Support added for power domain regulation using TISCI added for
devices using the binding ti,sci-pm-domain.
This driver relies on the TISCI layer to make calls to the
device manager core to perform power management.
Signed-off-by: Dave Joseph <d-joseph@ti.com>
This driver triggers the TURN_ON and TURN_OFF actions for certain
power states. These power states are specified via device tree.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The fix 25173f71cd created
`struct pm_device_base` and moved `usage` to it.
This has been overlooked so that I fixed it.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Make it a little bit easier to read using already existent
definitions for the registers used here.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Issue an upstream read transaction through uncached memory to flush
out all pending transactions before power down the host domain.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In many cases suspending or resuming of a device is limited to
just a few register writes. Current solution assumes that those
operations may be blocking, asynchronous and take a lot of time.
Due to this assumption runtime PM API cannot be effectively used
from the interrupt context. Zephyr has few driver APIs which
can be used from an interrupt context and now use of runtime PM
is limited in those cases.
Patch introduces a new type of PM device - synchronous PM. If
device is specified as capable of synchronous PM operations then
device runtime getting and putting is executed in the critical
section. In that case, runtime API can be used from an interrupt
context. Additionally, this approach reduces RAM needed for
PM device (104 -> 20 bytes of RAM on ARM Cortex-M).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The GPIO power domain driver needs device power management enabled
to compile if `PM_DEVICE_POWER_DOMAIN` is enabled.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
use CONFIG_SOC_INTEL_ACE15_MTPM instead of CONFIG_ACE_VERSION_1_5.
CONFIG_ACE_VERSION_1_5 leaked from SOF.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use proper errno.h error codes in pd_intel_adsp_set_power_enable()
instead of -1.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
.bss and .data are uncached in Zephyr builds for intel_adsp. No need
to try to manipulate cache of objects in those sections.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
This patch enhances the power-down sequence for the HOST (HST) domain
within the Intel ADSP ACE 1.5 architecture. It introduces a check to
ensure that a specific condition, represented by a magic key value, is
met before disabling the HST domain. This additional verification step
ensures that the HST domain is only powered down when it is safe to do
so, thereby maintaining the stability and reliability of the system.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
This is a partial revert of one-line from commit 06cfbd4159 ("drivers:
power_domain: Introduce a gpio monitor driver") which not just
introduced a new driver (no problem with that) but also changed the
initialization priority of another, unrelated and existing power domain
driver without even trying to compile it:
https://github.com/zephyrproject-rtos/zephyr/pull/61166#issuecomment-1780959157
```
west config manifest.project-filter -- +sof
west update
west build -b intel_adsp_ace20_lnl modules/audio/sof/app/
ERROR: /soc/ssp@28100 POST_KERNEL 43 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@29100 POST_KERNEL 44 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@2a100 POST_KERNEL 45 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@2b100 POST_KERNEL 46 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@2c100 POST_KERNEL 47 < /soc/dfpmccu@71b00/io0_domain 51
ERROR: /soc/ssp@2d100 POST_KERNEL 48 < /soc/dfpmccu@71b00/io0_domain 51
```
Also note a reviewer (@ceolin) expressed concerns about this unrelated
change but it was ignored:
https://github.com/zephyrproject-rtos/zephyr/pull/61166#discussion_r1357908984
Using `CONFIG_KERNEL_INIT_PRIORITY_DEFAULT` here may be "bad" for some
reason(s) and maybe it should be changed in the future, but it's nothing
compared to breaking _compilation_ of code that has been validated for
months and been released in production
(https://github.com/thesofproject/sof-bin/releases/tag/v2023.09)
So the very urgent thing is to very quickly revert to the previous state
to unblock development. Then we can discuss what is the better thing to
do here.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Power rails of some peripherals are controlled externally.
This is a case in embedded controllers, where the power of
some I2C devices are managed by the main application
processor.
To ensure that zephyr drivers access the devices where is
powered on, introduce a "monitoring" power domain. It works
by registering interrupt handler with gpio a pin, so that
when power state changes, it will notify relevant drivers.
Additionaly add CONFIG_POWER_DOMAIN_INIT_PRIORITY to replace
harcoded init priority.
Fixes: #51349
Signed-off-by: Albert Jakieła <jakiela@google.com>
Disable power management for this particular test case as it expects a
particular pattern of pm get/puts that isn't matched by the driver and
usage in SoF.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Change the power_domain_intel_adsp initialization priority so that it
initializes after the DMA driver that it depends on.
Fixes a few:
ERROR: /soc/dma@72c00 POST_KERNEL 40 69 <
/soc/dfpmccu@71b00/hst_domain POST_KERNEL 75 65
ERROR: /soc/dma@72400 POST_KERNEL 40 66 <
/soc/dfpmccu@71b00/hst_domain POST_KERNEL 75 65
...
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Startup power domains according to the expected final state given the
power supply and PM device runtime support.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Let the driver compile without `PM_DEVICE_POWER_DOMAIN`, in which case
the driver only controls the GPIO, without notifying dependant devices.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Startup power domains according to the expected final state given the
power supply and PM device runtime support.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Let the driver compile without `PM_DEVICE_POWER_DOMAIN`, in which case
the driver only controls the GPIO, without notifying dependant devices.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Device dependencies are not always required, so make them optional via
CONFIG_DEVICE_DEPS. When enabled, the gen_device_deps script will run so
that dependencies are collected and part of the final image. Related
APIs will be also made available. Since device dependencies are used in
just a few places (power domains), disable the feature by default. When
not enabled, a second linking pass will not be required.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Changing function call order. We need to first power-up the power domain
before we turn on the devices.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Only run the `PM_DEVICE_ACTION_TURN_ON` and `PM_DEVICE_ACTION_TURN_OFF`
actions for child devices that have refered to the domain via the
`power-domain` property.
This prevents multiple actions being run for devices that refer to
several power domains, e.g.
```
test_dev: test_dev {
compatible = "test-device-pm";
status = "okay";
power-domain = <&test_reg_1>;
alternate-domain = <&test_reg_chained>;
};
```
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This patch contains several small changes to the intel adsp power
domain.
- include missing header,
- replacing sys_write32/sys_read32 with sys_write16/sys_read16 since
DfPWRCTL is a 16 bit register,
- renaming struct to be more representing what it is,
- passing register address, not a value to the sys_read/sys_write
functions,
- pd_intel_adsp_init is now returning actual status.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Update power_domain drivers to use DT_HAS_<compat>_ENABLED Kconfig
symbol to expose the driver and enable it by default based on
devicetree.
We remove one reference in prj.conf that is no longer needed.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Improve the power domain logging by making the log level configurable
and boosting the log level of the messages printed when the domain turns
on and off.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the Zephyr include paths to be compatible with removing
`CONFIG_LEGACY_INCLUDE_PATH` in the future.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Respect the configured values for how long the domain takes to turn on,
and how long the domain needs to be off for before it can be repowered.
As these actions can block, guard the transition function with
pm_device_action_can_block. To avoid system PM being able to turn the
domain off but not back on again, guard the entire implementation.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move the `pm_device_runtime_init_*` functions from <pm/device_runtime.h>
to <pm/device.h>. The initial device state should be settable
independently of whether `CONFIG_PM_DEVICE_RUNTIME` is enabled.
This also resolves a compilation error when attempting to use these
functions without also including <pm/device.h>.
Function documentation is also updated to be more general than only
referencing runtime PM, as this also applies to system PM and manually
run actions.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Initial implementation of a simple GPIO controlled power domain.
It exposes no API of its own, all functionality is contained inside
the runtime power management callbacks.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Dave Joseph
Mahesh Mahadevan
Laurentiu Mihalcea
TOKITA Hiroshi
Pisit Sawangvonganan
Flavio Ceolin
Krzysztof Chruściński
Jordan Yates
Anas Nashif
Guennadi Liakhovetski
Tomasz Leman
Marc Herbert
Albert Jakieła
Tom Burdick
Nick Ward
Fabio Baltieri
Jordan Yates
Gerard Marull-Paretas
Arsen Eloglian
Kumar Gala
Krzysztof Frydryk