These ignores were added with an older version of pylint and are
either removed or ignored by default.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Previous OpenOCD version finding would fail when additional tokens were
prepended to the 'openocd --version' output, as happens with some third-
party OpenOCD repackages (xPack for one).
Fixes: #71955
Signed-off-by: Nick Kraus <nick@nckraus.com>
mypy fails with:
Incompatible types in assignment
(expression has type "None", variable has type "Type[ELFFile]")
this happens because of the code:
try:
from elftools.elf.elffile import ELFFile
except ImportError:
ELFFile = None
ELFFile is set to None to allow later code to check if ELFFile was
imported by checking against None. Instead of setting ELFFile to None,
then update testing code to check if the class has been loaded, as:
if globals().get('ELFFile') is None:
Update the try-catch to `pass`.
Removed ELFFile cargo cult from intel_cyclonev.py and fix pylint
warnings.
Disable duplicate code check. The intel_cyclonev.py is already based
upon openocd.py, so although the duplication detection is correct then
this should not prevent other code changes / fixes to those files from
being applied.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add a runner to "flash" and "debug" Cyclone V SoC FPGA Development Kit
the runner is based on OpenOCD and GDB
Signed-off-by: Esteban Valverde <esteban.valverde.vega@intel.com>
Whenever build/zephyr/runners.yaml does not specify the location of the
openocd executable we seemd to be leaving the executable variable as
None. Instead, use its executable name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add yet another option, --verify-only, to west flash. This option
runs openocd with verify_image but without load_image.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
OpenOCD has verify_image command. Add `--verify` option to west flash
so that openocd can do vierfy_image right after load_image.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Always add the boards/<arch>/<board>/support directory to the OpenOCD
runner search path if the directory exists.
This simplifies using custom --config <partial-board.cfg> runner
arguments without having to use the full path to the cfg file.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
#38557 Reordered the argument for openocd, but we should not try
to call the init command before giving the board configuration
file stored in 'self.cfg_cmd'.
Move back this variable to it's original position.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Commits 49bcc08033 introduced
a possible None object 'gdb_init', do not try to iterate over
this variable if it is a None object.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Debugging ESP32 SoCs is not possible if the commands
halt, target and load are enabled by default.
This MR allows this configs to be used as input parameters.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
When enable thread awareness feature for OpenOCD the search path was
converted to a list. In some environments OPENOCD_DEFAULT_PATH may
not be defined. That create an empty search path list system fails.
This add a test to skips fill search_args with openocd_search values
when list is empty.
Fixes#38272.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add support for specifying a custom OpenOCD command to be used for
resetting and halting a target.
As noted in the OpenOCD documentation, not all targets support the
"reset halt" command for halt-on-reset.
Some targets support a software emulation via the "soft_reset_halt"
command. Other targets may require a custom command (e.g. a command
defined in the target configuration file).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Zephyr thread awareness is available for openocd but boards don't
have debuggers configuration. This configure OpenOCD runner
automatically to complete configuration.
User still require enable CONFIG_DEBUG_THREAD_INFO=y to visualize
thread debug information.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Some targets require no 'halt' to be issued i the gdb server command.
Add a --no-halt option to make it possible.
Keep use of halt as the default case.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add support for passing the --config argument to the openocd west runner
multiple times.
This allows for using modular openocd configuration files (e.g. CPU core
configuration in one file, independent of the selected JTAG interface
type).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
There are use cases where --use-elf is given and the hex file does not
exist. Handle them.
Fixes: #31944
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The RunnerConfig class stores the locations of the Zephyr output files
in various formats (elf, hex, bin). A longstanding issue with the
representation is that these might not exist if the corresponding
Kconfig options are not set. For example, if
CONFIG_BUILD_OUTPUT_BIN=n, there is no .bin file.
Change this so the type system knows these are Optional[str], not str.
Fix the runners that use non-ELF outputs so they check for the
existence of the relevant file before using it, mostly using a new
ZephyrBinaryRunner.ensure_output helper.
I'm not going to bother with checking for the ELF file itself; that's
always there as far as I can tell.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Commit 3124c02 ("cmake: flash/debug: refactor runner configuration")
changed the way the hex_file and elf_file inputs in the RunnerConfig
object are created. In particular, they are now host-style paths.
This breaks flashing with openocd on Windows, which doesn't handle that
properly. Fix that by "casting" the internal hex_file and elf_file
attributes to POSIX paths.
Fixes: #28138
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Require all implementations to provide a do_create(), a new
ZephyrBinaryRunner abstract class method, and make create() itself
concrete.
This allows us to enforce common conventions related to individual
runner capabilities as each runner provides to the core via
RunnerCaps.
For now, just enforce that:
- common options related to capabilities are always added, so runners
can't reuse them for different ends
- common options provided for runners which don't support them emit
sensible error messages that should be easy to diagnose and support
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We can just call super() instead of super(MyClassName, self). The
original extra verbosity is likely due to old habits of mine from
Python 2 which are no longer necessary, but got copy/pasted around.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Catch ImportError whenever a non-standard module import fails from any
runners that do one. Complain at runtime about it if the user actually
needs the runner.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
In case of flashing (which is typically used with OpenOCD)
we do reset of the target after programming application binary
in the non-volatile memory.
In case of Elf execution we need to reset the target before
loading Elf sections so that we might be sure our target
is in sane & expected state before we start execution.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
In some cases especially for on-going development & debugging of real
application it might be useful to load and run not from flash but
from RAM in that case there's one catch: we cannot reset the board
after loading memory with our app.
That's because:
a) RAM we use might be either cleared on reset or might enter
unpredictable state with portion of previously loaded data
being corrupted.
b) Reset vector most probably still point to ROM/flash and so
our current application won't be executed on reset.
So instead of "run reset" command of OpenOCD we'll use
"resume 0x12345678". Where 0x12345678 is our application's
entry-point (which BTW may very well not match beginning of
the .text section or link base).
Now to extract the entry-point we need our application's zephyr.elf
and since we already have a requirement for Elf we may use it for
loading because OpenOCD does it perfectly fine moreover automatically
detecting loaded image type (binary, hex, Elf etc).
And to use that nice feature just add "--use-elf" to west's
command-line for boards that use "openocd" runner. Like that:
----------->8--------------
west flash --use-elf
----------->8--------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
To be used in setups with multiple boards attached to the same one
host we need to have an ability to specify precisely which JTAG probe
to use for a particular board.
This is done by passing "ftdi_serial XXX" command to OpenOCD.
And the serial ("XXX") is supposed to be passed from higher level,
typically via west's options. And exactly for that we add another
"openocd" runner option "--serial=XXX" which sets
a Tcl's "_ZEPHYR_BOARD_SERIAL" variable that later gets passed
to OpenOCD's "ftdi_serial" command.
See more discussions on the matter here:
https://github.com/zephyrproject-rtos/zephyr/issues/22543
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
In some cases the config is already provided for us e.g. when setting
OPENOCD_NRF5_SUBFAMILY. Also it looks like config was always supposed to
be optional (there are checks for it on do_run()).
Signed-off-by: Rihards Skuja <rihardssk@mikrotik.com>
Use the folder the config file is in as an additional search directory
for openocd. This way additional files, like custom debug interface
files can be put in the support folder of a board and the openocd.cfg
can use them.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
commit 0df4a53107 changed the behavior of
how openocd commands are passed to openocd. We used to add -c to each
command, now the commands are being added without -c causing an error.
This adds "-c" to all commands instead of just passing a list.
Also fixes#20449.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Let the user specify these arguments as many times as they want:
--cmd-pre-init
--cmd-pre-load
--cmd-post-verify
This makes it a bit easier to handle scripts that need to do a few
things in a row depending on conditions.
Handle --cmd-pre-init and the port arguments properly in the debug
related targets.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
I'd like to support nRF boards in a more generic way, so make it
optional. We can clean up the STM32 files later if there's a lot of
overlap in their .cfg files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
With ST boards it is possible to specify the board ID when flashing using
openocd. This is very useful when having multiple devices connected.
This change allows us to address a device directly:
west flash -- --cmd-pre-init "hla_serial 066BFF535254887767174558"
This needs to be called before init, hence the new option.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is a band-aid to make it more obvious to potential users of 'west
sign' and 'west flash' which hex file they are flashing, when they are
falling back on a binary file, and erroring out when a hex file does
not exist.
Fixes: #18201
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add a check to make sure the hex file exists as that is what we utilize
in openocd to flash. If its missing we report that its likely due to
not having CONFIG_BUILD_OUTPUT_HEX set.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use hex file for flash command, instead of elf file. This allows to
flash signed firmware, which is not available in elf format, by
specifying --hex-file command line argument.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far zephyr.elf file was hardcoded in cmake files. Remove it from
there and use cfg.elf_file from python, which can be overwritten by
specifying --elf-file command line option.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add self.require() checks before running commands. Increase test
coverage, including for this feature, while we are here.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Adds a new argument to the openocd runner to optionally specify the
config file. Updates the rv32m1_vega board to use different openocd
config files for the ri5cy and zero-riscy cores.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
West now supports a mechanism for extension commands. Use it to move
the command implementations that are tightly coupled with boards and
the zephyr build system back into the Zephyr repository.
This patch doesn't include test cases. Those will be moved over in a
subsequent patch.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Pieter De Gendt
Nick Kraus
Torsten Rasmussen
Esteban Valverde
Carles Cufi
Yasushi SHOJI
Henrik Brix Andersen
Julien Massot
Sylvio Alves
Gerson Fernando Budke
Henrik Brix Andersen
Erwan Gouriou
Martí Bolívar
Alexey Brodkin
Rihards Skuja
Christian Taedcke
Anas Nashif
Kumar Gala
Marcin Niestroj
Maureen Helm
Marti Bolivar