen
Gerhard Jörges
Gerard Marull-Paretas
Adrian Bonislawski
Daniel DeGrasse
Markus Swarowsky
Manuel Arguelles
Erwan Gouriou
Carles Cufi
Yves Vandervennet
Torsten Rasmussen
Andrzej Kaczmarek
Thomas Stranger
Enjia Mai